AFR4JB2SIW

Pan-Way® Above Floor Raceway System SPECIFICATION SHEET specifications Above Floor Raceway non-metallic multi-channel surface raceway shall be used to route, protect, and conceal data, voice, video, fiber optic and power cabling. The raceway shall be listed as suitable for use in applications up to 600 volts between conductors by Underwriters Laboratories, Inc. per standard 5A, and by Canadian Standards Association, Inc. per 22.2 no. 62.1-03, when screw secured and installed per instructions. A full line of fittings is available as well as a junction box to install a variety of communication and electrical devices. Four channel design separates cable types. Standard “screw-on” faceplates for data and power terminations shall be available. Above floor raceway will be manufactured from impact-resistant material with flammability rating of V-0 and must be tamper resistant yet, also allow access for moves, adds and changes. Above Floor Raceway finish shall be pure color, resist scratches and dents, will not peel or corrode and be available in three standard colors. Above Floor Raceway shall be optimized for use with the Panduit® Pan-Net and Net-Key Communication Systems. technical information Material: Rigid PVC Flammability: UL94V-0 FT4 Voltage rating: UL-5A 600VAC CSA C22.2 No. 62.1-03 600V Approvals: UL Listed 95425 (raceway) UL Listed E116129 (fittings) NEC: Article 388 key features and benefits ADA Compliant Meets 2010 American Disability Association standards by design 1” bend radius control fittings Cables in the raceway will satisfy the minimum 1” bend radius requirement, Preventing the potential degradation of cable performance; meets TIA/EIA Standard and many warranty requirements Tamper resistant Difficult for untrained personnel to enter the raceway or remove faceplates; provides security for communication cabling and safety for power cabling Designer profile Aesthetically pleasing and matches a wide variety of decors with three standard color options available: IW (International White), BL (Black) or OS (Office Slate) Non-metallic construction Lightweight raceway reduces installer fatigue; solid color throughout profile will not chip peel, rust, corrode, or scratch; easy to cut reducing the need for special cutting devices; easy to snap together base and cover; high impact resistance; durable applications Pan-Way® Above Floor Surface Raceway is a multi-channel raceway which provides solutions for routing low voltage, fiber optic and/or power cabling over floors. Above Floor raceway can mount NEMA standard screw-on faceplates directly to the junction box and can transition to Panduit's T-70 raceway for cable routing along walls. w w w . pa n d u it.c o m Above Floor Raceway* – 6 Foot Base and Cover 6 Foot: AFR4BCIW6 Above Floor Raceway Fittings Fittings Coupler Fitting: Transition to T70 Fitting: Right Angle Fitting: End Cap Fitting: Junction Box: AFR4CCIW AFR4TRT70IW AFR4RAIW AFR4ECIW AFR4JB2SIW Faceplates and Accessories Rectangular GFCI Outlet Faceplate: CPGIW-2G GFCI Adapter: CFG4IW GFCI Netkey Adapter: NK4RMFIW 106 Style Outlet Faceplate: CP106IW-2G 106 Netkey Adapter: NK4106MFIW 106 Adapter: Rectangular Outlet: 106 Style Outlet: CF1064IWY ERU20IW CDU20IW * Product listed in International White (IW). For other colors, replace IW with BL (Black) or OS (Office Slate). Pan-Way Above Floor Raceway ® Wire Fill Chart Raceway type and Fill Area configuration (in˄ 2) AFR4 - Outer Channel 0.337053 (with screws) AFR4 - Inner Channel 0.383826028 electrical cables Data Grade Cables Coax Cables Fiber Optic 14 12 10 24 AWG 24 AWG 24 AWG 24 AWG 24 AWG 24 AWG 24 AWG THN/THWN/T90 Cat 5eP Cat 5eR Cat 6 Cat 6A Cat 6A Cat 6A Cat 6A (SD) RG6 RG59/u 2-Strand 0.111 0.13 0.164 0.193 0.225 0.24 0.289 0.3 0.33 0.24 0.275 0.242 0.175 Fill Fill Fill Fill Fill Fill Fill Fill Fill Fill Fill Max Max Max Spec Max Spec Max Spec Max Spec Max Spec Max Spec Max Spec Max Spec Max Spec Max Spec Max UL Temp Rise Test 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 21 15 10 5 7 3 5 3 4 2 3 2 3 2 2 3 4 2 3 3 4 6 8 24 17 11 5 8 4 6 3 5 2 4 2 3 2 3 3 5 3 4 3 5 6 10 Dimensions AFR48BC6 0.50 [12.7] 6.93 [176.1] 72.00 [1828.8] AFR4CC 7.32 [186.0] 1.00 [25.4] 0.58 [14.7] AFR4EC 7.25 [184.1] 1.70 [43.3] 0.58 [14.7] Pan-Way Above Floor Raceway ® Dimensions AFR4JB2S AFR4RA 8.03 [203.9] 6.50 [165.1] 8.03 [203.9] Cover 4.94 [125.5] 2.64 [67.0] 0.46 [11.6] 7.46 7.19 [182.5] [189.4] 0.07 [1.8] Base 0.32 [8.0] 0.50 [12.7] Right Angle Base 6.54 [166.2] AFR4TRT70 Right Angle Cover Divider 5.84 [148.3] 5.30 [134.6] 0.58 [14.7] 0.20 [5.2] 2.74 [69.7] 6.94 [176.1] 7.13 [181.6] 4.40 [111.7] 3.49 [88.6] 3.50 [88.9] 0.21 [5.2] 3.50 [88.9] 3.00 [76.2] 2.85 [72.5] Raceway alignment tabs Cover 2.49 [63.3] Locking tab 0.12 [3.0] Base 5.02 [127.4] Dimensions are in inches. [Dimensions in brackets are metric.] WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2018 Panduit Corp. ALL RIGHTS RESERVED. SRSP32--WW-ENG 3/2018