MN82832

DATA SHEET Part No. Package Code No. MN82832 LQFP176-P-2424B SEMICONDUCTOR COMPANY MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. Publication date: December 2004 SDB00105AEM 1 MN82832 MN82832 3-Dimension Y/C Separation LSI Unit: mm Overview MN82832 is a system LSI which incorporates processing necessary for high-quality televisions in a one chipconfiguration. High-efficiency 3-dimensions Y/C separation and color demodulation corresponding to an NTSC/PAL system, plus various functions of the digital YUV output are built in. It is most suitable as a television use LSI providing high-quality processing and multi-processing. 132 133 89 88 (1.25) 26.00±0.20 24.00±0.10 176 1 (1.25) 0.50 45 44 0.20±0.05 0.10 M 1.40±0.10 1.70 max 24.00±0.10 26.00±0.20 (1.00) 0.15±0.05 Features • Input (A/D input Y: 10-bit, C/U/V: 8-bit) 0.08 SEATING PLANE Composite video signal YC signal YUV signal LQFP176-P-2424B • Analog Output (D/A output Y: 10-bit , C/U/V: 8-bit) YC signal YUV signal • Digital Output (Y: 10-bit, C/U/V: 8-bit) YC signal YUV signal (4 : 2 : 2 rate or 4 : 2 : 0 rate) • Main functions 3 dimension Y/C separation with full 10-bit operation (16M-bit or 64M-bit SDRAM) (Non-standard: 3 frame average type YNR , 5 dB improvement of S/N ratio) Clamp control(Clamp current source included) Color demodulation (NTSC/PAL-BGHI, M, N) Sync separation ID -1 detection DD conversion (burst lock clock ⇒ line lock clock) Horizontal/vertical aperture correction 10-bit A/D converter (1-ch.) 8-bit A/D converter (1-ch.) 10-bit D/A converter (1-ch.) 8-bit D/A converter (2-ch.) IIC bus control 0.10±0.10 0˚ to 8˚ 0.50±0.20 Specifications Clock frequency 4 fsc (first half processing part) 4 (8) fsc or 13.5 (27) MHz (latter half processing part) 16 fsc (SDRAM-I/F part) Supply voltage 3.3 V ± 0.165 V Package 176-pin LQFP ( 24mm, 0.5mm pitch) Applications CRT Televisions, LCD Televisions, PDP Televisions, TV Capture Cards, Monitors with Built-in TV Tuner SDB00105AEM 2 MN82832 ■ Block Diagram MN82832 10-bit D/A 8-bit D/A 8-bit D/A H,V Aperture Correction Analog Output Composite/ Y-input S-mode (C-input) YUV U-input YUV V-input 10-bit A/D Sync Separation Std/Non-std Detection YOUT C/UOUT VOUT Mix 8-bit A/D 2DYC Separation Digital Output 16M-bit SDRAM Memory Control 3DYC Separation YNR DD Convert 3D processing of NTSC 2D processing of PAL ID-1 Det. Motion Detection YOUT UVOUT HOUT VOUT CLKOUT UVID X’ Tal 27 MHz Clock Gen. Color Demodulation IIC Bus I/F SDA SCL ■ Application System of MN82832 (Middle Class with PIP) SP 16M-bit 16M-bit SDRAM SDRAM Sound Sound AN5891 AN5891 AN5265 AN5265 AN5275 AN5275 Audio Out Audio Out New Tuner New Tuner with with VIF & SIF VIF & SIF AV AV Switch Switch New 3D New 3D YC Sep. YC Sep. MN82832 MN82832 1chip Signal 1chip Signal Processor Processor for for Analog TV Analog TV Comb Filter Comb Filter VCJ VCJ Caption, OSD Caption, OSD Tuner Micro Tuner Micro MN101E11G AN15931 AN15931 RGB AMP RGB AMP 2SC3941 2SC3941 2SC2258 2SC2258 Video Out Video Out VM Drive VM Drive 2SD1729 2SD1729 H-Out H-Out AN5522 AN5522 AN5523 AN5523 Ver. Drive Ver. Drive CRT PIP PIP MN101E11G (NTSC) (NTSC) MN101E04G MN101E04G (Multi) (Multi) MN101E02H MN101E02H (Multi+teletext) (Multi+teletext) PNA460X IRPNA460X Receiver IR Receiver SDB00105AEM Parabola out 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP