ELJFA390JFD

Fixed Inductors (Chip Inductors) 7. Signal Processing Use (Low Distortion Type) DA, FA***D ■ Features ● General use wire wound and resin molded chip inductor. ● Low distortion type suitable for Signal processing. ● 2 line-up of Super low distortion series and low distortion type. ● Good mounting characteristic. ELJDA ELJFA ■ Recommended Applications ● All kinds of Broadband Modem, Router and STB etc. ● Corresponds to sam IC chipset. ■ Explanation of Part Numbers ● Super Low Distortion type 1 2 3 4 5 6 7 8 9 10 11 E L J D A 6 8 0 J F Packaging Design No. Product code Chip Inductors DA Shape 3225 (1210) Size : mm (inch) Inductance 390 470 560 680 820 101 39 µH 47 µH 56 µH 68 µH 82 µH 100 µH Inductance tolerance J ±5 % F Taping ● Low Distortion type 1 2 3 4 5 6 7 8 9 10 11 E L J F A 6 8 0 J F D Packaging Design No. Product code Chip Inductors FA Shape 3225 (1210) Size : mm (inch) Inductance 390 470 560 680 820 101 39 µH 47 µH 56 µH 68 µH 82 µH 100 µH Inductance tolerance J ±5 % F Taping D Low distortion type ■Storage Conditions : Normal temperature (–5 to 35 °C), normal humidity (85 %RH max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. ● Operating Temperature : –20 to +85 °C ● Package ■Storage Period ● Solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation of tin-plated terminals. Even if storage conditions are within specified limits, solderability may be reduced with the passage of time. Therefore, please control the storage conditions and try to use the product within 6 months of receipt. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Nov. 2009 Fixed Inductors (Chip Inductors) ■Packaging ■Soldering Conditions ■Safety Precautions Refer 27 and 28 page. Refer 29 page. Refer 30 page. ■ DA/FA***D Type 3225(1210) ● Dimensions in mm (not to scale) Marking ● Recommended Land Pattern in mm (not to scale) 1.9 to 2.4 2.5±0.2 1.9±0.1 1.6 to 2.0 3.2±0.3 4.0 to 4.6 2.2±0.2 ■ Standard Packing Quantity ● 2000 pcs./Reel 0.6±0.2 ■ Standard Parts(Super Low Distortion type) Part No. ELJDA390JF ELJDA470JF ELJDA560JF ELJDA680JF ELJDA820JF ELJDA101JF (µH) 39 47 56 68 82 100 Inductance Tolerance Test Freq. (%) (MHz) Q min. Test Freq. (MHz) SRF ✽1 (MHz) min. 11 10 8.5 7.5 7 7 RDC ✽2 ( ) max. 5.2 5.9 6.5 9.0 10.0 13.0 DC Current (mA) max. 110 105 100 85 80 70 J : ±5 % 2.52 21 19 24 2.52 0.796 0.796 ✽1 : Self Resonant Frequency ✽2 : DC Resistance ■ Standard Parts(Low Distortion type) Part No. ELJFA390JFD ELJFA470JFD ELJFA560JFD ELJFA680JFD ELJFA820JFD ELJFA101JFD (µH) 39 47 56 68 82 100 Inductance Tolerance Test Freq. (%) (MHz) Q min. Test Freq. (MHz) SRF ✽1 (MHz) min. 12 12 12 12 10 10 RDC ✽2 ( ) max. 6.0 6.7 7.0 9.0 12.0 14.0 DC Current (mA) max. 105 100 95 85 75 70 J : ±5 % 2.52 30 2.52 0.796 20 0.796 ✽1 : Self Resonant Frequency ✽2 : DC Resistance Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Nov. 2009