LN21RPX_08

This product complies with the RoHS Directive (EU 2002/95/EC). Light Emitting Diodes LN21RPX Round Type φ5.0 mm  bsolute Maximum Ratings Ta = 25°C A Parameter Power dissipation Forward current Pulse forward current * Reverse voltage Operating ambient temperature Storage temperature Symbol PD IF IFP VR Topr Tstg Rating 70 25 150 4 –25 to +85 –30 to +100 Unit mW mA mA V °C °C  ighting Color L  ed R Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.  lectro-Optical Characteristics Ta = 25°C E Parameter Luminous intensity Reverse current Forward voltage Peak emission wavelength Spectral half band width IO  IF Symbol IO IR VF λP Δλ VR = 4 V IF = 20 mA IF = 20 mA IF = 20 mA IF  VF 2.2 700 100 Relative luminous intensity  Ta Conditions Min 1.5 Typ 4.0 5 2.8 Max Unit mcd µA V nm nm 100 100 1000 30 Forward current IF (mA) 50 50 30 Relative luminous intensity (%) 1.6 1.8 2.0 2.2 2.4 Luminous intensity IO (mcd) 500 300 10 5 3 10 5 3 100 50 30 1 1 3 5 10 30 50 100 1 10 −20 0 20 40 60 80 100 Forward current IF (mA) Forward voltage VF (V) Ambient temperature Ta (°C) Relative luminous intensity (%) Relative luminous intensity  λP 100 80 60 40 20 0 600 600 700 800 80° 90° 100 80 60 40 20 40° 50° 60° 70° IF  Ta 50 Directive characteristics 30° 20° 10° 0° 80° 60° 40° 20° 0 20 40 60 80 10° 20° 30° 40° 50° 60° 70° 80° 90° 100 Forward current IF (mA) 40 30 20 10 0 0 20 40 60 80 100 Peak emission wavelength λP (nm) Relative luminous intensity (%) Ambient temperature Ta (°C) Publication date: November 2008 SHD00368BEK 1 This product complies with the RoHS Directive (EU 2002/95/EC). LN21RPX  ackage (Unit: mm) P LLXLTN2SK010 φ 5.0 ± 0.2 2.0 Max. NOT SOLDERED 2 − 0.45 ± 0.1 27.0 ± 1.0 1.0 2 − 0.7 Max 2.3 8.65 ± 0.2 1.0 0.45 ± 0.1 1 2 2.5  in name P 1: Anode 2: Cathode 2 SHD00368BEK φ 6.0 ± 0.2 1. 5 2.54 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: – Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. – Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20080805