MAZ4062

Zener Diodes MAZ4xxx Series (MA4xxx Series) Silicon planar type Unit: mm For stabilization of power supply ■ Features • High reliability, achieved by the DHD structure • Allowing to insert to a 5 mm pitch hole • Finely divided zener-voltage rank • Sharp rising performance • Wide voltage range: Zener voltage VZ = 2.0 V to 39.0 V 2.5±0.1 φ 0.40±00.5 13 min. Colored band indicatesVz classification 2.7±0.15 13 min. φ1.55±0.2 Anode Cathode 1st Band 2nd Band 3rd Band ■ Absolute Maximum Ratings Ta = 25°C Parameter Forward current (Average) Repetitive peak forward current Power dissipation *1 Non-repetitive reverse surge *2 power dissipation Junction temperature Storage temperature Symbol IF(AV) IFRM PD PZSM Tj Tstg Rating 250 250 370 30 200 −65 to +200 Unit mA mA mW W °C °C DO-34-A2 Package Note) *1: PD = 370 mW achieved with a printed circuit board *2: t = 100 µs, Tj = 150°C ■ Common Electrical Characteristics Ta = 25°C ± 3°C *1 Parameter Forward voltage Zener voltage *2 Zener rise operating resistance Zener operating resistance Reverse current Temperature coefficient of zener voltage *3 Terminal capacitance Symbol VF VZ RZK RZ IR1 IR2 SZ Ct Conditions IF = 10 mA IZ IZ IZ VR VR IZ Specified value Specified value Specified value Specified value Specified value Specified value Refer to the list of the electrical characteristics within part numbers Min Typ 0.8 Max 0.9 Unit V V Ω Ω µA mV/°C pF VR = 0 V, f = 1 MHz Specified value Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Absolute frequency of input and output is 50 MHz. 3. *1: The temperature must be controlled 25°C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25°C) 2: VZ guaranteed 20 ms after current flow. * *3: Tj = 25°C to 150°C Note) The part number in the parenthesis shows conventional part number. Publication date: March 2004 SKE00004DED 1 MAZ4xxx Series ■ Electrical Characteristics within Part Numbers Ta = 25°C ± 3°C • VZ = 2.0 V to 6.8 V (IZ = 5 mA) Zener voltage Part number VZ (V) IZ = 5 mA Max Min 1.88 2.24 2.08 2.45 2.28 2.70 2.50 2.90 2.80 3.20 3.10 3.50 3.40 3.80 3.70 4.00 4.40 4.80 5.30 5.80 6.40 7.00 7.70 8.50 9.40 10.40 11.40 12.40 13.65 13.90 15.30 16.90 18.80 20.80 22.80 4.10 4.60 5.00 5.40 6.00 6.60 7.20 7.90 8.70 9.60 10.60 11.60 12.70 14.10 14.35 15.60 17.10 19.10 21.20 23.30 25.60 Terminal capacitance Ct (pF) IR1 (µA) IR2 (µA) RZ (Ω) RZK (Ω) SZ (mV/°C) 0 V) VR VR IZ = 5 mA IZ IZ = 5 mA (VR1=MHz f= (V) Max (V) Max Max (mA) Max Min Typ Max Typ Max Reverse current Zener Zener rise Temperature operating operating coefficient of resistance resistance zener voltage ( Marking symbol Color indication Main body: Light green ) MAZ4020 MAZ4022 MAZ4024 MAZ4027 MAZ4030 MAZ4033 MAZ4036 MAZ4039 MAZ4043 MAZ4047 MAZ4051 MAZ4056 MAZ4062 MAZ4068 MAZ4075 MAZ4082 MAZ4091 MAZ4100 MAZ4110 MAZ4120 MAZ4130 MAZ4140 MAZ4150 MAZ4160 MAZ4180 MAZ4200 MAZ4220 MAZ4240 0.5 0.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 4.0 4.0 5 5 6 7 7 8 9 9 10 11 13 14 15 17 120 120 120 100 50 20 10 10 10 3 2 1 3 2 1 0.5 0.2 0.2 0.1 0.1 0.1 0.1 0.05 0.05 0.05 0.05 0.05 0.05             5.3 5.9 6.5 7.2 8.0 8.9 9.9 10.9 11.9 13.1 13.4 14.8 16.4 18.3 20.3 22.3             60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 100 100 100 100 100 100 100 100 100 80 60 40 20 15 15 15 15 20 20 25 30 30 30 40 45 55 55 70 1 1 1 1 1 1 1 2000 2000 2000 1000 1000 1000 1000 −3.5 −1.5 −3.5 −1.5 −3.5 −1.6 −3.5 −2.0 −3.5 −2.1 −3.5 −2.4 −3.5 −2.4 0 0 0 0 0 0 0 375 375 375 350 350 325 300 300 275 130 110 95 90 85 80 75 70 70 65 65 60 60 55 52 47 36 34 33 1st. 2nd. 3rd. 450 Red Black Black 450 Red Red Red 450 Red Yellow Yellow 450 Red Purple Purple 450 Orange Black Black 450 Orange Orange Orange 450 Orange Blue Blue Orange White White Yellow Orange Orange Yellow Purple Purple Green Brown Brown Green Blue Blue Blue Red Red Blue Gray Gray Purple Green Green Gray Red Red White Brown Brown Brown Black  Brown Brown  Brown Red  Brown Orange  Brown Yellow  Brown Green  Brown Blue  Brown Gray  Red Black  Red Red  Red Yellow  1 1000 1 1000 1 900 1 800 1 500 0.5 300 0.5 140 0.5 120 0.5 120 0.5 130 0.5 130 0.5 170 0.5 170 0.5 170 0.5 170 0.5 170 0.5 170 0.5 170 0.5 180 0.5 180 0.5 180 −3.5 −2.5 0 −3.5 −2.5 0 −3.5 −1.4 0.2 −2.7 −0.8 1.2 −2.0 1.2 2.5 0.4 2.3 3.7 1.2 3.0 4.5 2.5 4.0 5.3 3.2 4.6 6.2 3.8 5.5 7.0 4.5 6.4 8.0 5.4 7.4 9.0 6.0 8.4 10.0 7.0 9.4 11.0 7.0 10.0 13.0 9.2 11.4 13.0 10.4 12.4 14.0 12.4 14.4 16.0 14.4 16.4 18.0 16.4 18.4 20.0 18.4 20.4 22.0 450 450 180 160 140 130 110 100 95 90 90 85 85 80 80 75 75 70 60 60 55 • VZ = 27.0 V to 39.0 V (IZ = 2 mA) Zener voltage Part number VZ (V) IZ = 2 mA Min Max 25.10 28.00 31.00 34.00 37.00 28.90 32.00 35.00 38.00 41.00 Terminal capacitance Ct (pF) IR1 (µA) IR2 (µA) RZ (Ω) RZK (Ω) SZ (mV/°C) 0 V) VR VR IZ = 2 mA IZ IZ = 2 mA (VR1=MHz f= (V) Max (V) Max Max (mA) Max Min Typ Max Typ Max Reverse current Zener Zener rise Temperature operating operating coefficient of resistance resistance zener voltage ( Marking symbol Color indication Main body: Light green ) MAZ4270 MAZ4300 MAZ4330 MAZ4360 MAZ4390 19 21 23 25 27 0.05 0.05 0.05 0.05 0.05 24.8 27.8 30.7 33.6 36.0 60 60 60 60 60 80 80 80 90 130 0.5 0.5 0.5 0.5 0.5 200 200 200 200 250 21.4 24.4 27.4 30.4 33.4 23.4 26.6 29.7 33.0 36.4 25.3 29.4 33.4 37.4 41.2 30 27 25 23 21 50 50 45 45 45 1st. 2nd. 3rd. Red Purple  Orange Black  Orange Orange  Orange Blue  Orange White  2 SKE00004DED MAZ4xxx Series PD  Ta Thickness of the printed-circuit board 1.6 mm Copper foil 0.035 mm, Hole distance 5 mm Anode side copper foil φ 3 mm Cathode side copper foil φ 3 mm PZSM  tW 320 I F  VF Ta = 25°C Power dissipation PD (mW) 400 Non-repetitive reverse surge power dissipation PZSM (W) 500 300 Ta = 25°C (Prior to surge) 10 150°C (Prior to surge) Forward current IF (mA) 10 102 240 160 200 80 100 0 0 50 100 150 200 250 1 10−1 1 0 0 0.2 0.4 0.6 0.8 1.0 1.2 Ambient temperature Ta (°C) Pulse width tW (ms) Forward voltage VF (V) IZ  V Z 160 Ta = 25°C Static Characteristics 120 I Z  VZ Ta = 25°C Static Characteristics 40 I Z  VZ Ta = 25°C Static Characteristics Zener current IZ (mA) MAZ4047 MAZ4051 MAZ4056 MAZ4062 MAZ4068 MAZ4075 MAZ4082 Zener current IZ (mA) 80 MAZ4091 40 MAZ4036 MAZ4039 MAZ4043 40 MAZ4100 MAZ4030 MAZ4033 10 20 0 0 1 2 3 4 5 6 0 0 0 2 4 6 8 10 12 0 10 20 Zener voltage VZ (V) Zener voltage VZ (V) Zener voltage VZ (V) IZ  V Z 200 Tj = 25°C Dynamic Characteristics 160 160 200 I Z  VZ 100 Tj = 25°C Dynamic Characteristics 80 MAZ4062 MAZ4082 MAZ4091 MAZ4100 I Z  VZ Tj = 25°C Dynamic Characteristics Zener current IZ (mA) Zener current IZ (mA) MAZ4027 120 MAZ4030 MAZ4033 80 MAZ4036 MAZ4039 40 MAZ4043 0 120 Zener current IZ (mA) MAZ4051 MAZ4056 MAZ4024 60 MAZ4110 MAZ4130 MAZ4160 MAZ4200 MAZ4240 MAZ4270 MAZ4300 MAZ4330 MAZ4360 80 MAZ4047 MAZ4068 MAZ4075 40 40 20 0 1 2 3 4 5 6 0 0 2 4 6 8 10 12 0 0 10 20 Zener voltage VZ (V) Zener voltage VZ (V) Zener voltage VZ (V) MAZ4240 MAZ4270 MAZ4300 MAZ4330 MAZ4360 30 40 30 40 80 60 20 MAZ4200 MAZ4024 MAZ4027 Zener current IZ (mA) 120 30 MAZ4110 MAZ4130 MAZ4160 100 SKE00004DED 3 MAZ4xxx Series Zth  tW Transient thermal impedance Zth (°C / mW) Heat sink Thickness t = 1.6 mm Copper foil t = 0.035 mm Anode side φ 3 mm Cathode side φ 3 mm Lead distance 5 mm 104 RZ  IZ 1 Zener operating resistance RZ (Ω) 103 102 MAZ4033 MAZ4024 MAZ4300 MAZ4047 MAZ4200 MAZ4120 MAZ4068 10−1 10 10−1 1 10 102 1 10−1 1 10 102 Pulse width tW (s) Zener current IZ (mA) SZ  I Z Temperature coefficient of zener voltage SZ (mV / °C) Tj = 25°C to 150°C MAZ4043 MAZ4039 −1 SZ  IZ Temperature coefficient of zener voltage SZ (mV / °C) 10 Tj = 25°C to 150°C 1 0 6 MAZ4091 MAZ4082 MAZ4075 MAZ4068 MAZ4036 MAZ4033 MAZ4030 2 MAZ4062 MAZ4056 MAZ4047 MAZ4051 −2 MAZ4024 MAZ4027 −3 0 20 40 60 80 100 120 −2 −6 0 4 8 12 16 20 24 Zener current IZ (mA) Zener current IZ (mA) 4 SKE00004DED Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP