ECJUVB1H102M

Multilayer Ceramic Capacitors(2 Array Type) Multilayer Ceramic Capacitors (2 Array Type) Series: ECJU ■ Recommended Applications ■ Features ● Array of 2 capacitors within 0504 case size ● Single part placement, saving placement time and using less PC board area ● Advanced multi-layer technology that results in high capacitance within a very small packge ● RoHS compliant ● Stabilization of power supply voltages and for filtering of noise ● Bypass capacitor for digital signal lines ■ Handling Precautions See Page 48 to 53 ■ Packaging Specifications See Page 45, 46, 56 ■ Discontinued / Revised Part Numbers, Alternative Part Numbers See Page 54, 55 ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E C J U V Packaging Style Code B P J 1 0 5 M (Example) Product Code (ECJ:Multilayer Ceramic Chip Capacitors) Rated Voltage Code Nominal Capacitance Capacitance Tolerance Code Size Code Temperature Characteristic Code ■ Construction b d 2 3 4 a 1 c 5 No 1 2 3 4 5 Name Ceramic dielectric Internal electrode Substrate electrode Terminal electrode Intermediate electrode External electrode Schematic b d a c ■ Dimensions in mm (not to scale) BW1 W Size Code Size (EIA) U 0504 L 1.37±0.15 W 1.0±0.1 T 0.60 +0.06 –0.10 BW 0.36±0.10 0.52±0.06 BW1 2.0±0.1 0.2+0.2 –0.1 P 0.64±0.10 0.81±0.06 L BW T 0.8±0.1 P ■ Packaging Styles and Standard Packaging Quantity Packaging Style Code V Packaging Styles φ180 reel Size Thickness (mm) Paper taping (Pitch : 4 mm) 0504 T=0.6 4,000 Quantity: pcs. / reel T=0.8 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Apr. 2008 – EC25 – Multilayer Ceramic Capacitors(2 Array Type) ■ Temperature Characteristics ● Class 1 Temperature Temperature Characteristic Code Characteristics C ● Class 2 Temperature Characteristic Code B CH Temp. Coeff. (ppm/°C) 0 ± 60 Rate of Capacitance change at each Temp. (%) –25 °C 85 °C max. min. max. min. 0.49 –0.27 0.39 –0.39 Temperature coefficient: calculated between 20 °C to 85 °C Temperature Characteristics B X7R X5R Capacitance Change ±10 % ±15 % ±15 % Measurement Temperature Range –25 to 85 °C –55 to 125 °C –55 to 85 °C Reference Temperature 20 °C 25 °C 25 °C For applicable “temperature characteristics”, see the lists of standard products on page 27. ■ Rated Voltage Code Rated Voltage 1H DC 50 V 1E DC 25 V 1C, PC DC 16 V 1A, PA DC 10 V PJ DC 6.3 V ■ Nominal Capacitance Ex. Nominal Capacitance 100 10 pF 101 100 pF 103 10,000 pF (0.01 µF) 104 100,000 pF (0.1 µF) 105 1,000,000 pF (1.0 µF) ■ Capacitance tolerance Class 1 2 CH Temperature Characteristics C=10 pF Capacitance range C>10 pF B, X7R, X5R K M ±10 % ±20 % Tolerance Code F Capacitance Tolerance ±1 pF ■ Specifications and Testing Methods Item Operating Temperature Range Dielectric Withstanding Voltage Specifications Class 1 Temp. Char. CH: –55 to 125 °C Class 2 Temp. Char. B, X7R: –55 to 125 °C X5R: –55 to 85 °C No dielectric breakdown and /or damage Test Method ——— Test voltage: Class 1: Rated voltage 300 % Class 2: Rated voltage 250 % Duration: 1 to 5 s Charge/discharge current: 50 mA max. Measuring voltage: Rated voltage Duration: 60±5 s Charge/discharge current: 50 mA max. Measuring temperature: 20±2 °C Class 1 Measuring frequency Measuring voltage 1 MHz ± 10 % 0.5 to 5 Vrms 10000 M or 500/C (M ) Whichever is less Note: 100/C (M ) min. for DC 10 V max. C: Nominal Cap. in µF Capacitance Within the specified tolerance tan δ: Q Factor or Q: Temp. Char. Dissipation Factor C < 30 pF: Q > 400+20 C B, X7R: 0.025 max. (tan δ) 30 pF < C 1000 Please see the technical specifications for details. C: Nominal Cap. in pF Insulation Resistance (I.R.) Class 2 Preconditioning: The capacitors shall be kept in temperature of 150 +0/–10 °C for 1 hour and subjected to standard condition ✽ 48±4 hours before initial measurement. Measuring frequency Measuring voltage 1 kHz ± 10 % 1.0±0.2 Vrms ✽ Standard condition: Temperature 15 to 35 °C, Relative humidity 45 to 75 %. For further information, see the technical specifications. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Apr. 2008 – EC26 – Multilayer Ceramic Capacitors(2 Array Type) ■ Standard Products for EIA “0504”, Taped Version Rated voltage Capaci- Capacitance tance (pF) Tolerance DC 50 V Part No. Dim. T (mm) Temp. Char. CH ● Class 1 ◆ Temperature Characteristic Code: C (Temperature Characteristics: CH) 10 ±1 pF (F) ECJUVC1H100F 0.6 ECJUVC1H220K 0.6 22 47 ±10 % (K) ECJUVC1H470K 0.6 ECJUVC1H101K 0.6 100 Standard packaging quantity of Packaging Style Code “V” (T = 0.6 mm): 4,000 pcs./reel Avoid flow soldering. ● Class 2 ◆ Temperature Characteristic Code: B (Temperature Characteristics: B, X7R, X5R) Rated voltage Capaci- Capacitance tance (pF) Tolerance DC 50 V Part No. Dim. T (mm) B Temp. Char. X7R DC 25 V Part No. Dim. T (mm) B Temp. Char. X7R DC 16 V Part No. Dim. T (mm) Temp. Char. X5R DC 10 V Part No. Dim. T (mm) Temp. Char. X5R ECJUVB1H471M 0.6 470 ECJUVB1H102M 0.6 1000 ECJUVB1H222M 0.6 2200 4700 ±20 % (M) 10000 47000 100000 1000000 Rated voltage Capaci- Capacitance tance (µF) Tolerance DC 6.3 V Part No. Dim. T (mm) Temp. Char. X5R ECJUVB1E472M 0.6 ECJUVB1E103M 0.6 ECJUVB1C473M 0.6 ECJUVBPC105M 0.8 ECJUVB1A104M 0.6 ECJUVBPA105M 0.8 ECJUVBPJ105M 0.8 1 ±20 % (M) ECJUVBPJ225M 0.8 2.2 Standard packaging quantity of Packaging Style Code “V” (T = 0.6 mm, T = 0.8 mm): 4,000 pcs./reel Avoid flow soldering. ■ Cross talk characteristics [Ex.] Temperature Characteristics X5R, 1.0 µF 0 −10 −20 −30 −40 −50 −60 −70 −80 −90 −100 0.1 Measurement Circuit 50 50 Cross talk (dB) 50 1 10 100 Frequency (MHz) 1000 10000 Measuring sample : Mounting to the PC board. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Apr. 2008 – EC27 – 50