Harness Board Accessories – Complementary Products from Panduit
Fully Automatic Cable Tie Installation Systems
A complete single-source solution for high volume harnessing, assembly, fastening, and packaging applications. With cycle times
of less than one second, the systems are up to six times faster than conventional manual cable tie installations.
Harness Board Accessories
Bundling Systems
Bundling and Mounting System
PAT/Robot Integration Kit
Abrasion Protection Products
Panduit Abrasion protection products provide an economical and easy way to insulate, protect, bundle, and color-code
components and cable. A wide variety of sizes and materials are available to meet a broad range of indoor and
outdoor applications.
Panduit harness board accessories allow an installer to
quickly configure a specific arrangement of wires, to aid in
required wire bundling and termination. Panduit’s
comprehensive line of harness board accessories can
significantly reduce the labor input required for field installation of
wires and cables and simplify harness board operations. These
products hold wire bundles at a uniform height from a harness
board to ease manual or automatic cable tie installation. These
accessories help maintain end product consistency, reduce costly
rework and maximize workplace safety.
Key Features
Pan-Wrap™ Split Harness Wrap
Corrugated Loom Tubing
Braided Expandable Sleeving
Spiral Wrap
Large selection of
board-mounted accessories
Comprehensive and versatile offering ensures there is a product to fit virtually
every harness board application
A wide range of sizes
Panduit harness board accessories can be used to manage wire
configurations up to 2 inches bundle diameter for maximum flexibility
Uniform standoff height
Accessories space the wire bundle at a uniform distance and height from the
harness board to allow simple cable tie application using manual or automatic
tooling to speed installation
Mounts designed to work with
harness board accessories
Panduit mounts can be integrated into the wiring harness at the harness
board to simplify deploying the harness onto the finished assembly to
speed installation
Snap-in, snap-out functionality
Harness board accessories hold the wires in a tight bundle, yet allow
completed harness to be easily removed by lifting upward on the harness
Spring wire breakout and wire
end holders
Individual wires are held in the bundle to maintain harness structure while
allowing consistent termination of wires
Te r m i n a l s , D i s c o n n e c t s , F e r r u l e s a n d S p l i c e s
Connectors are available loose piece for manual installation and continuously molded for high volume automated installation.
Panduit’s manual and automated installation tooling improve productivity and reliability for industrial settings.
Wide Variety of Terminals,
Disconnects, and Splices
4-Ton Press and
Universal Applicator
Benefits
Reel Smart ™ Continuously
Molded Connectors
Dimensions are in inches (Dimensions in parentheses are metric)
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Jalisco, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800-777-3300 and reference WACB20
©2010 Panduit Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
Product Bulletin Number SA-WACB20
Replaces SA101N556-WA
8/2010
w w w. p a n d u i t . c o m
Harness Board Accessories – Wire Routing
Harness Board Accessories – Wire Retainers
Corner Posts
Elastic Retainers
• Cable bundles are formed as individual wires are inserted
• Completed bundles can be easily removed
A
• Top arm rotates upward for easy removal of completed harness
Replacement Elastic
C
RER.5E-X
RER.75E-X
RER1.25E-X
RER2.0E-X
RER.50 – 1.25
Width
B
In.
mm
0.84 21.3
1.12 28.4
1.64 41.7
2.81 71.4
10
10
10
10
RER2.0
B
Length
A
In.
mm
1.18 30.0
1.18 30.0
1.18 30.0
1.31 33.3
.172 (4.4) Dia. Hole
For economy, the
elastic band can
be replaced in the
RER Elastic
Retainers without
removing the
RER base.
Pkg.
Qty.
Part
Number
Max. Bundle
Diameter
Part Number
In.
mm
RER.5-S6-X
0.50 12.7
RER.75-S6-X 0.75 19.0
RER1.25-S6-X 1.25 31.8
RER2.0-S6-X 2.00 50.8
• Designed to pre-form tight bundles at harness corners
and breakouts
• The elastic band is replaceable
Height
C
In.
mm
1.89 48.0
2.21 56.1
2.86 72.6
3.94 100.2
1.88
(47.8)
.172 (4.4) Dia. Hole
1.35
(34.4) .90
(22.9)
1.08
(27.4)
1.18
(30.0)
.88
.56 (22.4)
(14.2)
1.11
(28.2)
1.60
(40.8)
1.52
(38.6)
CPH
Material
Color
Nylon 6.6
Black Base,
White Arm
Mounting
Method
Two #6 (M3)
Screws
Natural
Std.
Pkg.
Qty.
10
10
10
10
Std.
Ctn.
Qty.
50
50
50
50
Part Number
CPH.75-S8-X
CPL.75-S8-X
CPL
Max. Bundle
Diameter
In.
mm
.75
Material
Color
Mounting Method
Std.
Pkg.
Qty.
Nylon
6.6
Black
Two #8 (M4) Screws
10
19.0
Std.
Ctn.
Qty.
100
T- J u n c t i o n F i x t u r e
Elastic Retainers – Low Profile
• Forms cable junctions
• Cable bundles are formed as cable bundles are inserted
• Fixture moves down for easy harness removal
• Completed bundles can be easily removed
C
.75 (19.0)
.12 (3.0)
B
1.12
(28.4)
(Dia)
1.39
(35.1)
A
.70 (17.8)
Part Number
ER.5-E4-X
ER1.25-E4-X
Max. Bundle
Diameter
In.
mm
.50
12.7
1.25
31.8
Length
A
In.
mm
1.96
49.8
2.90
73.7
Width
B
In.
mm
.56
14.2
.95
24.1
Height
C
In.
mm
1.00
25.4
2.00
50.8
Material
Color
Nylon 6.6
Black
Mounting
Method
Two #6 (M3)
Screws
Std.
Pkg.
Qty.
10
10
Std.
Ctn.
Qty.
100
100
Part Number
TJF-X
Max. Bundle
Diameter
In.
mm
1.34
34.0
Material
Nylon 6.6 and Nickel
Plated Steel
Bundle Retainers
Std.
Pkg.
Qty.
10
Std.
Ctn.
Qty.
100
Harness Board Nails
• Funnel entry allows fast cable insertion
• Completed bundles can be easily removed
• Color: Black
• Speed routing of wires
• Uniform driving depth is insured by a collar stop
A
.44
(11.2)
Part Number
BR.5-E6-C
BR.75-E6-C
BR2-1.3-X
BR2-1.3-A-X
BR2-1.5-X
BR2-4-X
BR2-6-X
2.18
(55.4)
A
2.56
(65.0)
BR.5 and BR.75
Max. Bundle
Diameter
In.
mm
0.50
12.7
0.75
19.0
2.00
50.8
2.00
50.8
2.00
50.8
2.00
50.8
2.00
50.8
• Smooth finish on nails prevents abrasion to wire jackets
B
.78
(19.8)
2
Color
Black
Mounting
Method
Nail
BR2
Standoff
Height
A
In.
mm
1.07
27.2
0.95
24.1
1.32
33.5
1.35
34.3
1.59
40.4
4.06 103.1
6.02 152.9
2.25
(57.2)
C
A
BR2-1.3
2.50
(63.5)
Std.
Pkg.
Material
Qty.
100
Impact Resistant
Two #6 (M3) Screws
Nylon 6.6
100
Two 1/4" (M6) Screws
10
Rubber Adhesive Tape 10
10
Glass Filled Nylon 6.6
10
Two 1/4" (M6) Screws
10
Mounting
Method
Std.
Ctn.
Qty.
500
500
10
10
10
10
10
A
Part Number
HBN.75-T
Length
A
In.
mm
.75
19.1
Overall Length
B
In.
mm
1.40 35.56
Thickness
C
In.
mm
.07
1.9
HBN1-T
1.00
25.4
1.65
41.91
.07
1.9
200
1000
HBN1.5-T
1.50
38.1
2.16
54.86
.08
2.1
200
1000
HBN2-T
2.00
50.8
2.66
67.56
.09
2.4
200
1000
HBN2.5-T
2.50
63.5
3.16
80.26
.11
2.8
HBN3-T
3.00
76.2
3.67
93.22
.12
HBN4-T
4.00
101.6
4.67
118.62
.14
Material
Nickel Plated
Steel
Mounting
Method
Hammered into
harness board
Std. Std.
Pkg. Ctn.
Qty. Qty.
200 1000
200
1000
3.0
200
1000
3.7
200
1000
3
Harness Board Accessories – Wire Routing
Harness Board Accessories – Wire Retainers
Corner Posts
Elastic Retainers
• Cable bundles are formed as individual wires are inserted
• Completed bundles can be easily removed
A
• Top arm rotates upward for easy removal of completed harness
Replacement Elastic
C
RER.5E-X
RER.75E-X
RER1.25E-X
RER2.0E-X
RER.50 – 1.25
Width
B
In.
mm
0.84 21.3
1.12 28.4
1.64 41.7
2.81 71.4
10
10
10
10
RER2.0
B
Length
A
In.
mm
1.18 30.0
1.18 30.0
1.18 30.0
1.31 33.3
.172 (4.4) Dia. Hole
For economy, the
elastic band can
be replaced in the
RER Elastic
Retainers without
removing the
RER base.
Pkg.
Qty.
Part
Number
Max. Bundle
Diameter
Part Number
In.
mm
RER.5-S6-X
0.50 12.7
RER.75-S6-X 0.75 19.0
RER1.25-S6-X 1.25 31.8
RER2.0-S6-X 2.00 50.8
• Designed to pre-form tight bundles at harness corners
and breakouts
• The elastic band is replaceable
Height
C
In.
mm
1.89 48.0
2.21 56.1
2.86 72.6
3.94 100.2
1.88
(47.8)
.172 (4.4) Dia. Hole
1.35
(34.4) .90
(22.9)
1.08
(27.4)
1.18
(30.0)
.88
.56 (22.4)
(14.2)
1.11
(28.2)
1.60
(40.8)
1.52
(38.6)
CPH
Material
Color
Nylon 6.6
Black Base,
White Arm
Mounting
Method
Two #6 (M3)
Screws
Natural
Std.
Pkg.
Qty.
10
10
10
10
Std.
Ctn.
Qty.
50
50
50
50
Part Number
CPH.75-S8-X
CPL.75-S8-X
CPL
Max. Bundle
Diameter
In.
mm
.75
Material
Color
Mounting Method
Std.
Pkg.
Qty.
Nylon
6.6
Black
Two #8 (M4) Screws
10
19.0
Std.
Ctn.
Qty.
100
T- J u n c t i o n F i x t u r e
Elastic Retainers – Low Profile
• Forms cable junctions
• Cable bundles are formed as cable bundles are inserted
• Fixture moves down for easy harness removal
• Completed bundles can be easily removed
C
.75 (19.0)
.12 (3.0)
B
1.12
(28.4)
(Dia)
1.39
(35.1)
A
.70 (17.8)
Part Number
ER.5-E4-X
ER1.25-E4-X
Max. Bundle
Diameter
In.
mm
.50
12.7
1.25
31.8
Length
A
In.
mm
1.96
49.8
2.90
73.7
Width
B
In.
mm
.56
14.2
.95
24.1
Height
C
In.
mm
1.00
25.4
2.00
50.8
Material
Color
Nylon 6.6
Black
Mounting
Method
Two #6 (M3)
Screws
Std.
Pkg.
Qty.
10
10
Std.
Ctn.
Qty.
100
100
Part Number
TJF-X
Max. Bundle
Diameter
In.
mm
1.34
34.0
Material
Nylon 6.6 and Nickel
Plated Steel
Bundle Retainers
Std.
Pkg.
Qty.
10
Std.
Ctn.
Qty.
100
Harness Board Nails
• Funnel entry allows fast cable insertion
• Completed bundles can be easily removed
• Color: Black
• Speed routing of wires
• Uniform driving depth is insured by a collar stop
A
.44
(11.2)
Part Number
BR.5-E6-C
BR.75-E6-C
BR2-1.3-X
BR2-1.3-A-X
BR2-1.5-X
BR2-4-X
BR2-6-X
2.18
(55.4)
A
2.56
(65.0)
BR.5 and BR.75
Max. Bundle
Diameter
In.
mm
0.50
12.7
0.75
19.0
2.00
50.8
2.00
50.8
2.00
50.8
2.00
50.8
2.00
50.8
• Smooth finish on nails prevents abrasion to wire jackets
B
.78
(19.8)
2
Color
Black
Mounting
Method
Nail
BR2
Standoff
Height
A
In.
mm
1.07
27.2
0.95
24.1
1.32
33.5
1.35
34.3
1.59
40.4
4.06 103.1
6.02 152.9
2.25
(57.2)
C
A
BR2-1.3
2.50
(63.5)
Std.
Pkg.
Material
Qty.
100
Impact Resistant
Two #6 (M3) Screws
Nylon 6.6
100
Two 1/4" (M6) Screws
10
Rubber Adhesive Tape 10
10
Glass Filled Nylon 6.6
10
Two 1/4" (M6) Screws
10
Mounting
Method
Std.
Ctn.
Qty.
500
500
10
10
10
10
10
A
Part Number
HBN.75-T
Length
A
In.
mm
.75
19.1
Overall Length
B
In.
mm
1.40 35.56
Thickness
C
In.
mm
.07
1.9
HBN1-T
1.00
25.4
1.65
41.91
.07
1.9
200
1000
HBN1.5-T
1.50
38.1
2.16
54.86
.08
2.1
200
1000
HBN2-T
2.00
50.8
2.66
67.56
.09
2.4
200
1000
HBN2.5-T
2.50
63.5
3.16
80.26
.11
2.8
HBN3-T
3.00
76.2
3.67
93.22
.12
HBN4-T
4.00
101.6
4.67
118.62
.14
Material
Nickel Plated
Steel
Mounting
Method
Hammered into
harness board
Std. Std.
Pkg. Ctn.
Qty. Qty.
200 1000
200
1000
3.0
200
1000
3.7
200
1000
3
Harness Board Accessories – Tie Mount Fixtures
Harness Board Accessories – Wire Termination
Harness Board Standoff Posts and Adapter
Wire End Holder
• Secures wire ends while harness is being fabricated
• Used with #28 thru #16 AWG wires
• Used to hold a push mount accessory or cable tie at a specific location on a harness board
• For indoor use only
.28 DIA
(7.2)
TYP. 3 PLACES
E
.16 (4.1)
.53 .77
(13.5) (20.0)
.29 (7.4)
.50
(12.7)
1.22
(31.0)
B
D
B
(Dia)
A
A
.37
(9.4)
Part Number
WEH-E8-C
Material
Acetal
Color
Black
Mounting Method
Two #8 (M4) Screws
Std. Std.
Pkg. Ctn.
Qty. Qty.
100 1000
Spring Wire Breakout System
• Harness board spring and spring holder holds wire ends secure
while harness is being fabricated
• Wires simply pull out from spring when harness is removed
.21 DIA
(5.3)
TYP. 2 PLACES
C
.18 (4.6)
• Each SHH Spring Holder is supplied with one rigid wire piece to
hold the spring laterally and two #8 (M4), 2 inch (50.8mm)
hex head wood screws; purchase spring separately
Part Number
HB2SP19-X
Height
A
In.
mm
2.00 50.8
Hole
Diameter
B
In.
mm
.20
5.2
Length
C
In.
m
2.00
50.8
Width
D
In.
mm
.50
12.7
HB2SP25-X
2.00
50.8
.30
7.5
4.00
101.6
.50
HBUA-X
.31
7.9
.28
7.1
3.00
76.2
1.00
Std.
Pkg.
Qty.
10
Std.
Ctn.
Qty.
100
For Use With
PLWP, PRWP,
WS, VWS,
HWS, TPM
Material
Aluminum
Mounting
Method
M6 Screw
12.7
PLWP, PRWP,
PLP, THMS,
HCMP, PMCC
Aluminum
M6 Screw
10
100
25.4
HB2SP19-X,
HB2SP25-X
Nylon 6.6
#10 (M5)
Screw
10
100
.19 (4.8) Dia.
.53 (13.4)
Tie Harness Mounts – Nylon and Heat Stabilized Nylon 6.6
A
.44 (11.2)
• Designed to be attached to the wire harness
during assembly
• Cable ties can be installed by hand or with Panduit
automatic cable tie tools
• Used with harness board standoff posts
1.30
(33.0)
A
PBSC
SHH
Part Number
PBSC1-X
PBSC3-X
PBSC6-X
PBSC12-X
SHH1-S8-X
SHH3-S8-X
Hole Spacing
A
In.
mm
1.00
25.4
3.00
76.2
6.00
152.4
12.00
304.8
1.85
47.0
6.80
172.7
Material
Color
—
—
—
—
Steel
Nylon 6.6
Natural
Std.
Pkg.
Qty.
10
10
10
10
10
10
Mounting Method
SHH1 Spring Holder
Two #8 (M4) Screws
SHH3 Spring Holder
Two #8 (M4) Screws
Two #8 (M4) Screws
Two #8 (M4) Screws
Std.
Ctn.
Qty.
100
100
100
100
100
100
1.54
(39.1)
Part Number
• Will accept wires up to 18 AWG
• Fanning strip can remain as part of completed harness
.04 (1.0)
.04 (1.0)
.12 (3.0)
.62 (15.7)
.31 (7.9)
.06 (1.5)
1.50 .75
(38.1) (19.0)
12.1
(307.8)
FS156
FSHH-X
4
.56
(14.2)
FSH40
Part Number
FS156-C
FSH40-X
1.42
(36.0)
.04 (1.0)
6.00 (152.4)
.60
(15.2)
1.10
(28.0)
3.2 (81.3)
Color
Natural
ABS
Black
Mounting Method
FSH Holder
Four #8 (M4) Screws
Two #8 (M4) Screws
Maximum
Panel
Thickness
In.
mm
Panel
Hole
Diameter
In.
mm
Material
Color
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Std. Std.
Pkg. Ctn.
Qty. Qty.
100 1000
10
100
10
THMSP20-C
THMSP20-C30
M, I, S
M, I, S
.160
.160
4.1
4.1
.244 – .283
.244 – .283
6.2 – 7.2
6.2 – 7.2
Nylon 6.6
Heat Stabilized
Nylon 6.6
Natural
Black
Push barb
Push barb
100
100
1000
1000
THMSP25-C
THMSP25-C30
M, I, S
M, I, S
.230
.230
5.8
5.8
.244 – .283
.244 – .283
6.2 – 7.2
6.2 – 7.2
Nylon 6.6
Heat Stabilized
Nylon 6.6
Natural
Black
Push barb
Push barb
100
100
1000
1000
FOR DISCRETE WIRING – No location tab
FSHH
Material
Nylon 6.6
Used
with
Cable
Ties*
FOR CORRUGATED TUBING – A location tab on the mount shelf aligns with the corrugated tubing grooves
to ensure proper mount location during assembly
.53
(13.5)
.16 (4.0)
.37
(9.4)
.160
(4.1)
Fanning Strip System
• Holds wires in a specific orientation
• No sharp edges to damage wire insulation
• Available with or without corrugated tubing location tab
• Natural nylon material for indoor use
• Heat stabilized nylon material (30) for high temperature
applications – indoor use
THMSP20F-C
THMSP20F-C30
M, I, S
M, I, S
.160
.160
4.1
4.1
.244 – .283
.244 – .283
6.2 – 7.2
6.2 – 7.2
Nylon 6.6
Heat Stabilized
Nylon 6.6
Natural
Black
Push barb
Push barb
100
100
1000
1000
THMSP25F-C
THMSP25F-C30
M, I, S
M, I, S
.230
.230
5.8
5.8
.244 – .283
.244 – .283
6.2 – 7.2
6.2 – 7.2
Nylon 6.6
Heat Stabilized
Nylon 6.6
Natural
Black
Push barb
Push barb
100
100
1000
1000
*Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard.
100
5
Harness Board Accessories – Tie Mount Fixtures
Harness Board Accessories – Wire Termination
Harness Board Standoff Posts and Adapter
Wire End Holder
• Secures wire ends while harness is being fabricated
• Used with #28 thru #16 AWG wires
• Used to hold a push mount accessory or cable tie at a specific location on a harness board
• For indoor use only
.28 DIA
(7.2)
TYP. 3 PLACES
E
.16 (4.1)
.53 .77
(13.5) (20.0)
.29 (7.4)
.50
(12.7)
1.22
(31.0)
B
D
B
(Dia)
A
A
.37
(9.4)
Part Number
WEH-E8-C
Material
Acetal
Color
Black
Mounting Method
Two #8 (M4) Screws
Std. Std.
Pkg. Ctn.
Qty. Qty.
100 1000
Spring Wire Breakout System
• Harness board spring and spring holder holds wire ends secure
while harness is being fabricated
• Wires simply pull out from spring when harness is removed
.21 DIA
(5.3)
TYP. 2 PLACES
C
.18 (4.6)
• Each SHH Spring Holder is supplied with one rigid wire piece to
hold the spring laterally and two #8 (M4), 2 inch (50.8mm)
hex head wood screws; purchase spring separately
Part Number
HB2SP19-X
Height
A
In.
mm
2.00 50.8
Hole
Diameter
B
In.
mm
.20
5.2
Length
C
In.
m
2.00
50.8
Width
D
In.
mm
.50
12.7
HB2SP25-X
2.00
50.8
.30
7.5
4.00
101.6
.50
HBUA-X
.31
7.9
.28
7.1
3.00
76.2
1.00
Std.
Pkg.
Qty.
10
Std.
Ctn.
Qty.
100
For Use With
PLWP, PRWP,
WS, VWS,
HWS, TPM
Material
Aluminum
Mounting
Method
M6 Screw
12.7
PLWP, PRWP,
PLP, THMS,
HCMP, PMCC
Aluminum
M6 Screw
10
100
25.4
HB2SP19-X,
HB2SP25-X
Nylon 6.6
#10 (M5)
Screw
10
100
.19 (4.8) Dia.
.53 (13.4)
Tie Harness Mounts – Nylon and Heat Stabilized Nylon 6.6
A
.44 (11.2)
• Designed to be attached to the wire harness
during assembly
• Cable ties can be installed by hand or with Panduit
automatic cable tie tools
• Used with harness board standoff posts
1.30
(33.0)
A
PBSC
SHH
Part Number
PBSC1-X
PBSC3-X
PBSC6-X
PBSC12-X
SHH1-S8-X
SHH3-S8-X
Hole Spacing
A
In.
mm
1.00
25.4
3.00
76.2
6.00
152.4
12.00
304.8
1.85
47.0
6.80
172.7
Material
Color
—
—
—
—
Steel
Nylon 6.6
Natural
Std.
Pkg.
Qty.
10
10
10
10
10
10
Mounting Method
SHH1 Spring Holder
Two #8 (M4) Screws
SHH3 Spring Holder
Two #8 (M4) Screws
Two #8 (M4) Screws
Two #8 (M4) Screws
Std.
Ctn.
Qty.
100
100
100
100
100
100
1.54
(39.1)
Part Number
• Will accept wires up to 18 AWG
• Fanning strip can remain as part of completed harness
.04 (1.0)
.04 (1.0)
.12 (3.0)
.62 (15.7)
.31 (7.9)
.06 (1.5)
1.50 .75
(38.1) (19.0)
12.1
(307.8)
FS156
FSHH-X
4
.56
(14.2)
FSH40
Part Number
FS156-C
FSH40-X
1.42
(36.0)
.04 (1.0)
6.00 (152.4)
.60
(15.2)
1.10
(28.0)
3.2 (81.3)
Color
Natural
ABS
Black
Mounting Method
FSH Holder
Four #8 (M4) Screws
Two #8 (M4) Screws
Maximum
Panel
Thickness
In.
mm
Panel
Hole
Diameter
In.
mm
Material
Color
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Std. Std.
Pkg. Ctn.
Qty. Qty.
100 1000
10
100
10
THMSP20-C
THMSP20-C30
M, I, S
M, I, S
.160
.160
4.1
4.1
.244 – .283
.244 – .283
6.2 – 7.2
6.2 – 7.2
Nylon 6.6
Heat Stabilized
Nylon 6.6
Natural
Black
Push barb
Push barb
100
100
1000
1000
THMSP25-C
THMSP25-C30
M, I, S
M, I, S
.230
.230
5.8
5.8
.244 – .283
.244 – .283
6.2 – 7.2
6.2 – 7.2
Nylon 6.6
Heat Stabilized
Nylon 6.6
Natural
Black
Push barb
Push barb
100
100
1000
1000
FOR DISCRETE WIRING – No location tab
FSHH
Material
Nylon 6.6
Used
with
Cable
Ties*
FOR CORRUGATED TUBING – A location tab on the mount shelf aligns with the corrugated tubing grooves
to ensure proper mount location during assembly
.53
(13.5)
.16 (4.0)
.37
(9.4)
.160
(4.1)
Fanning Strip System
• Holds wires in a specific orientation
• No sharp edges to damage wire insulation
• Available with or without corrugated tubing location tab
• Natural nylon material for indoor use
• Heat stabilized nylon material (30) for high temperature
applications – indoor use
THMSP20F-C
THMSP20F-C30
M, I, S
M, I, S
.160
.160
4.1
4.1
.244 – .283
.244 – .283
6.2 – 7.2
6.2 – 7.2
Nylon 6.6
Heat Stabilized
Nylon 6.6
Natural
Black
Push barb
Push barb
100
100
1000
1000
THMSP25F-C
THMSP25F-C30
M, I, S
M, I, S
.230
.230
5.8
5.8
.244 – .283
.244 – .283
6.2 – 7.2
6.2 – 7.2
Nylon 6.6
Heat Stabilized
Nylon 6.6
Natural
Black
Push barb
Push barb
100
100
1000
1000
*Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard.
100
5
Harness Board Accessories – Tie Mount Fixtures (Continued)
Harness Board Accessories – Tie Mount Fixtures (Continued)
Harness Board Fixtures
Automatic Cable Tie Mounts
■
■
■
■
Multiple sizes work with industry standard panel thickness and hole
diameters for greater application flexibility
Low profile design keeps bundle close to mounting surface saving space
where tight assemblies are required, and providing greater protection for
bundles in high vibration applications
Load rating of mounts supports compatible BT1.5M-XMR and
PLT1.5M-XMR cable ties
2.38
(60)
■
■
■
2.50
(64)
5.04
(128)
■
Automatic alignment orients the tool head with the mount for reliable feeding of the
cable tie through the mount to speed installation
Multiple fixture configurations allow mounting in horizontal, vertical, or 45° orientation
to reduce installation time and improve ergonomics
Color designation ensures inserts and mounts are correctly matched
Integrated switch* capability enables placement of a switch to detect the mount’s
presence providing an input to a quality control system, eliminating the need for
additional inspection
Activation device on harness board fixture prevents tool from operating unless it is
properly engaged in the fixture for operator safety
ATMB (Base)
Part Number
ATMB
A
Description
Base
C
Mounting
Method
Screw
base to
harness board with
1/4" screws
Color
Black
Material
Acetal
Std.
Pkg.
Qty.*
10
Std.
Ctn.
Qty.
10
B
Part Number
ATM-W187-M
Used with
Cable Ties
A
Length
In.
mm
B
Width
In.
mm
C
Height
In.
mm
Maximum
Panel
Thickness
In.
mm
Panel Hole
Diameter Range
In.
mm
ATM-W187-M20
.58
ATM-W187-M30
ATM-W250-M
BT1.5M-XMR,
PLT1.5M-XMR
.80
20.5
.35
14.6
9.0
.17 – .20 4.3 – 4.9
.12
ATM-W250-M30
16.6
Color
Natural
Nylon 6.6
Black
1000
5000
Heat
Stabilized
Nylon 6.6
Black
1000
5000
3.0
ATM-W250-M20
.66
Material
Std.
Pkg.
Qty.
1000
.23 – .26 5.7 – 6.6
Std.
Ctn.
Qty.
5000
Natural
1000
5000
Nylon 6.6
Black
1000
5000
Heat
Stabilized
Nylon 6.6
Black
1000
5000
ATMI-W187-X
Insert for
ATM-W187 mount
Snaps into ATMB
Yellow
Acetal
10
50
ATMI-W250-X
Insert for
ATM-W250 mount
Snaps into ATMB
Red
Acetal
10
50
ATMI-XMR
Used for cable tie
installations where
mounts are
NOT required
Snaps into ATMB
Black
Acetal
10
50
ATMC
Clamp used to secure
the ATMB (base) in a
vertical or 45° position
Screw clamp to
harness board with
1/4" screws
Black
Steel
10
10
Order number of pieces required, in multiples of Standard Package Quantity.
*The Omron Electronics D2SW-3L1HS switch is compatible with the ATM system. Similar switches from other manufacturers may also
be suitable.
Omron is a registered trademark of Omron Corporation.
Order number of pieces required, in multiples of Standard Package Quantity.
6
7
Harness Board Accessories – Tie Mount Fixtures (Continued)
Harness Board Accessories – Tie Mount Fixtures (Continued)
Harness Board Fixtures
Automatic Cable Tie Mounts
■
■
■
■
Multiple sizes work with industry standard panel thickness and hole
diameters for greater application flexibility
Low profile design keeps bundle close to mounting surface saving space
where tight assemblies are required, and providing greater protection for
bundles in high vibration applications
Load rating of mounts supports compatible BT1.5M-XMR and
PLT1.5M-XMR cable ties
2.38
(60)
■
■
■
2.50
(64)
5.04
(128)
■
Automatic alignment orients the tool head with the mount for reliable feeding of the
cable tie through the mount to speed installation
Multiple fixture configurations allow mounting in horizontal, vertical, or 45° orientation
to reduce installation time and improve ergonomics
Color designation ensures inserts and mounts are correctly matched
Integrated switch* capability enables placement of a switch to detect the mount’s
presence providing an input to a quality control system, eliminating the need for
additional inspection
Activation device on harness board fixture prevents tool from operating unless it is
properly engaged in the fixture for operator safety
ATMB (Base)
Part Number
ATMB
A
Description
Base
C
Mounting
Method
Screw
base to
harness board with
1/4" screws
Color
Black
Material
Acetal
Std.
Pkg.
Qty.*
10
Std.
Ctn.
Qty.
10
B
Part Number
ATM-W187-M
Used with
Cable Ties
A
Length
In.
mm
B
Width
In.
mm
C
Height
In.
mm
Maximum
Panel
Thickness
In.
mm
Panel Hole
Diameter Range
In.
mm
ATM-W187-M20
.58
ATM-W187-M30
ATM-W250-M
BT1.5M-XMR,
PLT1.5M-XMR
.80
20.5
.35
14.6
9.0
.17 – .20 4.3 – 4.9
.12
ATM-W250-M30
16.6
Color
Natural
Nylon 6.6
Black
1000
5000
Heat
Stabilized
Nylon 6.6
Black
1000
5000
3.0
ATM-W250-M20
.66
Material
Std.
Pkg.
Qty.
1000
.23 – .26 5.7 – 6.6
Std.
Ctn.
Qty.
5000
Natural
1000
5000
Nylon 6.6
Black
1000
5000
Heat
Stabilized
Nylon 6.6
Black
1000
5000
ATMI-W187-X
Insert for
ATM-W187 mount
Snaps into ATMB
Yellow
Acetal
10
50
ATMI-W250-X
Insert for
ATM-W250 mount
Snaps into ATMB
Red
Acetal
10
50
ATMI-XMR
Used for cable tie
installations where
mounts are
NOT required
Snaps into ATMB
Black
Acetal
10
50
ATMC
Clamp used to secure
the ATMB (base) in a
vertical or 45° position
Screw clamp to
harness board with
1/4" screws
Black
Steel
10
10
Order number of pieces required, in multiples of Standard Package Quantity.
*The Omron Electronics D2SW-3L1HS switch is compatible with the ATM system. Similar switches from other manufacturers may also
be suitable.
Omron is a registered trademark of Omron Corporation.
Order number of pieces required, in multiples of Standard Package Quantity.
6
7
Harness Board Accessories – Complementary Products from Panduit
Fully Automatic Cable Tie Installation Systems
A complete single-source solution for high volume harnessing, assembly, fastening, and packaging applications. With cycle times
of less than one second, the systems are up to six times faster than conventional manual cable tie installations.
Harness Board Accessories
Bundling Systems
Bundling and Mounting System
PAT/Robot Integration Kit
Abrasion Protection Products
Panduit Abrasion protection products provide an economical and easy way to insulate, protect, bundle, and color-code
components and cable. A wide variety of sizes and materials are available to meet a broad range of indoor and
outdoor applications.
Panduit harness board accessories allow an installer to
quickly configure a specific arrangement of wires, to aid in
required wire bundling and termination. Panduit’s
comprehensive line of harness board accessories can
significantly reduce the labor input required for field installation of
wires and cables and simplify harness board operations. These
products hold wire bundles at a uniform height from a harness
board to ease manual or automatic cable tie installation. These
accessories help maintain end product consistency, reduce costly
rework and maximize workplace safety.
Key Features
Pan-Wrap™ Split Harness Wrap
Corrugated Loom Tubing
Braided Expandable Sleeving
Spiral Wrap
Large selection of
board-mounted accessories
Comprehensive and versatile offering ensures there is a product to fit virtually
every harness board application
A wide range of sizes
Panduit harness board accessories can be used to manage wire
configurations up to 2 inches bundle diameter for maximum flexibility
Uniform standoff height
Accessories space the wire bundle at a uniform distance and height from the
harness board to allow simple cable tie application using manual or automatic
tooling to speed installation
Mounts designed to work with
harness board accessories
Panduit mounts can be integrated into the wiring harness at the harness
board to simplify deploying the harness onto the finished assembly to
speed installation
Snap-in, snap-out functionality
Harness board accessories hold the wires in a tight bundle, yet allow
completed harness to be easily removed by lifting upward on the harness
Spring wire breakout and wire
end holders
Individual wires are held in the bundle to maintain harness structure while
allowing consistent termination of wires
Te r m i n a l s , D i s c o n n e c t s , F e r r u l e s a n d S p l i c e s
Connectors are available loose piece for manual installation and continuously molded for high volume automated installation.
Panduit’s manual and automated installation tooling improve productivity and reliability for industrial settings.
Wide Variety of Terminals,
Disconnects, and Splices
4-Ton Press and
Universal Applicator
Benefits
Reel Smart ™ Continuously
Molded Connectors
Dimensions are in inches (Dimensions in parentheses are metric)
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Jalisco, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800-777-3300 and reference WACB20
©2010 Panduit Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
Product Bulletin Number SA-WACB20
Replaces SA101N556-WA
8/2010
w w w. p a n d u i t . c o m
工商网监
湘ICP备2023018690号
