C050X044KBT

18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 TDS: Effective Date: Revision: GMK4 16JUN2014 6 Technical Data Sheet Thermal Transfer Printable Polyimide Film This specification is intended to outline the physical and chemical properties of PANDUIT’s pressure sensitive polyimide material and include the following part numbers and printable material identifiers: Part Number Prefixes TTC*KW TTC*K Printable Material Suffixes KBT KCT PRODUCT SPECIFICATIONS: Description: Material is a top coated polyimide film with a pressure sensitive adhesive. This product is halogen free and RoHS compliant (European Union directive 2002/95/EC). Use: Designed for barcode or alphanumeric identification of printed circuit boards, or related electronic components. It is the ideal label to withstand surface mount board processes, on either the top or bottom side of the board. Properties: The topcoat, in combination with Panduit thermal transfer resin ribbon, passes the requirements of MIL-STD-202G, Notice 12, Method 215K. The print resists smearing, even when the board and label are directly removed from a reflow or wave solder environment. Preheating the labeled product can further enhance print permanence in the case of extreme solvent and/or abrasion exposure, although this is not typically required for board processing applications. Print Methods: This material is recommended for thermal transfer printing. Adhesive: Acrylic based, pressure sensitive adhesive Standard Colors: Opaque white, Opaque tan Thickness: 4.5 +/- 0.5 mils (coated substrate and adhesive) Service Temperature Range: -40°F to 350°F (-40°C to 177°C) Minimum Application Temperature: 50°F (10°C) Storage Conditions: Store at 70°F (21°C) and 50% Relative Humidity. PROPERTIES: PERFORMANCE: Peel Adhesion to Stainless Steel: Shear Adhesion: 40 oz/in width minimum (PSTC-101, 15 min. dwell) Elongation: Long Term High Service Temperature: Low Service Temperature: 24 hours minimum(PSTC-107, procedure A) MD: 45 +/- 10% lbs./inch width (PSTC-131) TD: 40 +/- 10% lbs./inch width (PSTC-131) MD and TD: 65% +/- 15% (PSTC-131) 1000 hours at 212°F (100°C), no change observed 1000 hours at -94°F (-70°C), no change observed Humidity Resistance: 1000 hours at 100°F(37°C), 95% R.H., no change observed Abrasion Resistance: Taber Abraser, CS-10 wheels, 250 g/arm, 30 cycles, no change observed Maximum Intermittent Temperature: Opaque white: 482°F (250°C)/> 30 min., 527°F (275°C)/> 20 min., 572°F (300°C)/> 10 min, 617°F (325°C)/5 min. Tensile Strength: Opaque tan: 482°F (250°C)/ 5 min., 527°F (275°C)/ 1 min., 572°F (300°C)/ 1 min, 617°F (325°C)/ 1 min. Page 1 of 4  2014 PANDUIT Corp TDS: GMK4 / / 18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 TDS: Effective Date: Revision: GMK4 16JUN2014 6 Technical Data Sheet UV Resistance: *3000 hours in Xenon Arc Weatherometer, no change observed (ASTM G154) *3000 hrs. equates to 5 yrs. of assimilated outdoor UV exposure. I. 2 mil White Thermal Transfer Printable Polyimide Heat/Chemical Resistance Labels printed with 3:1 ratio barcodes with 6 mil (0.152mm) X dimension bars. Samples exposed to indicated environments. Test Environment RMER4BL Rating before exposure1 Control B 260C heat, 5 minutes B 170C heat, 2 hours A Kyzen Corp, Aquanox B SSA, 30% aqueous, 40-45C, 10 minutes2 RE-ENTRY.KNI 2000 B Terpene, 40-45C, 10 minutes2 Alpha Metals Inc. 2110 A Saponifier, 6% aqueous, 65-70C, 10 minutes2 Isopropanol 99%, 82C, 10 A minutes Deionized water, 100C, A 10 minutes 1,1,1 Trichloroethane, A 74C, 10 minutes BIOACT EC-7R Terpene A Cleaner, 40-45C, 10 minutes2 Acetone, 30C, A 10 minutes B B A B RMER4BL-C Rating before exposure1 A A A A A A A A RMEH4BL Rating before exposure1 A A A A A A A A C A C A NR C A NR A B B A A A NR A A A A A A A A A NR B A A A NR F A NR A NR Rating after exposure1 Rating after exposure1 Rating after exposure1 1 Rating determined using PSC QuickCheck 850 Scanner. 2 Followed by 2 minute immersion in deionized water at 100C. NR – NOT RATED Page 2 of 4  2014 PANDUIT Corp TDS: GMK4 / / 18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 TDS: Effective Date: Revision: GMK4 16JUN2014 6 Technical Data Sheet PROPERTIES Chemical Resistance TEST METHOD MIL-STD-202G, Notice 12, Method 215K Labels printed with alphanumerics and 3:1 ratio barcodes with 6 mil (0.152mm) X dimension bars. Samples subjected to 3 cycles of three minute immersions immediately followed by a toothbrush rub after each immersion. TEST FLUID RMER4BL RMER4BL-C RMEH4BL Solvent A Loss of print legibility Loss of print density Loss of print legibility 1 part IPA, 3 parts Mineral Spirits Solvent B Solvent deleted per Solvent deleted per Solvent deleted per 1,1,1 Trichloroethane Notice 12 Notice 12 Notice 12 Solvent C No visible effect Loss of print legibility No visible effect Terpene Defluxer Solvent D No visible effect No visible effect Loss of print density Saponifier Aquanox SSATM is a trademark of Kyzen Corporation. EC-7RTM is a trademark of Petroferm Inc. RE-ENTRYTM is a registered trademark of Environsolv Inc. References: ASTM: American Society for Testing and Materials (U.S.A.) PSTC: Pressure Sensitive Tape Council (U.S.A.) S1: International Systems of Units. II. 2 mil Tan Thermal Transfer Printable Polyimide Heat/Chemical Resistance Labels printed with 3:1 ratio barcodes with 6 mil (0.152mm) X dimension bars. Samples exposed to indicated environments. Test Environment RMER4BL RMER4BL-C RMEH4BL Rating before Rating after Rating Rating after Rating Rating after exposure1 exposure1 before before exposure1 exposure1 1 1 exposure exposure Control D D A A A A 260C heat, 5 minutes C C A A A A 170C heat, 2 hours D D A A A A Kyzen Corp, Aquanox D D A A A A SSA, 30% aqueous, 40-45C, 10 minutes2 RE-ENTRY.KNI 2000 D D A A A A Terpene, 40-45C, 10 minutes2 Alpha Metals Inc. 2110 D D A A A A Saponifier, 6% aqueous, 65-70C, 10 minutes2 Isopropanol 99%, 82C, 10 C C A A A A minutes Deionized water, 100C, C C A A A A 10 minutes 1,1,1 Trichloroethane, C C A A A A 74C, 10 minutes Page 3 of 4  2014 PANDUIT Corp TDS: GMK4 / / 18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 TDS: Effective Date: Revision: GMK4 16JUN2014 6 Technical Data Sheet Test Environment BIOACT EC-7R Terpene Cleaner, 40-45C, 10 minutes2 Acetone, 30C, 10 minutes RMER4BL C D C RMER4BL-C A A RMEH4BL A A D A A A A 1 Rating determined using PSC QuickCheck 850 Scanner. 2 Followed by 2 minute immersion in deionized water at 100C. PROPERTIES Chemical Resistance TEST METHOD MIL-STD-202G, Notice 12, Method 215K Labels printed with alphanumerics and 3:1 ratio barcodes with 6 mil (0.152mm) X dimension bars. Samples subjected to 3 cycles of three minute immersions immediately followed by a toothbrush rub after each immersion. TEST FLUID RMER4BL RMER4BL-C RMEH4BL Solvent A No visible effect No visible effect No visible effect 1 part IPA, 3 parts Mineral Spirits Solvent B Solvent deleted per Solvent deleted per Solvent deleted per 1,1,1 Trichloroethane Notice 12 Notice 12 Notice 12 Solvent C No visible effect Loss in print density No visible effect Terpene Defluxer Solvent D No visible effect No visible effect No visible effect Saponifier Aquanox SSATM is a trademark of Kyzen Corporation. EC-7RTM is a trademark of Petroferm Inc. RE-ENTRYTM is a registered trademark of Environsolv Inc. References: ASTM: American Society for Testing and Materials (U.S.A.) PSTC: Pressure Sensitive Tape Council (U.S.A.) S1: International Systems of Units. APPROVALS UL Recognized: UL 969 CUL Recognized: C22.2 No. 0.15-01 File Number: MH 14979 File Number: MH 14979 LIMITED WARRANTY All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers of seller and manufacturer. NEITHER PANDUIT NOR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER. THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. Page 4 of 4  2014 PANDUIT Corp TDS: GMK4 / /