ECPU1C474MA5

Plastic Film Capacitors Stacked Metallized Plastic Film Chip Capacitor Type : ECPU(A) Stacked dielectric and inner electrode with simple mold - less construction I Features •Low ESR •Max. capacitance values 1.0 µF •Smallest package size in film capacitors 3225/1.0 µF •For reflow soldering •RoHS directive compliant I Recommended Applications •Noise suppressor •Coupling I Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E C P U 1 C Capacitance M Cap.tol A Suffix 5 Suffix Product code Dielectric & construction Rated voltage. 1C 16 VDC 12 Tape width 5 8 mm I Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) Soldering conditions - 40 ˚C to + 85 ˚C 16 VDC 0.10 µF to 1.0 µF (E6) ± 20 % (M) tan C C>0.33 µF : IR=300 MΩ · µF (20 :, 10 VDC, 60 s) Reflow soldering : 240 ˚C max. and 30 sec max. at more than 220 ˚C (Temp. at cap. surface) ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. I Construction I Dimensions in mm (not to scale) Saize code L 2.0 3.2 3.2 3.2 3.2 W 1.25 1.6 1.6 1.6 2.5 H 1.0 0.8 1.0 1.4 1.4 e 0.45 0.65 0.65 0.65 0.65 g > = 0.6 > = 1.0 > = 1.0 > = 1.0 > = 1.0 J1 H1 H2 H3 G2 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors I Taping Specification for Automatic Mounting Refer to the page of taping specifications. I Rating, Dimensions & Quantity/Reel Part No. ECPU1C104MA5 ECPU1C154MA5 ECPU1C224MA5 ECPU1C334MA5 ECPU1C474MA5 ECPU1C684MA5 ECPU1C105MA5 Cap. (µF). 0.10 0.15 0.22 0.33 0.47 0.68 1.0 Dimensions (mm) L 2.0 3.2 3.2 3.2 3.2 3.2 3.2 W 1.25 1.6 1.6 1.6 1.6 1.6 2.5 H 1.0 0.8 0.8 1.0 1.4 1.4 1.4 Size Code J1 H1 H1 H2 H3 H3 G2 2000 3000 Quantity I Recommened for Land Dimensions (mm) Size Code J1 H1 H2 H3 G2 Land dimensions for reflow soldering A 0.8 1.8 1.8 1.8 1.8 B 2.4 3.6 3.6 3.6 3.6 C 1.1 1.4 1.4 1.4 2.3 ❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.