ELKEA221FA

Coil type EMI Filters Coil type EMI Filters (Digital Noise Filters) Series: ELKE ■ Features ● 3218 case size, 6 A rated current (ELKEA) and 2 A rated current (ELKE). ● High ESD suppression with varistor and included coils. ● No variation in attenuation characteristics as current changes. ● The stable P/N marking using laser technology makes the part number check easier. ■ Recommended Applications ● Data lines, secondary power supply lines (DC lines) for game, digital AV and communications equipment. ■ Explanation of Part Numbers [ELKE, ELKEA Series] 1 2 3 4 5 6 7 8 9 10 E L Product Code K E Model A Type 1 0 Capacitance 3 F A Packaging Design No. E 3218 (1207) size : mm (inch) A Nil 6 A model 2 A model F Embossed taping A Use only for reflow soldering [ELKEV Series] 1 2 3 4 5 6 7 8 9 10 E L Product Code K E Model V Type 3 5 Capacitance 2 F C Packaging Design No. E 3218 (1207) size : mm (inch) V Included varistor F Embossed taping Circuit voltage F E C 15 V 12 V 5V ■ Construction 1 2 No. 1 2 3 4 Part Name Enclosure Coil Terminal Capacitor Material PPS resin mixed with ferrite powder Copper alloy plate Copper alloy plate with SnCu Chip capacitor 3 4 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Dec. 2009 Coil type EMI Filters ■ Dimensions in mm (not to scale) P/N, Date Code ■ Land Pattern in mm (not to scale) 2.2 1.8 1.8 0.8 2.2 5.0 Top tape Embossed carrier tape Reel Terminal Product Product Pocket Empty Pocket Leader tape 260 °C max. 230 °C 30 to 40 s Time 0.8 2.3 3.2 0.7 ■ Packaging state Content indication 0.8 Reel Size : φ178 Q’ty : 2000 pcs./Reel Packaging : Embossed taping Reel Pulling direction ■ Soldering conditions for reflow 300 Temp. (°C) 200 180 °C 150 °C 100 0 60 to 120 s ■Storage Conditions : Normal temperature (–5 to 35 °C), normal humidity (85 %RH max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. ● Operating Temperature : –20 to +85 °C ● Package ■Storage Period ● Solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation of tin-plated terminals. Even if storage conditions are within specified limits, solderability may be reduced with the passage of time. Therefore, please control the storage conditions and try to use the product within 6 months of receipt. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2.6 Nov. 2007 Coil type EMI Filters Large Current Coil type EMI Filters (Digital Noise Filters) SMD Series: ELKEA ■ Features changes. ● 3218 case size, 6 A rated current. ● No variation in attenuation characteristics as current ● The stable P/N marking using laser technology makes the part number check easier. ■ Typical Specification ● ● ● ● Operating temperature : –20 to +85 °C Rated Voltage : DC 50 V (Except ELKEA333FA : DC25 V) Rated Current : DC 6 A Reliability characteristics endurance (High Temp.) Soldering condition (reflow) : 85 °C 50 V 6 A 1000 h (Spec : 500 h) ■ Standard Parts Part No. ELKEA100FA ELKEA220FA ELKEA470FA ELKEA101FA ELKEA221FA ELKEA471FA ELKEA102FA ELKEA222FA ELKEA103FA ELKEA333FA Cut off frequency (MHz) 500 300 150 70 30 15 7 3 0.5/DC 0.2/DC Inner Capacitance (pF typ.) 10 22 47 100 220 470 1000 2200 10000 33000 Rated Voltage (V) Rated Current (A) Indication 100 220 470 101 221 471 102 222 103 333 min. Packaging unit (pcs.) 50 Indication 2 2000 6.0 25 Indication 1 Indication 2 note1 : 4th letter ( ) of marking indicates the Month Code. note2 : Indication 1, 2 refer to Indication examples. ■ Performance characteristics (Reference) ELKEA 10 0 100 -10 Attenuation (dB) 222 -20 -30 -40 -50 -60 103 333 221 471 102 220 470 101 ■ Equivalent circuit, measurement block diagram FA L L C 50 50 VV SG 1 10 100 Frequency (MHz) 1000 10000 ■ Indication Examples Indication 1 Top View Indication 2 103P Side View Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 222P ELKEA103FA ELKEA100FA ELKEA220FA ELKEA470FA ELKEA101FA ELKEA221FA ELKEA471FA ELKEA102FA ELKEA222FA ELKEA333FA 103P Month Code : 1 Letter Inner Capacitance : 3 Letters Dec. 2009 Coil type EMI Filters Coil type EMI Filters (Digital Noise Filters) SMD Series: ELKE ■ Features changes. ● 3218 case size, 2 A rated current. ● No variation in attenuation characteristics as current ● The stable P/N marking using laser technology makes the part number check easier. ■ Typical Specification ● ● ● ● Operating temperature : –20 to +85 °C Rated Voltage : DC 50 V (Except ELKE333FA : DC25 V) Rated Current : DC 2 A Reliability characteristics endurance (High Temp.) Soldering condition (reflow) : 85 °C 50 V 2 A 1000 h (Spec : 500 h) ■ Standard Parts Part No. ELKE100FA ELKE220FA ELKE470FA ELKE101FA ELKE221FA ELKE471FA ELKE102FA ELKE222FA ELKE103FA ELKE333FA Cut off frequency (MHz) 250 200 100 50 25 10 5 2 0.5/DC 0.2/DC Inner Capacitance (pF typ.) 10 22 47 100 220 470 1000 2200 10000 33000 Rated Voltage (V) Rated Current (A) Indication 100 220 470 101 221 471 102 222 103 333 min. Packaging unit (pcs.) 50 2.0 2000 25 note1 : 4th letter ( ) of marking indicates the Month Code. ■ Performance characteristics (Reference) ELKE 10 0 -10 Attenuation (dB) -20 -30 -40 -50 -60 102 222 103 333 101 221 471 100 220 ■ Equivalent circuit, measurement block diagram FA L L C 50 50 VV 470 SG 1 10 100 Frequency (MHz) 1000 10000 ■ Indication Examples 103P (Top View) (Side View) 103P Month Code : 1 Letter Inner Capacitance : 3 Letters Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Dec. 2007 Coil type EMI Filters Varistor included Coil type EMI Filters (Digital Noise Filters) SMD Series: ELKEV ■ Features ● High ESD suppression with varistor and included coils. ● No variation in attenuation characteristics as current changes. ● The stable P/N marking using laser technology makes the part number check easier. ■ Typical Specification ● ● ● ● Operating temperature : –20 to +85 °C Rated Voltage : Applicable normal voltage for varistor Rated Current : DC 2 A Reliability characteristics endurance (High Temp.) Soldering condition (reflow) : 85 °C 50 V 2 A 1000 h (Spec : 500 h) ■ Standard Parts Part No. ELKEV150FF ELKEV300FF ELKEV161FF ELKEV431FF ELKEV561FE ELKEV112FC ELKEV352FC Cut off frequency Inner Capacitance (MHz) (pF typ.) 250 200 50 20 10 8 1/DC 15 30 160 430 560 1050 3500 Rated Voltage (V) 27 27 27 27 22 12 12 Applicable circuit voltage (V max.) 15 15 15 15 12 5 5 Indication 150 300 161 431 561 112 352 min. Packaging unit (pcs.) 2.0 2000 Note1 : 4th letter ( ) of marking indicates the Month Code. ■ Performance characteristics (Reference) 10 ■ Equivalent circuit, measurement block diagram ELKEV F 0 L Attenuation (dB) -10 431 561 -20 102 -30 352 161 150 50 50 VV 300 C L SG -40 -50 1 10 100 Frequency (MHz) 1000 10000 ■ Indication Examples 352P 352P Month Code : 1 Letter Inner Capacitance : 3 Letters Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Dec. 2007 Coil type EMI Filters Safety Precautions (Common precautions for Coil type EMI Filters) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (au to mo bile, train, vessel), traffi c lights, medical equipment, aerospace equipment, elec tric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault Precautions for use 1 T hese products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric applianc es, offi ce equipment, information and com mu nication equipment) 2 These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. • In liquid, such as water, oil, chemicals, or organic solvent • In direct sunlight, outdoors, or in dust • In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 • In an environment where these products cause dew condensation 1. Operation range and environments 2. Handling 1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can change the inductance value. 2 Do not apply strong mechanical shocks by either dropping or collision with other parts. Excessive schock can damage the part. 3. Land pattern design 1 Please refer to the recommended land pattern for each type shown on the datasheet. 2 In case of reflow soldering, consider the layout because taller components close to EMI filters tend to block thermal conduction. 4. Mounting 1 Avoid excessive placement force. 2 Do not bend or twist the PWB after mounting the part. 1 Do not use acid or alkali agents. Some cleaning solvents may damage the part. Confirm by testing the reliability in advance of mass production. 2 If Ultrasonic cleaning is used, please confirm the reliability in advance. It is possible that combined resonance of component and PWB and cavitation can cause an abnormal vibration mode to exist causing damage. 5. Cleaning Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008