ECOS2EG102ZX

厂商：
PANASONIC
封装：
描述：
ECOS2EG102ZX - Snap-in Type - Panasonic Semiconductor

数据手册：

下载ECOS2EG102ZX.pdf

立即购买

详情介绍
数据手册
价格&库存

ECOS2EG102ZX 数据手册

Aluminum Electrolytic Capacitors/ EX Snap-in Type Series: EX Type : TS VDE-0860 specification Endurance : 105°C 2000 h Smoothing circuits, AC adaptor Japan s Features s Recommended Applications s Specifications Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current Dissipation Factor Frequency Correction Factor for Ripple Current Over voltage characteristics 3ÖCV -25 to + 105°C 250 V .DC 100 to 1200 µ F ±20 % (120Hz/+20°C) (µA) max. after 5 minutes application of rated working voltage at +20°C Capacitance(µF) V: W.V. (V.DC) Please see the attached standard products list Frequency (Hz) 50 60 100 120 500 1k 10k to Correction Factor 0.93 0.95 0.99 1.00 1.05 1.08 1.15 After applying 360V.DC for 7 hours at following either temperature, capacitor shall not short-circuit or vent shall not operate. Condition (A) at 70°C Condition (B) at 35°C After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105°C, the capacitor shall meet the following limits. Endurance Capacitance change ±20 % of initial measured value < 200 % of initial specified value D.F. DC leakage current < initial specified value After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in “Endurance”.(With voltage treatment) Shelf Life s Dimensions in mm (not to scale) (10.0) 2-φ2.0±0.1 10.0±0.1 Polarity bar φD+1.0 max P .V.C. sleeve Vent L+2.0 max h Recommended PWB piercing plan (Standard terminal type) 0.8 - 0.1 +0.2 h 4.0±0.5 2.0 max 0.8 - 0.1 +0.2 Terminal 2.0 max (t= 0.8) h 6.3±1.0 (3.5) (4.0) Top of spin Top of spin 1.5 ± 0.2 1.5±0.2 Standard terminal type does not require for cutting off process for terminals. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 Ñ EE173 Ñ Aluminium Electrolytic Capacitors/EX s Condition A (70°C) W.V. Cap. (±20%) Dia. Standard Products Case size Length Specification Part No. Min. PackagingQ'ty (V) (µF) 100 120 150 180 220 (mm) 22 22 22 25 22 25 22 25 30 Ripple (Standard Terminals) D.F. current Terminal Length Terminal Length (120Hz) (120Hz) 4.0mm 6.3mm (+20°C) (+105°C) (Without P.V.C. plate) (Without P.V.C. plate) (mm) (A) (pcs) 200 200 200 200 200 200 200 200 100 200 200 100 200 200 100 100 200 100 100 200 100 100 100 100 100 100 100 100 25 30 30 25 35 30 40 30 25 45 35 30 50 40 30 25 45 35 30 50 40 30 45 35 50 40 45 50 0.70 0.75 0.80 0.80 0.90 0.90 1.00 1.00 1.00 1.10 1.10 1.10 1.20 1.20 1.20 1.20 1.30 1.30 1.30 1.40 1.40 1.40 1.50 1.50 1.70 1.70 2.00 2.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 ECOS2EG101DX ECEC2EG101DX ECOS2EG121EX ECEC2EG121EX ECOS2EG151EX ECEC2EG151EX ECOS2EG151JX ECEC2EG151JX ECOS2EG181FX ECEC2EG181FX ECOS2EG181KX ECEC2EG181KX ECOS2EG221GX ECEC2EG221GX ECOS2EG221KX ECEC2EG221KX ECOS2EG221QX ECEC2EG221QX ECOS2EG271GX ECEC2EG271GX ECOS2EG271LX ECEC2EG271LX ECOS2EG271RX ECEC2EG271RX ECOS2EG331HX ECEC2EG331HX ECOS2EG331MX ECEC2EG331MX ECOS2EG331RX ECEC2EG331RX ECOS2EG331WX ECEC2EG331WX ECOS2EG391MX ECEC2EG391MX ECOS2EG391SX ECEC2EG391SX ECOS2EG391XX ECEC2EG391XX ECOS2EG471NX ECEC2EG471NX ECOS2EG471TX ECEC2EG471TX ECOS2EG471XX ECEC2EG471XX ECOS2EG561TX ECEC2EG561TX ECOS2EG561VX ECEC2EG561VX ECOS2EG681UX ECEC2EG681UX ECOS2EG681YX ECEC2EG681YX ECOS2EG821YX ECEC2EG821YX ECOS2EG102ZX ECEC2EG102ZX 270 22 25 30 250 330 22 25 30 35 390 25 30 35 470 25 30 35 560 680 820 1000 30 35 30 35 35 35 Endurance : 105° C 2000 h Terminal Pitch : 10mm When capacitors of φ 35x45L and φ 35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE174 – Aluminium Electrolytic Capacitors/EX s Condition B (35°C) W.V. Cap. (±20%) Dia. Standard Products Case size Length Specification Part No. (Standard Terminals) Terminal Length Min.PackagingQ'ty (V) (µF) 120 150 180 220 270 (mm) 22 22 22 25 22 25 22 25 30 Ripple D.F. current (120Hz) (120Hz) Terminal Length 6.3mm (+105°C) (+20°C) (Without P.V.C.plate) (mm) (A) 4.0mm (Without P.V.C.plate) (PCS) 200 200 200 200 200 200 200 200 100 200 200 100 200 200 100 100 200 200 200 200 100 100 100 100 100 100 100 100 25 30 30 25 35 30 40 30 25 45 35 30 50 40 30 25 45 35 30 50 40 30 40 35 50 40 45 50 0.75 0.80 0.90 0.90 1.00 1.00 1.10 1.10 1.10 1.20 1.20 1.20 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.50 1.50 1.50 1.70 1.70 2.00 2.00 2.20 2.30 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 ECOS2EG121DK ECEC2EG121DK ECOS2EG151EK ECEC2EG151EK ECOS2EG181EK ECEC2EG181EK ECOS2EG181JK ECEC2EG181JK ECOS2EG221FK ECEC2EG221FK ECOS2EG221KK ECEC2EG221KK ECOS2EG271GK ECEC2EG271GK ECOS2EG271KK ECEC2EG271KK ECOS2EG271QK ECEC2EG271QK ECOS2EG331GK ECEC2EG331GK ECOS2EG331LK ECEC2EG331LK ECOS2EG331RK ECEC2EG331RK ECOS2EG391HK ECEC2EG391HK ECOS2EG391MK ECEC2EG391MK ECOS2EG391RK ECEC2EG391RK ECOS2EG391WK ECEC2EG391WK ECOS2EG471MK ECEC2EG471MK ECOS2EG471SK ECEC2EG471SK ECOS2EG471XK ECEC2EG471XK ECOS2EG561NK ECEC2EG561NK ECOS2EG561TK ECEC2EG561TK ECOS2EG561XK ECEC2EG561XK ECOS2EG681TK ECEC2EG681TK ECOS2EG681VK ECEC2EG681VK ECOS2EG821UK ECEC2EG821UK ECOS2EG821YK ECEC2EG821YK ECOS2EG102YK ECEC2EG102YK ECOS2EG122ZK ECEC2EG122ZK 330 22 25 30 250 390 22 25 30 35 470 25 30 35 560 25 30 35 680 820 1000 1200 30 35 30 35 35 35 Endurance : 105° C 2000 h Terminal Pitch : 10mm When capacitors of φ 35x45L and φ 35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE175 –

下载 PDF

ECOS2EG102ZX

1. 物料型号： - 型号包括EX TS系列，具体型号有ECOS2EG101DX、ECEC2EG101DX、ECOS2EG121EXECEC2EG121EX等。

2. 器件简介： - Panasonic铝电解电容器，符合VDE-0860规范，适用于平滑电路和交流适配器。

3. 引脚分配： - 引脚间距为10mm，对于φ35x45L和φ35x50L型号的电容器，在安装到PCB上时，建议使用安装夹具或粘合剂进行加固。

4. 参数特性： - 工作温度范围：-25°C至+105°C。 - 额定工作电压：250V DC。 - 电容值范围：100至1200μF。 - 电容公差：±20%（120Hz/+20°C）。 - 直流漏电流：3vcV（μA）最大值，在+20°C下施加额定工作电压5分钟后。 - 损耗因数（D.F.）：请参考附加的标准产品列表。 - 纹波电流频率校正因子：根据不同频率有不同的校正因子，例如50Hz时为0.93，60Hz时为0.95等。

5. 功能详解： - 电容器在经过360V DC 7小时的过电压测试后，不应短路或排气。 - 在+105°C下，经过2000小时的直流电压和规定纹波电流的应用后，电容器应满足以下限制：电容变化不超过初始测量值的+20%，损耗因数不超过初始规定值的200%，直流漏电流不超过初始规定值。

6. 应用信息： - 推荐应用包括平滑电路和交流适配器。

7. 封装信息： - 提供了不同直径和长度的封装尺寸，以及对应的纹波电流、损耗因数和终端长度等参数。

ECOS2EG102ZX 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“ECOS2EG102ZX”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

ECOS2EG102ZX

相关技术文章