MN103S927

MN103S927, MN103S92A Type Internal ROM Internal RAM Package Minimum Instruction Execution Time Interrupts Timer Counter MN103S927 16K-byte 2K-byte LQFP064-P-1414 *Lead-free 25 ns (at 3.0 V to 3.6 V, 10 MHz) *at internal 4 times oscillation used) • 8 external interrupts • 18 internal interrupts (watch dog timer, timer, serial I/F, PWM, A/D, system error) 8-bit timer × 4 Timer 0 to 3: Interval timer, Event counter, Cascading connectable 16-bit timer × 2 Timer 8: Interval timer, Event counter, PWM output (6 pins simultaneous output are available), Double buffer Timer 11: Interval timer, Double buffer, Start synchronized with 3-phase PWM are available Watch dog timer UART (full duplex) / synchronous interfaces selective × 1 Serial 2: 1-bit to 8-bit transmission (synchronous), 2 and 3 channel type selectable (synchronous) MN103S92A (under development) 32 K-byte Serial Interface I/O Pins I/O Input A/D Inputs 41 8 Exclusive × 11, selective × 30 Selective × 8 10-bit × 3 unit, 2 inputs × 1, 6 inputs × 1 Simultaneous conversion of 2 series are available, With S/H, Conversion start synchronized with 3-phase PWM or timer 11 are available 16-bit 3-phase PWM × 1 Minimum resolution: 50 ns Triangular waveform or jigsaw waveform dead time setup, Double buffer, Output polar switching is available, PWM output pin protect function Motor Control PWM Electrical Characteristics A/D converter characteristics Parameter Non-linear error A/D conversion time Analog input voltage tAD VIA Limit Symbol Condition min 10-bit 1.5 VSS VDD typ max ±3 LSB µs V Unit (Ta = 25° C, VDD = 3.0 V, VSS = 0 V) MAF00016BEM MN103S927, MN103S92A Pin Assignment P40 / TM8AIO P41 / TM8BIO P33 / TM3IO P32 / TM2IO P31 / TM1IO P30 / TM0IO 35 48 47 46 45 44 43 42 41 40 39 38 37 36 34 P45 P46 P47 VPP VDD P50 VSS P51 P52 / PWM00 P53 / NPWM00 P54 / PWM01 P55 / NPWM01 P56 / PWM02 P57 / NPWM02 P62 / PWM10 P63 / PWM11 33 P20 / SBT2 P21 / SBI2 VDD VSS P44 P43 P42 P36 P35 P34 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 P17 / SBO2 P13 / IRQ07 P12 / IRQ06 P11 / IRQ05 P10 / IRQ04 P07 / NRST VDD PVDD VSS OSCI OSCO TEST3 TEST2 TEST1 P87 / ADIN15 P86 / ADIN14 MN103S927 MN103S92A MN103SF92GBL 10 11 12 13 14 P83 / ADIN11 15 P84 / ADIN12 P64 / PWM12 P65 / PWM13 P66 / PWM14 P67 / PWM15 VSS P80 / ADIN00 P81 / ADIN01 P82 / ADIN10 VDD LQFP064-P-1414 *Lead-free Support Tool In-circuit Emulator On board Debugger Flash Memory Built-in Type PX-ICE-103S92 PX-ODB103-DO Type ROM RAM Minimum instruction execution time Package MN103SF92G 128K-byte 4K-byte 25 ns (at 3.0 V to 3.6 V, 10 MHz) LQFP064-P-1414A *Lead-free MAF00016BEM P85 / ADIN13 P74 / IRQ00 P75 / IRQ01 P76 / IRQ02 P77 / IRQ03 16 1 2 3 4 5 6 7 8 9 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP