ECQU3A104MG

Plastic Film Capacitors Metallized Polyester Film Capacitor Type: ECQUG[Class X1] In accordance with UL/CSA and European safety regulation class X1 Features •Equipped with a safety mechanism •Flame-retardant plastic case and non combustible resin •RoHS directive compliant Recommended Applications •Interference suppressors Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 E C Q U 3 A Capacitance M G Product code Dielectric & construction Rated vol. Cap. Tol. Suffix M ±20 % Applicable Standard UL CSA SEMKO DEMKO NEMKO FIMKO VDE SEV UL 1414 CSA C22.2 No.1 Across-The-Line Capacitors Antenna-Coupling and Line-By-Pass Components Across-the-line capacitors Antenna-Isolation and line-by-pass capacitors IEC 60384-14 EN 132400 Class X1 ❈ When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUG, 0.1 µF. ❈ Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No.. ❈ European standards marking are VDE and FIMKO only. But, there are no problem using this capacitor in a device which will get approvals from certification bodies in Europe, SEMKO, DEMKO, NEMKO and SEV etc. except VDE and FIMKO. Specifications Category temp. range Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage -40 ˚C to +100 ˚C (85 ˚C max. on UL/CSA spec.) 300 VAC (IEC60384-14), 250 VAC (UL, CSA) 0.010 µF to 1.0 µF (E6) ±20 % (M) tan C C>0.33 µF : IR=5000 MΩ · µF (20 ˚C, 100 VDC, 60 s) > IR=2000 MΩ (20 ˚C, 500 VDC, 60 s) Insulation resistance (IR) ❈ Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave). Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors IDimensions in mm (not to scale) L±1.0 T±0.5 Marking Example STYLE 1 (0.010 µF to 0.22 µF) （a）side .01 µF （b）side ECQUG 300 V∼X1 40/100/21 Date Code （c）side GMF V DE MKT 132400 H±0.5 250 V∼ 20min. F±0.4 d±0.05 ECQUG 2 (0.33 µF to 1.0 µF) 40/100/21 1.0 µF  300 V∼ 250 V∼ X1 GMF V DE MKT 132400 Date Code copper-clad steel wire Q- +1.4 0.6 （ ） C （ ） A （ ） B P （Lead location limits from center) IRating & Dimensions G Capacitance tolerance : ±20 %(M) Part No. ECQU3A103MG ECQU3A153MG ECQU3A223MG ECQU3A333MG ECQU3A473MG ECQU3A683MG ECQU3A104MG ECQU3A154MG ECQU3A224MG ECQU3A334MG ECQU3A474MG ECQU3A684MG ECQU3A105MG L Cap. (µF) 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 Cap.tol.code Dimensions (mm) L 15.0 15.0 15.0 15.0 15.0 15.0 15.0 18.0 18.0 26.0 26.0 26.0 27.0 T 5.0 5.0 5.0 6.0 6.0 8.0 8.0 8.0 9.0 9.0 10.5 12.5 16.5 H 11.5 11.5 11.5 13.0 13.0 15.0 15.0 16.5 17.5 18.5 20.0 22.0 25.5 F 12.5 12.5 12.5 12.5 12.5 12.5 12.5 15.0 15.0 22.5 22.5 22.5 22.5 ød 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 P ±0.5 0 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.5 0±0.75 0±0.75 0±0.75 Q 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.5 1.5 1.5 2.2 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.