MAZM120H

ESD Diodes MAZMxxxH Series Silicon planar type 1.60±0.05 Unit: mm 0.55±0.05 For surge absorption circuit 1.60±0.05 1.20±0.05 1.00±0.05 5 4 1.20±0.05 1.60±0.05 ■ Features • Four elements anode-common type • Power dissipation PD : 150 mW 1 2 3 5° 0.10±0.03 0.20±0.05 Power dissipation * PD Tj Tstg 150 150 −55 to +150 mW °C °C Junction temperature Storage temperature Note) *: PD = 150 mW achieved with a printed circuit board. 1 : Cathode 1 4 : Cathode 3 2 : Anode 1, 2, 3, 4 5 : Cathode 4 3 : Cathode 2 SSMini5-F1 Package Internally connected circuit 5 4 1 0 ∼ 0.01 Parameter Symbol Rating Unit 2 3 ■ Common Electrical Characteristics Ta = 25°C ± 3°C Parameter Zener voltage * Symbol VZ RZK RZ IR IZ IZ IZ VR Conditions Specified value Specified value Specified value Specified value Min Typ Max Unit V Ω Ω µA Zener rise operating resistance Zener operating resistance Reverse current Refer to the list of the electrical characteristics within part numbers Note) 1. Measuring methods are based JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Electrostatic breakdown voltage is ±10 kV Test method: IEC1000-4-2 (C = 150 pF, R = 330 Ω, Contact discharge: 10 times)   3. *: The temperature must be controlled 25°C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25°C) VZ guaranted 20 ms after current flow. (0.15) ■ Absolute Maximum Ratings Ta = 25°C 5° Publication date: November 2004 SKE00021AED 1 MAZMxxxH Series ■ Electrical characteristics within part numbers Ta = 25°C ± 3°C Zener voltage Part number Min MAZM062H MAZM068H MAZM082H MAZM100H MAZM120H 5.8 6.4 7.7 9.4 11.4 VZ (V) Nom 6.2 6.8 8.2 10.0 12.0 Max 6.6 7.2 8.7 10.6 12.7 IZ (mA) 5 5 5 5 5 Zener Zener rise Reverse current operating operating (DC) resistance resistance IR (µA) RZ (Ω) RZK (Ω) VR IZ = 5 mA IZ = 0.5 mA Max (V) Max Max 0.2 0.1 0.1 0.05 0.05 4 4 5 7 9 50 30 30 30 30 100 60 60 60 80 Marking symbol 6.2Z 6.8Z 8.2Z 10Z 12Z PD  Ta 250 10 mm 10 mm 0.8 mm Cu foil t = 0.035 mm 102 Ta = 25°C I Z  VZ 102 Ta = 25°C I F  VF Power dissipation PD (mW) 200 10 150 1 Forward current IF (mA) Zener current IZ (mA) 10 1 100 10−1 MAZM062H MAZM068H MAZM082H MAZM100H MAZM120H 10−1 50 10−2 0 0 50 100 150 200 250 10−3 10−2 4 6 8 10 12 14 0 0.4 0.8 1.2 Ambient temperature Ta (°C) Zener voltage VZ (V) Forward voltage VF (V) RZ  IZ Ta = 25°C MAZM062H MAZM120H 10 MAZM100H MAZM082H MAZM068H SZ  IZ Temperature coefficient of zener voltage SZ (mV / °C) 12 Ta = 25°C to 150°C MAZM120H Ct  VR 30 Ta = 25°C 102 Zener operating resistance RZ (Ω) 10 8 Terminal capacitance Ct (pF) MAZM100H 20 MAZM068H 6 MAZM082H 1 4 MAZM068H 10 MAZM062H MAZM082H MAZM100H MAZM120H 2 MAZM062H 10−1 1 10 102 0 0 10 20 30 40 50 60 0 0 4 8 12 Zener current IZ (mA) Zener current IZ (mA) Reverse voltage VR (V) 2 SKE00021AED Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP