UP-RW1245P1

Individual Data Sheets UP-RW1245P1 For standby power supplies. Trickle Design life: 6 – 9 years at 20 °C. Dimensions (mm) Terminal Type: Faston 250 with hole 151 + 1.5 - 0.5 7.5 65.15 64.5 + 1.5 - 0.5 48 150.2 0.3 94 + 1.5 - 0.5 63.7 Battery case resin: Standard (UL94HB) Specifications Nominal voltage Nominal capacity (10 minute rate) Length Dimensions Width Height Total Height Approx. mass 12 V 45 W/2 V 151.0 mm 64.5 mm 94.0 mm 101.5 mm 2.6 kg Discharge characteristics (20 °C) 14.4 13.8 13.2 12.6 12.0 11.4 10.8 10.2 9.6 9.0 8.4 7.8 0 1 2 4 (Note) Terminal voltage(V) 2.25 A 9.0 A 27.0 A 6 8 10 20 40 60 80 100 200 Characteristics Capacity (note) (20 °C) (9.6 V cutoff) Internal resistance 30 minute rate 15 minute rate 10 minute rate 5 minute rate Fully charged battery (20 °C) 40 °C 20 °C 0 °C -15 °C Residual capacity after standing 3 months Residual capacity after standing 6 months Residual capacity after standing 12 months 108 W 185 W 254 W 389 W Approx. 21 mΩ 102 % 100 % 85 % 65 % 91 % 83 % 66 % Duration of dischar g e (minute) Duration of discharge vs. Discharge current 1,500 1,200 1,000 (Note) Temperature dependency of capacity (10 hour rate) 500 40˚C 20˚C Duration of discharge (Minute) 300 Self discharge (20 °C) 100 Watt table Cutoff 9.6 V 10.2 V 10.8 V 50 30 Discharge Runtime at 20 °C (unit: watt) 3 min. 503 465 412 5 min. 389 370 313 7 min. 313 299 260 10 min. 254 245 222 15 min. 185 183 171 20 min. 154 151 141 30 min. 108 107 105 0˚C -15˚C 10 5 3 0.2 0.5 1 3 5 10 30 50 100 (Note) The above characteristics data are average values obtained within three charge/discharge cycles, not the minimum values. (Note) This battery is designed for high-rate discharge, therefore we do not specify 20-hour-rate discharge capacity. (Note) When specific conditions are satisfied, this battery can be used for main power supplies. Please consult Panasonic. Discharge Current (A) Valve Regulated Lead-Acid Batteries 40