ACC19-AV-M300

High Bond Adhesive Backed Cord Clips S P E C I F I C AT I O N S H E E T specifications Metal High Bond Adhesive Backed Cord Clips High bond adhesive backed cord clips (metal or heat stabilized weather resistant nylon 6.6) shall utilize multi-purpose acrylic adhesive on both sides of conformable foam. The adhesive shall provide excellent adhesion to a broad range of high and medium surface energy substrates including metals, glass, and a wide variety of plastics. The conformable foam shall provide good contact, even with mismatched substrates.* 0.25" (6.4mm) max. bundle diameter: MACC25-AV-D 0.62" (15.7mm) max. bundle diameter: MACC62-AV-C Heat Stabilized Weather Resistant Nylon 6.6 High Bond Adhesive Backed Cord Clips 0.19" (4.8mm) max. bundle diameter: ACC19-AV-M300 technical information Material: MACC: Hot-Dipped Galvanized Steel with High Bond Adhesive ACC: Heat Stabilized Weather Resistant Nylon 6.6 with High Bond Adhesive Temperature range: -31°F (-35°C) to 200°F (93°C) continuous Solvent and fuel resistance: Water, salt water, hydraulic fluid, 10W30 motor oil, glycol antifreeze – 100% adhesive retention; kerosene – 90% adhesive retention, isopropyl alcohol, jet fuel – 50% adhesive retention, gasoline – 35% adhesive retention Environmental compliance: RoHS compliant Application environment: MACC: indoor only ACC: indoor/outdoor key features and benefits High bond adhesive Provides maximum adhesion, especially in harsh, high temperature, and outdoor environments; extending service life Smooth surfaces and rounded edges Protect the cable bundle and the installer; improving productivity, job site safety, and reliability Flexible, lightweight material Easily handled; improving productivity One-piece design Eliminates the need for screws, rivets, and nut-and-bolt assemblies, installs by hand with low insertion force; lowering installed cost, improving productivity, and minimizing fatigue applications Panduit high bond adhesive backed cord clips are a reliable and cost-effective solution for securing wires and cables in demanding applications, such as harsh environments. These clips can be utilized in the alternative energy, mass-transit rail, control panel, marine, heavy equipment, white goods, and automotive industries. The conformable nature of the acrylic foam core allows for a strong bond to a variety of substrates. This tape has also demonstrated excellent performance when bonding to relatively irregular surfaces.* *Portions of this material were reproduced from the 3M VHB Conformable Acrylic Foam Tape 4936 and 4941 Product Data Sheets. w w w. pa n d u it.c o m 0.38" (9.6mm) max. bundle diameter: ACC38-AV-M300 0.62" (15.7mm) max. bundle diameter: ACC62-AV-D300 High Bond Adhesive Backed Cord Clips ordering information Metal High Bond Adhesive Backed Cord Clips Part Number Material Adhesive Type Hot-Dipped Galvanized Steel High Bond Acrylic VHB‡ Maximum Bundle Diameter In. MACC25-AV-D MACC62-AV-C mm Length In. Clip Width Width mm In. mm In. mm Std. Pkg. Qty. 0.25 6.4 0.77 19.6 0.54 13.7 0.29 7.4 500 0.62 15.7 1.18 30.0 0.78 19.7 0.29 7.4 100 Heat Stabilized Weather Resistant Nylon 6.6 High Bond Adhesive Backed Cord Clips Part Number Material Adhesive Type Black Heat Stabilized Weather Resistant Nylon 6.6 High Bond Acrylic VHB‡ Maximum Bundle Diameter mm Std. Pkg. Qty. 0.19 4.8 0.76 19.3 0.63 16.0 0.25 6.5 1000 0.38 9.6 1.00 25.4 1.00 25.4 0.40 10.2 1000 0.62 15.7 1.24 31.4 1.12 28.5 0.65 16.5 500 In. ACC19-AV-M300 ACC38-AV-M300 ACC62-AV-D300 mm Length In. mm Height Width In. mm In. applications techniques* 1. Bond strength is dependent upon the amount of adhesive to surface contact developed. Firm application pressure develops better adhesive contact and thus improves bond strength. 2. To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. A typical surface cleaning solvent is isopropyl alcohol and water. Use proper safety precautions for handling solvents. 3. Ideal tape application temperature range is 21°C to 38°C (70°F to 100°F). Initial tape application to surfaces at temperatures below 15°C is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. NOTE: Some paint systems and plastics contain additives which can influence adhesion. Adhesion to these surfaces should be evaluated carefully; the effects of these additives can often be overcome by proper cleaning and surface preparation. High humidity/high temperature environments can also affect adhesion to glass due to the hydrophilicity of glass. Under these environments a silane coupling agent (adhesion promoter) has been found to enhance the durability and strength of the bond. ‡VHB is a trademark of 3M. *This information was reproduced from the 3M VHB Conformable Acrylic Foam Tape 4936 Product Data Sheet. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2014 Panduit Corp. ALL RIGHTS RESERVED. WASP33--WW-ENG Replaces WW-WASP13 4/2014