CAMT

ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties GS4MT Hand Operated Installation Tool • • • • Single handle operation for fast installation Cable tie side entry for immediate positioning of tie and tool Controlled tension, fully adjustable Easy removal of excess tie B2. Cable Accessories B3. Stainless Steel Ties Part Number Part Description Used with standard, light-heavy, and heavy cross section Pan-Steel ® type GS4MT MLT ties, type MLTC/MLTFC coated ties, and type MLTDH double wrapped ties. C1. Wiring Duct C2. Surface Raceway • Qualified product listed per MIL Standard MS90387-3 • Automatically tensions and cuts off tie when predetermined tension is reached • Installs standard .18 inch (4.6mm), light-heavy .25 inch (6.4mm) and heavy .31 inch (7.9mm) cross section ties Std. Pkg. Qty. 1 K4M-BLD Replacement cutter blade for GS4MT. 1 K4MTG Replacement tension gripper for GS4MT. 1 CAMT Cut-off accessory. Use this accessory with GS4MT tool to cut MBH or MBS continuous banding. Accessory drops in place for use. 1 GS4MT C3. Abrasion Protection C4. Cable Management Side Entry CAMT D1. Terminals D2. Power Connectors Tool Tension Locking Kits • For applications requiring a locking device on either the selector knob (one cross section size and tension only) or tension level adjustment (but allow cross section size changes) D3. Grounding Connectors Part Number Part Description TTLK3 Tool tension locking kit for GS4MT and PPTMT installation tools. E1. Labeling Systems E2. Labels Std. Pkg. Qty. 1 To lock selector knob and tension level. E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions To lock fine adjustment. F. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.