PNZ330CL

PIN Photodiodes PNZ330CL (PN330CL) Silicon planar type φ5.35 -0.1 +0.2 Unit: mm For optical control systems ■ Features • TO-18 standard type package • High coupling capabillity suitable for plastic fiber • High quantum efficiency • High-speed response 3.0±0.3 φ4.2 -0.2 +0.1 12.7 min. 0.2±0.05 2.0±0.1 2-φ0.45±0.05 01. 5 .1 +0 0.1 ■ Absolute Maximum Ratings Parameter Reverse voltage Power dissipation Operating ambient temperature Storage temperature Ta = 25 ° C Symbol VR PD Topr Tstg Rating 30 100 −25 to +85 −30 to +100 Unit V mW °C °C 1. 0± 0. 15 ± 45° 3° 2 1 1: Anode 2: Cathode MTRLR102-001 Package 2.54±0.2 ■ Electrical-Optical Characteristics Ta = 25°C ± 3°C Parameter Dark current Photocurrent *1 Peak emission wavelength Rise time *2 Fall time *2 Symbol ID IL λp tr tf Ct θ V R = 10 V Conditions VR = 10 V, L = 1 000 lx V R = 10 V VR = 10 V, RL = 50 Ω VR = 0 V, f = 1 MHz The angle from which photocurrent becomes 50% Min Typ 0.1 Max 10.0 Unit nA µA nm ns ns pF ° 7 10 850 2 2 7 70 Terminal capacitance Half-power angle Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Spectral sensitivity characteristics: Sensitivity for wave length over 400 nm maximum sensitivity ratio is 100%. 3. This device is designed be disregarded radiation. 4. *1: Source: Tungsten (color temperature 2 856 K) *2: Switching time measurement circuit Sig. in VR (Input pulse) Sig. out 50 Ω RL (Output pulse) tr tf 90% 10% tr: Rise time tf: Fall time Note) The part number in the parenthesis shows conventional part number. Publication date: April 2004 SHE00039BED 1 PNZ330CL IL  L 103 VR = 10 V Ta = 25°C 16 Ta = 25°C IL  V R 16 VR = 10 V L = 1 000 lx IL  Ta 102 12 12 L = 1 000 lx Photocurrent IL (µA) Photocurrent IL (µA) 10 8 L = 500 lx 4 Photocurrent IL (µA) 8 1 4 10−1 10−2 1 10 102 103 104 0 0 10 20 30 40 50 0 −60 −20 20 60 100 Illuminance L (lx) Reverse voltage VR (V) Ambient temperature Ta (°C) ID  T a 102 VR = 10 V 103 tr , tf  RL Spectral sensitivity characteristics 100 VR = 10 V Ta = 25°C Rise time tr , Fall time tf (ns) 10 80 102 1 Relative sensitivity ∆S (%) 10−1 1 10 Dark current ID (nA) 60 10 10−1 40 10−2 1 20 10−3 −40 0 40 80 10−1 −2 10 0 200 400 600 800 1 000 1 200 Ambient temperature Ta (°C) Load resistance RL (kΩ) Wavelength λ (nm) Directivity characteristics 0° 10° 20° 30° 40° 50° Coupling loss characteristics 0 X, Y = 0 mm 1 1 0 Coupling loss characteristics Z = 0 mm 100 80 60 40 20 Relative sensitivity ∆S (%) 70° 80° 90° Coupling loss LZ (dB) 60° Coupling loss LX , LY (dB) Z = 0.3 mm 2 2 3 Y 4 X 5 Fiber Z φ1 mm 3 Y 4 X 5 − 0.8 Fiber Z φ1 mm 0 0.4 0.8 1.2 1.6 − 0.4 0 0.4 0.8 Distance Z (mm) Distance X, Y (mm) 2 SHE00039BED Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP