Panduit Corp.
World Headquarters
Tinley Park, IL 60487
800.777.3300
www.panduit.com
© 2016 Panduit Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
ELCB19--SA-ENG 07/2016
THE INFORMATION CONTAINED IN THIS CATALOG IS INTENDED AS A GUIDE FOR USE BY
PERSONS HAVING TECHNICAL SKILL AT THEIR OWN DISCRETION AND RISK. BEFORE USING
ANY PANDUIT PRODUCT, THE BUYER MUST DETERMINE THE SUITABILITY OF THE PRODUCT
FOR HIS/HER INTENDED USE AND BUYER ASSUMES ALL RISK AND LIABILITY WHATSOEVER
IN CONNECTION THEREWITH. PANDUIT DISCLAIMS ANY LIABILITY ARISING FROM ANY
INFORMATION CONTAINED HEREIN OR FOR ABSENCE OF THE SAME.
All Panduit products are subject to the terms, conditions and limitation of its then current Limited Product Warranty,
which can be found at www.panduit.com/warranty.
All trademarks, service marks, trade names, product names, and logos appearing in this document are the property of
their respective owners.
www.panduit.com
Tool Solutions
A.
Cable
Ties
Table of Contents
A. Cable Ties
B.
Stainless
Steel
B. Stainless Steel
C. Wiring Duct
C.
Wiring
Duct
D. Terminals and Reel Smart™ System
E. Power Connectors and Grounding
F. Part Number Index
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
TOC Tool Solutions IEI 2016.indd 1
For service and technical support, call 800-777-3300.
i
7/25/16 7:34 AM
Tool Solutions
Notes
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
ii
Order number of pieces required, in multiples of Standard Package Quantity.
TOC Tool Solutions IEI 2016.indd 2
7/25/16 7:34 AM
Cable Ties
Manual Cable Tie Installation Tools
Panduit ® provides the most preferred hand-operated tools in the industry.
These versatile tools can be used for production, maintenance, or
construction applications.
A.
Cable
Ties
Panduit cable tie installation tools promote worker safety, help reduce
downtime, improve productivity and provide the lowest total installed
cost. As with all Panduit products, quality in design and production
along with customer service excellence, are assured.
Tool Highlights:
B.
Stainless
Steel
• Tool controlled tension and cut-off
– Ergonomic tools are durable, lightweight,
and easy to use
– Manual tools
– Pneumatic tools
• Installer controlled tension and cut-off
– Large selection of tools available for
complete range of Panduit cable ties
C.
Wiring
Duct
– Cost-effective alternative for small
volume applications
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_A_Cable_Ties_TC_v2.indd 1
For service and technical support, call 800-777-3300.
A.1
7/25/16 7:34 AM
Tool Solutions
Selection Guide – Hand Tools, Accessories, and Kits
A.
Cable
Ties
Hand Tools
Manual
Tool Controlled Tension and Cut-Off
Recommended usage: under 50,000 ties/year
Typical applications: Low to medium volume tie usage in OEM, MRO, or construction
Cross
Section
SM
M
I
S
HS
LH
H
EH
B.
Stainless
Steel
Tool Part Number — Page A.3
GTS-E GS2B GTH-E GS4H GS4EH
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Cross Sections
SM = Subminiature
M = Miniature
I = Intermediate
S = Standard
HS = Heavy-Standard
LH = Light-Heavy
H = Heavy
EH = Extra-Heavy
Installer Controlled Tension and Cut-Off
Recommended usage: under 10,000 ties/year
Typical applications: MRO or construction
Cross
Section
M
I
S
HS
LH
H
EH
C.
Wiring
Duct
Tool Part Number —
Page A.4
GTS-E GS2B GTH-E GS4H
X
X
X
X
X
X
X
X
X
X
X
X
Pneumatic
Recommended usage: under 250,000 ties/year
Typical applications: Medium to high volume
tie usage in OEM
D.
Terminals
and
Reel
Smart™
System
Cross
Section
M
I
S
HS
LH
H
EH
Accessories/Kits
E.
Power
Connectors
and
Grounding
Manual
Tool Tension
Locking Kits
Blade
Replacement Kits
F.
Part
Number
Index
A.2
Tool Holster
Pneumatic
Part Number
For Tool
KGTS-ETL
GTS-E, GTH-E
TTLK3
GS2B, GS4H
KGTSBLD
KGTH-EBLD
K2-BLD2
K4H-BLD
K4EH-BLD
GHH
Tool Part Number — Page A.5
PTS
PTH
X
X
X
X
X
X
X
X
Page
A.6
A.6
GTS-E
GTH-E
GS2B
GS4H
GS4EH
A.6
A.6
A.6
A.6
A.6
GTS-E, GS2B,
GTH-E, GS4H,
GS4EH
A.6
Pneumatic
Hose Assembly,
Filter/Regulator
Adapter Fittings
Part Number
KPTSTL
TTLK3
For Tool
PTS, PTH
PPTS
Page
A.6
A.6
PTS
PTH
PPTS
A.6
A.6
A.6
GHH
PTS, PPTS
A.6
PPH10
PL289N1
PHCAT
PTS, PTH,
PPTS
A.5
A.5
A.5
KGTSBLD
KPTHBLD
K2-BLD2
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_A_Cable_Ties_TC_v2.indd 2
7/25/16 7:34 AM
Cable Ties
Cable Tie Tools – Tool Controlled Tension and Cut-Off
●●Used in production, maintenance, or construction
applications
●●A combination of design, operation, and construction
features, provides a long service life
●●Lightweight and balanced
●●No special maintenance required
●●Tool controlled tension provides flush cut-off and speeds
installation to lower installed cost
●●Easy to change tension adjustment and easy to operate
A.
Cable
Ties
●●Replacement blades available, see
page A.6
B.
Stainless
Steel
GTS-E
GS2B
C.
Wiring
Duct
GTH-E
GS4H
GS4EH
Weight
Std.
Pkg.
Qty.
1
Used with
Part Number
Cable Ties
GTS-E
SM, M, I, S
Oz.
10.4
g
294
Part Features
Ergonomic design with impact resistant
resin housing, narrow nose, cushion
handle and low impact cutoff.
GS2B
M, I, S
11.5
327
Metal tool with a durable powder
coat finish.
GTH-E
S, HS, LH, H
11.9
337
Ergonomic design with impact resistant
resin housing, narrow nose, and
cushion handle.
GS4H
S, HS, LH, H
16.0
454
Metal tool with a durable powder
coat finish.
QPL per Mil. Std. SAE AS81306 and
Mil. Spec. SAE AS90387
Mil. Spec. Part Number MS90387-2
1
GS4EH
LH, H, EH
16.0
454
Metal tool with a durable powder
coat finish.
QPL per Mil. Std. SAE AS81306 and
Mil. Spec. SAE AS90387
Mil. Spec. Part Number MS90387-4
1
Standards
QPL per Mil. Std. SAE AS81306 and
Mil. Spec. SAE AS90387
Mil. Spec. Part Number MS90387-1
1
D.
Terminals
and
Reel
Smart™
System
1
E.
Power
Connectors
and
Grounding
Cable tie cross section sizes: SM = Subminiature, M = Miniature, I = Intermediate, S = Standard,
HS = Heavy-Standard, LH = Light-Heavy, H = Heavy, EH = Extra-Heavy.
F.
Part
Number
Index
www.panduit.com
2016_IEI_A_Cable_Ties_TC_v2.indd 3
For service and technical support, call 800-777-3300.
A.3
7/25/16 7:34 AM
Tool Solutions
Cable Tie Tools – Installer Controlled Tension and Cut-Off
A.
Cable
Ties
●●Economical series of tools for maintenance or
construction applications
STS2
B.
Stainless
Steel
STS2
STH2
ST3EH
STHV
Weight
Std.
Pkg.
Qty.
1
Used with
Cable Ties
M, I, S
Color
Black
Oz.
2.5
g
71
Part Features
Economical tool with short handle span and top
loading feature for right- or left-handed users.
S, HS, LH, H
Red
2.5
71
Economical tool with short handle span and top
loading feature for right- or left-handed users.
1
ST3EH
LH, H, EH
Blue/Black
9.0
256
Durable, all steel construction with comfortable
plastic handles.
1
STHV
LH, H
Yellow
12.0
341
Durable all steel construction
and “travel stop” to prevent pinched fingers.
1
Part Number
STS2
STH2
C.
Wiring
Duct
●●Excellent tools for low volume applications
Cable tie cross section sizes: SM = Subminiature, M = Miniature, I = Intermediate, S = Standard,
HS = Heavy-Standard, LH = Light-Heavy, H = Heavy, EH = Extra-Heavy.
D.
Terminals
and
Reel
Smart™
System
Installation Procedure (STS2/STH2/ST3EH):
Installation Procedure (STHV):
Install cable tie around bundle and tension tie by squeezing
tool handle. Reduce tension slightly and twist tool 1/4" turn
either direction to cut off excess cable tie.
Install cable tie around bundle and tension tie by squeezing
tool handle. A separate lever cuts off excess cable tie.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
A.4
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_A_Cable_Ties_TC_v2.indd 4
7/25/16 7:35 AM
Cable Ties
Pneumatic Hand Tools – Tool Controlled Tension and Cut-Off
●P
neumatic, push button operation tensions and cuts off
excess tie in a fraction of a second
A.
Cable
Ties
● Easy to change tension adjustment
●D
urable, lightweight, ergonomic design is easy to operate
and designed to reduce operator fatigue
●O
perates on non-lubricated air, without
special maintenance
PTS
B.
Stainless
Steel
PTH
PTS
Oz.
17.3
g
490
Part Features
Ergonomic design with impact resistant resin housing and black knob;
replacement parts can be part of a scheduled maintenance program.
S, HS, LH, H
32.0
907
Ergonomic design with impact resistant resin housing and red knob;
replacement parts can be part of a scheduled maintenance program.
Part Number
PTS
PTH
Weight
Used with
Cable Ties
SM, M, I, S
Std.
Pkg.
Qty.
1
1
Note: All tools require the PPH10 hose and PL289N1 filter/regulator for proper operation.
Cable tie cross section sizes: SM = Subminiature, M = Miniature, I = Intermediate, S = Standard,
HS = Heavy-Standard, LH = Light-Heavy, H = Heavy, EH = Extra-Heavy.
C.
Wiring
Duct
Pneumatic Tool Accessories
PL289N1/PPH10
D.
Terminals
and
Reel
Smart™
System
PHCAT
Std.
Pkg.
Qty.
1
Part Number
PL289N1
Used with
Installation Tool
PTS, PPTS, PTH
PPH10
PTS, PPTS, PTH
10.0' (3m) hose assembly (regulator to tool); includes a 1/8" NPT male connector (to
regulator) and 1/8" female quick disconnect (to tool).
1
PHCAT
PTS, PPTS, PTH
Adapter fitting for 10.0' (3m) hose (PPH10) to regulator with 1/4" NPT female output port,
features 1/8" NPT female connection (to hose) and 1/4" NPT male connection
(to regulator).
1
Part Features
Filter/regulator .5 micron element, regulated range 3 – 100 psig, features 1/8" NPT female
output port (to hose PPH10) and 1/4" male quick disconnect to source air line.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_A_Cable_Ties_TC_v2.indd 5
For service and technical support, call 800-777-3300.
A.5
7/25/16 7:35 AM
Tool Solutions
Hand Tool Accessories:
A.
Cable
Ties
B.
Stainless
Steel
Tool Tension Locking Kits
●●For applications requiring a locking device on either the selector knob (one cross section size and tension only) or
tension level adjustment (but allow cross section size changes)
Part Number
KGTS-ETL
KPTSTL
TTLK3
Used with
Installation Tool
GTS-E, GTH-E
PTS, PTH
GS2B, GS4H, PPTS
Std.
Pkg.
Qty.
1
1
1
Contents
Lockout cap and screw.
Lockout cap and screw.
Selection locking clip and screws.
KGTS-ETL
Blade Replacement Kits
●●Blade replacement kits can be part of a user’s scheduled maintenance plan or used when cut-offs are not clean and crisp
C.
Wiring
Duct
KGTSBLD
D.
Terminals
and
Reel
Smart™
System
Part Number
KGTSBLD
KGTH-EBLD
K2-BLD2
K4H-BLD
K4EH-BLD
KPTHBLD
Used with
Installation Tool
GTS-E, PTS
GTH-E
GS2B, PPTS
GS4H
GS4EH
PTH
Contents
Threadlocker, screw, washer and replacement blade.
Threadlocker, screw, and replacement blade.
Threadlocker, screws, and replacement blade.
Threadlocker, screws, and replacement blade.
Threadlocker, screw, and replacement blade.
Threadlocker, screw, and replacement blade.
Std.
Pkg.
Qty.
1
1
1
1
1
1
Hand Tool Holster
●●Durable leather construction holster with rivets and extra tie-down strap to hold tool in place – easily fits on belt
Part Number
GHH
Used with Installation Tool
GTS-E, GS2B, GTH-E, GS4H, GS4EH, PTS, PPTS, ST3EH
Color
Black
Std.
Pkg.
Qty.
1
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
A.6
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_A_Cable_Ties_TC_v2.indd 6
7/25/16 7:35 AM
Cable Ties
Automatic Cable Tie
Installation Systems
The complete line of Panduit ® automatic cable tie installation systems offers a
superior solution for high volume harness, assembly, fastening and packaging
applications. These ergonomic systems increase productivity, provide
consistent performance, and reduce activities that lead to repetitive motion
injuries. A variety of tool options provide users with flexible solutions for their
unique application needs.
A.
Cable
Ties
B.
Stainless
Steel
System Highlights
Multiple systems improve productivity,
reliability, and versatility:
• Install a cable tie in less than one second
• Multiple cable tie styles and sizes for
maximum productivity
• Optional software for advanced system
monitoring and performance
C.
Wiring
Duct
• Recommended for annual usage of over
250,000 cable ties/year
• Typical applications: High volume OEM/
contract manufacturing
Combined, these innovations improve reliability, maximize productivity, and
lower installed costs. As with all Panduit products, quality in design and
production along with customer service excellence, are assured.
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
Note: Recommeneded for annual usage of over 250,000 cable ties/year. typical applications: high volume
OEM/contract manufacturing.
www.panduit.com
2016_IEI_A_Cable_Ties_TC_v2.indd 7
For service and technical support, call 800-777-3300.
A.7
7/25/16 7:35 AM
Tool Solutions
Selection Guide – Automatic Installation Systems and Reel-Fed Cable Ties
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
PAT1M/PAT1.5M Systems
Tool Head for use with MINIATURE Cross Section
Part Number
Description
PAT1M4.0
For miniature cross section up to .82"
(21mm) bundle diameter.
PAT1.5M4.0
For miniature cable ties up to 1.31"
(33mm) bundle diameter.
PAT1M4.0-BT
For miniature cross section up to .82"
(21mm) bundle diameter. For use
with Barb Ty.
PAT1.5M4.0-BT For miniature cable ties up to 1.31"
(33mm) bundle diameter. For use
with Barb Ty.
Dispenser
Part Number
PDM4.0
PDS-DI
Transfer Hose
Part Number
PHM1
PHM2
PHM3
PHM4
Page
A.8
A.8
A.8
A.8
Description
Stationary dispenser.
Data interface accessory – software
and interface card.
Page
A.9
A.10
Description
3.2' (1m) transfer hose.
6.5' (2m) transfer hose.
10.0' (3m) transfer hose.
13.1' (4m) transfer hose.
Page
A.9
A.9
A.9
A.9
Optional System Accessories
Part Number
Description
PDH10-37
Air hose.
PL283N1
Filter/regulator.
PATMBM
Bench mount and foot pedal.
D.
Terminals
and
Reel
Smart™
System
PAT2S/PAT3S Systems
Page
A.10
A.10
A.10
Tool Head for use with STANDARD Cross Section
Part Number
Description
PAT2S
For standard cross section up to
2.00" (51mm) bundle diameter.
PAT3S
For standard cross section up to
2.75" (70mm) bundle diameter.
Dispenser
Part Number
PDS
PD3S
PDS-DI
Transfer Hose
Part Number
PHS2
PHS3
Page
A.8
A.8
Description
Stationary dispenser, PAT2S.
Stationary dispenser, PAT3S.
Dispenser and data
interface software.
Page
A.9
A.9
A.10
Description
6.5' (2m) transfer hose.
10.0' (3m) transfer hose.
Page
A.9
A.9
Dispenser Frame
Part Number
Description
PDSF
Dispenser frame, PAT2S.
PD3SF
Dispenser frame, PAT3S.
Page
A.9
A.9
Optional System
Part Number
PDH10-37
PL283N1
PATSBM
Page
A.10
A.10
A.10
Accessories
Description
Air hose.
Filter/regulator.
Bench mount and foot pedal for
PAT2S and PAT3S.
Tool Head – Multiple sizes accommodate a wide variety of applications
●●Ergonomic, lightweight design reduces operator
fatigue and repetitive motion injuries – no counter
balance required
●●Right or left hand operation
●●Durable, one-piece cable tie tip collector (for cut-off tips)
●●Includes tension adjustment
●●Built-in safety interlock prevents false triggering if
anything obstructs jaw path
E.
Power
Connectors
and
Grounding
PAT1.5M4.0
PAT1M-4.0
Max. Bundle Dia.
F.
Part
Number
Index
A.8
Part Number
PAT1M4.0
PAT1.5M4.0
PAT1M4.0-BT
PAT1.5M4.0-BT
PAT2S
PAT3S
In.
.82
1.31
.82
1.31
2.00
2.75
mm
21
33
21
33
51
70
Dispenser/
Frame
PDM4.0
PDM4.0
PDM4.0
PDM4.0
PDS/PDSF
PD3S/PD3SF
PAT2S
Transfer Hose
PHM1, PHM2,
PHM3, PHM4
PHS2, PHS3
PAT3S
Used with Cable Ties
PLT1M-XMR
PLT1.5M-XMR
BT1M-XMR
BT1.5M-XMR
PLT2S-VMR
PLT3S-VMR
Std.
Pkg.
Qty.
1
1
1
1
1
1
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_A_Cable_Ties_TC_v2.indd 8
7/25/16 7:35 AM
Cable Ties
Dispensers
●●Microprocessor based controller monitors system
performance through a touch screen display (PDM4.0
only); provides production data and reporting, including
error detection and cycle count for improved reliability
●●Online HELP menu through LCD display in seven
languages (English, Spanish, German, Italian, French,
Czech, Japanese), is user-friendly for quick and
simple training
A.
Cable
Ties
B.
Stainless
Steel
PDM4.0
Part Number
PDM4.0
PDS
PD3S
PDS/PD3S
Used with
Tool Head
PAT1M4.0,
PAT1.5M4.0,
PAT1M4.0-BT,
PAT1.5M4.0-BT
PAT2S
PAT3S
Std.
Pkg.
Qty.
Description
Stationary dispenser with electronic display. Online help menu. System operates on
65 psig (minimum) non-lubricated filtered air and 100 – 24 FAC/TP or 60 MHz.
1
1
1
C.
Wiring
Duct
Transfer Hoses
PHM3
Part Number
PHM1
PHM2
PHM3
PHM4
PHS2
PHS3
Used with
Tool Head
PAT1M4.0,
PAT1.5M4.0,
PAT1M4.0-BT,
PAT1.5M4.0-BT
Length
Part Description
Transfers cable tie and signal from dispenser
to tool head; electrical connectors designed
for easy attachment provide a reliable,
secure connection.
PAT2S, PAT3S
Ft.
3.2
6.5
10.0
13.1
6.5
10.0
m
1
2
3
4
2
3
Std.
Pkg.
Qty.
1
1
1
1
1
1
D.
Terminals
and
Reel
Smart™
System
Dispenser Frame
Part Number
PDSF
PDSF
PD3SF
PD3SF
Used with
Dispenser
PDS (PAT2S)
Description
Metal frame supports the PDS dispenser for PAT2S
above the cable tie reel as ties are loaded into the
dispenser; can be used as a freestanding unit or
permanently mounted to a bench or cart.
PD3S (PAT3S) Assembly holds cable tie reel and rewinds the
packaging paper liner as cable ties are being loaded
into the dispenser.
Std.
Pkg.
Qty.
1
E.
Power
Connectors
and
Grounding
1
F.
Part
Number
Index
www.panduit.com
2016_IEI_A_Cable_Ties_TC_v2.indd 9
For service and technical support, call 800-777-3300.
A.9
7/25/16 7:35 AM
Tool Solutions
Optional System Accessories:
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
Filter/Regulator and Air Supply Hose
PL283N1
Part Number
PL283N1
Used with
Dispenser
PDM4.0, PDS
PDH10-37
PDM4.0, PDS
1
1
PDH10-37
Bench Mount
PATMBM
Part Number
PATMBM
PATSBM
D.
Terminals
and
Reel
Smart™
System
Description
Regulates air flow to dispenser. Filter/regulator 25 micron
(max.) element, 3/8" ports. Includes a male connector
and a 3/8" port.
Air hose from filter/regulator to dispenser; 10.0' (3m) –
includes standard air fittings.
Std.
Pkg.
Qty.
Used with
Tool Head
PAT1M4.0,
PAT1.5M4.0,
PAT1M4.0-BT,
PAT1.5M4.0-BT
PAT2S, PAT3S
Description
Allows hands-free operation for high volume usage.
Includes bench mount fixture and foot pedal assembly.
Std.
Pkg.
Qty.
1
1
Data Interface Software and Ethernet Enabled Dispenser
Panduit ® exclusive Ethernet enabled dispenser and customized data interface software allow production personnel to
monitor real-time data in a shop floor environment.
The Ethernet enabled dispenser provides a physical connection between the cable tie installation system and an Industrial
Ethernet Network via an RJ45 connection and internal Ethernet card.
E.
Power
Connectors
and
Grounding
●●Allows production and/or engineering personnel
the capability to measure and track production
performance such as job tracking, cycle counts, tool
and dispenser serial numbers, and routine maintenance
●●Provides the ability to send email notifications for specific
system messages
Part Number
PDS-DI
Used with
Dispenser
PDS
●●Data extraction and reporting capabilities on system
performance through an exportable electronic log; helps
identify operator training needs
●●Ability to monitor alerts from remote desktop locations
Description
Ethernet enabled PDS dispenser and data interface software.
Std.
Pkg.
Qty.
1
F.
Part
Number
Index
A.10
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_A_Cable_Ties_TC_v2.indd 10
7/25/16 7:35 AM
Cable Ties
PAT/Robot Integration Kit
●●Used with the PAT1M4.0, PAT1.5M4.0, PAT1M4.0-BT,
and PAT1.5M4.0-BT tool heads
●●Utilizes the PAT system electronic interface option,
PDM-EI, to optimally integrate the PAT system to a robot
for a completely automated cable tie installation process
PATM4.0-RK
Part Number
PATM4.0-RK
Components
Metallic housing
Transfer hose strain
relief kit
Quick start guides
Best practices
document
A.
Cable
Ties
●●Significantly reduces labor costs while improving
installation quality, reliability, and consistency
B.
Stainless
Steel
PATM-TT
Description
Includes a pneumatic trigger actuator for remote cable tie installation and a mounting
bolt pattern to ease PAT tool integration with a robot end effector for a robust and
accurate grip.
Std.
Pkg.
Qty.
1
Strain relief to maintain transfer hose bend radius reducing tie misfeeds due to sharp
hose bend radii during robot motion; also sold separately under part number PATM-RKS
(includes two 1-foot strain relief tubes with fastening cable ties).
C.
Wiring
Duct
Provides easily understood electrical, network, and mechanical installation instructions
minimizing the robot integrator’s design time and simplifying the integration process.
List of best practices when integrating the PAT system to a robot optimizing system
performance and productivity.
PATM-TT
Test tool with rubber
jaws
This test tool is used during robot cable tie installation programming, providing a safe
method to debug robot software without damaging actual PAT tools (test tool is not
provided with the PAT/Robot Integration Kit).
1
PATM-RKS
Transfer hose strain
relief kit
Strain relief to maintain transfer hose bend radius reducing cable tie misfeeds due to
sharp hose bend radii during robot motion; kit is also included on the PATM-RK kit or
sold separately (includes two 1-foot strain relief tubes with fastening cable ties).
1
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_A_Cable_Ties_TC_v2.indd 11
For service and technical support, call 800-777-3300.
A.11
7/25/16 7:35 AM
Tool Solutions
Notes
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
A.12
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_A_Cable_Ties_TC_v2.indd 12
7/25/16 7:35 AM
Stainless Steel
Stainless Steel Cable Ties
and Accessroies
A.
Cable
Ties
The Pan-Steel ® System provides a strong, durable method of bundling and
mechanical fastening, for all indoor, outdoor, and underground (including direct
burial) applications. The ties are designed for use in critical applications where
strength, vibration, radiation, weathering, corrosion and temperature extremes
are a factor.
• Patented locking head design assures
locking in any position, with a high rated
loop tensile strength for a durable solution
that delivers an extra margin of safety
• 201, 304, or 316 grade stainless steel
provides a strong, long-lasting method
of bundling and mechanical fastening in
harsh environments
• Accessories available to protect, speed, and
simplify the mounting of wires, cable, and
tubing with Panduit ® Pan-Steel ® Stainless
Steel Cable Ties
• Complete line of manual and powered
installation tools available with controlled
tension and automatic cut-off for lower
installed cost
• Large selection of stainless steel
cable ties to deliver maximum
design flexibility to match specific
application requirements
Panduit continues to develop stainless steel solutions for harsh environment
applications by solving customer problems with innovative products and
reliable tooling to achieve lowest installed cost.
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_B_Stainless_Steel_Ties_TC_V1.indd 1
For service and technical support, call 800-777-3300.
B.1
7/25/16 7:42 AM
Tool Solutions
Heat Trace Installation Tools
A.
Cable
Ties
●●Tools speed installation
●●Features high reliability, low maintenance, and long life
RT2HT
ST4MT
B.
Stainless
Steel
Ordering Information
Part Number
C.
Wiring
Duct
Std.
Pkg.
Qty.
Description
ST4MT
Installation tool for use with HTMLT. Manual tensioning controlled by
operator. This tool has a built in cutting lever for clean recessed cutoff.
1
RT2HT
Installation tool for use with standard to extra heavy ties. Side entry
design for immediate positioning of tie and tool in order to speed
installation. Tensioning controlled by operator. Use lowest tension setting
for this application.
1
Stainless Installation Tools
GS4MT Hand-Operated Installation Tool
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
●●Single handle operation for fast installation
●●Qualified product listed per MIL Standard MS90387-3
●●Controlled tension, fully adjustable
●●Installs standard 0.18 inch (4.6mm), light-heavy 0.25 inch
(6.4mm) and heavy 0.31 inch (7.9mm) cross section ties
●●Cable tie side entry for immediate positioning of tie
and tool
●●Easy removal of excess tie
Side Entry
GS4MT
F.
Part
Number
Index
B.2
Part Number
GS4MT
●●Automatically tensions and cuts off tie when
predetermined tension is reached
CAMT
Std.
Pkg.
Part Description
Qty.
Used with standard, light-heavy, and heavy cross section Pan-Steel type MLT
1
ties, type MLTC/MLTFC coated ties, and type MLTDH double
wrapped ties.
®
K4M-BLD
Replacement cutter blade for GS4MT.
1
K4MTG
Replacement tension gripper for GS4MT.
1
CAMT
Cut-off accessory. Use this accessory with GS4MT tool to cut MBH or MBS
continuous banding. Accessory drops in place for use.
1
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_B_Stainless_Steel_Ties_TC_V1.indd 2
7/25/16 7:42 AM
Stainless Steel
Tool Tension Locking Kits
A.
Cable
Ties
●●For applications requiring a locking device on either
the selector knob (one cross section size and tension
only) or tension level adjustment (but allow cross section
size changes).
To lock selector knob
and tension level.
B.
Stainless
Steel
To lock fine adjustment.
Part Number
TTLK3
Part Description
Tool tension locking kit for GS4MT and PPTMT installation tools.
Std.
Pkg.
Qty.
1
ST2MT and ST4MT Installation Tool
●●Cable tie side entry for immediate positioning of
tie and tool
●●Rugged, lightweight, easy-to-operate pliers-type tool
provides mechanical advantage
●●One hand operation – lightweight
●●Easy removal of excess tie
Part Number
ST2MT
ST4MT
C.
Wiring
Duct
●●Tool tension is controlled by installer
Part Description
Used with standard, light-heavy, heavy and extra-heavy cross section
Pan-Steel ® type MLT ties, type MLTC/MLTFC coated ties, wave ties,
and type MLTDH double wrapped ties. This tool has twist action
cut-off mechanism.
Installation tool for use with HTMLT. Manual tensioning controlled by
operator. This tool has a built in cutting lever for clean recessed cutoff.
Std.
Pkg.
Qty.
1
1
D.
Terminals
and
Reel
Smart™
System
RT2HT and RT2HTN Installation Tools
●●Cable tie side entry for immediate positioning of tie and
tool to speed installation
●●Multi-position rear handle provides flexibility for a one or
two hand installation
Part Number
RT2HT
●●Narrow nose tool design option available for applications
requiring installations in tight confined spaces
●●Replacement cutter blade and handle available
for RT2HT
Part Description
RT2HT
Used with extra-heavy, extra-heavy 15, and super-heavy cross section
Pan-Steel ® type MLT, Wave-Ty™, and MLTFC ties. Width of tool nose
2.60" (66.0mm).
RT2HTN
Narrow nose installation tool for use with extra-heavy, extra-heavy 15, and
super-heavy cross section Pan-Steel ® type MLT and MLTFC ties. Width of tool
nose 1.06" (27.0mm).
E.
Power
Connectors
and
Grounding
Std.
Pkg.
Qty.
1
1
F.
Part
Number
Index
RT2HTN
www.panduit.com
2016_IEI_B_Stainless_Steel_Ties_TC_V1.indd 3
For service and technical support, call 800-777-3300.
B.3
7/25/16 7:42 AM
Tool Solutions
HTMT Installation Tool
A.
Cable
Ties
●●Economical
●●Coiled tie end remaining after tensioning assures a
safe end
Part Number
HTMT
B.
Stainless
Steel
●●Manual tension, no cut-off
●●Installs ties parallel to the bundle
Std.
Pkg.
Part Description
Qty.
Used with standard, light-heavy, and heavy cross section Pan-Steel ® type MLT
1
ties, type MLTC/MLTFC coated ties, and type MLTDH double wrapped ties.
PPTMT Pneumatic Installation Tool
●●Power assisted tool for fast and effortless installation
●●One hand operation – lightweight
●●Controlled tension, fully adjustable
●●Operates 85 PSI (586 KPA Bar) non-lubricated air and
requires no special maintenance
●●Cable tie side entry for immediate positioning of tie
and tool
●●Automatic cut-off
C.
Wiring
Duct
Part Number
PPTMT
PPTMT
D.
Terminals
and
Reel
Smart™
System
PPH10
Side Entry
●●Easy removal of excess tie
Part Description
Pneumatic Installation tool for use with the following stainless steel cross
section ties:
• Type MLT: Standard, light-heavy, and heavy
• Type MLTFC: Standard and heavy
• Type MLTC and MLTDH: Heavy
Used with custom length banding cross sections:
• Type MB: Standard and heavy
• Type MBC: Heavy
Automatically tensions and cuts off tie flush* when predetermined tension is
reached, providing more reliable and consistent installations. Ideal for high
production applications Installs both standard 0.18 in. (4.4mm) and heavy
0.31 in. (7.9mm) cross section ties with the flip of the knob.
10.0' (3m) hose assembly (regulator to tool); includes a 0.13" (3.3mm) NPT
male connector (to regulator) and 0.13" (3.3mm) female quick disconnect
(to tool).
Std.
Pkg.
Qty.
1
1
PL289N1
Filter/regulator .5 micron element, regulated range 3 – 100 psig, features
0.13" (3.3mm) NPT female output port (to hose PPH10) and 0.25" (6.4mm)
male quick disconnect to source air line.
1
KPPTMTG
Replacement gripper kit for PPTMT.
1
KPPTMTB
Replacement blade kit for PPTMT.
1
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
B.4
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_B_Stainless_Steel_Ties_TC_V1.indd 4
7/25/16 7:42 AM
Stainless Steel
PBTMT Battery Powered Installation Tool
●●Lithium-Ion battery optimizes performance by installing
more cable ties per charge
●●Ergonomic tool design provides a compact lightweight
body, reducing operator fatigue
●●Automatic flush cut off enhances productivity with easy
one hand installation
●●Cable tie side entry allows quick side entry of tie into
tool to speed installation
Part Number
PBTMT
PBTMT
A.
Cable
Ties
●●360° rotating head allows access to confined spaces
●●Controlled tension mechanism provides consistent
installations every time
●●Battery indicator improves productivity with quick visual
identification of battery life
●●Variable speed trigger provides increased operator
control, for easy installation
Std.
Pkg.
Part Description
Qty.
Battery Powered Installation tool for use with the following stainless steel cross
1
section ties:
• Type MLT and MLTFC: Heavy, extra-heavy, and super-heavy
• Type MLTC: Heavy
• Type MLTDH: Extra-Heavy and super-heavy
Used with custom length banding cross sections:
• Type MB and MBC: Heavy, extra-heavy, and super-heavy
2 – 12 volt Lithium-Ion batteries and 115 volt, 60 Hz charger included
B.
Stainless
Steel
C.
Wiring
Duct
MTRT Retained Tension Manual Installation Tools
●●Adjustable detent mechanism provides user pre-set
controlled tension for repeatable installations and
maximum reliability
●●Smooth cable tie cut-off eliminates burrs or sharp edges
after installation to deliver added bundle protection and
job site safety
Part Number
●●Tie tensioning mechanism provides improved durability
compared to conventional gripper style tools
●●Change over kits available to allow for installation of all tie
cross sections with one tool
Part Description
Std.
Pkg.
Qty.
1
MTRTH
Retained tension installation tool for use with Pan-Steel ® heavy cross
section MRT and MRS style ties and MRT double wrapped style ties.
MTRTLS
Retained tension installation tool for use with Pan-Steel ® light-heavy
and standard cross section MRT and MRS style ties and MRT double
wrapped style ties.
1
KMTRTH
Change over kits allow for installation of heavy cross section MRT and
MRS style ties, and MRT double wrapped style ties in MTRTH tools.
1
KMTRTLS
Change over kits allow for installation of light-heavy and standard cross
section MRT and MRS style ties, and MRT double wrapped style ties in
MTRTLS tools.
1
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_B_Stainless_Steel_Ties_TC_V1.indd 5
For service and technical support, call 800-777-3300.
B.5
7/25/16 7:42 AM
Tool Solutions
BT2HT Hand Operated Installation Tool for Strapping
A.
Cable
Ties
●●Strap side entry
●●Easy removal of excess strap
●●Adjustable tension control
●●Replacement cutter blade and handle available
●●Multi-position rear handle provides flexibility for a one or
two hand installation
Part Number
BT2HT
B.
Stainless
Steel
●●Installs (3) sizes: 0.38 inch (9.5mm), 0.50 inch (12.7mm),
and 0.63 inch (15.9mm)
Part Description
Installation tool for use with 0.38" (9.5mm), 0.50" (12.7mm), and
0.63" (15.9mm) widths of Panduit ® Pan-Steel ® Strapping. Tensions, cuts
strapping, and secures the buckle tab. Lever cut off.
Std.
Pkg.
Qty.
1
KRT2BLD
Replacement cutter blade for RT2HT and BT2HT.
1
KRT2HNDL
Replacement cutter handle for RT2HT and BT2HT.
1
BT75SDT Hand Operated Installation Tool for MS75 Strapping
●●Screw drive tension mechanism provides high tension
with minimal effort, reducing operator fatigue
●●Heavy duty construction offers a longer service life
C.
Wiring
Duct
Part Description
Part Number
BT75SDT
●●Strapping side entry allows quick side entry of the strap
into tool to speed installation
Installation tool for use with 0.75" (19.1mm) width strapping only. Tensions
and cuts strapping. Screwdriver required for buckle closure (not included).
Std.
Pkg.
Qty.
1
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
B.6
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_B_Stainless_Steel_Ties_TC_V1.indd 6
7/25/16 7:43 AM
Wiring Duct
Wiring Duct Tools
Panduit ® offers a selection of Panduct ® Tools to aid cutting, modifying, and
installing wiring duct.
A.
Cable
Ties
Some of the features and benefits found in
Panduct ® Tools include:
• Wide selection of hand tools for cutting and
installing wiring duct
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_C_WiringDuct_v1_TC.indd 1
For service and technical support, call 800-777-3300.
C.1
7/25/16 7:43 AM
Tool Solutions
Panduct ® Installation Tools
A.
Cable
Ties
●●Panduit ® Panduct ® Bench Mount Wiring Duct Cutting Tool
and Duct Cutting Tool easily cut Panduct ® Wiring Duct
and Cover
●●TNR installs or removes Panduit nylon rivets, NR1-C and
NR1-M, quickly and easily
●●DFCT easily removes duct fingers in tight spaces
●●DNT-100 notches duct sidewalls to bottom scoreline for
tees and corner junctions
Part Number
Std.
Pkg.
Qty.
Part Description
Duct Cutting Tools
PBDCT*
B.
Stainless
Steel
PBDCT
Panduit bench-mount duct cutting tool. Cuts slotted wiring ducts and wiring
duct covers with up to 6" width and up to 5" height. Full 78.74" (2 meter)
measuring scale. Includes safety guarding.
Hand-held duct cutting tool.
DCT
1
1
*If ordering PBDCT outside the U.S., these part numbers must both be ordered: PBDCT-B and PBDCT-M.
Replacement Parts for Duct Cutting Tools
C.
Wiring
Duct
DCT
PBDCT-BLD
Replacement blade for PBDCT
WD25737B01
Replacement handle for PBDCT
DCT-BLD
Replacement blade kit with blade and nylon insert for DCT.
DCT-RI
Replacement nylon insert.
1
1
1
1
Duct Finger Cutting Tool (For use with all wide slotted duct types)
DFCT
Hand-held duct finger cutting tool
1
Duct Notching Tool (For use with all wide slotted duct types)
D.
Terminals
and
Reel
Smart™
System
DFCT
F.
Part
Number
Index
C.2
Hand-held sidewall notching tool
1
Nylon Rivet Installation Tool
TNR
Hand-held nylon rivet installation tool
1
Nylon Rivets
NR1-C
DNT-100
E.
Power
Connectors
and
Grounding
DNT-100
Nylon rivet for use with TNR rivet tool
Mean pull-off force PVC: 90 lbs. Type NE/Type NNC: 70 lbs
Mean shear force: PVC 139 lbs. Type NE/Type NNC: 126 lbs
Nylon rivet for use with TNR rivet tool
Mean pull-off force PVC: 90 lbs. Type NE/Type NNC: 70 lbs
Mean shear force: PVC 139 lbs. Type NE/Type NNC: 126 lbs
NR1-M
100
1000
Notes:
- Always use approved safety goggles when using any tools.
- If ordering PBDCT outside the U.S., these part numbers must both be ordered: PBDCT-B and PBDCT-M.
TNR
NR1
Total Thickness of Panel and Duct
Panel Hole Dia. Needed
In.
mm
In.
mm
ANSI
Standard
Drill Bit
0.158 – 0.187
4.0 – 4.7
0.187
4.7
#15
0.188 – 0.218
4.8 – 5.5
0.193
4.9
#11
0.219 – 0.250
5.6 – 6.4
0.203
5.2
#7
0.251 – 0.281
6.5 – 7.1
0.213
5.4
#4
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_C_WiringDuct_v1_TC.indd 2
7/25/16 7:43 AM
Terminals and Reel Smart™ System
Terminal Crimping Tools
Panduit ® offers a wide assortment of tools to provide solutions for installing
terminals, disconnects, splices, ferrules and lugs. Panduit installation tools
provide quality performance and ease of installation at the lowest installed cost.
The long-term reliability of Panduit installation tools provides the highest level
of service to meet customer requirements.
• Ergonomic design to minimize
operator effort
A.
Cable
Ties
B.
Stainless
Steel
• Features crimping tools with a controlled
cycle mechanism ensuring repeat reliability
in every crimp
• Superior locator ensures proper location of
the terminal barrel or insulated disconnect
in the crimp pocket
• Battery powered, hydraulic tools with
fingertip operation are available to meet a
variety of installation needs
C.
Wiring
Duct
• UL Listed and CSA Certified tooling/product
combinations, as noted
Panduit terminal crimping tools are available in an assortment of styles to
meet a variety of installation needs. The installer can control the crimp with
the plier type hand operated crimping tool. Hand operated Contour Crimp™
Controlled Cycle Crimping Tools feature ergonomically designed cushioned
grips with low handle effort. Panduit terminal crimping tools are designed
for use with Panduit terminals, providing the right solution for your
termination needs.
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 1
For service and technical support, call 800-777-3300.
D.1
7/25/16 7:43 AM
Tool Solutions
A.
Cable
Ties
Crimping Guidelines for Panduit ® Pan-Term ® Terminals, Disconnects, Splices
and Wire Joints
1. Select the proper Panduit terminal for the application and wire size used
• Ring terminals are used for high vibration and grounding applications
• Fork terminals are used for static (non-vibration) applications
• Disconnects are used for applications that require quick connection of wires without
the use of tools
• Splices and wire joints are used to join wires together
B.
Stainless
Steel
2. Strip wire to the proper length as specified on:
• Panduit product packaging label
• Packaging instructions included with the Panduit product
• Or if no packaging instructions are available, plan your strip length so that 1/32" of wire can be seen protruding through
the tongue end of the terminal barrel
3. Select the proper crimp tool to be used
• Use crimping tools that provide a UL Listed and/or CSA Certified electrical termination, to assure a safe and
reliable connection
C.
Wiring
Duct
• Panduit terminals are UL Listed and CSA Certified when crimped with Panduit plier type crimping tool or with the
preferred Contour Crimp™ Controlled Cycle Crimping Tool specified on the packaging label
Plier Type
Crimping Tool
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
4. Select the proper crimp pocket for the terminals and wire size you are using
• Panduit crimping tools simplify this process with color-coded crimp pockets. The yellow, blue, and red pockets are
specifically designed for the industry standard barrel sizes, each with a specific color code.
5. Perform the electrical crimp for the plier type tool
Insulated Terminals and Disconnects
A. Locate terminal in appropriate size color-coded crimp
die pocket with tool centered on insulation sleeve.
(See Note 1, page D.4)
B. Rotate terminal so tongue is level with crimp die.
C. Insert properly stripped wire into terminal until a minimum
of 1/32" of wire extends beyond the terminal barrel.
F.
Part
Number
Index
D.2
Contour Crimp™
Controlled Cycle
Crimping Tool
Step A
Step B
Steps C and D
D. Squeeze tool handles firmly to perform the electrical crimp.
(See Note 2, page D.4)
E. Provide second crimp on the flared portion of the insulation housing to
close the insulation as shown. Caution: When using plier type crimping
tools, do not squeeze as firmly as you did for the electrical crimp.
(See Note 3, page D.4)
Step E
Complete Crimp
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 2
7/25/16 7:43 AM
Terminals and Reel Smart™ System
Crimping Guidelines for Panduit ® Pan-Term ® Terminals, Disconnects, Splices
and Wire Joints (continued)
Non-Insulated Terminals and Disconnects
A.
Cable
Ties
A. Locate terminal in appropriate wire gauge crimp die
pocket with indenter centered on barrel seam.
B. Rotate terminal so tongue is level with crimp die.
C. Insert properly stripped wire (based on recommendations
on package label) into terminal until a minimum of 1/32" of
wire extends beyond the terminal barrel.
Step A
Step B
Steps C and D
D. Squeeze tool handles firmly to perform the electrical
crimp. (See Note 2, page D.4)
B.
Stainless
Steel
Complete Crimp
C.
Wiring
Duct
Insulated and Non-Insulated Parallel Splices
A. Locate parallel splice in appropriate wire gauge crimp die
pocket and position tool on the center of the splice.
B. Rotate terminal so tongue is level with crimp die.
C. Insert properly stripped wire (based on recommendations
on package label) into each end of the parallel splice.
D. Squeeze tool handles firmly. (See Note 2, page D.4)
Steps A and B
Steps C and D
Complete Crimp
E. An insulation crimp is not required on an insulated
parallel splice.
D.
Terminals
and
Reel
Smart™
System
Insulated and Non-Insulated Butt Splices
A. Locate butt splice in appropriate color-coded crimp die
pocket and position crimp halfway between the wire stop
(center of splice) and the end of the insulation crimp area.
(See Note 4, page D.4)
B. Insert properly stripped wire (based on recommendations
on package label) into one end of butt splice.
C. Squeeze tool handles firmly to perform the electrical crimp
(See Note 2, page D.4)
Steps A and B
Step C
Steps D and E
E.
Power
Connectors
and
Grounding
D. Provide second crimp on the flared portion of the insulation
housing to close the insulation. Caution: When using plier
type crimping tools, do not squeeze as firmly as you did for
the electrical crimp. (See Note 3, page D.4)
E. Repeat steps 1 – 4 for opposite end of butt splice.
(See Note 3, page D.4)
Complete Crimp
Continues on next page
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 3
For service and technical support, call 800-777-3300.
F.
Part
Number
Index
D.3
7/25/16 7:44 AM
Tool Solutions
A.
Cable
Ties
Crimping Guidelines for Panduit ® Pan-Term ® Terminals, Disconnects, Splices
and Wire Joints (continued)
Insulated and Non-Insulated Wire Joints
A. Properly strip wires per manufacturer’s recommendations
on product package label.
B. Twist stripped wire ends together and insert wires into
wire joint.
C. Locate wire joint in appropriate wire gauge crimp die
pocket and position crimp in the center of the metal insert.
B.
Stainless
Steel
Steps A and B
Steps C and D
Complete Crimp
D. Squeeze tool handles firmly to perform the electrical
crimp. (See Note 2 below)
Note: An insulation crimp is not required on an insulated
wire joint.
NOTES for Crimping with the Preferred Hand Operated Controlled Cycle Crimping Tools:
1. Panduit controlled cycle crimping tools properly locate rings, forks, and barrel insulated disconnects, pins, and blades.
No further positioning is required.
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
2. When using the preferred controlled cycle tool, once a crimp has been started, the ratchet device of controlled cycle
tools will not release until the crimp is complete, independent of operator expertise.
3. Controlled cycle tools provide the electrical crimp and the insulation closure in a single cycle of the tool.
4. When using controlled cycle tooling, insulated butt splices must be inserted from the back of the tool to ensure that the
electrical and insulation closure crimp pockets are properly aligned with the splice.
5. P
erform the electrical crimp using the preferred
controlled cycle tool
A. Make sure the terminal barrel is centered correctly in
the right die pocket by using the product locator on the
backside of the tool.
B. Determine the correct die pocket to use based on the
color code of the terminal.
C. Squeeze the handles of the tool until one click is heard;
this click indicates the terminal is now held in place
securely to insert the wire.
Step A
Step B
Step C
D. Insert the wire and complete cycle to perform the electrical
and insulation crimp simultaneously.
E.
Power
Connectors
and
Grounding
E. Crimp is complete.
Step D
Complete Crimp
6. Inspect the crimp
Note: If your crimp looks like any of the examples shown
below, cut off the terminal and re-crimp. These crimps
would provide a poor connection!
F.
Part
Number
Index
D.4
Bent Back
Strands
Over Crimp
Rotated Crimp
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 4
7/25/16 7:44 AM
Terminals and Reel Smart™ System
Hand Operated Plier Type Tools
●●Installer controlled crimp
●●Available with wire stripping and cutting features
Part Number
CT-260
CT-260
CT-200
CT-160
CT-100A
A.
Cable
Ties
●●Plier type crimp for #22 – 10 AWG insulated and
non-insulated terminal products
Part Description
Crimps most Panduit ® #22 – 10 AWG insulated and non-insulated terminals.
Forged steel tool. Cuts wire.
Forged steel tool. Crimps most Panduit #22 – 10 AWG non-insulated terminals,
disconnects and splices. Cuts wire.
Crimps most Panduit #22 – 10 AWG insulated and non-insulated terminals
disconnects and splices. Cuts three U.S. and three metric screw sizes. Cuts and
strips wire. Has insulation closure pocket.
Crimps most Panduit #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices. Cuts #4, #6, #8 and #10 screw sizes. Cuts and strips
wire. Excellent all-around application tool of heat treated finished steel with
comfortable cushioned plastic grip handles.
Std.
Pkg.
Qty.
1
1
1
1
B.
Stainless
Steel
CT-200
C.
Wiring
Duct
CT-160
CT-100A
D.
Terminals
and
Reel
Smart™
System
Wire and Cable Stripping Tools
●●Strips and cuts #20 – 10 AWG wire
●●Lightweight and durable for comfortable long use
Part Number
CST115
●●Rust resistant coating included to improve durability
of tool
Wide Range
(O.D.)
Part Description
#20 – 10 AWG Plier nose wire stripper.
Std.
Pkg.
Qty.
1
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 5
For service and technical support, call 800-777-3300.
D.5
7/25/16 7:44 AM
Tool Solutions
Contour Crimp™ Controlled Cycle Tools
A.
Cable
Ties
●●Controlled cycle mechanism assures high quality,
consistent terminations
●●Ergonomic tool design assures operator comfort, safety,
and performance
CT-1525
B.
Stainless
Steel
Part Number
CT-1525
CT-1550
CT-1550
CT-1551
CT-1551
CT-1570
CT-1700
C.
Wiring
Duct
CT-1570
CT-1700
D.
Terminals
and
Reel
Smart™
System
CT-1701
CT-1015
●●Polypropylene handles provide chemical resistance and a
cushioned, non-slip grip
Part Description
Crimps Panduit ® #26 – 22 AWG insulated terminals and splices, #22 – 10 AWG
fully insulated disconnects and insulated parallel splices. Crimps Panduit
#22 – 14 AWG barrel insulated disconnects.
Crimps most Pan-Term ® #22 – 10 AWG nylon and vinyl insulated terminals,
splices, and disconnects. The CT-1550 has the red/blue pocket closest
to the pivot which provides a reduced crimp effort for those who make
red/blue terminations.
Crimps most Pan-Term ® #22 – 10 AWG nylon and vinyl insulated terminals,
splices, and disconnects. The CT-1551 has the yellow pocket closest to the pivot
which provides a reduced crimp effort for those who make yellow terminations.
Crimps most Pan-Term ® #22 – 10 AWG and 0.5 – 6.0mm2 non-insulated
terminals and disconnects. Crimps Panduit #22 – 10 AWG and 0.5 – 6.0mm2
non-insulated splices and #10 AWG compression lugs.
Crimps Panduit #8 – 2 AWG non-insulated tubular terminals (S series),
#8 – 1 AWG copper code conductor lugs and splices, #8 – 2 AWG copper
flex conductor lugs, #6 – 4 AWG dual rated aluminum lugs and splices and
CTAPF10-16 to CTAPF3-12 copper taps. Includes 5-position, color coded
rotating die.
Crimps Panduit #10 – 2 AWG non-insulated large gauge ring terminals
(P series), #12 – 4 AWG non-insulated heavy duty ring terminals (P series), and
#14 – 10 AWG copper code conductor lugs. Includes 5-position, rotating die.
Crimps Panduit #22 – 14 AWG loose piece Supra-Grip™ Disconnects.
Std.
Pkg.
Qty.
1
1
1
1
1
1
1
CT-1701
CT-1015
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
D.6
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 6
7/25/16 7:44 AM
Terminals and Reel Smart™ System
Controlled Cycle Crimping Tools
●●Specialty crimping tools for fully insulated right angle
disconnects and heat shrink insulated terminals,
disconnects, and splices
Part Number
CT-300-1
CT-300-1
CT-310
A.
Cable
Ties
●●Controlled cycle mechanism assures high quality,
consistent terminations
Part Description
Crimps Panduit #22 – 14 AWG fully insulated right angle disconnects
(DNFR-FIB series).
Blue handle tool crimps Panduit #22 – 10 AWG heat shrink insulated terminals,
disconnects, and splices.
Std.
Pkg.
Qty.
1
1
B.
Stainless
Steel
Controlled Cycle Crimping Tools – Ferrule End Sleeve
●●Specifically designed for the installation of
Pan-Term ® Ferrules
●●Controlled cycle mechanism assures high quality,
consistent terminations
Part Number
CT-1002
CT-1002
CT-1003
CT-1004
CT-1003
CT-1005
CT-1006
CT-1104
CT-1004
CT-1123
●●Ergonomic tool design assures operator comfort, safety,
and performance
●●Multi-position locator facilitates a high quality
repeatable crimp
Part Description
Controlled cycle crimp tool with trapezoid profile for #26 – 10 AWG
(0.14 – 6.0mm2) insulated and non-insulated single wire ferrules and
#22 – 12 AWG (0.50 – 4.0mm2) insulated twin wire ferrules.
Controlled cycle crimp tool with trapezoid profile for #22 – 8 AWG
(0.50 –10.0mm2) insulated and non-insulated ferrules and #22 – 10 AWG
(0.50 – 6.0mm2) insulated twin wire ferrules.
Controlled cycle crimp tool with trapezoid profile for #8 – 6 AWG
(10.0 – 16.0mm2) insulated and non-insulated ferrules and #10 AWG (6.0mm2)
insulated twin wire ferrules.
Controlled cycle crimp tool with trapezoid profile for #4 – 2 AWG
(26.0 – 35.0mm2) insulated and non-insulated ferrules.
Controlled cycle crimp tool with trapezoid profile for #1 AWG (50.0mm2) insulated
and non-insulated ferrules.
Controlled cycle crimp tool with square profile for #8 – 6 AWG (10.0 – 16.0mm2)
insulated and non-insulated ferrules and #10 AWG (6.0mm2) insulated twin
wire ferrules.
Controlled cycle crimp tool with square profile for #26 – 8 AWG (0.14 – 10.0mm2)
insulated and non-insulated ferrules and #22 – 12 AWG (0.50 – 4.0mm2)
insulated twin wire ferrules.
Std.
Pkg.
Qty.
1
1
C.
Wiring
Duct
1
1
1
1
1
D.
Terminals
and
Reel
Smart™
System
CT-1005
E.
Power
Connectors
and
Grounding
CT-1006
CT-1104
F.
Part
Number
Index
CT-1123
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 7
For service and technical support, call 800-777-3300.
D.7
7/25/16 7:44 AM
Tool Solutions
Semiautomatic Ferrule Crimping Tool CT-1000
A.
Cable
Ties
●●Innovative rapid load design utilizes continuously molded
ferrules to significantly reduce installation time
●●Controlled cycle tool cuts, strips, and crimps wire to
maximize efficiency
Part Number
CT-1000
B.
Stainless
Steel
●●Adjustable die setting allows termination of all Panduit ®
#20 – 14 AWG continuously molded ferrules with a
single tool
Part Description
Controlled cycle crimp tool with trapezoid profile for #20 – 14 AWG
(0.50 – 2.5mm2) insulated continuously molded ferrules on strips. Also cuts
and strips wire.
Std.
Pkg.
Qty.
1
Controlled Cycle Crimping Tools – In-Line
●●Military specialty tools help meet military and nuclear test
requirements for Class 2 applications
●●In-line crimp action for greater dielectric strength with
uniform insulation compression
Part Number
CT-400
C.
Wiring
Duct
CT-460
●●Calibration-recalibration is possible for maintaining exact
crimp dimensions
Part Description
Crimps #22 – 14 Panduit insulated terminals, disconnects, and splices. Comes
complete with tools for calibration. Has adjustable pre-load and emergency
ratchet. Helps meet military and nuclear requirements.
Crimps #16 – 10 Panduit insulated terminals, disconnects, and splices. Has
same features as CT-400 above.
Std.
Pkg.
Qty.
1
1
For proper crimp head selection, see the tooling selection guide for Panduit terminals, splices, and disconnects on
pages D.13 – D.15, in this catalog.
D.
Terminals
and
Reel
Smart™
System
Pneumatic Crimping Tool
●●Quickly crimps a variety of loose piece terminals in a
variety of wire sizes for medium volume production
●●Versatile interchangeable crimping heads let you switch
terminal types quickly to meet changing production
requirements; this tool, when used with only four crimp
heads, can crimp a full range of #26 – 10 AWG insulated
and non-insulated terminal products
Part Number
CT-600-A
E.
Power
Connectors
and
Grounding
CT-500CH
CT-520CH
CT-550CH
CT-570CH
PD-600-A
FPC-600-A
K600-A
F.
Part
Number
Index
D.8
●●Portable – the small size, ease of bench mounting and
quick pneumatic connection allow the tool to be moved
from one work station to another or to the work itself
Part Description
Pneumatic tool, 6' air hose and carrying case. Does not include crimping heads
(ordered separately).
Crimping head for most #22 – 14 insulated terminals, splices, and disconnects.
Crimping head for most #22 – 14 insulated butted seam disconnects and
#26 – 22 insulated terminals.
Crimping head for most #22 – 10 insulated terminals and splices.
Crimping head for #22 – 10 non-insulated terminals, splices, and disconnects.
Positioning device (for bench mounting of CT-600-A).
Foot actuator operating air pressure: 80 – 100 psi 0.233 SCFM type of air:
lubricated. Recommend using Norgren (Brand) #FLR222-012-043008 filter
lubricator regulator.
Update kit for foot pedal control and positioning device to work with new
CT-600-A pneumatic crimping tool.
Std.
Pkg.
Qty.
1
1
1
1
1
1
1
1
For proper crimp head selection, see the tooling selection guide for Panduit terminals, splices, and disconnects on
pages D.13 – D.15, in this catalog.
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 8
7/25/16 7:44 AM
Terminals and Reel Smart™ System
Die Type, Manual, Crimping Tool
●●High quality, durable tool construction provides long
term dependability
●●Develops 6 tons of crimping force, crimps copper
compression lugs and splices up to 500 kcmil
Part Number
CT-720
A.
Cable
Ties
●●Provides UL Listed and CSA Certified connections
on Panduit ® copper and aluminum lugs, splices
insulated terminals
Part Description
Manual crimping tool for UL Listed or Recognized and CSA Certified
terminations of Panduit ® Pan-Lug™ copper compression lugs and splices for
#8 AWG – 500 kcmil copper code conductor and aluminum compression lugs
and splices for #6 AWG – 350 kcmil copper and aluminum code conductors.
Provides UL Listed terminations of Panduit ® Pan-Term ® #8 – 2 AWG vinyl
insulated terminals.
Std.
Pkg.
Qty.
1
B.
Stainless
Steel
Color-coded CD-720 crimping dies, carrying/storage case, and controlled cycle
mechanism must be purchased separately.
CC-720
C-720
Specifications:
Output: 6 tons
Weight: 7.7 lbs.
Length: 26"
Handle span: 58" (open), 2.5" (closed)
Warranty: 90 days
Optional controlled cycle mechanism only. Total weight of tool with CC-720
is 8.25 lbs.
Black steel carrying case for CT-720 crimping tool.
1
1
For battery powered crimping tools, see compression connector tools selection guide on pages E.3 – E.5.
C.
Wiring
Duct
CD-720 Crimping Dies
●●Color-coded for easy matching to color-coding marked
on connectors
●●Embosses die index number on connector barrels to
provide post crimp inspection except CD-720PV8-2
Part Number
CD-720-1
CD-720PV8-2
CD-720-2
CD-720-3
CD-720-4
CD-720-5
CD-720-6
CD-720-7
CD-720PV8-2
●●Part number permanently marked on crimping die for
easy identification
●●Provides 5-sided crimp results in terminations with
premium electrical and mechanical performance
Used to Install Panduit Compression Lug and Splice Sizes
Copper
Aluminum
Copper Conductor
Die Color and
Aluminum
Die Color and
Size
Die No.
Conductor Size
Die No.
#6 AWG
Gray P29
#8 – 2 AWG
Red P21
Blue P24
Gray P29
Brown P33
#4 – 1/0 AWG
Green P37
#1 – 3/0 AWG
Green P37
Pink P42
Pink P42
Gold P45
Black P45
Tan P50
Orange P50
4/0 AWG – 250 kcmil
Purple P54
2/0 – 3/0 AWG
Olive P54
Ruby P62
Yellow P62
300 kcmil
White P66
4/0 AWG
White P66
350 kcmil
Red P71
250 kcmil
Red P71
400 kcmil
Blue P76
300 kcmil
Blue P76
500 kcmil
Brown P87
350 kcmil
Brown P87
#8 – 2 AWG,
Red, Blue, Yellow
—
—
Vinyl Insulated
Pan-Term ® Terminals
Std.
Pkg.
Qty.
1
1
1
1
1
1
1
1
See pages E.3 – E.5 for connector and tool selection information.
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 9
For service and technical support, call 800-777-3300.
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
D.9
7/25/16 7:44 AM
Tool Solutions
CT-2500/L Battery Powered Crimping Tool
A.
Cable
Ties
●●Quick 2-4 second crimping cycle, depending on the crosssection, results in less time to crimp terminals compared
to conventional methods
●●Lightweight 2.81 lb. (1.28)Kg design provides
maximum productivity and ease of use in continuous
workflow operations
●●Interchangeable crimp heads for termination of all Panduit
#22 – 10 AWG terminals, disconnects, and splices
●●Crimping force 1.5 Tons (15kN)
B.
Stainless
Steel
●●High-performance 10.8 Volt 1.5Ah Lithium-ion battery with
high capacity and extremely short charging time ~30 min.
Std.
Pkg.
Qty.
Crimps Panduit #22 – 10 AWG insulated terminals, disconnects,
and splices.
Crimps Panduit #22 – 10 AWG fully insulated disconnects and insulated
parallel splices.
Crimps Panduit #22 – 10 AWG non-insulated terminals, disconnects,
and splices.
Blank Crimp Head for use with CD-525, CD-550 and CD-570 Die Inserts.
1
Crimp Head Frames
CT-2500CH
Die Inserts For Use With CT-2500CH Crimp Head Frame
CD-525
CD-550
CD-570
Accessories
CT-2500BC
●●CE and RoHS compliant
1
CT-2570CH
E.
Power
Connectors
and
Grounding
●●Multifunction LED for maintenance display and data
transfer via USB adapter
Crimps Panduit #22 – 10 AWG insulated and non-insulated Terminals,
disconnects, and splices. Includes tool, two battery cartridges (CT-2500/
LBC) battery charger (CT-2500/LCHR) and molded carrying case. Crimp
heads not included. Meets U.S. Voltage requirements.
Crimps Panduit #22 – 10 AWG insulated and non-insulated Terminals,
disconnects, and splices. Includes tool, two battery cartridges (CT-2500/
LBC) battery charger (CT-2500/LECHR) and molded carrying case. Crimp
heads not included. Meets European voltage requirements.
CT-2525CH
CT-2550CH
●●LED for workplace illumination
CT-2500/L
CT-2550CH
D.
Terminals
and
Reel
Smart™
System
●●Functional evaluation using optical interface
and USB-Adapter
Part Description
CT-2500/LE
CT-2500/L
●●Integrated pressure measurement with visual and
audible signals
Part Number
Crimp Tools
C.
Wiring
Duct
●●Electronic controlled and monitoring of operation
CT-2500/LCHR
CT-2500/LECHR
CT-2500/LBC
1
1
1
1
Die insert used with CT-2500CH (sold separately) to crimp Panduit
#22 – 10 AWG fully insulated disconnects and insulated parallel splices.
Die insert used with CT-2500CH (sold separately) to crimp Panduit
#22 – 10 AWG insulated terminals, disconnects, and splices.
Die insert used with CT-2500CH (sold separately) to crimp Panduit
#22 – 10 AWG non-insulated terminals, disconnects, and splices.
1
U.S. compatible battery charger for use with the CT-2500/L.
European compatible battery charger for use with the CT-2500/LE.
Rechargeable tool battery for use with the CT-2500/L.
1
1
1
1
1
F.
Part
Number
Index
D.10
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 10
7/25/16 7:44 AM
Terminals and Reel Smart™ System
CT-2600/L Battery Powered Hydraulic, 4 Ton, Crimping Tool
●●Battery powered hydraulic design delivers quick
termination of #8 – 2 AWG large wire insulated and
non-insulated ring terminals
●●Quick 3-4 second crimping cycle, depending on the
cross-section, results in less time to crimp terminals
compared to conventional methods
●●Compact, portable, and lightweight 5.5 lb. (2.5)Kg design
provides maximum productivity and ease of use in
continuous workflow operations
●●Ram retracts automatically to signal crimp is complete
●●Retractable slide button allows ram to retract in mid-cycle
for manual adjustment of terminals
●●Snap in crimp die provides quick change of Panduit
interchangeable crimp dies without the use of tools
●●Crimping force 4.0 Tons (35kN)
●●High-performance 18 Volt 2.0Ah Lithium-ion battery with
high capacity and extremely short charging time ~15 min.
A.
Cable
Ties
●●Electronic controlled and monitoring of operation
●●Integrated pressure measurement with visual and
audible signals
●●Functional evaluation using optical interface and
USB-Adapter
●●One-button operation controls all tooling functions
●●LED for workplace illumination
B.
Stainless
Steel
●●Multifunction LED for maintenance display and data
transfer via USB adapter
●●CE and RoHS compliant
●●Slim 360° rotations crimp head design allows use in
limited space areas
Std.
Pkg.
Qty.
Part Number
Part Description
CT-2600/L
Crimps Panduit ® tin and nickel plated #8 – 2 AWG high temperature large
wire, non-insulated, vinyl and KYNAR** insulated ring terminals.
Specifications: Crimping force – 4 tons (35kN)
Dimensions: 13.15"L x 2.36"H x 2.95"W –
with battery (334mm x 60mm x 75mm)
Weight 3.5 lbs. with battery; crimp head not included
Crimp cycle time = 3-4 seconds depending on cross-section
CT-2600/L includes: Tool with crimp head, two battery cartridges, battery
charger and molded carrying case. Crimp dies not included. Crimp die part
number listed below. Meets U.S. voltage requirements.
Crimps Panduit tin and nickel plated #8 – 2 AWG high temperature large
wire, non-insulated, vinyl and KYNAR insulated ring terminals.
Specifications: Crimping force – 4 tons (35kN)
Dimensions: 13.15"L x 2.36"H x 2.95"W –
with battery (334mm x 60mm x 75mm)
Weight 3.5 lbs. with battery; crimp head not included
Crimp cycle time = 3-4 seconds depending on cross-section
CT-2600/LINT includes: Tool with crimp head, two battery cartridges,
battery charger and molded carrying case. Crimp dies not included. Crimp
die part number listed below. Meets European voltage requirements.
1
Used with CT-2600/L and CT-2600/LINT to install Panduit P8 and P8-HT6
series large wire, high temperature, non-insulated ring terminals.
Used with CT-2600/L and CT-2600/LINT to install Panduit P6 and P6-HT6
series large wire, high temperature, non-insulated ring terminals.
Used with CT-2600/L and CT-2600/LINT to install Panduit P4 and P4-HT6
series large wire, high temperature, non-insulated ring terminals.
Used with CT-2600/L and CT-2600/LINT to install Panduit P2 and P2-HT6
series large wire, high temperature, non-insulated ring terminals.
Used with CT-2600/L and CT-2600/LINT to install Panduit PV8 and PK8
series large wire, vinyl and KYNAR** insulated ring terminals.
Used with CT-2600/L and CT-2600/LINT to install Panduit PV6 and PK6
series large wire, vinyl and KYNAR** insulated ring terminals.
Used with CT-2600/L and CT-2600/LINT to install Panduit PV4 and PK4
series large wire, vinyl and KYNAR** insulated ring terminals.
Used with CT-2600/L and CT-2600/LINT to install Panduit PV2 and PK2
series large wire, vinyl and KYNAR** insulated ring terminals.
1
Crimping Tools
CT-2600/L
CT-2600/LINT
Crimp Die Inserts
CD-2600-P8
CD-2600-P6
CD-2600-P4
CT-2600/LBC
CD-2600-P2
CD-2600-PV8
CD-2600-PV6
CD-2600-PV4
CD-2600-PV2
Accessories
U.S. compatible battery charger for use with the CT-2600/L.
CT-2600/LCHR
CT-2600/LINTCHR European compatible battery charger for use with the CT-2600/LINT.
Rechargeable tool battery for use with the CT-2600/L.
CT-2600/LBC
CT-2600/LINTBC Rechargeable tool battery for use with the CT-2600/LINT.
** KYNAR is a registered trademark of Atofina Chemicals, Inc.
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 11
1
1
1
1
1
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
1
1
1
1
1
1
1
For service and technical support, call 800-777-3300.
F.
Part
Number
Index
D.11
7/25/16 7:44 AM
Tool Solutions
Large Ferrule Crimping Dies
A.
Cable
Ties
Large ferrule crimping dies are designed to snap into the battery powered CT-3001 or CT-3001/E crimping tool to install
ferrules onto the stripped ends of #1 AWG to 500 kcmil flexible cables – Classes DLO,H,I,K and M.
●●Interchangeble dies allows the use of one power tool for
multiple wire sizes
●●Snap in mounting delivers less than a 20 second
exchange of die sets: no tools neede for additional
labor savings
●●Dies are made of chrome plated steel to insure up to
50,000 cycles and protection against corrosion
B.
Stainless
Steel
●●Impressed die index number provides a quick post
crimp inspection of ferrule for superior performance and
quality assurance
Part Number
CD-2001-F87
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
CT-3001
CD-2001-F89
CD-2001-F90
CD-2001-F91
CD-2001-F92
CD-2001-F93
CD-2001-F94
●●2.9 second cycle time, 26% faster than most comparable
tools to deliver quick and quality terminations
●●Designed to minimize the profile of the crimped end of
wire to assist feeding into the connector wire entries
●●Die sets for #1 AWG to 500 kcmil
●●6-ton tool frame of CT-3001 provides sufficient
compression of ferrules during crimping to prevent wire
pull out and deliver a secure connection
Used with Tool*
CT-3001
CT-3001
CT-3001
CT-3001
CT-3001
CT-3001
CT-3001
Wire Size (AWG)
1 AWG – 1/0
2/0
3/0
4/0 – 250 kcmil
300 kcmil
350 kcmil
400 – 500 kcmil
Wire Size (mm2)
50.0
70.0
95.0
120.0
150.0
185.0
240.0
Ferrule Series
F87, FSD87
F89, FSD89
F90, FSD90
F91, FSD91
F92, FSD92
F93
F94
*Also compatible with the CT-2001 and CT-3001/E
CD-2001 F-Series
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
D.12
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 12
7/25/16 7:44 AM
Terminals and Reel Smart™ System
Tooling Selection Guide for Panduit ® Terminals, Splices, and Disconnects
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
C.
Wiring
Duct
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D.
Terminals
and
Reel
Smart™
System
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
Continues on next page
2016_IEI_D_Terminals_TC_v2.indd 13
B.
Stainless
Steel
X
Tool/product approved combinations indicated on individual product pages.
www.panduit.com
A.
Cable
Ties
CT-570CH
CT-550CH
CT-520CH
CT-500CH
CT-2500/L
X
X
X
X
CT-2600/L
CT-1701
X
X
X
X
X
X
CT-1570
X
X
X
X
X
X
X
X
CT-1551
X
X
CT-1550
X
X
CT-1525
X
X
X
CT-1015
X
X
X
X
X
CT-460
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
CT-400
X
X
X
CT-310
X
X
X
CT-300-1
CT-260
X
X
X
X
Controlled Cycle Hand Tools
CT-720
CT-200
CT-100A
Std.
Wire
Wire
Strip
Terminal
Range Length
Description
(AWG) (In.)
Non-insulated
26-22
1/4
X
butt splices
22-18
9/32
X
16-14
9/32
X
12-10
9/32
X
BSH
Heat shrink splices
22-18
5/16
16-14
5/16
12-10
5/16
26-22
1/4
X
BSN
Nylon insulated
butt splices
22-18
9/32
X
16-14
9/32
X
12-10
9/32
X
22-18
5/16
X
BSV
Vinyl insulated
butt splices
16-14
5/16
X
12-10
5/16
X
9/32
X
Non-insulated sleeved 22-18
D,
barrel disconnects
DR
16-14
9/32
X
(includes right
12-10
9/32
X
angle disconnects)
D-M
Non-insulated male
22-18
9/32
X
blade adapters
16-14
9/32
X
D-M
Non-insulated
12-10
9/32
X
male disconnects
22-18
9/32
X
Non-insulated
D-MB,
right angle female
DR-B
16-14
9/32
X
disconnects and noninsulated male butted
seam disconnects
DNF
Nylon, funnel entry,
22-18
9/32
barrel insulated
16-14
9/32
disconnects
(not 0.110/0.111)
DNF-110,
22-18
7/32
X
Nylon, funnel entry
barrel insulated
DNF-111
16-14
9/32
disconnects, 110/.111
tab size
DNF-FI
Nylon, fully
22-18
9/32
X
insulated disconnects 16-14
9/32
X
3/8
X
12-10
DPF-FI
Premium nylon, fully
12-10
3/8
X
insulated disconnects
22-18
9/32
X
Nylon and premium
DNF-FIB,
DNF-FIM, grade nylon, fully
16-14
9/32
X
DNF-FIMB, insulated, funnel
12-10
3/8
entry, male/female
DPF-FIB,
DPF-FIMB couplers (not
0.110/0.111)
22-18
7/32
X
DNF-FIB,
Nylon and premium
grade nylon, fully
DPF-FIB
insulated, funnel
entry disconnects
0.110/0.111 tab size
DNF-FIBX Nylon, expanded wire 22-18
9/32
X
entry fully insulated
16-14
9/32
X
Panduit
Terminal
Series
BS
CT-160
Plier Tools
Crimp Heads
for Pneumatic
CT-600-A Tool
For service and technical support, call 800-777-3300.
D.13
7/25/16 7:44 AM
Tool Solutions
Tooling Selection Guide for Panduit ® Terminals, Splices, and Disconnects (continued)
B.
Stainless
Steel
DNFR-B
DNFR-FIB
DNG-FB
DNH
C.
Wiring
Duct
DV
DV-B
D.
Terminals
and
Reel
Smart™
System
Vinyl barrel insulated
male blade adapters
DV-M
Vinyl insulated
male disconnects
Vinyl insulated
butted seam
male disconnects
Vinyl insulated
piggyback
disconnects
Vinyl funnel entry
barrel insulated
female disconnect
Non-insulated
wire joints
J214-312
DV-MB
DV-P
DVF
JN
P-HDR
P-P
F.
Part
Number
Index
Vinyl barrel insulated
sleeved disconnects
Vinyl insulated, butted
seam disconnects
DV-M
J
E.
Power
Connectors
and
Grounding
P-R
J318-412
J216-410
Nylon insulated
wire joints
JN224-318
JN218-216
JN418-212
JN314-412
Non-insulated heavy
duty rings
Non-insulated
pin terminals
Non-insulated large
ring terminals
22-18
11/32
22-18
1/4
22-18
16-14
12-10
12-10
5/16
5/16
5/16
9/32
X
22-18
16-14
22-18
16-14
12-10
1/4
1/4
9/32
9/32
9/32
X
X
X
X
X
22-18
9/32
X
22-18
1/4
X
16-14
16-14
16-14
16-14
16-14
22-18
9/32
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
CT-570CH
CT-550CH
CT-520CH
CT-500CH
CT-2600/L
CT-2500/L
CT-1701
X
X
X
CT-1570
X
X
X
X
X
X
X
X
X
X
1/4
1/4
CT-1525
X
X
X
11/32
9/32
CT-1015
CT-460
CT-310
CT-300-1
CT-720
CT-260
X
CT-1551
9/32
9/32
9/32
Crimp Heads
for Pneumatic
CT-600-A Tool
Controlled Cycle Hand Tools
CT-1550
16-14
12-10
22-18
CT-200
Terminal
Description
Nylon insulated,
funnel entry,
barrel insulated,
male disconnects
Nylon pre-insulated,
right angle
disconnects
Nylon butted
seam, right angle
disconnects
Supra Grip™ Nylon,
Fully Insulated
Disconnects (except
DNG14-187FB and
DNG14-188FB)
Heat shrink
disconnects
Std.
Wire
Wire
Strip
Range Length
(AWG) (In.)
22-18
9/32
X
CT-100A
Panduit
Terminal
Series
DNF-M
CT-160
Plier Tools
CT-400
A.
Cable
Ties
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
9/32
16-14
9/32
14-12
18-12
16-10
1/2
1/2
3/4
X
X
24-16
22-16
18-12
14-12
16-12
7/16
7/16
1/2
5/8
9/32
X
X
X
22-18
16-14
12-10
8
6
4
2
9/32
9/32
9/32
3/8
7/16
1/2
1/2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Tool/product approved combinations indicated on individual product pages.
D.14
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 14
7/25/16 7:44 AM
Terminals and Reel Smart™ System
Tooling Selection Guide for Panduit ® Terminals, Splices, and Disconnects (continued)
■ KYNAR is a registered trademark of Atonfina Chemicals, Inc.
‡Use Die CD-720PV8-2.
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 15
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X‡
X‡
X‡
X‡
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D.
Terminals
and
Reel
Smart™
System
X
X
X
X
X
X
X
X
X
X
X
B.
Stainless
Steel
C.
Wiring
Duct
X
X
X
X
X
X
A.
Cable
Ties
CT-570CH
CT-550CH
CT-520CH
CT-500CH
CT-2600/L
CT-2500/L
CT-1701
CT-1570
CT-1551
CT-1550
CT-1525
X
X
X
X
X
X
X
X
X
X
X
X
CT-1015
CT-460
CT-400
X
X
X
X
X
X
X
CT-310
X
X
X
X
X
X
X
CT-300-1
CT-260
X
X
X
X
X
X
Controlled Cycle Hand Tools
CT-720
CT-200
CT-100A
Std.
Wire
Wire Strip
Terminal
Range Length
Description
(AWG) (In.)
26-22 3/16 X
Non-insulated rings,
forks, locking forks,
22-18 9/32 X
flanged forks
16-14 9/32 X
12-10 9/32 X
P-RHT6
High temperature
22-18 9/32 X
rings
16-14 9/32 X
12-10 9/32 X
8
3/8
6
7/16
4
1/2
2
1/2
PH
Heat shrink terminals 22-18 5/16
16-14 5/16
12-10 5/16
26-22 3/16 X
PN-R, PN-RX, Nylon and nylon
PN-F, PN-LF, funnel entry forks,
22-18 7/32 X
PN-FF, PNF-R, locking forks, flanged
16-14 7/32 X
forks (includes
PNF-F,
expanded insulation) 12-10 9/32 X
PNF-LF
16-12 9/32
PN-HDR,
Nylon insulated
heavy duty and nylon
PN-HDRX
expanded insulated
heavy duty rings
PS
Non-insulated
22-18 5/16 X
parallel splices
20-16 5/16 X
14-12 7/16 X
PSN
Nylon insulated
22-18 5/16
parallel splices
20-16 5/16 X
14-12 7/16
PK-R
22-18 7/32 X
KYNAR ■ rings
16-14 7/32 X
12-10 9/32 X
8
3/8
6
7/16
4
1/2
2
1/2
PV-HDR,
Vinyl insulated heavy 16-12 5/16
duty rings
PV-HDRX
PV-LF,
Vinyl insulated locking 22-18 5/16 X
forks (includes
PV-LFX
16-14 5/16 X
expanded insulation)
12-10 5/16 X
PV-P
Vinyl insulated
22-18 5/16 X
pin terminals
16-14 5/16 X
12-10 5/16 X
26-22 3/16 X
PV-R, PV-F,
Vinyl insulated rings
PV-FF, PV-RX, and forks (includes
22-18 5/16 X
expanded insulation)
PV-FX
16-14 5/16 X
12-10 5/16 X
PV-R, PV-RX Vinyl insulated large
8
3/8
ring terminals
6
7/16
4
1/2
2
1/2
Panduit
Terminal
Series
P-R, P-F,
P-LF, P-FF
CT-160
Plier Tools
Crimp Heads
for Pneumatic
CT-600-A Tool
X
X
X
X
X
X
X
X
X
X
For service and technical support, call 800-777-3300.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
D.15
7/25/16 7:44 AM
Tool Solutions
Semiautomatic Ferrule Crimping Tool – CT-1000
A.
Cable
Ties
●●Innovative rapid load design utilizes continuously molded
ferrules to significantly reduce installation time
●●Controlled cycle tool cuts, strips, and crimps wire to
maximize efficiency
Part Number
CT-1000
B.
Stainless
Steel
Part Description
Controlled cycle crimp tool with trapezoid profile for #20 – 14 AWG
(0.50 – 2.5mm²) insulated continuously molded ferrules on strips. Also
cuts and strips wire.
Std.
Pkg.
Qty.
1
Semi-Automatic Ferrule Installer - CP-881
●●The automated microprocessor feature provides a quick
three step process (wire stripping, ferrule placement,
and ferrule crimping) to reduce the average manual
processing cycle time from 8 – 10 seconds to 1.5 seconds
C.
Wiring
Duct
●●Adjustable die setting allows termination of all Panduit
#20 – 14 AWG continuously molded ferrules with a
single tool
●●For use with Panduit ® continuously molded #20 – 14
AWG (0.5 – 2.5mm2) DIN ferrules on reels of 1500 –
3000 or mini-reels of 500 – 1000 pieces to deliver a
superior solution for quality, high volume terminations.
●●Digital LCD cycle counter display with reset button for
batch quantity counting improves accuracy and efficiency
●●Color coded die inserts allow visual matching between
parts and die sets for fast efficient change over and
reduced mismatching
●●Lightweight with built-in handle for easy movement of
tool from workstation to workstation for maximum jobsite
flexibility and productivity
CP-881
A semi-automated tool that provides a quick three step process (wire stripping,
ferrule placement, and ferrule crimping) with a cycle time of 1.5 seconds. This
tool is used with Panduit continuously molded #20 – 14 AWG (0.5 – 2.5mm2)
DIN ferrules on mini-reels of 500 – 3000 pieces for quality, medium to high
volume terminations. Included with the tool are color coded die inserts that allow
visual matching between parts and die sets for fast efficient change over and
reduced mismatching. The CP-881 tool is lightweight and has a built-in handle
for easy movement of tool from workstation to workstation for maximum jobsite
flexibility and productivity.
D.
Terminals
and
Reel
Smart™
System
CP-881/E
A semi-automated tool that provides a quick three step process (wire stripping,
ferrule placement, and ferrule crimping) with a cycle time of 1.5 seconds. This
tool is used with Panduit continuously molded #20 – 14 AWG (0.5 – 2.5mm2)
DIN ferrules on mini-reels of 500 – 3000 pieces for quality, medium to high
volume terminations. Included with the tool are color coded die inserts that allow
visual matching between parts and die sets for fast efficient change over and
reduced mismatching. The CP-881 tool is lightweight and has a built-in handle
for easy movement of tool from workstation to workstation for maximum jobsite
flexibility and productivity.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
D.16
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 16
7/25/16 7:44 AM
Terminals and Reel Smart™ System
Reel Smart™ Ferrule Applicator – SCA-712022002 (CA10)
●●Designed for use with continuously molded ferrules in
reels of 1,500 - 3,000 for high volume applications
●●Precision ferrule indexing through applicator for optimum
reliability and productivity
Part Number
SCA-712022002
(CA10)
SCA-712022005WE
(CD10-1)
SCA-712022006WE
(CD10-2)
SCA-712022007WE
(CD10-3)
●●Universal base plate allows compatibility with the
UC 200 (CP-871) electric press, and other commercially
available bench presses and automatic wire processing
(AWP) machines
●●Quick change die sets terminate the entire ferrule line to
provide fast product change over and reduction in setup
time; dies sold separately
Part Description
Applicator used to terminates entire line of Reel Smart™ Continuously
Molded Ferrules on reels. For use with UC 200 (CP-871) Electric Press
and SCA (CD10) series die sets.
Die insert to be used with the CA10 applicator to terminate FS75,
FSD75, FS76 and FSD76 Reel Smart™ Continuously Molded Ferrules.
Std.
Pkg.
Qty.
1
1
Die insert to be used with the CA10 applicator to terminate FS80 and
FSD80 Reel Smart™ Continuously Molded Ferrules.
1
CA9 Ezair™ and CA-800EZ Applicators
●●Precision terminal indexing through applicator for optimum
reliability and productivity
Part Number
CA-800EZ*
CA9
B.
Stainless
Steel
1
Die insert to be used with the CA10 applicator to terminate FS77,
FSD77, FS78 and FSD78 Reel Smart™ Continuously Molded Ferrules.
●●Designed to terminated all continuously molded terminals,
disconnects, and splices in reels of 5,000 for high
volume applications
A.
Cable
Ties
●●Universal base plate allows compatibility with the
UC 200 (CP-871) electric press, and other commercially
available bench presses and automatic wire processing
(AWP) machines
C.
Wiring
Duct
●●Quick change die sets allow for fast product change over
and reduction in setup time; dies sold separately
Part Description
Applicator: runs in the AMP* Model T and K bench presses. True “quick
change” applicator — no additional plates are necessary. Slide right into
the press for easy changeover. Uses CD-800 series die inserts.
CA9 Ezair™ Applicator: terminates the entire Reel Smart™ product
line. This greatly reduces set up and maintenance time and increases
productivity. This patented applicator is so smart it automatically adjusts
feed stroke to the correct pitch and length for the entire product line.
Crimp die changeover in less than 1 minute, minimizes downtime and
increases productivity. Fast, easy loading of terminal parts without
special instructions or setup personnel. Simply feed the parts strip into
the applicator. All the necessary adjustments are made by the dies and
the automatic feed stroke.
Used in UC 200 (CP-871) electric press.
Safety lockout guard ensures operator safety.
Positive stop adjustment rings allow for electrical and insulation crimp
adjustments as desired.
Std.
Pkg.
Qty.
1
1
*AMP is a registered trademark of Tyco Electronics.
For crimp die information, refer to pages D.19 and D.20.
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 17
For service and technical support, call 800-777-3300.
D.17
7/25/16 7:44 AM
Tool Solutions
Electric Bench Press
A.
Cable
Ties
●●For use with Panduit ® Applicators and Reel Smart™
Continuously Molded Terminals and Ferrules to provide a
superior solution for quality, high volume terminations
●●UC 200 (CP-871) press has a microprocessor based
controller and LCD that displays text messages and cycle
count with multi-language capability
Part Number
UC 200
(CP-871)
B.
Stainless
Steel
●●Tool crimp height adjustment feature allows user to
easily set and maintain desired crimp height for
consistent performance
●●Applicator can be changed without the use of tools to
facilitate faster changeover for lower cost of ownership
Part Description
Electric press:
4000+ terminations per hour.
Operates on 110 VAC current/60 Hz, 220 VAC current/50 Hz
(field convertible).
Overall size (without reel): 13" x 33" x 16".
Total weight (without reel): 176 lbs.
Includes foot pedal.
Std.
Pkg.
Qty.
1
Die Sharpening Kits
C.
Wiring
Duct
●●Used to resharpen cutting edges and maintain reliability of CD-800 and CD9 series cutter dies
Part Number
DSF-RS
Part Description
For use with black oxide cutter dies.
DSF-NP
For use with nickel-plated cutter dies.
Std.
Pkg.
Qty.
1
1
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
D.18
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 18
7/25/16 7:44 AM
Terminals and Reel Smart™ System
Die Information
Part Number
TD13483C03
(CD-800C-1)
(CD-800-1D***)
TD13486C03
(CD-800C-2)
(CD-800-2D***)
TD13489C03
(CD-800C-3)
Color
Code
AWG
Wire
Range
Red
22 – 18,
22 – 16
Blue
16 – 14,
18 – 14
22–18
16 – 14
(1) Wire Insulation
Strain Relief
Plastic Ins. Crimp,
Insulation Support,
Metal Ins. Crimp,
Plastic Ins. Crimp
Plastic Ins. Crimp,
Insulation Support,
Metal Ins. Crimp,
Plastic Ins. Crimp
Plastic Ins. Crimp,
Plastic Ins. Crimp,
Metal Ins. Crimp,
Plastic Ins. Crimp,
Metal Ins. Crimp
Part No. Prefix
60/40
Solder Slug
Diameter
In.
mm
PV, DV-MB, DV-B,
BSN, PN, PNF,
DNF-M, BSP
(Premium Nylon)
PV, DV-MB, DV-B,
BSN, PN, PNF,
DNF-M, BSP
(Premium Nylon)
PV, PV12, DV,
DV-C, PN12, PV12,
DV-M, PN, PNF,
DNF-M
Crimp Die
Spare Part Number
Cutter Die
Lower Die
TD13471C06
CD-800-1
TD13483C03
CD-800 C-1
TD17755B01
CD-1
TD13473C05
CD-800-2
TD13486C03
CD-800C-2
TD17756B01
C-2
TD13475C06
CD-800-3
TD13489C03
CD-800C-3
TD17757B01
C-3
TD13833C06
CD-800-4, 10
TD13505C03
CD-800
C-4
TD13508C03
CD-800
C-5
TD13499C03
CD-800C-6
TD13492C04
CD-800
C-7
TD13502C04
CD-800
C-8
TD13495C03
CD-800
C-9
TD16233C03
CD-800
C-10
TD16243C02
CD-800
C-11
TD16235C03
CD-800
C-12
TD19115C03
CD-800
C-13
TD22944C02
CD-800
C-14
TD22946C02
CD-800
C-15
TD22948C02
CD-800
C-16
TD23600C01
CD-800-17
TD17758B01
C-4, 10
Yellow
12 – 10,
14 – 10,
16 – 12
TD13505C03
CD-800C-4
Red
12 – 18
Insulation Support
TD13508C03
CD-800C-5
Blue
16 – 14
Insulation Support
TD13499C03
CD-800C-6
Red
22 – 18
Insulation Support
TD13492C04
CD-800C-7
Red
22 – 18
Insulation Support
TD13502C04
CD-800C-8
Red/
Blue
22 – 18,
16 – 14
Insulation Support
TD13495C03
CD-800C-9
Red/
Blue
22 – 14
Insulation Support
DNFR-FIB
TD16233C03
CD-800C-10
Red
22 – 18
DiscoGrip™ Insulation
Crimp
TD16243C02
CD-800C-11
4.78
16 – 14
DiscoGrip™ Insulation
Crimp
0.188
Blue
TD16235C03
CD-800C-12
DPF-FIB, DPF-FIM,
DPF-FIMB,
DPF-LPB
DPF-FIM,
DPF-FIMB,
DPF-FIB, DPF-LPB
Red
22 – 18
DiscoGrip™ Insulation
Crimp
DPF-110FIB,
DPF-111FIB
0.125
3.18
TD13477C05
CD-800-7, 12
TD19115C03
CD-800C-13
Yellow
12 – 10
DNF-FIB, DPF-FIB
0.188
4.78
TD19116C03
CD-800-13
TD22944C02
CD-800C-14
Insulation Support,
DiscoGrip™ Insulation
Crimp
Red/
Blue
22 – 18,
16 – 14
Metal Insulation
Crimp
DNG-FL
0.125
3.18
TD22943C01
CD-800-14
TD22946C02
CD-800C-15
Red
22 – 18
Metal Insulation
Crimp
DNG-FB
TD22948C02
CD-800C-16
Blue
16 – 14
Metal Insulation
Crimp
DNG-FB
TD23600C01
CD-800-17
Yellow
12 – 10
Insulation Support
BSN
Yellow
12 – 10
Plastic Insulation
Crimp
DNF-FIMB
TD23773C01
CD-800-18
0.188
4.78
DNF-FIB, DNF-FIM,
DNF-FIMB,
DNF-LPB
DNF-FIB, DNF-FIM,
DNF-FIMB,
DNF-LPB
TD13634C05
CD-800-5, 11
TD13652C04
CD-800-6
DNF-FIBX
DNF-110FIB,
DNF-111FIB,
DNF-112FIB
DNF-FIBX,
DNF-FIMX,
DNF-FIMX
0.125
3.18
TD13477C05
CD-800-7, 12
0.188
4.78
TD13481C06
CD-800-8
0.125
3.18
TD13479C05
CD-800-9
TD13633C06
CD-800-4, 10
TD13634C05
CD-800-5, 10
TD22945C01
CD-800-15
0.188
4.78
TD22947C01
CD-800-16
TD23601C01
CD-800-17
TD13475C06
CD-800-18
TD23773C01
CD-800-18
TA13721A01 = 60/40 Solder Slug with 1/8" (0.125) outer diameter.
TA13722A01 = 60/40 Solder Slug with 3/16" (0.188) outer diameter.
(1) Insulation Support: Minimum wire insulation strain relief for normal applications.
Plastic and DiscoGrip™ Insulation Crimp: Secondary wire insulation strain relief for high vibration or conductor strain applications.
Metal Insulation Grip: Maximum wire insulation strain relief for high vibration or conductor strain applications.
***Modified lower die for barrel insulated disconnects DV-B series. Available as a complete die set or just lower die assembly.
A.
Cable
Ties
B.
Stainless
Steel
TD17759B01
C-5, 11
TD17760B01
C-6
TD17761B01
C-7, 12
TD17762B01
C-8
C.
Wiring
Duct
TD17763B01
C-9
TD17758B01
C-4, 10
TD17759B01
CD-5, 11
TD17761B01
C-7, 12
TD19424B01
C-13
TD22960B01
C-14
D.
Terminals
and
Reel
Smart™
System
TD22961B01
C-15
TD22962B01
C-16
TD23612B01
CD-800-17
TD17757B01
CD-800-18
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
Continues on next page
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 19
For service and technical support, call 800-777-3300.
D.19
7/25/16 7:44 AM
Tool Solutions
Die Information (continued)
A.
Cable
Ties
Part Number
CD9-1A
CD9-1AD***
Color
Code
Red
CD9-1B
CD9-2A
B.
Stainless
Steel
CD9-2AD***
CD9-4A
CD9-4B
C.
Wiring
Duct
18 – 14,
16 – 14
Blue
0.188
4.78
0.188
4.78
0.188
4.78
0.188
4.78
PV-56R, PV-38R
0.188
4.78
PV, DV, DV-M,
PN, PNF, DNF-M,
PV12, PN12
0.188
4.78
TD24139C01
TD24149C01
TD24130C01
TD24140C01
TD23712C01
Insulation Support
DNF-FIB, DNF-LPB 0.188
4.78
22 – 18
Insulation Support
0.188
4.78
16 – 14
Insulation Support
0.188
4.78
16 – 14
Insulation Support
0.188
4.78
0.188
4.78
TD23700C01 TD23683C01 TD23716C01
0.125
3.18
TD23701C02 TD23684C01 TD23717C01
0.188
4.78
TD23702C01 TD23685C01 TD23718C01
0.125
3.18
TD23703C01 TD23686C01 TD23719C01
DPF-FIB, DPF-LPB 0.188
4.78
Insulation Support
Red
22 – 18
Insulation Support
CD9-8B
Blue/ 16 – 14,
Red 22 – 14
Red/ 22 – 14
Blue
Insulation Support
Insulation Support
DNFR-FIB
Red
22 – 18
CD9-10B
Red
22 – 18
CD9-11A
Blue
16 – 14
CD9-11B
Blue
16 – 14
CD9-12A
Red
22 – 18
CD9-18B
TD24129C01
22 – 18
Red
22 – 18
CD9-16A
CD9-17B
Spare Part Number
Cutter Die
Lower Die
– 10,
Yellow 12
16 – 12
Red
CD9-13B
Crimp Die
Plastic Ins. Crimp,
Metal Ins. Grip,
Plastic Ins. Crimp
CD9-6B
CD9-7A
CD9-15A
D.20
16 – 14 Plastic Insulation Crimp
4.78
Blue
CD9-5A
CD9-14A
F.
Part
Number
Index
16 – 14
60/40
Solder Slug
Diameter
In.
mm
0.188
CD9-5B
CD9-10A
E.
Power
Connectors
and
Grounding
22 – 18
Wire Insulation
Strain Relief
Part No. Prefix
Insulation Support,
BSN, BSP, PV,
Plastic Ins. Crimp,
DV-B, DV-MB, PN,
Plastic Ins. Crimp,
PNF, DNF-M
Metal Ins. Grip
Plastic Insulation Crimp, PV, DV-B, DV-MB,
Metal Insulation Grip
PN, PNF, DNF-M
Plastic Insulation Crimp PV-56R, PV-38R
Insulation Support,
BSN, BSP, BSN,
Plastic Ins. Crimp,
PV, DV-B, DV-MB,
Insulation Support,
PN, PNF, DNF-M
Plastic Ins. Crimp,
Metal Ins. Grip
BSN, PV, DV-B,
Insulation Support,
Plastic Insulation Crimp, DV-MB, PN, PNF,
DNF-M
Metal Insulation Grip
DNF-FIM,
DNF-FIMB
DNF-FIB, DNF-LPB
DNF-FIM,
DNF-FIMB
DNF-FIBX
DNF-110, 111,
112FIB
DNF-FIBX,
DNF-FIMX
CD9-9C
D.
Terminals
and
Reel
Smart™
System
22 – 16,
22 – 18
22 – 18
CD9-2B
CD9-3B
AWG
Wire
Range
Yellow 12 – 10
Red/
Blue
22 –18,
16 – 14
DiscoGrip™
Insulation Crimp
DiscoGrip™
Insulation Crimp
DiscoGrip™
Insulation Crimp
DiscoGrip™
Insulation Crimp
DiscoGrip™
Insulation Crimp
Insulation Support,
DiscoGrip™
Insulation Crimp
DPF-FIM,
DPF-FIMB
0.188
4.78
DPF-FIB, DPF-LPB 0.188
4.78
TD24131C01 TD24141C01 TD23713C01
TD24132C01 TD24142C01 TD24150C01
TD24133C01 TD24143C01 TD24151C01
TD24132C01 TD24144C01 TD24150C01
TD24133C01 TD23688C01 TD24151C01
DPF-FIM,
DPF-FIMB
DPF-110FIB,
DFP-111FIB
0.188
4.78
0.125
3.18
TD23701C02 TD23689C01 TD23717C01
DNF-FIB, DPF-FIB
0.188
4.78
TD24134C01 TD24145C01 TD24152C01
DNG-FL
0.125
3.18
TD23705C01 TD23691C01 TD23721C01
Metal Insulation Grip
Red
22 – 18
Metal Insulation Grip
DNG-FB
0.188
4.78
TD24135C01 TD24146C01 TD24153C01
Blue
16 – 14
Metal Insulation Grip
DNG-FB
0.188
4.78
Yellow 12 – 10
Insulation Support
BSN
0.188
4.78
TD24136C01 TD24147C01 TD24154C01
TD24110C01 TD24109C01 TD24111C01
TD24112C01
Yellow 12 – 10
Insulation Support
DNF-FIMB
0.188
4.78
TD24131C01 TD23766C01 TD23713C01
SCA-712022005WE
(CD10-1)
—
20 – 18
Insulation Support
FSD75, FSD76
—
—
—
—
—
SCA-712022006WE
(CD10-2)
—
18 – 16
Insulation Support
FSD77, FSD78
—
—
—
—
—
SCA-712022007WE
—
14
Insulation Support
FSD80
—
—
—
—
(CD10-3)
TA13721A01 = 60/40 Solder Slug with 1/8" (0.125) outer diameter.
TA13722A01 = 60/40 Solder Slug with 3/16" (0.188) outer diameter.
(1) Insulation Support: Minimum wire insulation strain relief for normal applications.
Plastic and DiscoGrip™ Insulation Crimp: Secondary wire insulation strain relief for high vibration or conductor strain applications.
Metal Insulation Grip: Maximum wire insulation strain relief for high vibration or conductor strain applications.
***Modified lower die for barrel insulated disconnects DV-B series. Available as a complete die set or just lower die assembly.
—
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 20
7/25/16 7:44 AM
Terminals and Reel Smart™ System
SCA-712022002 (CA10), CA9 Ezaiar™, and CA-800EZ Applicators Wire Processing
Machine Manufacturer/Press Compatibility
Manufacturer
PANDUIT
TE CONNECTIVITY
ARTOS
GAMMA MECCANICA
KODERA
KOMAX
MEGOMAT
MOLEX
SCHLEUNIGER
SHINMAYWA
Wire Processing Machine with (WPM) or
Bench Press Only
CP-861 press only
CP-871 press only
CLS III G with G press (AWP)
CLS IV with G press (AWP)
CLS IV G plus with G press (AWP)
G bench press only
CLS II with T press (AWP)
CLS III with T press (AWP)
T bench press only
K bench press only
3K40
5K40
CS-600 with AMP G press (AWP)
CS-600 with TU7M press (AWP)
CS-600 with TU-10 press (AWP)
MTX Series 5 with TU-10 press (AWP)
T20P-110V bench press only
Series C451/C450 (AWP)
Series C551/C550 (AWP)
Gamma 311 with Mecal K300 press (AWP)
Gamma 333 with mci 711 press (AWP)
Alpha 411 with Mecal PE7 or P107 press (AWP)
Alpha 433 with Mecal PE7 or P107 press (AWP)
40T with Mecal PE7 press (AWP)
40T with Panduit CP-861 press (AWP)
bt711 bench press only
bt722
AMS 3001A/APE 300 press (AWP)
Contact (AWP)
Primo with MP-3.0 press (AWP)
EP-20 bench press only
TM-2000 bench press only
Crimp center 12 with ACP01 press (AWP)
Crimp center 64 (AWP)
UC-200 bench press
Crimpcenter 36 (AWP)
UC-100
SC-200 (CRIMP MODE ONLY)
TR101 (AWP)
TRD111/TR111 (AWP)
SCA-712022002
(CA10)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Panduit Applicators
CA9
CA-800EZ*
A1
A1
B
A1
A1
B
A1
A1
A1
A1
A3
B
B
A
A
A1
B
A1
A1
A1
A1
A1
A1
B2
A1
A1
B2
A1
A1
A
A1
A1
A1
A1
A1
A1
A
A
A
A1
B4
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
B
B
B
B
B
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_D_Terminals_TC_v2.indd 21
For service and technical support, call 800-777-3300.
D.21
7/25/16 7:44 AM
Tool Solutions
Performance Requirements
A.
Cable
Ties
Wire Size (AWG)
#26 #24 #22 #20 #18 #16 #14 #12 #10
UL 486A (Terminals), UL 310 (Male Blade Adapters)
3.5 7
9 12 17 18
Test current for max. 50°
rise (amps)
35
50
Min. tensile strength* (lbs.)
3
5
8
13
20
30
50
70
80
Test current for max. 50°C
rise (amps)
5.5
7
9
12
17
18
30
35
50
Min. tensile strength* (lbs.)
3
5
8
10
10
15
25
35
40
#22
#20
#18
#16
#14
#12
#10
Continuous test current for
max. 30°C rise (amps)
(for 0.187", 0.205", 0.250"
tab widths)
3
4
7
10
15
20
24
Continuous test current for
max. 30°C rise (amps) (for
0.110" tab width)
2
3
4
5
Not Applicable
Min. tensile strength* (lbs.)
8
13
20
30
50
UL 486C (Splices)
B.
Stainless
Steel
30
●●UL 486A (Terminals)
●●UL 486C (Splices)
●●UL 310 (Blade Adapters)
●●CSA C22.2 No. 65 (all designs)
●●UL and CSA approved products are shown with
the applicable logos in the product section.
●●UL file #E52164, CSA File #LR31212
*Pull-out force of the crimped terminal.
Wire Size (AWG)
UL 310 (Disconnects)
C.
Wiring
Duct
Applicable Pan-Term ® products meet or exceed
the following test specifications:
70
*Pull-out force of the crimped terminal.
D.
Terminals
and
Reel
Smart™
System
80
Applicable Reel Smart ™ products meet or
exceed the following test specifications:
●●Listed per Underwriters Laboratories, Inc.
Standard UL 310 (Disconnects)
●●Recognized under the Component Recognition
Program of Underwriters Laboratories Inc.
●●Certified by Canadian Standards
Association (Disconnects)
●●UL and CSA listed products are shown with the
applicable logos in the product section.
●●UL file #E78526, CSA file #LR31212
Applicable Panduit ® ferrules meet or exceed the
following test specifications:
●●UL 486F
●●CSA-C22.2 No. 291-14.
●●DIN color code
●●UL and CSA listed products are shown with the
applicable logos in the product section.
●●UL file #E472545, CSA file #LR31212
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
D.22
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_D_Terminals_TC_v2.indd 22
7/25/16 7:44 AM
Power Connectors and Grounding
Compression Connector
Crimping Tools
A.
Cable
Ties
Panduit ® offers a wide range of tools to provide solutions for installing
compression lugs and splices. Panduit installation tools provide quality
performance, ease of installation, and lowest installed cost. The long-term
reliability of Panduit installation tools provides the highest level of service to
meet and surpass customer requirements.
• Ergonomic design to minimize operator effort
B.
Stainless
Steel
• Controlled cycle mechanisms ensuring
reliability and repeatability in every
crimp made
• Crimping dies are color coded to easily match
the compression connector to the proper die
• UL Listed and CSA Certified terminations with
Panduit compression connectors, as noted
Panduit compression connector crimping tools are available
in an assortment of styles including manually operated
mechanical and hydraulic, battery operated hydraulic, and
AC powered hydraulic to meet a variety of installation needs.
Uni-Die™ Dieless Crimping Tools crimp a variety of sizes
and eliminate the need to purchase crimping dies. Fully
self-contained, Lithium-Ion battery powered crimping tools
provide the ease of push button crimping with up to 35%
more crimps per battery charge and up to a 30% faster
crimp cycle time than comparable tools with NiCd or
NiMH batteries.
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 1
For service and technical support, call 800-777-3300.
E.1
7/25/16 7:56 AM
Tool Solutions
Crimping Guidelines for Panduit ® Pan-Lug™ Compression Lugs and Splices
A.
Cable
Ties
1. Select the proper Panduit compression
connector for the conductor type and size
being used.
●●Panduit compression connectors are identified
with the proper conductor size and conductor
type marked on the tongue or barrel of
the connector
B.
Stainless
Steel
●●The proper conductor size
and type to be used with
each connector can also
be found in the installation
instructions included with
Panduit product packaging
and in the tool charts* in
this catalog
2. Strip the conductor to the proper strip length.
As specified:
●●On the Panduit product packaging
label or
●●On the installation instructions
included with Panduit product
packaging or
●●In the tool charts* in this catalog
Make sure the conductor is not stripped too long, which
would result in exposed wire between the barrel of the
connector and the cable insulation.
Make sure the conductor is not stripped too short, which
would result in a less than complete contact area with the
connector when the conductor is inserted in the barrel.
Do not nick or cut strands of conductor
during crimping, which would result in a
less than premium conductor termination.
Make sure conductor strands are free
from corrosion.
C.
Wiring
Duct
3. Select the proper crimping die and crimping
tool to be used with the connector.
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
Use crimping tools and dies that provide a UL Listed and/
or CSA Certified electrical termination, to assure a safe and
reliable connection.
Many Panduit compression connectors are
UL Listed and CSA Certified when crimped with
Panduit and specified competitor crimping tools
and dies. These tools and dies are listed in the
tool charts* in this catalog. Panduit crimping tools
and dies to be used with each connector are also
listed on the installation instructions included with
Panduit product packaging.
Panduit compression connectors are color-coded and
marked with Panduit and specified competitor die index
numbers. Select the proper crimping die to be used by
matching the color code and die index number marked on
the connector to the same markings on the crimping die.
4. Crimp the connector.
Insert the conductor into the barrel of
the connector. The conductor should
stop against the end of the barrel of the
lug, or wire stop in the butt splice, upon
complete insertion of the conductor in
the barrel. Some lugs are offered with
inspection windows that provide visual
inspection of the complete conductor insertion.
Review the installation instructions included with the
Panduit product packaging or the tool charts* for the proper
number of crimps to be placed in the connector. Make the
first crimp in the barrel nearest the tongue of the lug, or wire
stop in a butt splice, and make successive crimps in the
barrel working
towards the
conductor
entry at the
end of the
barrel. Use the
color-coded
or knurled
Identify
band markings on the barrel of the
connector to evenly space the placement of the crimps in
the barrel.
When properly crimped, the die index number
engraved in the crimping die will be embossed into
the barrel of the connector. The crimp should be
placed in the connector so the die index number
can be easily read when the connector is installed.
F.
Part
Number
Index
*See tool charts on pages E.25 – E.57.
E.2
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 2
7/25/16 7:56 AM
Power Connectors and Grounding
Selection Guide – Compression Connector Tools
Tool Selection Guide for Crimping Panduit Copper Compression Lugs and Splices for use with Copper Code Conductors
Conductor Connector
Type
Type
Tool
Type
Copper Conductor Range
A.
Cable
Ties
#14 #12 #10
#8
#6
#4
#3
#2
#1
1/0
2/0
3/0
4/0 250 300 350 400 500 600 750 800 1000
AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil
CT-100A – Plier
Type
(pg. D.5)
CT-200 – Plier
Type
(pg. D.5)
Manual
Crimping
Tools
Copper
Code
Conductor
LCAS
LCA
LCAN
LCB
LCB-W
LCBH
LCD
LCDN
LCC
LCC-W
LCCN
LCCH
SCSS
SCS
SCL
SCH
SCT
PS
RSC
S-R
CT-1570–
Controlled Cycle
(pg. D.6)
B.
Stainless
Steel
CT-1701–
Controlled Cycle
(pg. D.6)
CT-1700* – Controlled Cycle
(pg. D.6)
CT-720 – Die Type
(pg. E.6)
Manual
Hydraulic
Crimping
Tools
CT-930 – 14 ton
(pg. E.9)
C.
Wiring
Duct
CT-980 Uni-Die™ Dieless – 6.2 ton
(pg. E.21)
CT-3001 – In-Line – 6 ton
(pg. E.10)
LithiumIon
Battery
Powered
Hydraulic
Crimping
Tools
CT-2930/L – 14 ton
(pg. E.12)
CT-2940/L – 15 ton
(pg. E.13)
D.
Terminals
and
Reel
Smart™
System
CT-2980/L Uni-Die™ Dieless – 6.2 ton
(pg. E.22)
CT-930CH – 14 ton
(pg. E.14)
Remote
Crimp
Heads
CT-940CH – 15 ton
(pg. E.15)
CT-980CH Uni-Die™ Dieless – 6.2 ton
(pg. E.23)
See tool charts on pages E.25 – E.57 for selection of crimping dies and number of crimps used with specific tool and connector combinations.
*CT-1700 is not used for PSC splices.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
Continues on next page
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 3
For service and technical support, call 800-777-3300.
E.3
7/25/16 7:56 AM
Tool Solutions
Selection Guide – Compression Connector Tools (continued)
A.
Cable
Ties
B.
Stainless
Steel
Tool Selection Guide for Crimping Panduit Copper Compression Lugs and Splices for use with Copper Flex Conductor
Conductor
Type
Copper
Code
and
Flex
Conductor
Connector
Type
Tool
Type
Manual
Crimping
Tools
Manual
Hydraulic
Crimping
Tool
LCAX LithiumLCAXN
Ion
LCBX
Battery
LCDX Powered
LCDXN Hydraulic
LCCX Crimping
LCCXN
Tools
Remote
Crimp
Heads
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
Copper LCAF
LCCF
Flex
Con- SCSF
ductor RSC
Manual
Hydraulic
Crimping
Tool
LithiumIon
Battery
Powered
Hydraulic
Crimping
Tools
Remote
Crimp
Heads
Copper Conductor Range
#8
#6
#4
#3
#2
#1
1/0
2/0
3/0
4/0 250 262 300 313 350 373 400 450 500 535 600 646 750 777
AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil
CT-1700 – Controlled Cycle
(pg. D.6)
CT-930 – 14 ton
(pg. E.9)
CT-3001– In-Line – 6 ton
(pg. E.10)
CT-2930/L – 14 ton
(pg. E.12)
CT-2940/L – 15 ton
(pg. E.13)
CT-930CH – 14 ton
(pg. E.14)
CT-940CH – 15 ton
(pg. E.15)
CT-930 – 14 ton
(pg. E.9)
CT-2930/L – 14 ton
(pg. E.12)
CT-2940/L – 15 ton
(pg. E.13)
CT-930CH – 14 ton
(pg. E.14)
CT-940CH – 15 ton
(pg. E.15)
See tool charts on pages E.25 – E.57 for selection of crimping dies and number of crimps used with specific tool and connector combinations.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.4
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 4
7/25/16 7:56 AM
Power Connectors and Grounding
Selection Guide – Compression Connector Tools (continued)
Tool Selection Guide for Crimping Panduit Copper Compression Lugs and Splices for use with Copper Flex Conductor
Conductor
Type
Connector
Type
Tool
Type
Manual
Crimping
Tools
Copper
or
Aluminum
Code
Conductor
LAA
LAB
SA
Manual
Hydraulic
Crimping
Tool
Lithium-Ion
Battery
Powered
Hydraulic
Crimping
Tools
Remote
Crimp
Heads
#6
AWG
#4
AWG
CT-1700 –
Controlled
Cycle
(pg. D.6)
#3
AWG
#2
AWG
#1
AWG
Copper or Aluminum Conductor Range
1/0
AWG
2/0
AWG
3/0
AWG
4/0
AWG
250
AWG
A.
Cable
Ties
300
350
400
500
600
750
800
1000
kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil
CT-720 – Die Type
(pg. E.6)
CT-930 – 14 ton
(pg. E.9)
B.
Stainless
Steel
CT-2930/L – 14 ton
(pg. E.12)
CT-2940/L – 15 ton
(pg. E.13)
CT-930CH – 14 ton
(pg. E.14)
CT-940CH – 15 ton
(pg. E.15)
See tool charts on pages E.25 – E.57 for selection of crimping dies and number of crimps used with specific tool and connector combinations.
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 5
For service and technical support, call 800-777-3300.
E.5
7/25/16 7:56 AM
Tool Solutions
Contour Crimp™ Controlled Cycle Tools
A.
Cable
Ties
●●Controlled cycle mechanism assures high quality,
consistent terminations
●●Ergonomic tool design assures operator comfort, safety,
and performance
Part Number
Part Description
Crimps Panduit #8 – 2 AWG non-insulated tubular terminals (S series),
#8 – 1 AWG copper code conductor lugs and splices, #8 – 2 AWG
copper flex conductor lugs, #6 – 4 AWG dual rated aluminum lugs
and splices and CTAPF10-16 to CTAPF3-12 copper taps. Includes
5-position, color coded rotating die.
Crimps Panduit #10 – 2 AWG non-insulated large gauge ring terminals
(P series), #12 – 4 AWG non-insulated heavy duty ring terminals
(P series), and #14 – 10 AWG copper code conductor lugs. Includes
5-position, rotating die.
CT-1700
B.
Stainless
Steel
●●Polypropylene handles provide chemical resistance and a
cushioned, non-slip grip
CT-1700
CT-1701
CT-1701
Std.
Pkg.
Qty.
1
1
Die Type, Manual, Crimping Tool
C.
Wiring
Duct
●●High quality, durable tool construction provides long
term dependability
●●Develops 6 tons of crimping force, crimps copper
compression lugs and splices up to 500 kcmil
Part Number
CT-720
D.
Terminals
and
Reel
Smart™
System
●●Provides UL Listed and CSA Certified connections on
Panduit copper and aluminum lugs, splices, and
insulated terminals
Part Description
Manual crimping tool for UL Listed or Recognized and CSA Certified
terminations of Panduit ® Pan-Lug™ copper compression lugs and
splices for #8 AWG – 500 kcmil copper code conductor and aluminum
compression lugs and splices for #6 AWG – 350 kcmil copper and
aluminum code conductors. Provides UL Listed terminations of Panduit ®
Pan-Term ® #8 – #2 AWG vinyl insulated terminals.
Std.
Pkg.
Qty.
1
Color-coded CD-720 crimping dies, carrying/storage case and controlled
cycle mechanism must be purchased separately.
CC-720
E.
Power
Connectors
and
Grounding
C-720
Specifications:
Output: 6 tons
Weight: 7.7 lbs.
Length: 26"
Handle span: 58" (open), 2.5" (closed)
Warranty: 90 days
Optional controlled cycle mechanism only. Total weight of tool with
CC-720 is 8.25 lbs.
Black steel carrying case for CT-720 crimping tool.
1
1
F.
Part
Number
Index
E.6
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 6
7/25/16 7:56 AM
Power Connectors and Grounding
CD-720 Crimping Dies
●●Color-coded for easy matching to color-coding marked
on connectors
●●Embosses die index number on connector barrels to
provide post crimp inspection except CD-720PV8-2
Part Number
CD-720-1
CD-720-2
CD-720-3
CD-720-4
CD-720-5
A.
Cable
Ties
●●Part number permanently marked on crimping die for
easy identification
●●Provides 5-sided crimp results in terminations with
premium electrical and mechanical performance
Used to Install Panduit Compression Lug and Splice Sizes
Copper Die
Aluminum Die
Copper
Color and
Aluminum
Color and
Conductor Size
Die No.
Conductor Size
Die No.
#8 – #2 AWG
Red P21,
#6 AWG
Gray P29
Blue P24,
Gray P29,
Brown P33
#1 – 3/0 AWG
Green P37,
#4 – 1/0 AWG
Green P37,
Pink P42,
Pink P42,
Black P45,
Gold P45,
Orange P50
Tan P50
4/0 AWG –
Purple P54,
2/0 – 3/0 AWG
Olive P54,
250 kcmil
Yellow P62
Ruby P62
300 kcmil
White P66
4/0 AWG
White P66
350 kcmil
Red P71
250 kcmil
Std.
Pkg.
Qty.
1
1
1
1
Red P71
1
CD-720-6
400 kcmil
Blue P76
300 kcmil
Blue P76
1
CD-720-7
500 kcmil
Brown P87
350 kcmil
Brown P87
1
#8 – #2 AWG,
vinyl insulated
Pan-Term ®
Terminals
Red, Blue,
Yellow
–
–
1
CD-720PV8-2
B.
Stainless
Steel
C.
Wiring
Duct
See pages E.3 – E.5 for connector and tool selection information.
Die Type, Manual, Crimping Tool and Die Kits
●●Available with or without controlled cycle feature to meet
specific applications
Part Number
CT-720-7
CT-720-7CC
CT-720-3
CT-720-3CC
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 7
●●Kits available with three or full set of seven dies for
crimping partial or full range of connector sizes
Part Description
Basic tool kit with seven dies.
Includes:
• Seven dies (CD-720-1 through CD-720-7) for installing
#8 AWG – 500 kcmil copper compression connectors
• Carrying/storage case (C-720)
Controlled cycle tool kit with seven dies. Controlled cycle mechanism
factory installed on crimping tool.
Includes:
• Seven dies (CD-720-1 through CD-720-7) for installing
#8 AWG – 500 kcmil copper compression connectors
• Carrying/storage case (C-720)
Basic tool kit with three dies.
Includes:
• Three dies (CD-720-1 through CD-720-3) for installing
#8 AWG – 250 kcmil copper compression connectors
• Carrying/storage case (C-720)
Std.
Pkg.
Qty.
1
1
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
1
Controlled cycle tool kit with three dies. Controlled cycle mechanism
factory installed on crimping tool.
Includes:
• Three dies (CD-720-1 through CD-720-3) for installing
#8 AWG – 250 kcmil copper compression connectors
• Carrying/storage case (C-720)
For service and technical support, call 800-777-3300.
F.
Part
Number
Index
E.7
7/25/16 7:56 AM
Tool Solutions
Cable Stripping Tool for Large Cable Sizes
A.
Cable
Ties
●●Provides safe and easy stripping of cable insulation for
cables 3/16" to 1 9/16" diameter
●●Unique blade profile for long life, low friction stripping of
difficult insulations like rubber and silicon
●●Spiral cut mode, tough/hard insulations peel off easily
●●Ergonomic shape for safe comfortable use
●●Cutting blade provides circular, spiral, and in-line
insulation cutting
●●In-line cut mode for use with softer insulation
like neoprene
B.
Stainless
Steel
Part Number
CST114-157
CST114-157B
●●Cutting blade easily adjusts to proper height to cut
insulation without nicking conductor strands
●●Compact design
●●Easy-fit replacement blade, one spare blade included
with tool
Wire Range (O.D.)
Part Description
0.18" – 1.57"
Cable stripping tool for stripping insulation
from cables 3/16" to 1 9/16" diameter. Includes
replacement cutting blade. Warranty: 90 days
—
Blade replacement kit for CST114-157 cable
stripping tool.
Std.
Pkg.
Qty.
1
1
Wire and Cable Stripping Tools
C.
Wiring
Duct
●●Strips and cuts #20 – #10 AWG wire
●●Lightweight and durable for comfortable long use
CST101
Wire Range (O.D.)
#20 – #10 AWG
Part Description
V notch wire stripper.
Std.
Pkg.
Qty.
1
CST115
#20 – #10 AWG
Plier nose wire stripper.
1
Part Number
CST101
D.
Terminals
and
Reel
Smart™
System
●●Rust resistant coating included to improve durability
of tool
CST115
Cable Cutting Tools
●●Designed with optimal force transmission ratio and
stepwise cutting to allow for one-hand operation
●●Ergonomically formed, soft handle grips provide easy
operation without fatigue
E.
Power
Connectors
and
Grounding
Part Number
CCT-500
CCT-320
CCT-500
CCT-320
●●All parts made of high-tempered special steel; blades and
stressed parts are specially tempered or hardened for
long term durability
●●Not for use with steel and ASCR cable
Part Description
Ratchet cable cutting tool cuts both copper and aluminum solid code and
stranded flex cables (AL & CU cable to 1000MCM) up to 2 -1/32" (52mm)
diameter. Approximate dimensions 14" (356mm) x 5-1/2" (140mm) x 1"
(25.4mm). Tool weight 29.6 oz. (840 g). Warranty: 1 year.
Ratchet cable cutting tool cuts both copper and aluminum solid code cables (AL
cable to 600MCM and CU cable to 500MCM) from 1/4" (6mm) to 1" (25mm) and
stranded flex cables from 1/4" (6mm) to 1-1/4" (32mm) diameter. Approximate
dimensions 10" (254mm) x 3-3/4" (95mm) x 1" (25.4mm). Tool weight 21 oz.
(600 g). Warranty: 1 year.
Std.
Pkg.
Qty.
1
1
F.
Part
Number
Index
E.8
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 8
7/25/16 7:56 AM
Power Connectors and Grounding
Die Type, Manual Hydraulic, 14 Ton, Crimping Tool
●●Develops 14 tons of crimping force, crimps copper
compression lugs and splices up to 750 kcmil
●●Two-stage rapid advance hydraulic system minimizes
number of pumps required to complete a crimp,
saves time
●●High quality, durable tool construction provides
long-term dependability
●●Cushioned grip prevents hands from slipping on tool,
reduces fatigue
●●Provides UL Listed and CSA Certified connections on
Panduit ® Pan-Lug™ Copper and Aluminum Lugs and
Splices and Copper Taps
Part Number
CT-930
●●Open “C-Head” design allows easy loading of crimping
dies and connectors, saves time
●●Uses color-coded crimping dies to provide easy matching
of crimping die to connector
A.
Cable
Ties
●●Embosses die index number on connector barrels to
provide post crimp inspection
●●Dies installed using spring loaded die retention pins, no
need for tools
●●Rubber boot on crimp head provides abrasion protection
●●Audible “pop-off” valve indicates crimp completion
●●Crimp head rotates 180 degrees, provides versatility for
use in restricted spaces
Part Description
Terminates Panduit ® Pan-Lug™ Compression Connectors:
•C
opper compression lugs and splices for #8 AWG – 750 kcmil code conductor
•C
opper compression lugs and splices for #8 AWG – 600 kcmil flex conductor
•C
opper compression lugs and splices for 10mm2 – 400mm2 Class 2r and
10mm2 – 300mm2 Class 5f and Class 6f Metric Wire.
• Copper compression CTAPF taps for #10 – 3/0 AWG code conductor
• Copper compression CTAP taps for #8 – 4/0 AWG code conductor
• Copper compression HTCT taps for #14 AWG – 250 kcmil code conductor,
#14 – 4/0 AWG flex conductor
• Aluminum compression lugs and splices for #6 AWG – 600 kcmil
code conductor
• Panduit ® Type S-R Tubular Terminals for #8 AWG – 250 kcmil code conductor
B.
Stainless
Steel
Std.
Pkg.
Qty.
1
Specifications:
Output: 14 tons
Jaw opening: 1.65"
Weight: 16.5 lbs.
Length: 25"
Handle span: 17 1/2" (open), 6" (closed)
Warranty: 1 year
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
CT-930 includes:
• Tool
• Plastic tool case with die storage
Uses CD-920 and CD-930 color-coded crimping dies. Dies must be purchased separately, see page E.19.
CG-920 crimp force measurement gauge available, sold separately see page E.24.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 9
For service and technical support, call 800-777-3300.
E.9
7/25/16 7:56 AM
Tool Solutions
Die Type, Lithium-Ion Powered Hydraulic, 6 Ton, In-Line Crimping Tool
A.
Cable
Ties
●●Lithium-Ion battery powered, provides fingertip operation
and up to 90% more crimps per battery charge than tools
powered with NiCd or NiMH batteries
●●Batteries incorporate LED fuel gage so battery charge
level can be checked to allow for continuous operation
●●Lightweight and ergonomically balanced for easy
operation without fatigue, weighs 7.15 lbs. with battery
●●Battery charger charges expended batteries completely in
60 minutes
●●In-line tool design with low profile, 180° rotating, enclosed
crimp head design for reaching into tight spaces
●●Self-contained unit, completely portable
B.
Stainless
Steel
●●Develops 6 tons of crimping force, up to 389 crimps
per battery charge using Panduit 500 kcmil copper lugs
and splices
●●Provides UL Listed and CSA Certified connections on
Panduit copper lugs, splices and taps
●●Audible “pop-off” valve indicates crimp completion
●●Approximately 2.9 second crimp cycle time provides
quick terminations, 26% faster than tools with NiCd or
NiMH batteries
●●Compatible with CD-2001 color-coded crimping dies to
provide easy matching of crimping die to connector
●●Embosses die index number on connector barrels to
provide post crimp inspection
●●Dies installed using spring loaded die retention pins, no
need for tools
●●T
ool provided with two 14.4 VDC Lithium-Ion rechargeable
batteries, battery charger, wrist strap and tool bag
Part Number
CT-3001
C.
Wiring
Duct
Charger Voltage
120 VAC
CT-3001 and CT-3001/E
D.
Terminals
and
Reel
Smart™
System
CT-3001/E
230 VAC
FREE! Heavy-Duty Soft Sided
Tool Bag Included
Specifications:
Output: 6 tons (54 Kn)
Jaw opening: 1.8" (45.7mm)
Weight: 7.15 lbs. (3.2 kg) with battery
Length: 19.5" (495.3mm), Height: 4.5" (114.3mm),
Width: 2.88" (73mm)
Warranty: 1 year on tool, batteries, and charger
1
1
Tool includes:
• Two 14.4 VDC high capacity Lithium-Ion
rechargeable batteries
• One battery charger
• Heavy-duty bag with storage for tool, batteries,
charger and crimping dies; includes 58 pockets
and a shoulder strap for added convenience;
18"L x 7"W x 14"H*
E.
Power
Connectors
and
Grounding
PTB-HO (sold separately)
Part Description
Terminates Panduit Compression Connectors:
• Copper compression lugs and splices for
#8 AWG – 500 kcmil code conductor
• Copper compression lugs for #8 AWG – 373 kcmil
flex conductor
• Copper compression CTAPF taps for
#10 – 3/0 AWG code conductor
• Copper compression CTAP taps for #8 – #2 AWG
code conductor
• Copper compression S Series Pan-Term ® Tubular
Terminals for #8 AWG – 250 kcmil code conductor
• Copper compression lugs and splices for
10mm² – 240mm² Class 2r, 10mm2 –
95mm2 Class 5f and Class 6f Metric Wire
Std.
Pkg.
Qty.
PTB-HO
—
Streamlined holster for CT-3001 Series tools. Can be
secured to installer’s tool belt or ladder/fixture with
quick connect hooks provided.
1
Compatible with CD-2001 crimping dies, sold separately, see page E.11.
F.
Part
Number
Index
E.10
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 10
7/25/16 7:56 AM
Power Connectors and Grounding
CD-2001 Crimping Dies
●●Color-coded to provide easy matching to color-coding
marked on connectors
●●Part number permanently marked on crimping die for
easy identification
●●Embosses die index number on connector barrels to
provide post crimp inspection
Part Number
CD-2001
CD-2001-8-SET
Blue P24
#6 AWG
#6 AWG
16mm2
CD-2001-4-SET
Gray P29
CD-2001-2-SET
Brown P33
#4 AWG STR
#3 AWG STR
#2 AWG SOL
#2 AWG
#4 AWG
#5, #4, #3 AWG
DLO flex
#2 AWG
25mm2
35mm2
CD-2001-1-SET
Green P37
#1 AWG
#1 AWG
50mm
CD-2001-1/0-SET
Pink P42
1/0 AWG
1/0 AWG
—
CD-2001-2/0-SET
Black P45
2/0 AWG
2/0 AWG
70mm
CD-2001-3/0-SET
Orange P50
3/0 AWG
3/0 AWG
—
CD-2001-4/0-SET
Purple P54
4/0 AWG
4/0 AWG
95mm
CD-2001-250-SET
Yellow P62
250 kcmil
120mm2
1
CD-2001-300-SET
White P66
300 kcmil
250 kcmil flex
262 kcmil flex
—
150mm2
1
CD-2001-350-SET
Red P71
350 kcmil
—
1
CD-2001-400-SET
Blue P76
400 kcmil
185mm2
1
CD-2001-500-SET
Brown P87
500 kcmil
240mm2
1
CD-2001-8-SET
300
313
350
373
kcmil
kcmil
kcmil
kcmil
—
flex
flex
flex
flex
—
2
1
B.
Stainless
Steel
1
1
1
1
2
1
1
2
Used to Install Panduit Tap Part Numbers
Copper
Die Color and Die No.
Copper Tap
No. of Crimps
Red P21
CTAPF10-16-C
1
1
Std.
Pkg.
Qty.
1
CD-2001-6-SET
Blue P24
CTAPF8-12-C
1
1
CD-2001-4-SET
Gray P29
CTAPF6-12-C
1
1
CD-2001-2-SET
Brown P33
CTAPF4-12-C
2
1
CD-2001-1-SET
Green P37
CTAPF3-12-C
2
1
CD-2001-1/0-SET
Pink P42
CTAPF2-12-C
2
1
CD-2001-2/0-SET
Black P45
CTAPF1-12-C
3
1
CD-2001-3/0-SET
Orange P50
CTAPF1/0-12-L
3
1
CD-2001-4/0-SET
Purple P54
CTAPF2/0-12-Q
3
1
CD-2001-250-SET
Yellow P62
CTAPF3/0-12-Q
3
1
CD-2001-BG-SET
PBG
CTAP4-8-L
1
1
PBG
CTAP4-6-L
1
PBG
CTAP4-4-L
1
P-C
CTAP2-4-Q
2
P-C
CTAP2-2-X
2
CD-2001-C-SET
2016_IEI_E_Grounding Connectors_TC_v4.indd 11
Used to Install Panduit Compression Lug and Splice Sizes
Copper Code
and Flex
Copper
Conductor Size
Copper Metric Std.
Die Color
Copper Code
for LCAX, LCBX,
Class 2r
Pkg.
and Die No.
Conductor Size
LCDX, LCCX
Conductor Size Qty.
Red P21
#8 AWG
#8 AWG
10mm2
1
CD-2001-6-SET
Part Number
www.panduit.com
●●Provide circumferential crimp results in terminations with
premium electrical and mechanical performance
A.
Cable
Ties
1
For service and technical support, call 800-777-3300.
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.11
7/25/16 7:56 AM
Tool Solutions
Die Type, Lithium-Ion Powered Hydraulic, 14 Ton, Crimping Tool
A.
Cable
Ties
●●Lithium-Ion battery powered, provides fingertip operation
and up to 63% more crimps per battery charge than tools
powered with NiCd or NiMH batteries
●●Pistol grip tool design with open “C-Head” provides easy
loading of crimping dies and rotates 180°, for reaching
into tight spaces
●●Ergonomically balanced for easy operation without
fatigue, weighs 17.9 lbs. with battery
●●Self-contained unit, completely portable
B.
Stainless
Steel
●●Develops 14 tons of crimping force, crimps copper
compression lugs and splices up to 750 kcmil, up to 78
crimps per battery charge using Panduit 500 kcmil copper
lugs and splices
●●Provides UL Listed and CSA Certified connections on
Panduit copper and aluminum lugs and splices and
copper taps
●●Audible “pop-off” valve indicates crimp completion or Ram
automatically retracts when crimp cycle is complete
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
CT-2930/L
CT-2930/LE
230 VAC
CT-2930/L and CT-2930/LE
●●Batteries incorporate LED fuel gage so battery charge
level can be checked to allow for continuous operation
●●Approximately 9.6 second crimp cycle time provides
quick terminations, 30% faster than tools using NiCd or
NiMH batteries
●●Battery charger charges expended batteries completely
in 60 minutes
●●Compatible with CD-920 and CD-930 color-coded
crimping dies to provide easy matching of crimping die
to connector
●●Embosses die index number on connector barrels to
provide post crimp inspection
●●Dies installed using spring loaded die retention pins, no
need for tools
Part Description
Terminates Panduit compression connectors:
• Copper compression lugs and splices for #8 AWG –
750 kcmil code conductor
• Copper compression lugs for #8 AWG – 600 kcmil
flex conductor
• Copper compression S Series, Pan-Term™ Tubular
Terminals for #8 AWG – 250 kcmil code conductor
• Copper compression lugs and splices for 10mm² –
400mm² Class 2r conductor and 10mm2 – 300mm2
Class 5f and Class 6f metric conductor
• StructuredGround™ Direct Burial Compression
Grounding System connectors #6 AWG –
250 kcmil code conductor and select 500 kcmil
conductor combinations
• Copper compression CTAPF taps for #10 – 3/0 AWG
code conductor
• Copper compression CTAP taps for #8 – 4/0 AWG
code conductor
• Copper compression HTCT taps for #14 AWG –
250 kcmil code conductor, #14-4/0 AWG flex conductor
• Aluminum compression lugs and splices for #6 AWG –
600 kcmil code conductor
Std.
Pkg.
Qty.
1
1
Specifications:
Output: 14 tons (124.5 Kn)
Jaw opening: 1.65" (41.9mm)
Weight: 17.90 lbs. (8.1 kg) with battery
Length: 14.5" (368.3mm), Height: 16.5" (419.1mm),
Width: 3.25" (82.6mm)
Warranty: 1 year on tool, batteries, and charger
FREE! Heavy-Duty Soft Sided
Tool Bag Included
Tool includes:
• Two 14.4 VDC high capacity Lithium-Ion
rechargeable batteries
• One battery charger
• One shoulder strap
• Heavy-duty bag with storage for tool, batteries, charger,
and crimping dies; includes 58 pockets and a shoulder
strap for added convenience; 18"L x 7"W x 14"H*
F.
Part
Number
Index
E.12
Part Number
Charger
Voltage
120 VAC
●●Two 14.4 VDC high capacity Lithium-Ion rechargeable
batteries, battery charger, shoulder strap, and tool bag
Compatible with CD-920 and CD-930 crimping dies, sold separately, see page E.19.
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 12
7/25/16 7:56 AM
Power Connectors and Grounding
Die Type, Lithium-Ion Powered Hydraulic, 15 Ton, Crimping Tool
A.
Cable
Ties
●●Lithium-Ion battery powered, provides fingertip operation
and up to 43% more crimps per battery charge than tools
powered with NiCd or NiMH batteries
●●Tool provided with two 14.4 VDC high capacity
Lithium-Ion rechargeable batteries, battery charger,
and shoulder strap
●●Ergonomically balanced for easy operation without
fatigue, weighs 24.4 lbs. with battery
●●Approximately 8.8 second crimp cycle time provides
quick terminations, 27% faster than tools using NiCd or
NiMH batteries
●●Flip-top crimp head allows easy loading of crimping dies
and connectors and rotates 180°
●●Self-contained unit, completely portable
●●Develops 15 tons of crimping force, crimps copper
compression lugs, splices and taps up to 1000 kcmil, up
to 63 crimps per battery charge when crimping Panduit
500 kcmil copper lugs
●●Provides UL Listed and CSA Certified connections on
Panduit copper and aluminum lugs and splices and
copper taps
●●Audible “pop-off” valve indicates crimp completion
Part Number
CT-2940/L
Charger
Voltage
120 VAC
CT-2940/L and CT-2940/LE
CT-2940/LE
230 VAC
●●Batteries incorporate LED fuel gage so battery charge
level can be checked to allow for continuous operation
●●Battery charger charges expended batteries completely
in 60 minutes
●●Compatible with CD-940, CD-920, and CD-930
color-coded crimping dies to provide easy matching
of crimping die to connector
●●Embosses die index number on connector barrels to
provide post crimp inspection
●●Dies installed using spring loaded die retention pins,
no need for tools
Part Description
Terminates Panduit Compression Connectors:
• Copper compression lugs and splices for #8 AWG –
1000 kcmil code conductor
• Copper compression lugs for #8 AWG – 777.7 kcmil
flex conductor
• Copper compression S Series, Pan-Term™ Tubular
Terminals for #8 – 250 kcmil code conductor
• Copper compression lugs and splices for 10mm2 –
630mm2 Class 2r conductor, 10mm2 – 300mm2 Class 5f
and Class 6f metric conductor
•S
tructuredGround™ Direct Burial Compression
Grounding System connectors #6 AWG – 500 kcmil
code conductor
• Copper compression CTAPF taps for #10 – 3/0 AWG
code conductor
• Copper compression CTAP taps for #8 – 4/0 AWG
code conductor
• Copper compression HTCT taps for #14 AWG – 250
kcmil code conductor, #14 – 4/0 AWG flex conductor
• Aluminum compression lugs and splices for #6 AWG –
1000 kcmil code conductor
Std.
Pkg.
Qty.
1
1
Specifications:
Output: 15 tons (136 Kn)
Jaw opening: 2" (50.8mm)
Weight: 24.35 lbs. (11.0 kg) with battery
Length: 22" (558.8mm), Height: 10.75" (273.1mm),
Width: 3.75" (95.3mm)
Warranty: 1 year on tool, batteries, and charger
Tool includes:
• Two 14.4 VDC high capacity Lithium-Ion
rechargeable batteries
• One battery charger
• One shoulder strap
• Plastic tool case with storage for tool, batteries, charger,
shoulder strap and crimping dies
Compatible with CD-940 crimping dies, sold separately, see page E.20.
Also works with CD-920 and CD-930 crimping dies, on page E.19 with CD-940-DA die adapter, sold separately,
see page E.20.
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 13
B.
Stainless
Steel
For service and technical support, call 800-777-3300.
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.13
7/25/16 7:56 AM
Tool Solutions
Die Type, Remote Hydraulic, 14 Ton, Crimp Head
A.
Cable
Ties
●●Develops 14 tons of crimping force when used with
10,000 psi hydraulic pump and hose, crimps copper
compression lugs and splices up to 750 kcmil
●●Incorporates Parker type quick-connect fittings to ease
installation and save time
●●High quality, durable tool construction provides
long-term dependability
B.
Stainless
Steel
●●Provides UL Listed and CSA Certified connections on
Panduit ® Pan-Lug™ Copper and Aluminum Lugs and
Splices and Copper Taps
Part Number
CT-930CH
C.
Wiring
Duct
●●Open “C-Head” design allows easy loading of crimping
dies and connectors, saves time
●●Uses color-coded crimping dies to provide easy matching
of crimping die to connector
●●Embosses die index number on connector barrels for post
crimp inspection
●●Dies installed using spring loaded die retention pins, no
need for tools
●●Cast in handle allows crimp head to be mounted in a
bench vice
Part Description
Terminates Panduit compression connectors:
• Copper compression lugs and splices for #8 AWG – 750 kcmil code conductor
• Copper compression lugs for #8 AWG – 600 kcmil flex conductor
• Copper compression S Series, Pan-Term™ Tubular Terminals for
#8 AWG – 250 kcmil code conductor
• Copper compression lugs and splices for 10mm2 – 400mm2 Class 2r, 10mm2 –
300mm2 Class 5f and Class 6f metric conductor
• StructuredGround™ Direct Burial Compression Grounding System connectors
#6 AWG – 250 kcmil code conductor and select 500 kcmil conductor
combinations
• Copper compression CTAPF taps for #10 – 3/0 AWG code conductor
• Copper compression CTAP taps for #8 – 4/0 AWG code conductor
• Copper compression HTCT taps for #14 AWG – 250 kcmil code conductor,
#14-4/0 AWG flex conductor
• Aluminum compression lugs and splices for #6 AWG – 600 kcmil
code conductor
Std.
Pkg.
Qty.
1
Use with Panduit CT-901HP hydraulic pump and CT-900HPH 10'
hydraulic hose.*
D.
Terminals
and
Reel
Smart™
System
Specifications:
Output: 14 tons
Jaw opening: 1.65"
Weight: 11 lbs.
Length: 12 1/4"
Height: 5"
Width: 3"
Warranty: 1 year
CT-930CH includes:
ool
•T
• Steel tool case
• Supplied with female Parker type quick-connect fitting assembled to tool
E.
Power
Connectors
and
Grounding
Uses CD-920 and CD-930 color-coded crimping dies. Dies must be purchased separately, see page E.19
*CT-902RCH remote control handle available, offering one hand operation of crimp head with Panduit CT-902HP
hydraulic pump and CT-900HPH hose, sold separately, see page E.16. CG-920 crimp force measurement gauge
available, sold separately, see page E.24.
F.
Part
Number
Index
E.14
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 14
7/25/16 7:56 AM
Power Connectors and Grounding
Die Type, Remote Hydraulic, 15 Ton, Crimp Head
●●Develops 15 tons of crimping force when used with
10,000 psi hydraulic pump and hose, crimps copper
compression lugs and splices up to 1,000 kcmil
●●Incorporates Parker type quick-connect fittings to ease
installation and save time
●●High quality, durable tool construction provides
long-term dependability
●●Provides UL Listed and CSA Certified connections on
Panduit ® Pan-Lug™ Copper and Aluminum Lugs and
Splices and Copper Taps
Part Number
CT-940CH
●●Open “C-Head” design allows easy loading of crimping
dies and connectors, saves time
●●Uses color-coded crimping dies to provide easy matching
of crimping die to connector
A.
Cable
Ties
●●Embosses die index number on connector barrels for post
crimp inspection
●●Dies installed using spring loaded die retention pins, no
need for tools
●●Cast in handle allows crimp head to be mounted in a
bench vice
Part Description
Terminates Panduit Compression Connectors:
• Copper compression lugs and splices for #8 AWG – 1000 kcmil
code conductor
• Copper compression lugs for #8 AWG – 777.7 kcmil flex conductor
• Panduit ® Type S-R Tubular Terminals for #8 AWG – 250 kcmil code conductor
•C
opper compression lugs and splices for 10mm2 – 630mm2 Class 2r
conductor, 10mm2 – 300mm2 Class 5f and Class 6f metric conductor
• StructuredGround™ Direct Burial Compression Grounding System connectors
#6 AWG – 500 kcmil code conductor
• Copper compression CTAPF taps for #10 – 3/0 AWG code conductor
• Copper compression CTAP taps for #8 – 4/0 AWG code conductor
• Copper compression HTCT taps for #14 AWG – 250 kcmil code conductor,
#14 – 4/0 AWG flex conductor
• Aluminum compression lugs and splices for #6 AWG – 1000 kcmil
code conductor
Std.
Pkg.
Qty.
B.
Stainless
Steel
1
Use with Panduit CT-901HP hydraulic pump and CT-900HPH
10' hydraulic hose.*
Specifications:
Output: 15 tons
Jaw opening: 2"
Weight: 14.5 lbs.
Length: 14.5"
Height: 4.1"
Width: 2.5"
Warranty: 1 year
CT-940CH includes:
• Tool
• Steel tool case
• Supplied with female Parker type quick-connect fitting assembled to tool
Uses CD-920 and CD-930 color-coded crimping dies with CD-940-DA die adapter. Uses color-coded CD-940
crimping dies. Crimping dies and die adapter must be purchased separately, see pages E.19 and E.20.
CG-940 crimp force measurement gauge available, sold separately, see page E.24.
*CT-902RCH remote control handle available, offering one hand operation of crimp head with Panduit CT-902HP
hydraulic pump and CT-900HPH hose, sold separately, see page E.16.
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 15
For service and technical support, call 800-777-3300.
E.15
7/25/16 7:56 AM
Tool Solutions
Hydraulic Pump and Accessories, Electric, 10,000 PSI
A.
Cable
Ties
●●Develops 10,000 psi of hydraulic pressure
●●Easy to operate using manual switch or remote pendant
supplied; or optional CT-901RFS foot switch or
CT-901RCH remote controlled handle
●●Factory set relief valve, pump stops when crimp
is complete
Part Number
CT-902HP
B.
Stainless
Steel
D.
Terminals
and
Reel
Smart™
System
CT-902RCH
CT-900HPH
CT-902RFS
CT-902RCH
CT-902RFS
E.
Power
Connectors
and
Grounding
●●Incorporates Parker type quick-connect fittings to ease
installation and save time
●●Versatile, can be used with Panduit CT-930CH,
CT-940CH, or CT-980CH crimp heads
Part Description
Hydraulic pump. Develops 10,000 PSI output. Pump shuts off when cycle
is complete. Will not release until down switch is activated. Compatible
with CT-900HPH hydraulic hose, CT-930CH, CT-940CH, and CT-980CH
crimp heads sold separately.*
Std.
Pkg.
Qty.
1
Specifications:
Pump output: 10,000 psi
Tank capacity: 2.5L incorporates sight gauge for visual inspection of
fluid level
Fluid type: Aero Shell #4 or equal
Motor: 120 VAC 50/50Hz
Current: 6.5 Amps
Horsepower: 1/2 hp
Weight: 34 lbs.
Length: 7"
Height: 14"
Width: 6"
Warranty: 1 year
CT-900HPH
C.
Wiring
Duct
●●Convenient 120 VAC operation
CT-902HP pump includes:
• On/off pendant switch on 10' electric cord
• Three prong A/C plug on 10' electric cord
• Supplied with female Parker type quick-connect fitting assembled
to pump
Electrically non-conductive 10' hose compatible with Panduit CT-901HP
hydraulic pump and CT-930CH, CT-940CH, and CT-980CH crimp heads,
supplied pre-filled with hydraulic fluid for fast start up. Supplied with two
male Parker type quick-connect fittings. Warranty: 1 year.
Remote control handle provides plastic carrying handle incorporating on/
off activation switch that allows operator to hold crimp head and activate
CT-901HP hydraulic pump with one hand. Use with Panduit remote
hydraulic crimp heads CT-930CH, CT-940CH, and CT-980CH. Equipped
with 3/8" Parker type quick-connect coupler for attaching crimp heads to
Panduit CT-900HPH hydraulic hose. Includes a 10', three wire control
cable that can be directly connected to the CT-901HP pump.
Warranty: 1 year.
Dual electrical foot switch that allows convenient “hands free” operation of
the Panduit CT-901HP or CT-8250HP electric hydraulic pumps used with
Panduit remote hydraulic crimp heads. Supplied with 10' electric cord that
can be directly connected to Panduit hydraulic pumps. Warranty: 1 year.
1
1
1
*For information on crimp heads, see pages E.14, E.15, and E.23.
F.
Part
Number
Index
E.16
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 16
7/25/16 7:56 AM
Power Connectors and Grounding
Die Type, Remote Hydraulic, 7.7 Tons, Crimp Head
●●Low pressure system extends life of crimp head for high
volume crimping applications
●●Develops 7.7 tons of crimping force when used with
5000 psi hydraulic pump and hose, crimps copper
compression lugs and splices up to 600 kcmil
●●Incorporates Parker type quick-connect fittings to ease
installation and save time
●●High quality, durable tool construction and low pressure
hydraulic requirements provide long-term dependability
and tool life
●●Provides UL Listed and CSA Certified connections on
Panduit ® Pan-Lug™ Copper Lugs and Splices
Part Number
CT-930LPCH
●●Open “C-Head” design allows easy loading of crimping
dies and connectors, saves time
●●Uses color-coded crimping dies to provide easy matching
of crimping die to connector
A.
Cable
Ties
●●Embosses die index number on connector barrels for post
crimp inspection
●●Dies installed using spring loaded die retention pins, no
need for tools
●●Cast in handle allows crimp head to be mounted in a
bench vice
Part Description
Remote hydraulic crimp head provides UL Listed or Recognized terminations
of Panduit ® Pan-Lug™ Copper Compression Lugs and Splices for #8 AWG –
600 kcmil copper code conductor.
B.
Stainless
Steel
Std.
Pkg.
Qty.
1
Use with Panduit CT-8250HP hydraulic pump and CT-900LPHPH
10' hydraulic hose.*
Specifications:
Output: 7.7 tons
Jaw opening: 1.65"
Weight: 11 lbs.
Length: 12 1/4"
Height: 5"
Width: 3"
Warranty: 1 year
CT-930LPCH includes:
• Tool
•S
teel tool case
•S
upplied with male Parker type quick-connect fitting assembled to tool
Uses CD-920 color-coded crimping dies. Dies must be purchased separately, see page E.19. PG-1 in-line
pressure gauge provides visual measurement of hydraulic output pressure, sold separately, see page E.24.
*For information on hydraulic pump and hose, see page E.18.
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 17
For service and technical support, call 800-777-3300.
E.17
7/25/16 7:56 AM
Tool Solutions
Hydraulic Pump and Accessories, Electric, 5000 PSI
A.
Cable
Ties
●●Develops 5,000 psi of hydraulic pressure
●●Convenient 120 VAC operation
●●Factory set relief valve, pump stops when crimp
is complete
●●Versatile, can be used with Panduit CT-930LPCH or
CT-980LPCH crimp heads
●●Easy to operate using manual switch or remote pendant
supplied; or optional CT-901RFS foot switch
Part Number
CT-902HP-5K
B.
Stainless
Steel
Part Description
Hydraulic pump. Develops 5,000 psi output. Pump shuts off when cycle is
complete. Will not release until down switch is activated. Compatible with
CT-900LPHPH hydraulic hose, CT-930LPCH, and CT-980LPCH crimp
heads sold separately.*
Std.
Pkg.
Qty.
1
Specifications:
Pump output: 5000 psi
Tank capacity: 2.5L incorporates sight gauge for visual inspection of
fluid level
Fluid type: Aero Shell #4 or equal
Motor: 120 VAC 50/50Hz
Current: 6.5 Amps
Horsepower: 1/2 hp
Warranty: 1 year
CT-900LPHPH
Weight: 34 lbs.
Length: 7"
Height: 14"
Width: 6"
C.
Wiring
Duct
CT-902RFS
CT-900LPHPH
D.
Terminals
and
Reel
Smart™
System
●●Incorporates Parker type quick-connect fittings to ease
installation and save time
CT-902RFS
CT-8250HP pump includes:
• On/off pendant switch on 10' electric cord
• Three prong A/C plug on 10' electric cord
• Supplied with male Parker type quick-connect fitting assembled to pump
Electrically non-conductive 10' hose compatible with Panduit CT-8250HP
hydraulic pump and CT-930LPCH and CT-980LPCH crimp heads,
supplied pre-filled with hydraulic fluid for fast start up. Supplied with two
female Parker type quick-connect fittings. Warranty: 1 year.
Dual electrical foot switch that allows convenient “hands free” operation of
the Panduit CT-901HP or CT-8250HP electric hydraulic pumps used with
Panduit remote hydraulic crimp heads. Supplied with 10' electric cord that
can be directly connected to Panduit hydraulic pumps. Warranty: 1 year.
1
1
*For more information on crimp heads, see pages E.17 and E.23.
PG-1 in-line pressure gauge provides visual measurement of hydraulic output pressure, sold separately, see
page E.24.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.18
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 18
7/25/16 7:56 AM
Power Connectors and Grounding
CD-920 Crimping Dies
●●Color-coded for easy matching to color-coding marked
on connectors
●●Embosses die index number on connector barrels for post
crimp inspection
Part Number
CD-920-8
CD-920-6
CD-920-4
Copper
Die Color
and Die No.
Red P21
Blue P24
Gray P29
CD-920-2
CD-920-1
CD-920-1/0
CD-920-2/0
Brown P33
Green P37
Pink P42
Black P45
Orange P50
Purple P54
Yellow P62
CD-920-300
White P66
300 kcmil
CD-920-350
Red P71
350 kcmil
CD-920-400
Blue P76
400 kcmil
CD-920-500
Brown P87
500 kcmil
CD-920-600
CD-920-500A
Green P94
Pink P99
600 kcmil
500 kcmil
CD-920-750
Black P106
750 kcmil
CD-930H
●●Provides circumferential crimp results in terminations with
premium electrical and mechanical performance
Used to Install Panduit Compression Lug and Splice Sizes
Copper Code
and Flex
Copper Flex Copper Metric
Copper Code Conductor Size
Conductor
Class 2r
Aluminum
Conductor
for LCAX, LCBX, Size for LCAF,
Conductor
Die Color
Size
LCDX, LCCX
LCCF, SCSF
Size
and Die No.
#8 AWG
#8 AWG
#8 AWG
10mm2
—
#6 AWG
#6 AWG
#6 AWG
16mm2
—
#4 AWG STR
#4 AWG
#4 AWG
Gray P29
#3 AWG STR #5, #4, #3 AWG
25mm2
35mm2
#2 AWG SOL
DLO flex
#2 AWG
#2 AWG
#2 AWG
—
—
Green P37
#1 AWG
#1 AWG
—
50mm2
1/0 AWG
1/0 AWG
#1 AWG
—
Pink P42
2/0 AWG
2/0 AWG
1/0 AWG
70mm2
Gold P45
CD-920-3/0
CD-920-4/0
CD-920-250
CD-920
●●Part number permanently marked on crimping die for
easy identification
3/0 AWG
4/0 AWG
250 kcmil
Part Number
CD-920H-6
CD-920H-2
CD-920H-250
CD-920-BG
CD-920-C
CD-920-D3
CD-920-O
Part Number
CD-930G-1/0
CD-930G-250
CD-930G-500
3/0 AWG
4/0 AWG
250 kcmil flex
262 kcmil flex
—
300
313
350
373
444
450
kcmil
kcmil
kcmil
kcmil
kcmil
kcmil
—
500 kcmil
535 kcmil
600 kcmil
—
flex
flex
flex
flex
flex
flex
flex
flex
flex
2/0 AWG
3/0 AWG
4/0 AWG
250
262
300
313
350
373
444
450
kcmil
kcmil
kcmil
kcmil
kcmil
kcmil
kcmil
kcmil
—
500 kcmil
535 kcmil
flex
flex
flex
flex
flex
flex
flex
flex
flex
flex
646 kcmil flex
Aluminum
Code
Conductor
Size
—
—
#6 AWG
Std.
Pkg.
Qty.
1
1
1
—
#4 AWG
#2 AWG
1
1
1
—
95mm2
120mm2
Tan P50
Olive P54
Ruby P62
#1 AWG
1/0 AWG
2/0 AWG
3/0 AWG
150mm2
White P66
4/0 AWG
1
—
Red P71
250 kcmil
1
185mm2
Blue P76
300 kcmil
1
240mm2
Brown P87
350 kcmil
1
300mm2
—
Green P94
Pink P99
400 kcmil
500 kcmil
1
1
400mm2
Black P106
600 kcmil
1
Used to Install Panduit Tap Part Numbers
Copper Die Color
and Die No.
Copper Tap
Orange PH6
HTCT6X-6X-1
Brown PH2
HTCT2-2-1
Purple PH25
HTCT250-2-1, HTCT250-250-1
PBG
CTAP4-8-L, CTAP4-6-L, CTAP4-4-L
PC
CTAP2-4-Q, CTAP2-2-X
PD3
CTAP4/0-2-X, CTAP4/0-2/0-X, CTAP4/0-4/0-X
PO
CTAP2/0-2-X, CTAP2/0-2/0-X
Std.
No. of Pkg.
Crimps Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Used to Install StructuredGround™ Direct Burial Grounding
Connector Part Numbers
Copper Die Color
and Die No.
Copper Tap
Red PG10
GCE1/0-1/0, GCC6X61/0-1/0
Black PG25
GCE250-1/0, GCE250-250, GCC6X6250-1/0,
GCC6X6250-250, GPC4H250-2
Blue PG50
1
1
1
1
GCE500-1/0, GCE500-250, GCC6X6500-1/0,
GCC6X6500-250
Std.
Pkg.
Qty.
1
1
1
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
CD-930G
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 19
For service and technical support, call 800-777-3300.
E.19
7/25/16 7:56 AM
Tool Solutions
CD-940 Crimping Dies
A.
Cable
Ties
B.
Stainless
Steel
●●Color-coded for easy matching to color-coding marked
on connectors
●●Embosses die index number on connector barrels for post
crimp inspection
Part Number
CD-940-750
CD-940-800
CD-940-1000
CD-940-750X
CD-940-750A
CD-940-800A
CD-940-1000A
●●Part number permanently marked on crimping die for
easy identification
●●Provides circumferential crimp results in terminations with
premium electrical and mechanical performance
Used to Install Panduit Compression Lug and Splice Sizes
Copper Code
and Flex
Copper Flex Copper Metric
Copper
Copper Code Conductor Size
Conductor
Class 2r
Aluminum
Die Color
Conductor
for LCAX, LCBX, Size for LCAF,
Conductor
Die Color
and Die No.
Size
LCDX, LCCX
LCCF, SCSF
Size
and Die No.
Black P106
750 kcmil
—
646 kcmil
400mm2
—
Orange P107
800 kcmil
—
777 kcmil
—
—
White P125
1000 kcmil
—
—
500mm2
—
630mm2
Yellow P115
—
777.7 kcmil flex
—
—
—
—
—
—
—
—
Red P125
—
—
—
—
—
Gray P140
—
—
—
—
—
Brown P161
C.
Wiring
Duct
Part Number
CD-940-DA
Aluminum
Code
Conductor
Size
—
—
—
Std.
Pkg.
Qty.
1
1
1
—
750 kcmil
800 kcmil
1000 kcmil
1
1
1
1
Part Description
Die adapter for use with Panduit CT-940CH and CT-2940 crimping tools
required for installation of Panduit CD-920 and CD-930 crimping dies in
these tools.
Std.
Pkg.
Qty.
1
CD-940
D.
Terminals
and
Reel
Smart™
System
CD-940-DA
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.20
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 20
7/25/16 7:56 AM
Power Connectors and Grounding
Uni-Die™ Dieless, Manual Hydraulic, 6.2 Ton, Crimping Tool
●●Dieless crimping tool design eliminates purchase or lost
crimping dies, saves cost
●●Develops 6.2 tons of crimping force with four point
indenter system, crimps copper compression lugs and
splices up to 750 kcmil
●●Two-stage rapid advance hydraulic system minimizes
number of pumps required to complete a crimp
●●High quality, durable tool construction provides
long-term dependability
●●Cushioned grips prevent hands from slipping on tool,
reduces fatigue
●●Provides UL Listed and CSA Certified connections on
Panduit ® Pan-Lug™ Copper Lugs and Splices
●●Provides UL Listed and CSA Certified wire range-taking
capability on Panduit ® Pan-Lug™ Copper Lugs and
Splices, minimizes connector inventory and saves cost
●●Flip-top crimp head design allows easy loading of
connectors, saves time
●●Audible “pop-off” valve indicates crimp completion
●●Crimp head rotates 360 degrees, provides versatility for
use in restricted spaces
●●Incorporates aluminum crimp head and fiberglass
handles, results in lightweight tool and ease of operation
Part Number
CT-980
A.
Cable
Ties
Part Description
Manual hydraulic Uni-Die™ Dieless Crimping Tool provides UL Listed
or Recognized and CSA Certified terminations of Panduit ® Pan-Lug™
Copper Compression Lugs and Splices for #4 AWG – 750 kcmil copper
code conductor.
B.
Stainless
Steel
Std.
Pkg.
Qty.
1
C.
Wiring
Duct
Specifications:
Output: 6.2 tons
Jaw opening: 1.46"
Weight: 10.5 lbs.
Length: 13"
Height: 12"
Width: 3"
Handle span: 15" (open), 5.75" (closed)
Warranty: 1 year
CT-980 includes:
• Tool
• Plastic tool case
CG-980 pressure gauge for measuring tool output force available, sold separately, see page E.24.
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 21
For service and technical support, call 800-777-3300.
E.21
7/25/16 7:56 AM
Tool Solutions
Uni-Die™ Dieless, Lithium-Ion Powered Hydraulic, 6.2 Ton, Crimping Tool
A.
Cable
Ties
●●Lithium-Ion battery powered, provides fingertip operation
and up to 135% more crimps per battery charge than
tools powered with NiCd or NiMH batteries
●●Dieless crimping tool design eliminates the cost of
crimping dies
●●Provides wire range-taking capability with Panduit copper
compression connectors, allows use of a minimum of lug
sizes to crimp a wide range of wire sizes
B.
Stainless
Steel
●●Aluminum alloy flip-top crimp head allows easy loading of
connectors and rotates 360°
●●Ergonomically balanced and lightweight for easy
operation without fatigue, weighs 11.75 lbs. with battery
●●Self-contained unit, completely portable
●●Develops 6.2 tons of crimping force, crimps copper
compression lugs and splices up to 750 kcmil, up to 183
crimps per battery charge when crimping Panduit 500
kcmil copper lugs
Part Number
CT-2980/L
C.
Wiring
Duct
Charger
Voltage
120 VAC
CT-2980/L and CT-2980/LE
CT-2980/LE
D.
Terminals
and
Reel
Smart™
System
230 VAC
FREE! Heavy-Duty Soft Sided
Tool Bag Included
●●Provides UL Listed and CSA Certified connections on
Panduit copper lugs and splices
●●Audible “pop-off” valve indicates crimp completion
●●Tool provided with two high capacity Lithium-Ion
14.4 VDC rechargeable batteries, battery charger,
shoulder strap, and tool bag
●●Batteries incorporate LED fuel gage so battery charge
level can be checked to allow for continuous operation
●●Approximately 3.5 second crimp cycle time provides
quick terminations, 25% faster than tools using NiCd or
NiMH batteries
●●Battery charger charges expended batteries completely
in 60 minutes
Part Description
Terminates Panduit Compression Connectors:
• Copper compression lugs and splices for #4 AWG –
750 kcmil code conductor
Specifications:
Output: 6.2 tons (56 Kn)
Jaw opening: 1.50" (38.1mm)
Weight: 11.75 lbs. (8.3 kg) with battery
Length: 14.75" (374.7mm), Height: 15" (381mm), Width:
3" (76.2mm)
Warranty: 1 year on tool, batteries and charger
Tool includes:
• Two high capacity Lithium-Ion 14.4 VDC
rechargeable batteries
• One battery charger
• One shoulder strap
• Heavy-duty bag with storage for tool, batteries, and
charger; includes 58 pockets and a shoulder strap for
added convenience; 18"L x 7"W x 14"H*
Std.
Pkg.
Qty.
1
1
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.22
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 22
7/25/16 7:56 AM
Power Connectors and Grounding
Uni-Die™ Dieless, Remote Hydraulic, 6.2 Ton, Crimp Head
●●Dieless crimping tool design eliminates purchase or lost
crimping dies, saves cost
●●Develops 6.2 tons of crimping force when used with
10,000 psi hydraulic pump and hose, crimps copper
compression lugs and splices up to 750 kcmil
●●Incorporates Parker type quick-connect fittings to ease
installation and save time
Part Number
CT-980CH
●●Provides UL Listed and CSA Certified connections on
Panduit ® Pan-Lug™ Copper Lugs and Splices
●●Provides UL Listed and CSA Certified wire range-taking
capability on Panduit ® Pan-Lug™ Copper Lugs and
Splices, minimizes connector inventory and saves cost
A.
Cable
Ties
●●Flip-top crimp head design allows easy loading of splices,
saves time
Part Description
Remote hydraulic Uni-Die™ dieless crimp head provides UL Listed or
Recognized and CSA Certified terminations of Panduit ® Pan-Lug™
Copper Compression Lugs and Splices for #4 AWG – 750 kcmil copper
code conductor.
Std.
Pkg.
Qty.
1
B.
Stainless
Steel
Use with Panduit CT-901HP hydraulic pump and CT-900HPH 10'
hydraulic hose.*
Specifications:
Output: 6.2 tons
Jaw opening: 1.46"
Weight: 6.5 lbs.
Length: 10.5"
Height: 5.3"
Width: 2.5"
Warranty: 1 year
C.
Wiring
Duct
CT-980CH includes:
ool
•T
• Steel tool case
• Supplied with female Parker type quick-connect fitting assembled to tool
*CT-902RCH remote control handle available, offering one hand operation of crimp head with CT-902HP hydraulic
pump and CT-900HPH hose, sold separately, see page E.16. CG-980 crimp force measurement gauge available,
sold separately, see page E.24.
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 23
For service and technical support, call 800-777-3300.
E.23
7/25/16 7:56 AM
Tool Solutions
Pressure Gauges
A.
Cable
Ties
●●Provide easy visual reading of output force for hydraulic
crimping tools
●●Factory calibrated to provide accuracy and quality
assurance control of crimping tools in the field
Part Number
CG-920
B.
Stainless
Steel
CG-920
CG-940
CG-940
C.
Wiring
Duct
CG-980
CG-980
PG-1
D.
Terminals
and
Reel
Smart™
System
PG-1
PG-1SC
●●Easy-to-read crimp force tolerance zone for applicable
tools marked on gauge
●●Blank dies for fixture supplied with test gauge for easy
mounting and operation of gauge with crimping tool
Part Description
Compression gauge – used to measure crimping force generated by Panduit
crimping tools: CT-930, CT-930CH, CT-930LPCH, and CT-2930/L.
CG-920 includes:
•P
ressure gauge
•B
lank die set
•S
teel storage case
•W
arranty: 90 days
Compression gauge – used to measure output force generated by Panduit
crimping tools: CT-940CH and CT-2940/L.
CG-940 includes:
ressure gauge
•P
•B
lank die set
•S
teel storage case
•W
arranty: 90 days
Compression gauge – used to insure proper compression force for Uni-Die™
Dieless Crimping Tools: CT-980, CT-980CH, and CT-2980/L.
CG-980 includes:
•P
ressure gauge
•F
ixture for mounting gauge in crimping tool
•S
teel storage case
•W
arranty: 90 days
In-line pressure gauge provides visual identification of hydraulic output
pressure when used with CT-930CH, CT-940CH, and CT-980CH crimp
heads, CT-902HP pump and CT-900HPH hose. Includes steel storage case.
Warranty: 90 days
In-line pressure gauge provides visual identification of hydraulic output
pressure when used with Panduit CT-930LPCH and CT-980LPCH crimp
heads, CT-902HP-5K pump and CT-900LPHPH hose. Includes steel storage
case. Warranty: 90 days
Std.
Pkg.
Qty.
1
1
1
1
1
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.24
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 24
7/25/16 7:56 AM
Power Connectors and Grounding
Tooling Selection Guide for Panduit Tubular Ring Terminals
Tooling
Panduit
Part Number
S8-10R-Q
S8-14R-Q
S8-56R-Q
S8-38R-Q
S6-10R-E
S6-14R-E
S6-56R-E
S6-38R-E
S4-10R-E
S4-14R-E
S4-56R-E
S4-38R-E
S2-10R-X
S2-14R-X
S2-56R-X
S2-38R-X
S2-12R-X
S1/0-14R-X
S1/0-56R-X
S1/0-38R-X
S1/0-12R-X
S2/0-14R-X
S2/0-56R-X
S2/0-38R-X
S2/0-76R-X
S2/0-12R-X
S3/0-14R-5
S3/0-56R-5
S3/0-38R-5
S3/0-76R-5
S3/0-12R-5
S4/0-38R-5
S4/0-76R-5
S4/0-12R-5
S250-56R-5
S250-38R-5
S250-76R-5
S250-12R-5
A.
Cable
Ties
CT-930,
CT-930CH,
CT-920,
CT-920CH,
CT-2920,
CT-980,
CT-940CH,
CT-980CH,
CT-2930,
CT-2950,
CT-720
CT-2940
CT-2980
Panduit Die Part Number
Die Index Number
(Number of Crimps)
CD-720-1
CD-920-8
—
P21
P21
(1)
(1)
CD-2001-8
P21
(1)
P24
(2)
CD-720-1
P24
(1)
CD-920-6
P24
(1)
—
CD-2001-6
P24
(1)
P29
(2)
CD-720-1
P29
(1)
CD-920-4
P28
(1)
STD
(1)
CD-2001-4
P29
(1)
P37
(3)
CD-720-2
P37
(1)
CD-920-1
P37
(1)
STD
(1)
CD-2001-1
P37
(1)
—
CD-720-2
P42
(1)
CD-920-1/0
P42
(1)
STD
(1)
CD-2001-1/0
P42
(1)
—
CD-720-2
P45
(2)
CD-920-2/0
P45
(1)
STD
(1)
CD-2001-2/0
P45
(2)
—
CD-720-2
P50
(2)
CD-920-3/0
P50
(1)
STD
(1)
CD-2001-3/0
P50
(2)
CT-1700
P21
(2)
CT-2001,
CT-3001
—
CD-720-3
P54
(2)
CD-920-4/0
P54
(1)
STD
(1)
CD-2001-4/0
P54
(2)
—
CD-720-3
P62
(2)
CD-920-250
P62
(1)
STD
(1)
CD-2001-250
P62
(2)
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 25
For service and technical support, call 800-777-3300.
E.25
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
Types LCA, LCAN, LCD, LCDN and SCS
Die Part Number
How to read
this chart
CD-2001-6 Die Index
Color
For LCA6
Blue P24
Code
Number
lug and
(1)
CT-2001
crimping tool:
Number
Panduit (See Compression Connector Tools Selection Guide, Pages E.3 – E.5)
of Crimps
CT-920,
CT-920CH,
CT-930,
Uni-Die™
CT-930CH,
Dieless
CT-930LPCH,
CT-980,
CT-2920,
CT-2980,
CT-2930,
CT-2980/L,
CT-2001,
CT-2930/L,
CT-2980/LE,
CT-2930/LE, CT-980LPCH, CT-2001/L,
CT-2001/LE,
CT-980CH,
CT-2931,
CT-2950
,
CT-2002,
CT-940CH,
CT-2002/L,
CT-2981
CT-2940
,
CT-3001, TBM20S,
Extended
CT-2940/L
,
CT-3001/E TBM25S
CT-2940/LE
Wire Range
B.
Stainless
Steel
Panduit
Part
Number
L = Lug
S = Splice
LCA10
LCD10
C.
Wiring
Duct
LCA8
LCAN8
LCD8
LCDN8
Std.
Wire
Size
#14 – #10
AWG STR,
#12 – #10
AWG SOL
D.
Terminals
and
Reel
Smart™
System
SCS4
LCA2
LCAN2
LCD2
LCDN2
7/8
#6 AWG
#2 AWG
7/8
SCS2
E.
Power
Connectors
and
Grounding
LCA1
LCAN1
LCD1
LCDN1
#1 AWG
E.26
LCA3/0
LCAN3/0
LCD3/0
LCDN3/0
—
—
—
—
—
—
—
—
Red P21
(2)
CD-720-1
Red P21
(1)
CD-920-8
Red P21
(1)
—
CD-2001-8
Red P21
(1)
Red
21
(2)
Red
21
(1)
Red
21
(1)
—
—
CD-720-1
Blue P24
Blue P24
(2)
(1)
CD-920-6
Blue P24
(1)
—
CD-2001-6
Blue P24
(1)
Blue
24
(2)
Blue
24
(1)
Blue
24
(1)
—
—
Gray
P29
(2)
CD-720-1
Gray P29
(1)
CD-920-4
Gray P29
(1)
#4 – #2 AWG
CD-2001-4
#2 AWG
Gray P29
SOL Only
(1)
(1)
Gray
29
(2)
Gray
29
(1)
Gray
29
(1)
—
—
Brown
P33
(2)
CD-720-1
Brown
P33
(1)
CD-920-2
Brown P33
(1)
#6 – #2 AWG
(1)
Brown
33
(2)
Brown
33
(1)
Brown
33
(1)
—
—
Green
P37
(3)
CD-720-2
Green
P37
(1)
CD-920-1
Green P37
(1)
CD-2001-1
#6 – #1 AWG
Green P37
(1)
(1)
—
Green
37
(1)
Green
37
(1)
—
—
—
CD-720-2
Pink P42
(1)
CD-920-1/0
Pink P42
(1)
#6 – 1/0
AWG
(1)
CD-20011/0
Pink P42
(1)
—
Pink
42
(1)
Pink
42
(1)
—
—
—
CD-720-2
Black
P45
(2)
CD-920-2/0
Black P45
(2)
#4 – 2/0
AWG
(1)
CD-20012/0
Black P45
(2)
—
Black
45
(2)
Black
45
(1)
—
CD-720-2
Orange
P50
(2)
CD-920-3/0
Orange P50
(2)
#2 – 3/0
AWG
(1)
CD-20013/0
Orange
P50
(2)
—
7/8
1
1/0 AWG
7/8
2/0 AWG
SCS2/0
F.
Part
Number
Index
15/16
SCS1/0
LCA2/0
LCAN2/0
LCD2/0
LCDN2/0
—
7/8
SCS1
LCA1/0
LCAN1/0
LCD1/0
LCDN1/0
—
13/16
15/16
1-1/16
15/16
3/0 AWG
1-3/16
SCS3/0
1
and Die Index Number/(Number of Crimps)
P10
(1)
13/16
#4 – #3
AWG
STR,
#2 AWG
SOL
TBM6,
TBM6S,
25000,
TBM5, TBM12,
TBM8 13642M
12-10
(1)
11/16
SCS6
LCA4
LCAN4
LCD4
LCDN4
5/8
#8 AWG
SCS8
LCA6
LCAN6
LCD6
LCDN6
Wire
Strip CT-1570 CT-1701 CT-1700 CT-720
Length
(In.)
Die Part Number/Color Code
7/16
Thomas & Betts
—
—
The CT-1700 and CT-1701 crimp die pockets are integrated into the tool frame.
CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.
Maximum size: 500 kcmil lugs and 250 kcmil splices.
Maximum size: 250 kcmil lugs and splices. No extended wire range.
CD-2001-2
Brown
P33
(1)
Orange Orange
50
50
(2)
(1)
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 26
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
A.
Cable
Ties
Types LCA, LCAN, LCD, LCDN and SCS (continued)
Thomas & Betts
Burndy
TBM14M,
TBM8-750M-1,
TBM15,
TBM14BSCR,
TBM8-750,
Y2MR,
TBM15I,
TBM8-750BSCR, BPLT14BSCR, Y1MR,
TBM15BSCR TBM750BSCR
13100A
Y1MRTC MY29
–
–
Red 21
(1)
BAT35,
Y39BH,
Y35BH,
Y750,
Y750BH,
Y750-2,
Y750HS,
Y750BH-2,
Y39,
PAT750,
Y35,
BAT750
Anderson
PennUnion
Greenlee
B.
Stainless
Steel
Y45,
Y46
Y644M,
Y644HS,
PAT644,
BAT644,
Y644MBH
VC6
TDY-1
1989
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
–
–
–
–
–
–
–
–
–
STD
(1)
Red 21
(1)
Red 49
(1)
#8
(1)
U8CRT
Red 49
(1)
U8CRT
Red 49
(1)
–
–
–
–
Blue 24
(1)
STD
(1)
Blue 24
(1)
Blue 7
(2)
#6
(1)
U5CRT
Blue 7
(1)
U5CRT
Blue 7
(1)
STD
(1)
STD
(1)
–
–
Gray 29
(1)
STD
(1)
Gray 29
(1)
Gray 8
(2)
#4
(1)
U4CRT
Gray 8
(1)
U4CRT
Gray 8
(1)
STD
(1)
STD
(1)
–
STD
(1)
Brown 33
(1)
STD
(1)
Brown 33
(1)
Brown
10
(2)
#2
(1)
U2CRT
Brown 9
[solid]/
Brown 10
[stranded]
(1)
U2CRT
Brown 9
[solid]/
Brown 10
[stranded]
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Green
37
(1)
STD
(1)
Green 37
(1)
–
#1
(1)
U1CRT
Green 11
(1)
U1CRT
Green 11
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Pink 42H
(2)
STD
(1)
Pink 42HÁ
(2)
–
1/0
(1)
U25RT
Pink 12
(1)
U25RT
Pink 12
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Black 45
(1)
STD
(1)
Black 45
(1)
–
2/0
(1)
U26RT
Black 13
(1)
U26RT
Black 13
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Orange
50
(1)
STD
(1)
Orange 50
(1)
–
3/0
(1)
U27RT
Orange 14
(1)
U27RT
Orange 14
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Half width dies.
Requires U die adapter.
Minimum size: #4 AWG lugs and splices.
Continues on next page
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 27
For service and technical support, call 800-777-3300.
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.27
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
For use with
Copper
Conductors
E.28
Types LCA, LCAN, LCD, LCDN and SCS (continued)
Panduit (See Compression Connector Tools Selection Guide,
Pages E.3 – E.5)
Panduit
Part
Number
L = Lug
S = Splice
LCA4/0
LCAN4/0
LCD4/0
LCDN4/0
SCS4/0
LCA250
LCAN250
LCD250
LCDN250
SCS250
LCA300
LCAN300
LCD300
LCDN300
SCS300
LCA350
LCAN350
LCD350
LCDN350
SCS350
LCA400
LCAN400
LCD400
LCDN400
SCS400
LCA500
LCAN500
LCD500
LCDN500
SCS500
LCA600
LCAN600
LCD600
LCDN600
SCS600
LCA750
LCAN750
LCD750
LCDN750
SCS750
F.
Part
Number
Index
Installation Tooling and Die Selections for:
LCD1000
SCS1000
Std.
Wire
Size
4/0 AWG
Wire
Strip
Length
(In.)
1-1/4
Thomas & Betts
CT-720
CT-920,
CT-920CH,
CT-930,
CT-930CH,
CT-930LPCH,
CT-2920,
CT-2930,
CT-2930/L,
CT-2930/LE,
CT-2931,
CT-940CH,
CT-2940,
CT-2940/L,
CT-2940/LE
CD-720-3
Purple P54
(2)
CD-920-4/0
Purple P54
(2)
1 – 4/0 AWG
(1)
CD-2001-4/0
Purple 54
(2)
Purple 54
(2)
Purple 54
(2)
Purple 54
(1)
CD-720-3
Yellow P62
(2)
CD-920-250
Yellow P62
(2)
1/0 AWG –
250 kcmil
(2)
CD-2001-250
Yellow P62
(2)
Yellow 62
(2)
Yellow 62
(2)
Yellow 62
(1)
CD-720-4
White P66
(2)
CD-920-300
White P66
(2)
2/0 AWG –
300 kcmil
(2)
CD-2001-300
White P66
(2)
—
White 66
(2)
White 66H
(1)
CD-720-5
Red P71
(2)
CD-920-350
Red P71
(2)
3/0 AWG –
350 kcmil
(2)
CD-2001-350
Red P71
(2)
—
Red 71
(2)
Red 71H
(2)
CD-720-6
Blue P76
(2)
CD-920-400
Blue P76
(2)
#6 – #2 AWG
(1)
CD-2001-400
Blue P76
(3)
—
Blue 76
(2)
Blue 76H
(2)
CD-720-7
Brown P87
(2)
CD-920-500
Brown P87
(2)
#6 – #1 AWG
(1)
CD-2001-500
Brown P87
(3)
—
Brown 87
(2)
Brown 87H
(2)
—
CD-920-600
Green P94
(2)
250 – 600 kcmil
(2)
—
—
—
Green 94H
(2)
—
CD920-750
CD-940-750
Black P106
(2)
500 – 750 kcmil
(2)
—
—
—
Black 106H
(2)
—
CD-940-1000
White P125
(4)
—
—
—
—
—
CT-980,
CT-2980,
CT-2980/L,
CT-2980/LE
CT-980LPCH
CT-980CH,
CT-2950
,
CT-2981
Extended
Wire Range
CT-2001,
CT-2001/L,
CT-2001/LE,
CT-2002,
CT-2002/L,
CT-3001,
CT-3001/E
TBM5
TBM6,
TBM6S,
25000,
TBM8
TBM12,
13642M
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
1
250 kcmil
1-5/16
1-1/16
300 kcmil
1-1/2
1-1/16
350 kcmil
1-1/2
1-1/8
400 kcmil
1-9/16
1-3/16
500 kcmil
1-13/16
1-3/8
600 kcmil
1-13/16
1-3/8
750 kcmil
1-15/16
1-5/8
1000 kcmil
1-15/16
1-7/8
Half width dies.
CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.
CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
Maximum size: 500 kcmil lugs and 250 kcmil splices.
Maximum size: 250 kcmil lugs and splices. No extended wire range.
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 28
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
A.
Cable
Ties
Types LCA, LCAN, LCD, LCDN and SCS (continued)
Thomas & Betts
Burndy
TBM14M,
TBM8-750M-1,
TBM15,
TBM14BSCR,
TBM8-750,
Y2MR,
TBM15I,
TBM8-750BSCR, BPLT14BSCR, Y1MR,
TBM15BSCR TBM750BSCR
13100A
Y1MRTC
MY29
Anderson
BAT35,
Y39BH,
Y35BH,
Y750,
Y750BH,
Y750-2,
Y750HS,
Y750BH-2,
Y39,
PAT750,
Y35,
BAT750
Y45,
Y46
PennUnion
Greenlee
B.
Stainless
Steel
Y644M,
Y644HS,
PAT644,
BAT644,
Y644MBH
VC6
TDY-1
1989
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
Purple 54H
(2)
–
4/0
(1)
U28RT
Purple 15
(1)
U28RT
Purple 15
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Yellow 62
(1)
–
250
(1)
U29RT
Yellow 16
(1)
U29RT
Yellow 16
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
White 66
(1)
STD
(1)
White 66
(1)
–
–
U30RT
White 17
(2)
U30RT
White 17
(2)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Red 71H
(2)
STD
(1)
Red 71H
(2)
–
–
U31RT
Red 18
(2)
U31RT
Red 18
(2)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Blue 76H
(2)
STD
(1)
Blue 76
(1)
–
–
U32RT
Blue 19
(2)
U32RT
Blue 19
(2)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Brown 87H
(2)
STD
(1)
Brown 87H
(2)
–
–
U34RT
Brown 20
(2)
U34RT
Brown 20
(2)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Purple 54H
(2)
STD
(1)
Yellow 62
(1)
Green 94H
(2)
STD
(1)
Green
94H
(2)
–
–
U36RT
Green 22
(2)
U36RT
Green 22
(2)
STD
(1)
–
STD
(1)
–
Black 106H
(2)
STD
(1)
Black 106H
(2)
–
–
U39RT
Black 24
(3)
U39RT
Black 24
(3)
STD
(1)
–
STD
(1)
–
125H
(2)
–
125H
(2)
–
–
–
S44RT
White 27
(4)
–
–
–
–
Half width dies.
Requires U die adapter.
Minimum size: #4 AWG lugs and splices.
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 29
For service and technical support, call 800-777-3300.
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.29
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper
Conductors
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
Types LCB, LCBN, LCC, LCCN and SCL
Die Part Number
How to read
this chart
For LCB6 Color CD-2001-6
Blue P24
Code
lug and
(2)
CT-2001
crimping
Number
Die Index
tool:
of Crimps
B.
Stainless
Steel
Installation Tooling and Die Selections for:
Panduit
Part
Number
Std.
Wire
Size
Number
Wire
Strip
Length
(In.)
L = Lug
S = Splice
LCB10
#14 – #10
LCC10
AWG STR,
9/16
#12 – #10
AWG SOL
LCB8
LCBN8
3/4
LCC8
#8 AWG
LCCN8
SCL8
1-1/16
LCB6
LCBN6
LCC6
#6 AWG
1-1/8
LCCN6
SCL6
LCB4
#4 – #3
LCBN4
AWG STR,
LCC4
1-1/8
#2 AWG
LCCN4
SOL
SCL4
LCB2
LCBN2
LCC2
#2 AWG
1-1/4
LCCN2
SCL2
LCB1
LCBN1
1-7/16
LCC1
#1 AWG
LCCN1
SCL1
1-3/8
LCB1/0
LCBN1/0
1-1/2
LCC1/0
1/0 AWG
LCCN1/0
SCL1/0
1-3/8
LCB2/0
LCBN2/0
1-9/16
LCC2/0
2/0 AWG
LCCN2/0
SCL2/0
1-1/2
LCB3/0
LCBN3/0
1-9/16
LCC3/0
3/0 AWG
LCCN3/0
SCL3/0
1-1/2
LCB4/0
LCBN4/0
LCC4/0
4/0 AWG 1-5/8
LCCN4/0
SCL4/0
LCB250
LCBN250
1-11/16
LCC250
250 kcmil
LCCN250
SLC250
1-5/8
Panduit (See Compression Connector Tools Selection Guide, Pages E.3 – E.5)
Thomas & Betts
CT-920,
CT-920CH,
CT-930,
Uni-Die™
CT-930CH,
CT-980,
CT-2920,
CT-980CH,
CT-2930,
CT-2950
,
CT-2930/L,
CT-2980,
CT-2001,
CT-2930/LE,
CT-2980/L, CT-2001/L,
CT-2931,
TBM6,
CT-2980/LE, CT-2001/LE
CT-930LPCH,
TBM6S,
CT-2002,
CT-2981,
CT-940CH, CT-980LPCH, CT-2002/L,
25000,
CT-2940,
CT-3001, TBM20S,
TBM5, TBM12,
Extended
CT-2940/L,
CT-1570 CT-1701 CT-1700 CT-720
Wire Range CT-3001/E TBM25S TBM5 TBM8 13642M
CT-2940/LE
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
12-10
(2)
P10
(2)
—
—
—
—
—
—
Gray
P29
(3)
CD-720-1
Gray P29
(2)
—
—
Brown
P33
(3)
—
—
Green
P37
(4)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CD-720-1
Red P21
Red P21
(3)
(2)
CD-920-8
Red P21
(1)
—
CD-2001-8
Red P21
(2)
Red
21
(3)
Red
21
(1)
Red
21
(1)
Red
21
(1)
CD-720-1
Blue P24
Blue P24
(3)
(2)
CD-920-6
Blue P24
(1)
—
CD-2001-6
Blue P24
(2)
Blue
24
(3)
Blue
24
(1)
Blue
24
(1)
Blue
24
(1)
CD-920-4
Gray P29
(1)
#4 – #2 AWG
CD-2001-4
#2 AWG
Gray P29
SOL Only
(2)
(1)
Gray
29
(2)
Gray
29
(1)
Gray
29
(1)
Gray
29
(1)
CD-720-1
Brown
P33
(2)
CD-920-2
Brown P33
(1)
#6 – #2 AWG
(1)
Brown
33
(1)
Brown
33
(1)
Brown
33
(1)
CD-720-2
Green
P37
(2)
CD-920-1
Green P37
(1)
CD-2001-1
#6 – #1 AWG
Green P37
(1)
(2)
—
Green
37
(1)
Green
37
(1)
Green
37
(1)
—
CD-2001CD-720-2 CD-920-1/0
#6 – 1/0 AWG
1/0
Pink P42
Pink P42
(2)
Pink P42
(2)
(2)
(2)
—
Pink
42
(2)
Pink
42
(2)
Pink
42
(2)
—
CD-720-2
CD-2001CD-920-2/0
Black
#4 – 2/0 AWG
2/0
Black P45
P45
(2)
Black P45
(3)
(3)
(3)
—
Black
45
(3)
Black
45
(3)
Black
45
(2)
—
CD-720-2
CD-920-3/0
Orange
#2 – 3/0 AWG
Orange P50
P50
(2)
(3)
(3)
CD-20013/0
Orange
P50
(3)
—
Orange Orange Orange
50
50
50
(3)
(3)
(2)
—
CD-720-3
CD-920-4/0
Purple
#1 – 4/0 AWG
Purple P54
P54
(2)
(3)
(3)
CD-20014/0
Purple
P54
(3)
—
Purple
54
(3)
—
CD-720-3
CD-920-250
Yellow
Yellow P62
P62
(3)
(4)
CD-2001250
Yellow
P62
(3)
—
Yellow Yellow Yellow
62
62
62
(4)
(4)
(2)
1/0 AWG –
250 kcmil
(3)
CD-2001-2
Brown
Brown
33
P33
(2)
(2)
Purple Purple
54
54
(3)
(2)
The CT-1700 and CT-1701 crimp die pockets are integrated into the tool frame; CD-920 dies can be used with CT-940CH and CT-2940 tools with
CD-940-DA adapter;
Maximum size: 500 kcmil lugs and 250 kcmil splices; Maximum size: 250 kcmil lugs and splices. No extended wire range.
E.30
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 30
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
A.
Cable
Ties
Types LCB, LCBN, LCC, LCCN and SCL (continued)
Thomas & Betts
Burndy
Y35, Y35BH,
Y39, Y39BH,
Y750,
Y750-2,
Y750BH,
Y750HS,
TBM8-750M-1,
TBM14M,
Y750BH-2,
TBM15,
TBM8-750,
TBM14BSCR,
Y2MR,
PAT750,
TBM15I,
TBM750BSCR, BPLT14BSCR, Y1MR,
BAT750,
TBM15BSCR TBM8-750BSCR
13100A
Y1MRTC MY29
BAT35
–
–
Red
21
(1)
Anderson
PennUnion
Greenlee
Y45,
Y46
Y644M,
Y644HS,
Y644MBH,
PAT644,
BAT644
VC6
TDY-1
1989
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
–
–
–
–
–
–
–
–
–
STD
(1)
Red
21
(1)
Red
49
(2)
#8
(1)
U8CRT
Red 49
(1)
U8CRT
Red 49
(1)
–
–
–
–
Blue
24
(1)
STD
(1)
Blue
24
(1)
Blue
7
(2)
#6
(1)
U5CRT
Blue 7
(1)
U5CRT
Blue 7
(1)
STD
(1)
STD
(1)
–
–
Gray
29
(1)
STD
(1)
Gray
29
(1)
Gray
8
(2)
#4
(1)
U4CRT
Gray 8
(1)
U4CRT
Gray 8
(1)
STD
(1)
STD
(1)
–
STD
(1)
Brown
33
(1)
STD
(1)
Brown
33
(1)
Brown
10
(2)
#2
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Green
37
(1)
STD
(1)
Green
37
(1)
–
#1
(1)
U1CRT
Green 11
(2)
U1CRT
Green 11
(2)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Pink
42H
(4)
STD
(2)
Pink
42H
(4)
–
1/0
(2)
U25RT
Pink 12
(2)
U25RT
Pink 12
(2)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Black
45
(2)
STD
(2)
Black
45
(2)
–
2/0
(2)
U26RT
Black 13
(2)
U26RT
Black 13
(2)
STD
(1)
STD
(1)
STD
(1)
STD
(1)
Orange
50
(2)
STD
(2)
Orange
50
(2)
–
3/0
(2)
U27RT
Orange 14
(2)
U27RT
Orange 14
(2)
STD
(1)
STD
(2)
STD
(1)
STD
(1)
Purple
54H
(4)
STD
(2)
Purple
54H
(4)
–
4/0
(2)
U28RT
Purple 15
(2)
U28RT
Purple 15
(2)
STD
(1)
STD
(2)
STD
(1)
STD
(1)
Yellow 62
(2)
STD
(2)
Yellow 62
(2)
–
250
(2)
U29RT
Yellow 16
(2)
U29RT
Yellow 16
(2)
STD
(1)
STD
(2)
STD
(1)
STD
(1)
U2CRT
U2CRT
Brown 9
Brown 9
(solid)/
(solid)/
Brown 10
Brown 10
(stranded) (2) (stranded) (2)
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
Half width dies; Requires U die adapter; Minimum size: #4 AWG lugs and splices.
Continues on next page
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 31
For service and technical support, call 800-777-3300.
E.31
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
Types LCB, LCBN, LCC, LCCN and SCL (continued)
Panduit (See Compression Connector Tools
Selection Guide, Pages E.3 – E.5)
Panduit
Part Number
L = Lug
S = Splice
LCB300
LCBN300
LCC300
LCCN300
SCL300
LCB350
LCBN350
LCC350
LCCN350
SCL350
LCB400
LCBN400
LCC400
LCCN400
SCL400
LCB500
LCBN500
LCC500
LCCN500
SCL500
LCB600
LCBN600
LCC600
LCCN600
SCL600
LCB750
LCBN750
LCC750
LCCN750
SCL750
LCB800
LCBN800
LCC800
LCCN800
LCB1000
LCBN1000
LCC1000
LCCN1000
SCL1000
Std.
Wire
Size
300 kcmil
Wire
Strip
Length
(In.)
2-5/16
2
350 kcmil
2-5/16
2
400 kcmil
2-3/8
2-1/8
500 kcmil
2-9/16
2-1/4
600 kcmil
2-3/4
CT-720
CT-920,
CT-920CH,
CT-930,
CT-930CH,
CT-2920,
CT-2930,
CT-2930/L,
CT-2930/LE,
CT-2931,
CT-930LPCH,
CT-940CH,
CT-2940,
CT-2940/L,
CT-2940/LE
Uni-Die™
CT-980,
CT-980CH,
CT-2950
CT-2980,
CT-2980/L,
CT-2980/LE,
CT2981,
CT-980LPCH
Extended
Wire Range
CT-2001,
CT-2001/L
CT-2001/LE
CT-2002
CT-2002/L
CT-3001,
CT-3001/E
CD-720-4
White P66
(4)
CD-920-300
White P66
(3)
2/0 AWG –
300 kcmil
(3)
CD-720-5
Red P71
(4)
CD-920-350
Red P71
(3)
CD-720-6
Blue P76
(4)
TBM6,
TBM6S,
25000
TBM8
TBM12,
13642M
CD-2001-300
White P66
(3)
White 66
(4)
White 66
(4)
3/0 AWG –
350 kcmil
(3)
CD-2001-350
Red P71
(3)
Red 71
(4)
Red 71H
(4)
CD-920-400
Blue P76
(3)
4/0 AWG –
400 kcmil
(3)
CD-2001-400
Blue P76
(4)
Blue 76
(4)
Blue 76H
(4)
CD-720-7
Brown P87
(4)
CD-920-500
Brown P87
(3)
4/0 AWG –
500 kcmil
(3)
CD-2001-500
Brown P87
(4)
Brown 71
(4)
Brown 87H
(4)
—
CD-920-600
Green P94
(4)
250 – 600
kcmil
(3)
—
—
Green 94H
(4)
—
CD-920-750
CD-940-750
Black P106
(4)
500 – 750
kcmil
(3)
—
—
Black 106H
(4)
—
CD-940-800
Orange P107
(4)
—
—
—
—
—
CD-940-1000
White P125
(4)
—
—
—
Yellow 125H
(4)
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
2-11/16
750 kcmil
2-15/16
2-7/8
800 kcmil
1000 kcmil
3
3-1/16
Thomas & Betts
3
Half width dies.
CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.
CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
Maximum size: 500 kcmil lugs and 250 kcmil splices.
Maximum size: 250 kcmil lugs and splices. No extended wire range.
Maximum size: 500 kcmil lugs and splices.
F.
Part
Number
Index
E.32
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 32
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
A.
Cable
Ties
Types LCB, LCBN, LCC, LCCN and SCL (continued)
Thomas & Betts
Burndy
Y35, Y35BH,
Y39, Y39BH,
Y750,
Y750-2,
Y750BH,
Y750HS,
Y750BH-2,
PAT750,
BAT750,
BAT35
Y45,
Y46
Anderson
Penn-Union
Greenlee
B.
Stainless
Steel
Y644M,
Y644HS,
Y644MBH,
PAT644,
BAT644
VC6
TDY-1
1989
U30RT
White 17
(3)
STD
(1)
STD
(3)
STD
(2)
STD
(1)
U31RT
Red 18
(3)
U31RT
Red 18
(3)
STD
(1)
STD
(3)
STD
(2)
STD
(1)
Blue 76
(4)
U32RT
Blue 19
(3)
U32RT
Blue 19
(3)
STD
(1)
STD
(3)
STD
(2)
STD
(1)
Brown 87
(4)
U34RT
Brown 20
(3)
U34RT
Brown 20
(3)
STD
(1)
STD
(3)
STD
(2)
STD
(1)
TBM15,
TBM15I,
TBM15BSCR
TBM8-750M-1,
TBM8-750,
TBM750BSCR,
TBM8-750BSCR
TBM14M,
TBM14BSCR,
BPLT14BSCR,
13100A
White 66
(3)
STD
(3)
White 66
(3)
U30RT
White 17
(3)
Red 71
(4)
STD
(3)
Red 71
(4)
Blue
(4)
STD
(3)
Brown 87
(4)
STD
(3)
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
Green 94
(4)
STD
(4)
Green 94
(4)
U36RT
Green 22
(4)
U36RT
Green 22
(4)
STD
(1)
—
STD
(4)
—
Black 106
(4)
STD
(4)
Black 106
(4)
U39RT
Black 24
(5)
U39RT
Black 24
(5)
STD
(1)
—
STD
(4)
—
—
—
—
—
—
—
—
—
—
125
(4)
—
125
(4)
—
S44RT
White 27
(6)
—
—
—
—
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
Half width dies.
Requires U die adapter.
Minimum size: #4 AWG lugs and splices.
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 33
For service and technical support, call 800-777-3300.
E.33
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
Types LCAX, LCAXN, LCBX, LCDX, LCDXN and LCCX
Die Part Number
How to read
this chart
CD-2001-6 Die Index
For LCAX6 Color
Blue P24
Code
Number
lug and
(1)
CT-2001
crimping tool:
Panduit (See Compression Connector Tools
Selection Guide, Pages E.3 – E.5)
Number
of Crimps
B.
Stainless
Steel
Std.
Wire
Size
Panduit
Part Number
LCAX8, LCDX8,
LCDXN8,
LCEX8, LCJX8
#8 AWG
LCBX8, LCCX8
C.
Wiring
Duct
LCAX6, LCDX6,
LCDXN6,
LCEX6, LCJX6
LCBX6, LCCX6
LCAX4, LCDX4,
LCDXN4,
LCEX4, LCJX4
LCBX4, LCCX4
D.
Terminals
and
Reel
Smart™
System
#6 AWG
LCAX2, LCDX2,
LCDXN2,
LCEX2, LCJX2
#4 AWG
#5, #4, #3
AWG
#4 AWG
#5, #4, #3
AWG
#2 AWG
LCBX2, LCCX2
LCAX1, LCDX1,
LCDXN1,
LCEX1, LCJX1
#1 AWG
LCBX1, LCCX1
E.
Power
Connectors
and
Grounding
LCAX1/0, LCDX1/0,
LCDXN1/0,
LCEX1/0, LCJX1/0
1/0 AWG
LCBX1/0, LCCX1/0
LCAX2/0, LCDX2/0,
LCDXN2/0,
LCEX2/0, LCJX2/0
2/0 AWG
LCBX2/0, LCCX2/0
LCAX3/0, LCDX3/0,
LCDXN3/0,
LCEX3/0, LCJX3/0
F.
Part
Number
Index
E.34
3/0 AWG
LCBX3/0, LCCX3/0
Cable Classes
Compact, B, G, H, I, K, M,
Locomotive (DLO)
Compact, B, G, H, I, K, M,
Locomotive (DLO)
Compact, B, G, H, I, K, M
Locomotive (DLO)
Compact, B, G, H, I, K, M
Locomotive (DLO)
Compact, B, G, H, I, K, M,
Locomotive (DLO)
Compact, B, G, H, I, K, M,
Locomotive (DLO)
Compact, B, G, H, I, K, M,
Locomotive (DLO)
Compact, B, G, H, I, K, M,
Locomotive (DLO)
Compact, B, G, H, I, K, M,
Locomotive (DLO)
Wire
Strip
Length
(In.)
CT-1700
CT-920, CT-920CH,
CT-2920, CT-930,
CT-930CH,
CT-2930, CT-2930/L,
CT-2930/LE, CT-2931,
CT-2001, CT-2001/L,
CT-2940,
CT-2001/LE, CT-2002,
CT-2940/L,
CT-2002/L, CT-3001,
CT-2940/LE,
CT-3001/E
CT-940CH
Die Part Number/Color Code and
Die Index Number (Number of Crimps)
Red P21
(2)
1/2
CD-2001-8
Red P21
(1)
CD-2001-8
Red P21
(2)
3/4
Red P21
(3)
9/16
Blue P24
(2)
1-1/8
Blue P24
(3)
CD-2001-6
Blue P24
(2)
5/8
Gray P29
(2)
CD-2001-4
Gray P29
(1)
1-1/8
Gray P29
(3)
CD-2001-4
Gray P29
(2)
11/16
Brown P33
(2)
CD-2001-2
Brown P33
(1)
1-7/16
Brown P33
(3)
3/4
—
1-1/2
3/4
—
1-9/16
7/8
—
1-9/16
1
—
1-5/8
The CT-1700 crimp die pockets are integrated into the tool frame.
CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.
Does not include Class K flex conductor with Burndy tools.
Does not include Class M flex conductor with Thomas and Betts tools.
Does not include Class K and M flex conductor with Thomas and Betts tools.
Does not include Class K flex conductor with Thomas and Betts tools.
CD-2001-6
Blue P24
(1)
CD-2001-2
Brown P33
(2)
CD-920-8
Red P21
(1)
CD-920-6
Blue P24
(1)
CD-920-4
Gray P29
(1)
CD-920-2
Brown P33
(1)
CD-2001-1
Green P37
(1)
CD-920-1
Green P37
(1)
CD-2001-1/0
Pink P42
(2)
CD-920-1/0
Pink P42
(1)
CD-2001-2/0
Black P45
(2)
CD-920-2/0
Black P45
(1)
CD-2001-1
Green P37
(2)
CD-2001-1/0
Pink P42
(3)
CD-2001-2/0
Black P45
(3)
CD-2001-3/0
Orange P50
(2)
CD-2001-3/0
Orange P50
(3)
CD-920-1
Green P37
(2)
CD-920-1/0
Pink P42
(3)
CD-920-2/0
Black P45
(3)
CD-920-3/0
Orange P50
(1)
CD-920-3/0
Orange P50
(3)
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 34
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
Thomas & Betts
TBM12
TBM8
TBM12D-1
Red 21
(1)
13461
Red 21
(1)
TBM12D-1
Red 21
(2)
TBM6, 25000
Burndy
TBM6BSCR,
TBM8-750,
TBM6H
TBM8-750M-1
13475 & 13477
Red 21
(1)
6TON21
Red 21
(1)
STD
(1)
13475 & 13477
Red 21
(2)
6TON21
Red 21
(2)
STD
(2)
13461
Blue 24
(2)
13475 & 13477
Blue 24
(2)
6TON24
Blue 24
(2)
STD
(2)
13461
Blue 24
(1)
TBM12D-2
Gray 29
(1)
13461
Gray 29
(1)
TBM12D-2
Gray 29
(3)
13461
Gray 29
(2)
TBM12D-2
Brown 33
(1)
13461
Brown 33
(1)
13475 & 13477
Blue 24
(1)
W4CRT
Gray 8
(1)
(1)
U4CRT
Gray 8
(1)
U4CRT
Gray 8
(2)
13474 & 13477
Brown 33
(1)
6TON33
Brown 33
(1)
STD
(1)
15528
Brown 33
(1)
W2CRT
Brown 10
(1)
(1)
U2CRT
Brown 10
(1)
STD
(3)
6TON45
Black 45
(3)
6TON50
Orange 50
(2)
STD
(3)
13462
Orange 50
(4)
Requires U die adapter.
Blue 7
(2)
(2)
6TON42
Pink 42
(3)
13462
Black 45
(4)
U5CRT
Blue 7
(2)
W4CRT
Gray 8
(2)
STD
(3)
13462
Pink 42
(3)
W5CRT
Blue 7
(2)
13474 & 13477
Green 37
(1)
13475 & 13477
Pink 42
(2)
13475 & 13477
Pink 42
(3)
13474 & 13477
Black 45
(2)
13474 & 13477
Black 45
(3)
13474 & 13477
Orange 50
(2)
13474 & 13477
Orange 50
(3)
6TON37
Green 37
(1)
STD
(1)
6TON42
Pink 42
(2)
STD
(1)
6TON45
Black 45
(2)
STD
(1)
6TON50
Orange 50
(3)
STD
(1)
STD
(3)
15528
Brown 33
(2)
(2)
W2CRT
Brown 10
(2)
(2)
W1CRT-1
Green 11
(2)
(2)
W25RT
Pink 12
(3)
(2)
W26RT
Black 13
(3)
W27RT
Orange 14
(2)
(2)
15513-CK
Green 37
(1)
W1CRT-1
Green 11
(1)
(1)
15508
Pink 42
(2)
W25RT
Pink 12
(2)
(1)
W26RT
Black 13
(2)
(1)
15513-CK
Green 37
(2)
15508
Pink 42
(3)
15526
Black 45
(1)
15526
Black 45
(2)
15530
Orange 50
(2)
15530
Orange 50
(3)
W27RT
Orange 14
(4)
(1)
(2)
U5CRT
Blue 7
(1)
U2CRT
Brown 10
(2)
U1CRT
Green 11
(1)
U1CRT
Green 11
(2)
U25RT
Pink 12
(1)
U25RT
Pink 12
(2)
U26RT
Black 13
(1)
U26RT
Black 13
(2)
U27RT
Orange 14
(1)
U27RT
Orange 14
(2)
Blue 7
(1)
2016_IEI_E_Grounding Connectors_TC_v4.indd 35
C.
Wiring
Duct
—
—
D.
Terminals
and
Reel
Smart™
System
—
—
—
E.
Power
Connectors
and
Grounding
—
Continues on next page
www.panduit.com
B.
Stainless
Steel
Red 49
(1)
Red 49
(2)
15527-CK
Gray 29
(2)
6TON37
Green 37
(2)
13462
Pink 42
(1)
15522
Blue 24
(2)
15522
Blue 24
(1)
MRC840
U8CRT
Red 49
(2)
STD
(3)
13474 & 13477
Green 37
(3)
13462
Orange 50
(2)
(1)
W8CRT
Red 49
(2)
6TON29
Gray 29
(2)
13462
Green 37
(3)
13462
Green 37
(1)
TBM12D-4
Org/Tan 50
(1)
TBM12D-4
Org/Tan 50
(3)
W5CRT
Blue 7
(1)
15520
Red 21
(2)
U8CRT
Red 49
(1)
13472 & 13476
Gray 29
(3)
TBM12D-3
Green 37
(3)
TBM12D-4
Blk/Gold 45
(3)
—
15527-CK
Gray 29
(1)
STD
(3)
13462
Black 45
(2)
W8CRT
Red 49
(1)
STD
(1)
6TON33
Brown 33
(2)
TBM12D-4
Blk/Gold 45
(1)
15520
Red 21
(1)
6TON29
Gray 29
(1)
13472 & 13476
Gray 29
(1)
13474 & 13477
Brown 33
(3)
TBM12D-3
Pink 42
(3)
BCT500HS,
Y500CT-HS
STD
(1)
13461
Brown 33
(3)
TBM12D-3
Pink 42
(1)
TBM14BSCR,
TBM14M,
TBM15
6TON24
Blue 24
(1)
TBM12D-2
Brown 33
(3)
TBM12D-1
Green 37
(1)
Y35, Y39, Y750,
Y46
, Y750-2,
Y750BH,
BAT35-14V,
BAT750-14V,
Y644M
Pat750-18V
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
13461
Red 21
(2)
TBM12D-1
Blue 24
(1)
TBM12D-1
Blue 24
(2)
A.
Cable
Ties
Types LCAX, LCAXN, LCBX, LCDX, LCDXN and LCCX (continued)
For service and technical support, call 800-777-3300.
F.
Part
Number
Index
E.35
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
B.
Stainless
Steel
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
Types LCAX, LCAXN, LCBX, LCDX, LCDXN and LCCX (continued)
Panduit (See Compression Connector Tools
Selection Guide, Pages E.3 – E.5)
Std.
Wire
Size
Panduit
Part Number
LCAX4/0, LCDX4/0,
LCDXN4/0,
LCEX4/0, LCJX4/0
4/0 AWG
LCBX4/0, LCCX4/0
C.
Wiring
Duct
E.36
1-1/16
—
2-5/16
CD-2001-4/0
Purple P54
(2)
CD-920-4/0
Purple P54
(1)
CD-2001-250
Yellow P62
(2)
CD-920-250
Yellow P62
(1)
CD-2001-4/0
Purple P54
(3)
CD-920-4/0
Purple P54
(3)
G, H, I, K, M,
1-1/16
LCBX250, LCCX250
262.6
kcmil
Locomotive (DLO)
2-5/16
LCAX300, LCDX300,
LCDXN300,
LCEX300, LCJX300
300 kcmil
G, H, I, K, M,
CD-2001-250
Yellow P62
(3)
CD-920-250
Yellow P62
(3)
1-1/4
CD-2001-350
Red P71
(2)
CD-920-350
Red P71
(2)
2-3/8
CD-2001-350
Red P71
(4)
CD-920-350
Red P71
(3)
1-3/8
CD-2001-400
Blue P76
(2)
CD-920-400
Blue P76
(2)
CD-2001-400
Blue P76
(4)
CD-920-400
Blue P76
(3)
313.1
kcmil
300 kcmil
—
Locomotive (DLO)
G, H, I, K, M,
—
313.1
kcmil
Locomotive (DLO)
350 kcmil
G, H, I, K, M,
373.7
kcmil
Locomotive (DLO)
350 kcmil
G, H, I, K, M,
373.7
kcmil
Locomotive (DLO)
450 kcmil
G, H, I, K, M,
444.4
kcmil
Locomotive (DLO)
450 kcmil
G, H, I, K, M,
Locomotive (DLO)
LCAX500, LCDX500,
LCDXN500,
LCEX500, LCJX500
444.4
kcmil
500 kcmil
G, H, I, K, M,
1-9/16
LCBX500, LCCX500
535.3
kcmil
Locomotive (DLO)
2-15/16
LCAX600, LCDX600,
LCDXN600,
LCEX600, LCJX600
600 kcmil
G, H, I
646.4
kcmil
777.7
kcmil
LCAX350, LCDX350,
LCDXN350,
LCEX350, LCJX350
LCBX350, LCCX350
LCAX450, LCDX450,
LCDXN450,
LCEX450, LCJX450
LCAX650, LCDX650,
LCDXN650,
LCEX650, LCJX650
F.
Part
Number
Index
Die Part Number/Color Code and
Die Index Number (Number of Crimps)
250 kcmil
LCBX450, LCCX450
E.
Power
Connectors
and
Grounding
Compact, B, G, H, I, K, M,
Locomotive (DLO)
CT-1700
LCAX250, LCAXN250,
LCDX250, LCDXN250,
LCEX250, LCJX250
LCBX300, LCCX300
D.
Terminals
and
Reel
Smart™
System
Cable Classes
Wire
Strip
Length
(In.)
CT-920, CT-920CH,
CT-2920, CT-930,
CT-930CH, CT-2930,
CT-2930/L,
CT-2930/LE, CT-2931,
CT-2001, CT-2001/L,
CT-2940,
CT-2001/LE, CT-2002,
CT-2940/L,
CT-2002/L, CT-3001,
CT-2940/LE,
CT-3001/E
CT-940CH
LCAX750, LCDX750,
LCDXN750,
LCEX750, LCJX750
—
2-9/16
1-7/16
—
—
CD-920-500
Brown P87
(2)
2-3/4
—
—
CD-920-500
Brown P87
(4)
—
—
1-9/16
—
—
Locomotive (DLO)
1-1/2
—
—
Locomotive (DLO)
1-3/4
—
—
CD-920-500A
Pink P99
(2)
CD-920-500A
Pink P99
(4)
CD-920-500A
Pink P99
(2)
CD-940-750
Black P106
(2)
CD-940-750X
Yellow
(2)
The CT-1700 crimp die pockets are integrated into the tool frame.
CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.
CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
Does not include Class M flex conductor with Thomas and Betts tools.
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 36
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
Thomas & Betts
TBM12
TBM12D-5
Purp/Olive 54
(1)
TBM12D-5
Purp/Olive 54
(4)
TBM8
TBM6, 25000
—
—
—
TBM12D-4
Blue 76H
(2)
TBM12D-4
Blue 76H
(4)
TBM12D-3
Brown 87H
(2)
TBM12D-3
Brown 87H
(4)
TBM12D-2
Pink 99H
(2)
TBM12D-2
Pink 99H
(4)
TBM12D-2
Pink 99H
(2)
TBM12D-2
Black 106H
(2)
TBM12D-1
Yellow
115H
(2)
TBM6BSCR,
TBM8-750,
TBM6H
TBM8-750M-1
TBM14BSCR,
TBM14M,
TBM15
BCT500HS,
Y500CT-HS
15511
Purple 54
(2)
W28RT
Purple 15
(2)
Y35, Y39, Y750,
Y46
, Y750-2,
Y750BH,
BAT35-14V,
BAT750-14V,
Y644M
PAT750-18V
—
—
—
6TON54
Purple 54
(2)
6TON54
Purple 54
(4)
STD
(1)
STD
(4)
U28RT
Purple 15
(3)
15510-CK
Yellow 62
(1)
W29RT
Yellow 16
(2)
(1)
U29RT
Yellow 16
(1)
6TON62
Yellow 62
(4)
STD
(4)
15510-CK
Yellow 62
(2)
W29RT
Yellow 16
(4)
(3)
U29RT
Yellow 16
(3)
—
6TON71
Red 71H
(4)
STD
(4)
15514-CK
Red 71H
(4)
W31RT
Red 18
(4)
(3)
—
—
MRC840
6TON71
Red 71H
(2)
STD
(2)
6TON76
Blue 76H
(2)
STD
(2)
6TON87
Brown 87H
(2)
STD
(2)
6TON76
Blue 76H
(4)
STD
(4)
6TON87
Brown 87H
(4)
STD
(4)
STD
(2)
—
—
—
STD
(2)
—
—
—
—
—
—
—
—
STD
(4)
15514-CK
Red 71H
(2)
15512
Blue 76H
(2)
15512
Blue 76H
(4)
15506
Brown 87H
(2)
15506
Brown 87H
(4)
15505
Pink 99H
(2)
15505
Pink 99H
(4)
15505
Pink 99H
(2)
15515-CK
Black 106H
(2)
15504
Yellow
115H
(2)
W31RT
Red 18
(2)
(1)
W32RT
Blue 19
(3)
(1)
W32RT
Blue 19
(4)
—
(3)
(1)
(4)
(1)
—
—
—
—
(4)
(1)
(1)
(1)
U31RT
Red 18
(2)
U31RT
Red 18
(4)
U32RT
Blue 19
(2)
U32RT
Blue 19
(4)
U34RT
Brown 20
(2)
U34RT
Brown 20
(4)
U38XRT
Pink L99
(2)
U38XRT
Pink L99
(4)
U38RT
Pink 400
(2)
U39RT
Black 24
(2)
U44XRT
Yellow L115
(2)
B.
Stainless
Steel
—
—
—
2016_IEI_E_Grounding Connectors_TC_v4.indd 37
(3)
STD
(1)
—
www.panduit.com
W28RT
Purple 15
(4)
U28RT
Purple 15
(1)
6TON62
Yellow 62
(2)
—
Half width dies.
Requires U die adapter.
15511
Purple 54
(4)
(1)
—
TBM12D-5
Yellow 62
(3)
TBM12D-4
Red 71H
(4)
Burndy
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
TBM12D-5
Yellow 62
(1)
TBM12D-4
Red 71H
(2)
A.
Cable
Ties
Types LCAX, LCAXN, LCBX, LCDX, LCDXN and LCCX (continued)
C.
Wiring
Duct
—
—
D.
Terminals
and
Reel
Smart™
System
—
—
—
E.
Power
Connectors
and
Grounding
—
—
F.
Part
Number
Index
For service and technical support, call 800-777-3300.
E.37
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper
Conductors
How to read
this chart
For RSC4-6
splice and
CT-2001
crimping tool
Installation Tooling and Die Selections for:
Type RSC In-Line Reducing Splice
Reducing from
Die Part Number
Color
Code
CD-2001-4
Gray P29
(1)
Reducing to
Die Part Number
Die Index
Number
Color
Code
Number
of Crimps
B.
Stainless
Steel
Panduit
Part Number
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.38
Number
of Crimps
Standard Wire Size
Cable Classes
#2 AWG
RSC2-4
#4 – #3 AWG STR,
#2 AWG SOL
B, C, Compact
Reducing To
Wire Strip Length
(In.)
Standard Wire Size
Cable Classes
Wire Strip Length
(In.)
1
#6 AWG
B, C, Compact
1
#6 AWG
B, C, Compact
1-5/16
#2 AWG
B, C, Compact
1
B, C, Compact
1-5/16
RSC1/0-6
1/0 AWG
B, C, Compact
1
#4 – #3 AWG STR,
#2 AWG SOL
#6 AWG
B, C, Compact
1-5/16
RSC1/0-4
1/0 AWG
B, C, Compact
1
B, C, Compact
1-5/16
RSC2/0-6
2/0 AWG
B, C, Compact
1-1/16
#4 – #3 AWG STR,
#2 AWG SOL
#6 AWG
B, C, Compact
1-5/16
RSC2/0-4
2/0 AWG
B, C, Compact
1-1/16
B, C, Compact
1-5/16
RSC4/0-6
4/0 AWG
B, C, Compact
1-1/16
#4 – #3 AWG STR,
#2 AWG SOL
#6 AWG
B, C, Compact
1-5/16
RSC4/0-4
4/0 AWG
B, C, Compact
1-1/16
B, C, Compact
1-5/16
RSC4/0-1/0
4/0 AWG
B, C, Compact
1-1/16
#4 – #3 AWG STR,
#2 AWG SOL
1/0 AWG
B, C, Compact
1-9/16
RSC4/0-2/0
4/0 AWG
B, C, Compact
1-1/16
2/0 AWG
B, C, Compact
1-7/16
RSC500-X4/0
500 kcmil
B, C, Compact
1-7/8
4/0 AWG
I
1-7/16
RSC500-X350
500 kcmil
B, C, Compact
1-7/8
350 kcmil
I
1-7/8
RSC750-4/0
750 kcmil
B, C, Compact
2
4/0 AWG
B, C, Compact
1-5/8
RSC750-X4/0
750 kcmil
B, C, Compact
2
4/0 AWG
I
1-7/16
RSC750-X350
750 kcmil
B, C, Compact
2
350 kcmil
I
1-7/8
RSC750-500
750 kcmil
B, C, Compact
2
500 kcmil
B, C, Compact
1-7/8
RSC750-X500
750 kcmil
B, C, Compact
2
500 kcmil
I
2
RSC750-750
750 kcmil
B, C, Compact
2
750 kcmil
B, C, Compact
2
RSCX750-4/0
750 kcmil
I
2
4/0 AWG
B, C, Compact
1-5/8
RSCX750-750
750 kcmil
I
2
750 kcmil
B, C, Compact
2
RSC2-6
D.
Terminals
and
Reel
Smart™
System
Die Index
Number
Reducing From
RSC4-6
C.
Wiring
Duct
CD-2001-6
Blue P24
(1)
B, C, Compact
1-5/16
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 38
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
A.
Cable
Ties
Type RSC In-Line Reducing Splice (continued)
Panduit (See Compression Connector Tools Selection Guide, Pages E.3 – E.5)
CT-1700
CT-930
, CT-930CH
, CT-920,
CT-920CH, CT-2920, CT-2940,
CT-2001, CT-2001/L,
CT-2940/L, CT-2940/LE,
CT-2001/LE, CT-2002, CT-2002/L, CT-940CH, CT-2930
, CT-2930/L,
CT-3001, CT-3001/E
CT-2930/LE
, CT-2931
CT-720
Reducing From
Reducing To
Reducing From
Reducing To
Reducing From
Reducing To
Reducing From
Reducing To
Gray P29
(2)
Blue P24
(2)
CD-720-1
Gray P29 (1)
CD-720-1
Blue P24 (1)
CD-2001-4
Gray P29 (1)
CD-2001-6
Blue P24 (1)
CD-920-4
Gray P29 (1)
CD-920-6
Blue P24 (1)
CD-720-1
Brown P33 (1)
CD-720-1
Gray P29 (1)
CD-2001-2
Brown P33 (1)
CD-2001-4
Gray P29 (1)
CD-920-2
Brown P33 (1)
CD-920-4
Gray P29 (1)
CD-720-2
Pink P42 (1)
CD-720-1
Gray P29 (1)
CD-2001-1/0
Pink P42 (1)
CD-2001-4
Gray P29 (1)
CD-920-1/0
Pink P42 (1)
CD-920-4
Gray P29 (1)
CD-720-2
Black P45 (2)
CD-720-1
Gray P29 (1)
CD-2001-2/0
Black P45 (2)
CD-2001-4
Gray P29 (1)
CD-920-2/0
Black P45 (1)
CD-920-4
Gray P29 (1)
CD-720-3
Purple P54 (2)
CD-720-1
Gray P29 (1)
CD-2001-4/0
Purple P54 (2)
CD-2001-4
Gray P29 (1)
CD-920-4/0
Purple P54 (1)
CD-920-4
Gray P29 (1)
CD-720-3
Purple P54 (2)
CD-720-2
Black P45 (2)
CD-2001-4/0
Purple P54 (2)
CD-2001-2/0
Black P45 (2)
CD-920-4/0
Purple P54 (1)
CD-920-2/0
Black P45 (2)
CD-2001-400
Blue P76 (3)
CD-920-500
Brown P87 (2)
Brown P33
(2)
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
Brown P33
(2)
Blue P24
(2)
Gray P29
(2)
CD-720-1
Brown P33 (1)
—
—
CD-720-2
Pink P42 (1)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CD-720-2
Black P45 (2)
CD-720-3
Purple P54 (2)
CD-720-3
Purple P54 (2)
CD-720-1
Blue P24 (1)
CD-2001-2
Brown P33 (1)
CD-720-1
Blue P24 (1)
CD-2001-1/0
Pink P42 (1)
CD-720-1
Blue P24 (1)
CD-720-1
Blue P24 (1)
CD-720-2
Pink P42 (2)
CD-720-7
Brown P87 (2)
—
CD-720-7
Brown P87 (2)
CD-720-3
Yellow P62 (2)
—
—
—
CD-2001-2/0
Black P45 (2)
CD-2001-4/0
Purple P54 (2)
CD-2001-4/0
Purple P54 (2)
CD-2001-6
Blue P24 (1)
CD-920-2
Brown P33 (1)
CD-2001-6
Blue P24 (1)
CD-920-1/0
Pink P42 (1)
CD-2001-6
Blue P24 (1)
CD-920-2/0
Black P45 (1)
CD-2001-6
Blue P24 (1)
CD-920-4/0
Purple P54 (1)
CD-2001-1/0
Pink P42 (2)
CD-920-4/0
Purple P54 (1)
CD-720-6
Blue P76 (2)
CD-2001-500
Brown P87 (3)
CD-2001-500
Brown P87 (3)
CD-2001-250
Yellow P62 (2)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
The CT-1700 crimp die pockets are integrated into the tool frame.
CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.
CD-940 dies to be used with CT-940CH and CT-2940 tools.
Maximum conductor size: 500 kmcil Class I and 750 kcmil Class I, B, C, Compact.
Maximum conductor size: 250 kmcil Class I and 400 kcmil Class I, B, C, Compact.
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 39
CD-920-6
Blue P24 (1)
CD-920-6
Blue P24 (1)
CD-920-6
Blue P24 (1)
CD-920-1/0
Pink P42 (2)
CD-920-250
Yellow P62 (2)
CD-920-750,
CD-940-750
Black P106 (2)
CD-920-4/0
Purple P54 (1)
CD-920-750,
CD-940-750
Black P106 (2)
CD-920-750,
CD-940-750
Black P106 (2)
CD-920-750,
CD-940-750
Black P106 (2)
CD-920-750,
CD-940-750
Black P106 (2)
CD-940-750X
Yellow P115 (2)
CD-940-750X
Yellow P115 (2)
C.
Wiring
Duct
CD-920-6
Blue P24 (1)
CD-920-500
Brown P87 (2)
CD-920-750,
CD-940-750
Black P106 (2)
B.
Stainless
Steel
CD-920-400
Blue P76 (2)
D.
Terminals
and
Reel
Smart™
System
CD-920-250
Yellow P62 (1)
CD-920-400
Blue P76 (2)
CD-920-500
Brown P87 (2)
E.
Power
Connectors
and
Grounding
CD-920-500A
Pink P99 (2)
CD-920-750,
CD-940-750
Black P106 (2)
CD-920-4/0
Purple P54 (1)
CD-940-750
Black P106 (2)
Continues on next page
For service and technical support, call 800-777-3300.
F.
Part
Number
Index
E.39
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
Type RSC In-Line Reducing Splice (continued)
Reducing From
Panduit
Part Number
Standard Wire Size
Cable Classes
#2 AWG
RSC2-4
RSC4-6
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
B, C, Compact
Wire Strip Length
(In.)
Standard Wire Size
Cable Classes
Wire Strip Length
(In.)
1
#6 AWG
B, C, Compact
1
#6 AWG
B, C, Compact
1-5/16
#2 AWG
B, C, Compact
1
B, C, Compact
1-5/16
RSC1/0-6
1/0 AWG
B, C, Compact
1
#4 – #3 AWG STR,
#2 AWG SOL
#6 AWG
B, C, Compact
1-5/16
RSC1/0-4
1/0 AWG
B, C, Compact
1
B, C, Compact
1-5/16
RSC2/0-6
2/0 AWG
B, C, Compact
1-1/16
#4 – #3 AWG STR,
#2 AWG SOL
#6 AWG
B, C, Compact
1-5/16
RSC2/0-4
2/0 AWG
B, C, Compact
1-1/16
B, C, Compact
1-5/16
RSC4/0-6
4/0 AWG
B, C, Compact
1-1/16
#4 – #3 AWG STR,
#2 AWG SOL
#6 AWG
B, C, Compact
1-5/16
RSC4/0-4
4/0 AWG
B, C, Compact
1-1/16
B, C, Compact
1-5/16
RSC4/0-1/0
4/0 AWG
B, C, Compact
1-1/16
#4 – #3 AWG STR,
#2 AWG SOL
1/0 AWG
B, C, Compact
1-9/16
RSC4/0-2/0
4/0 AWG
B, C, Compact
1-1/16
2/0 AWG
B, C, Compact
1-7/16
RSC500-X4/0
500 kcmil
B, C, Compact
1-7/8
4/0 AWG
I
1-7/16
RSC500-X350
500 kcmil
B, C, Compact
1-7/8
350 kcmil
I
1-7/8
RSC750-4/0
750 kcmil
B, C, Compact
2
4/0 AWG
B, C, Compact
1-5/8
RSC750-X4/0
750 kcmil
B, C, Compact
2
4/0 AWG
I
1-7/16
RSC750-X350
750 kcmil
B, C, Compact
2
350 kcmil
I
1-7/8
RSC750-500
750 kcmil
B, C, Compact
2
500 kcmil
B, C, Compact
1-7/8
RSC750-X500
750 kcmil
B, C, Compact
2
500 kcmil
I
2
RSC750-750
750 kcmil
B, C, Compact
2
750 kcmil
B, C, Compact
2
RSCX750-4/0
750 kcmil
I
2
4/0 AWG
B, C, Compact
1-5/8
RSCX750-750
750 kcmil
I
2
750 kcmil
B, C, Compact
2
RSC2-6
#4 – #3 AWG STR,
#2 AWG SOL
Reducing To
B, C, Compact
1-5/16
F.
Part
Number
Index
E.40
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 40
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
A.
Cable
Ties
Type RSC In-Line Reducing Splice (continued)
Burndy
Y1MR, Y2MR
Reducing From
Y35, Y35BH, Y39, Y39BH, Y45, Y46,
Y750, Y750HS, Y750-2, Y750BH-2,
BAT35, BAT750, PAT644, PAT750
Y1MRTC
Reducing To
Reducing From
Reducing To
Reducing From
Reducing To
Gray (2)
Blue (3)
White (2)
Blue (3)
U4CR
Gray 8 (1)
U5CRT
Blue 7 (1)
Brown (2)
Blue (3)
Brown (2)
Blue (3)
Brown (2)
Gray (3)
Brown (2)
White (3)
U2CRT
Brown 10 (1)
U4CRT
Gray 8 (1)
—
—
—
—
—
—
—
—
U25RT
Pink 12 (1)
U4CRT
Gray 8 (1)
—
—
—
—
—
—
—
—
U26RT
Black 13 (1)
U4CRT
Gray 8 (1)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
U2CRT
Brown 10 (1)
U25RT
Pink 12 (1)
U26RT
Black 13 (1)
U28RT
Purple 15 (1)
U28RT
Purple 15 (1)
U28RT
Purple 15 (1)
U28RT
Purple 15 (1)
U5CRT
Blue 7 (1)
U5CRT
Blue 7 (1)
U5CRT
Blue 7 (1)
U5CRT
Blue 7 (1)
U4CRT
Gray 8 (1)
U26RT
Black 13 (1)
U29RT
Yellow 16 (1)
U39RT
Black 24 (3)
U28RT
Purple 15 (1)
U32RT
Blue 19 (2)
U39RT
Black 24 (3)
U29RT
Yellow 16 (1)
U39RT
Black 24 (3)
U34RT
Brown 20 (2)
—
U39RT
Black 24 (3)
U39RT
Black 24 (3)
—
—
—
—
—
—
—
—
U39RT
Black 24 (3)
U39RT
Black 24 (3)
C.
Wiring
Duct
U25RT
Pink 12 (2)
U34RT
Brown 20 (2)
U34RT
Brown 20 (2)
B.
Stainless
Steel
U32RT
Blue 19 (2)
D.
Terminals
and
Reel
Smart™
System
U38XRT
Pink L99 (3)
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
Continues on next page
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 41
For service and technical support, call 800-777-3300.
E.41
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
Type RSC In-Line Reducing Splice (continued)
Reducing From
Panduit
Part Number
Standard Wire Size
Cable Classes
#2 AWG
RSC2-4
RSC4-6
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
B, C, Compact
Wire Strip Length
(In.)
Standard Wire Size
Cable Classes
Wire Strip Length
(In.)
1
6 AWG
B, C, Compact
1
6 AWG
B, C, Compact
1-5/16
#2 AWG
B, C, Compact
1
B, C, Compact
1-5/16
RSC1/0-6
1/0 AWG
B, C, Compact
1
4-3 AWG
2 Solid
6 AWG
B, C, Compact
1-5/16
RSC1/0-4
1/0 AWG
B, C, Compact
1
B, C, Compact
1-5/16
RSC2/0-6
2/0 AWG
B, C, Compact
1-1/16
4 – 3 AWG
2 Solid
6 AWG
B, C, Compact
1-5/16
RSC2/0-4
2/0 AWG
B, C, Compact
1-1/16
B, C, Compact
1-5/16
RSC4/0-6
4/0 AWG
B, C, Compact
1-1/16
4 – 3 AWG
2 Solid
6 AWG
B, C, Compact
1-5/16
RSC4/0-4
4/0 AWG
B, C, Compact
1-1/16
B, C, Compact
1-5/16
RSC4/0-1/0
4/0 AWG
B, C, Compact
1-1/16
4 – 3 AWG
2 Solid
1/0 AWG
B, C, Compact
1-9/16
RSC4/0-2/0
4/0 AWG
B, C, Compact
1-1/16
2/0 AWG
B, C, Compact
1-7/16
RSC500-X4/0
500 kcmil
B, C, Compact
1-7/8
4/0 AWG
I
1-7/16
RSC500-X350
500 kcmil
B, C, Compact
1-7/8
350 kcmil
I
1-7/8
RSC750-4/0
750 kcmil
B, C, Compact
2
4/0 AWG
B, C, Compact
1-5/8
RSC750-X4/0
750 kcmil
B, C, Compact
2
4/0 AWG
I
1-7/16
RSC750-X350
750 kcmil
B, C, Compact
2
350 kcmil
I
1-7/8
RSC750-500
750 kcmil
B, C, Compact
2
500 kcmil
B, C, Compact
1-7/8
RSC750-X500
750 kcmil
B, C, Compact
2
500 kcmil
I
2
RSC750-750
750 kcmil
B, C, Compact
2
750 kcmil
B, C, Compact
2
RSCX750-4/0
750 kcmil
I
2
4/0 AWG
B, C, Compact
1-5/8
RSCX750-750
750 kcmil
I
2
750 kcmil
B, C, Compact
2
RSC2-6
#4 – #3 AWG STR,
#2 AWG Solid
Reducing To
B, C, Compact
1-5/16
F.
Part
Number
Index
E.42
Continues on next page
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 42
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
A.
Cable
Ties
Type RSC In-Line Reducing Splice (continued)
Thomas & Betts
TBM20S, TBM25S
TBM5, TBM6, TBM8
TBM14BSCR, BPLT14BSCR,
13100A, TBM14M
TBM12, 13642M
Reducing From
Reducing To
Reducing From
Reducing To
Reducing From
Reducing To
Reducing From
Reducing To
Gray 29 (2)
Blue 24 (3)
Gray 29 (1)
Blue 24 (1)
Gray 29 (1)
Blue 24 (1)
Gray 29 (1)
Blue 24 (1)
Brown 33 (2)
Blue 24 (3)
Brown 33 (1)
Blue 24 (1)
Brown 33 (1)
Blue 24 (1)
Brown 33 (1)
Blue 24 (1)
Brown 33 (2)
Gray 29 (3)
Brown 33 (1)
Gray 29 (1)
Brown 33 (1)
Gray 29 (1)
Brown 33 (1)
Gray 29 (1)
—
—
Pink 42 (1)
Blue 24 (1)
Pink 42 (1)
Blue 24 (1)
Pink 42H (2)
Blue 24 (1)
—
—
Pink 42 (1)
Gray 29 (1)
Pink 42 (1)
Gray 29 (1)
Pink 42H (2)
Gray 29 (1)
—
—
Black 45 (2)
Blue 24 (1)
Black/Gold
45 (1)
Blue 24 (1)
Black 45 (1)
Blue 24 (1)
—
—
Black 45 (2)
Gray 29 (1)
Gray 29 (1)
Black 45 (1)
Gray 29 (1)
—
—
Purple 54 (2)
Blue 24 (1)
Blue 24 (1)
Olive 54H (2)
Blue 24 (1)
—
—
Purple 54 (2)
Gray 29 (1)
Gray 29 (1)
Olive 54H (2)
Gray 29 (1)
Pink 42 (2)
Olive 54H (2)
Pink 42H (4)
Black/Gold
45 (1)
Olive 54H (2)
Black 45 (1)
Yellow 62 (1)
Brown 87H (2)
Yellow 62 (1)
Blue 76H (2)
Brown 87H (2)
Blue 76 (1)
Purple/Olive
54 (1)
Black 106H (2)
Olive 54H (2)
Yellow 62 (1)
Black 106H (2)
Yellow 62 (1)
Blue 76H (2)
Black 106H (2)
Blue 76 (1)
Brown 87H
(2)
Black 106H (2)
Brown 87H (2)
Pink 99H (2)
Black 106H (2)
Pink 99H (2)
Color Code/Die Index Number/(Number of Crimps)
—
—
Purple 54 (2)
Pink 42 (2)
—
—
Purple 54 (2)
Black 45 (2)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Black/Gold
45 (1)
Purple/Olive
54 (1)
Purple/Olive
54 (1)
Purple/Olive
54 (1)
Purple/Olive
54 (1)
Brown 87H
(2)
Brown 87H
(2)
Black/Orange
106H (2)
Black/Orange
106H (2)
Black/Orange
106H (2)
Black/Orange
106H (2)
—
—
—
—
—
—
—
—
—
—
—
—
Black/Orange
106H (2)
Black/Orange
106H (2)
Black 106H (2)
Black 106H (2)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Black/Orange
106H (2)
Half width dies.
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 43
For service and technical support, call 800-777-3300.
E.43
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper
Conductors
How to read
this chart
For PSCBRN-L
parallel splice
and CT-2001
crimping tool
Installation Tooling and Die Selections for:
Type PSC
Die Part Number
Color
Code
CD-2001-2
Brown P33
(1)
Die Index
Number
Number
of Crimps
Panduit Crimping Tool Part Number
(See Compression Connector Tools Selection Guide, Pages E.3 – E.5)
B.
Stainless
Steel
Panduit Splice
Part Number
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
Wire Strip
Length
(In.)
Uni-Die™ Dieless
CT-980, CT-980CH,
CT-2950, CT-2980,
CT-2980/L, CT-2980/LE,
CT-2981
CT-2001, CT-2001/L,
CT-2001/LE, CT-2002,
CT-2002/L, CT-3001,
CT-3001/E
CT-920, CT-930, CT-2940*,
CT-2940/L*, CT-2940/LE*,
CT-920CH, CT-930CH, CT-940CH*,
CT-2920, CT-2930, CT-2930/L,
CT-2930/LE, CT-2931
CD-2001-8
Red P21
(1)
CD-920-8
Red P21
(1)
CD-2001-4
Gray P29
(1)
CD-920-4
Gray P29
(1)
Die Part Number/Color Code and
Die Index Number (Number of Crimps)
PSCRED-L
7/16
—
PSCBLU-L
7/16
—
PSCGRY-L
7/16
(1)
PSCBRN-L
1 1/16
(1)
PSCGRN-L
1 1/16
(1)
PSCPNK-L
1 1/16
(1)
PSCBLK-Q
7/8
(1)
PSCORG-Q
7/8
(1)
PSCPUR-Q
1
(1)
PSCYEL-Q
1 1/16
(1)
CD-2001-6
Blue P24
(1)
CD-920-6
Blue P24
(1)
CD-2001-2
Brown P33
(1)
CD-920-2
Brown P33
(1)
CD-2001-1/0
Pink P42
(1)
CD-920-1/0
Pink P42
(1)
CD-2001-1
Green P37
(1)
CD-2001-2/0
Black P45
(1)
CD-2001-3/0
Orange P50
(1)
CD-2001-4/0
Purple P54
(1)
CD-2001-250
Yellow P62
(1)
*CD-920 dies can be used with CT-940CH and CT-2940 tools with the CD-940-DA die adapter.
CD-920-1
Green P37
(1)
CD-920-2/0
Black P45
(1)
CD-920-3/0
Orange P50
(1)
CD-920-4/0
Purple P54
(1)
CD-920-250
Yellow P62
(1)
F.
Part
Number
Index
E.44
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 44
7/25/16 7:56 AM
Power Connectors and Grounding
Crimp Tools and Dies for Rigid Stranded Class 2r Conductor
Panduit
Part Number
LCMA6
LCMD6
LCMA10
LCMD10
SCMS10
LCMA16
LCMD16
SCMS16
LCMA25
LCMD25
SCMS25
LCMA35
LCMD35
SCMS35
LCMA50
LCMD50
SCMS50
LCMA70
LCMD70
SCMS70
LCMA95
LCMD95
SCMS95
LCMA120
LCMD120
SCMS120
LCMA150
LCMD150
SCMS150
LCMA185
LCMD185
SCMS185
LCMA240
LCMD240
SCMS240
LCMA300
LCMD300
SCMS300
LCMAX300
LCMDX300
SCMSX300
LCMA400
LCMD400
SCMS400
LCMA500
LCMD500
SCMS500
LCMA630
LCMD630
SCMS630
CT-200,
CT-1570
Copper
Conductor
Size (mm2)
and Class^
4-6
Class 2r
CT-100
22-10
(1)
12-10
(1)
10
Class 2r
—
—
16.0
16
Class 2r
—
—
—
16.5
25
Class 2r
—
—
19.0
35
Class 2r
—
21.8
50
Class 2r
24.8
Wire Strip
Length
(mm)
11.0
CT-600
CT-1701
CT-2001,
CT-2002,
CT-3001,
CT-3001/E‡
CT-2931, CT-930, CT-930CH,
CT-2930, CT-2930/L, CT-2930/LE‡,
CT-940CH*, CT-2940*,
CT-2940/L*, CT-2940/LE*‡
Die Part Number/Color Code and Index Number (Number of Crimps)
CT-570CH
12-10
(1)
—
P10 (1)
—
—
—
CD-2001-8
Red P21
(1)
CD-920-8
Red P21
(1)
—
CD-2001-8
Red P21
(1)
CD-920-8
Red P21
(1)
—
—
CD-2001-4
Gray P29
(1)
CD-920-4
Gray P29
(1)
—
—
—
CD-2001-4
Gray P29
(1)
CD-920-4
Gray P29
(1)
—
—
—
—
CD-2001-1
Green P37
(1)
CD-920-1
Green P37
(1)
70
Class 2r
—
—
—
—
CD-2001-2/0
Black P45
(2)
CD-920-2/0
Black P45
(2)
26.0
95
Class 2r
—
—
—
—
CD-2001-4/0
Purple P54
(2)
CD-920-4/0
Purple P54
(2)
26.0
120
Class 2r
—
—
—
—
CD-2001-250
Yellow P62
(2)
CD-920-500
Yellow P62
(2)
29.0
150
Class 2r
—
—
—
—
CD-2001-300
White P66
(2)
CD-920-300
White P66
(2)
29.7
185
Class 2r
—
—
—
—
CD-2001-400
Blue P76
(2)
CD-920-400
Blue P76
(2)
36.5
240
Class 2r
—
—
—
—
CD-2001-500
Brown P87
(2)
CD-920-500
Brown P87
(2)
41.8
300
Class 2r
—
—
—
—
—
CD-920-600
Green P94
(2)
46.3
—
—
—
—
—
—
—
46.3
46.3
49.0
48.0
48.0
49.5
57.7
57.7
67.0
400
Class 2r
—
—
—
—
—
CD-920-750, CD-940-750**
Black P106
(2)
500
Class 2r
—
—
—
—
—
CD-940-1000**
White P125
(3)
630
Class 2r
—
—
—
—
—
CD-940-1000**
White P125
(4)
12.5
*CD-920 and CDI-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA die adapter.
**CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
^Class 2r Rigid Stranded Metric Copper Conductor and Class 5f and 6f Flexible Stranded Metric Copper Conductor Per DIN VDE 0295, IEC 60228 and HD 383.
‡CE Approved crimp tool.
‡‡Nest die must be used in conjunction with specified indenter die.
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 45
A.
Cable
Ties
For service and technical support, call 800-777-3300.
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.45
7/25/16 7:56 AM
Tool Solutions
Crimp Tools and Dies for Flexible Stranded Class 5f/6f Conductor
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.46
CT-200,
CT-100 CT-1570
CT-600
CT-2931, CT-930,
CT-2001,
CT-930CH, CT-2930,
CT-2002, CT-2930/L, CT-2930/LE‡,
CT-3001,
CT-940CH*, CT-2940*,
CT-1701 CT-3001/E‡ CT-2940/L*, CT-2940/LE*‡
Copper
Conductor
Size (mm2)
and Class^
4-6
Class 5f
22-10
(1)
12-10
(1)
—
—
—
—
—
—
10
Class 5f
Class 6f
—
—
—
CD-920-8
Red P21
(1)
16
Class 5f
Class 6f
—
—
—
25
Class 5f
Class 6f
—
—
35
Class 5f
Class 6f
—
50
Class 5f
Class 6f
Die Part Number/Color Code and Index Number (Number of Crimps)
CT-570CH P10 (1)
12-10
(1)
—
—
CT-2931, CT-930, CT-930CH,
CT-2930, CT-2930/L, CT-2930/LE‡,
CT-940CH*, CT-2940*, CT-2940/L*,
CT-2940/LE*‡
Bottom Nest
Die‡‡
Part Number
Color Color and
Index Number
—
Crimps
Top Indenter
Per
Die
Connector
Nest/
Part Number
Indenter
Index
Dies
Number
—
—
—
—
—
CD-920-8
Red P21
(1)
CD-920-4NEST
Gray P29
CDI-920-10
(1)
(1)
CD-920-8
Red P21
(1)
CD-920-8
Red P21
(1)
CD-920-4NEST
Gray P29
CDI-920-10
(1)
(1)
—
CD-2001-4
Gray P29
(1)
CD-920-4
Gray P29
(1)
CD-9201/0NEST
Pink P42
CDI-920-24
(2)
(1)
—
—
CD-2001-2
Brown P33
(2)
CD-920-2
Brown P33
(2)
CD-920-3/0NEST
Orange P50
CDI-920-24
(2)
(1)
—
—
—
CD-2001-1
Green P37
(2)
CD-920-1
Green P37
(2)
CD-920-3/0NEST
Orange P50
CDI-920-24
(2)
(1)
70
Class 5f
Class 6f
—
—
—
CD-2001-2/0
Black P45
(2)
CD-920-2/0
Black P45
(2)
CD-920-250NEST
Yellow P62
CDI-920-48
(4)
(1)
95
Class 5f
Class 6f
—
—
—
CD-2001-3/0
Orange P50
(2)
CD-920-3/0
Orange P50
(2)
CD-920-400NEST
Blue P76
CDI-920-48
(4)
(1)
120
Class 5f
Class 6f
—
—
—
—
—
CD-920-400NEST
Blue P76
CDI-920-48
(4)
(1)
150
Class 5f
Class 6f
—
—
—
—
—
CD-920-400NEST
Blue P76
CDI-920-48
(4)
(1)
185
Class 5f
Class 6f
—
—
—
—
—
CD-920-500NEST
Brown P87
CDI-920-48
(4)
(1)
240
Class 5f
Class 6f
—
—
—
—
—
CD-920-750NEST
Black P106
CDI-920-60
(6)
(1)
300
Class 5f
—
—
—
—
—
CD-920-300MXNST
P32
CDI-920-60
(6)
(1)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
*CD-920 and CDI-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA die adapter.
^Class 2r Rigid Stranded Metric Copper Conductor and Class 5f and 6f Flexible Stranded Metric Copper Conductor Per DIN VDE 0295, IEC 60228 and HD 383.
‡CE Approved crimp tool.
‡‡Nest die must be used in conjunction with specified indenter die.
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 46
7/25/16 7:56 AM
Power Connectors and Grounding
Crimp Tools and Dies for Rigid Stranded Conductor
A.
Cable
Ties
CT-2931, CT-930, CT-930CH, CT-2930,
CT-2930/L, CT-2930/LE‡, CT-940CH*,
CT-2940*, CT-2940/L*, CT-2940/LE*‡
Copper
Conductor
Size (mm2)
and Class^
CT-2001, CT-2002, CT-3001, CT-3001/E‡
CD-2001-8
Red P21 (2)
CD-920-8
Red P21 (2)
28.8
16
Class 2r
CD-2001-8
Red P21 (2)
CD-2001-8
Red P21 (2)
28.3
25
Class 2r
CD-2001-4
Gray P29 (2)
CD-920-4
Gray P29 (2)
34.4
35
Class 2r
CD-2001-4
Gray P29 (2)
CD-920-4
Gray P29 (2)
38.2
50
Class 2r
CD-2001-1
Green P37 (2)
CD-920-1
Green P37 (2)
39.6
70
Class 2r
CD-2001-2/0
Black P45 (3)
CD-920-2/0
Black P45 (3)
44.6
95
Class 2r
CD-2001-4/0
Purple P54 (3)
CD-920-4/0
Purple P54 (3)
41.3
120
Class 2r
CD-2001-250
Yellow P62 (3)
CD-920-250
Yellow P62 (3)
58.6
150
Class 2r
CD-2001-300
White P66 (3)
CD-920-300
White P66 (3)
57.9
185
Class 2r
CD-2001-400
Blue P76 (3)
CD-920-400
Blue P76 (3)
65.1
240
Class 2r
CD-2001-500
Brown P87 (3)
CD-920-500
Brown P87 (3)
70
300
Class 2r
—
CD-920-600
Green P94 (3)
LCMBX300
74.6
—
—
—
LCMB400
66.8
400
Class 2r
—
CD-920-750, CD-940-750**
Black P106 (3)
LCMB500
77.8
400
Class 2r
—
CD-940-1000**
White P125 (4)
LCMB630
85.9
400
Class 2r
—
CD-940-1000**
White P125 (5)
Panduit
Part Number
LCMB10
LCMC10
LCMB16
Wire Strip
Length (mm)
25.6
LCMC16
LCMB25
LCMC25
LCMB35
LCMC35
LCMB50
LCMC50
LCMB70
LCMC70
LCMB95
LCMC95
LCMB120
LCMC120
LCMB150
LCMC150
LCMB185
LCMC185
LCMB240
LCMC240
LCMB300
LCMC300
LCMCX300
LCMC400
LCMC500
LCMC630
10
Class 2r
Die Part Number Color Code and Index Number (Number of Crimps)
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
*CD-920 and CDI-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA die adapter.
**CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
^Class 2r Rigid Stranded Metric Copper Conductor and Class 5f and 6f Flexible Stranded Metric Copper Conductor Per DIN VDE 0295, IEC 60228 and HD 383.
‡CE Approved crimp tool.
‡‡Nest die must be used in conjunction with specified indenter die.
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 47
For service and technical support, call 800-777-3300.
E.47
7/25/16 7:56 AM
Tool Solutions
Crimp Tools and Dies for Flexible Stranded Conductor
A.
Cable
Ties
CT-2001, CT-2002,
CT-3001, CT-3001/E‡
Copper
Conductor
Size (mm2)
and Class^
—
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
CT-2931, CT-930, CT-930CH,
CT-2930, CT-2930/L,
CT-2930/LE‡, CT-940CH*,
CT-2940*, CT-2940/L*,
CT-2940/LE*‡
Die Part Number Color Code and Index
Number (Number of Crimps)
CT-2931, CT-930, CT-930CH,
CT-2930, CT-2930/L,
CT-2930/LE‡, CT-940CH*,
CT-2940*, CT-2940/L*,
CT-2940/LE*‡
Bottom Nest Die‡‡
Part Number Color
Code,
Index Number
Top Indenter
Die Part
Number, Index
Number
Crimps Per
Connector
Nest/ Indenter
Dies
—
—
10
Class 5f
Class 6f
CD-2001-8
Red P21 (2)
CD-920-8
Red P21 (2)
—
—
—
CD-2001-8
Red P21 (2)
CD-920-8
Red P21 (2)
—
—
—
25
Class 5f
Class 6f
CD-2001-4
Gray P29 (2)
CD-920-4
Gray P29 (2)
—
—
—
35
Class 5f
Class 6f
CD-2001-2
Brown P33 (3)
CD-920-2
Brown P33 (3)
—
—
—
50
Class 5f
Class 6f
CD-2001-1
Green P37 (3)
CD-920-1
Green P37 (3)
—
—
—
70
Class 5f
Class 6f
CD-2001-2/0
Black P45 (3)
CD-920-2/0
Black P45 (3)
CD-920-250NEST
Yellow P62
CDI-920-48
(4)
(2)
95
Class 5f
Class 6f
CD-2001-3/0
Orange P50 (3)
CD-920-3/0
Orange P50 (3)
CD-920-400NEST
Blue P76
CDI-920-48
(4)
(2)
120
Class 5f
Class 6f
—
—
CD-920-400NEST
Blue P76
CDI-920-48
(4)
(2)
150
Class 5f
Class 6f
—
—
CD-920-400NEST
Blue P76
CDI-920-48
(4)
(2)
185
Class 5f
Class 6f
—
—
CD-920-500NEST
Brown P87
CDI-920-48
(4)
(2)
240
Class 5f
Class 6f
—
—
CD-920-750NEST
Black P106
CDI-920-60
(6)
(2)
300
Class 5f
—
—
CD-920-300MXNST
P32
CDI-920-60
(6)
(2)
—
—
—
—
—
—
—
—
—
—
—
—
1000 kcmil
Class G
—
CD-940-750A**
Red P125 (2)
—
—
—
16
Class 5f
Class 6f
—
—
—
CD-940-1000**
White P125 (3)
*CD-920 and CDI-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA die adapter.
**CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
^Class 2r Rigid Stranded Metric Copper Conductor and Class 5f and 6f Flexible Stranded Metric Copper Conductor Per DIN VDE 0295, IEC 60228 and HD 383.
‡CE Approved crimp tool.
‡‡Nest die must be used in conjunction with specified indenter die.
F.
Part
Number
Index
E.48
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 48
7/25/16 7:56 AM
Power Connectors and Grounding
Installation Tooling and Die Selections for:
For use with
Copper or
Aluminum
Conductors
How to read
this chart
For LAA6
and CT-2931
crimping tool
A.
Cable
Ties
Types LAA, LAB, and SA
Reducing from
Die Part Number
Color
Code
CD-920-4
Gray P29
(2)
Die Index
Number
Panduit (See Compression Connector Tools Selection Guide,
Pages E.3 – E.5)
Number
of Crimps
Panduit Splice
Part Number
L = Lug
S = Splice
Std.
Wire
Size
Wire Strip
Length
(In.)
SA6
#6
AWG
3/4
LAA6
LAA4
SA4
LAA2
SA2
LAA1
SA1
LAA1/0, LAB1/0
SA1/0
LAA2/0, LAB2/0
SA2/0
LAA3/0, LAB3/0
SA3/0
LAA4/0, LAB4/0
SA4/0
LAA250, LAB250
SA250
LAA300, LAB300
SA300
LAA350, LAB350
SA350
LAA400, LAB400
SA400
LAA500, LAB500
SA500
LAA600, LAB600
SA600
LAA750, LAB750
SA750
LAA800, LAB800
SA800
LAA1000, LAB1000
SA1000
1
#4
AWG
1-1/16
#2
AWG
1
#1
AWG
7/8
7/16
1
7/16
1/0
AWG
1-9/16
2/0
AWG
1-9/16
3/0
AWG
1-9/16
4/0
AWG
250 kcmil
300 kcmil
350 kcmil
400 kcmil
500 kcmil
600 kcmil
750 kcmil
800 kcmil
1000 kcmil
1
1-1/8
1-1/4
1-3/4
1-5/16
1-3/4
1-7/16
2-5/16
1-1/2
2-5/16
1-5/8
2-9/16
1-13/16
3-1/16
1-7/8
3-1/16
2
3-7/16
2-1/4
3-7/16
2-5/16
4-3/4
2-9/16
CT-1700
Gray
P29
(5)
Green
P37
(5)
—
—
—
—
—
—
—
—
—
CT-720
CT-930, CT-930CH, CT-920, CT-920CH,
CT-2920, CT-2930, CT-2930/L, CT-2930/LE,
CT-2931, CT-2940, CT-2940/L,
CT-2940/LE, CT-940CH
Die Part Number/Color Code and
Die Index Number (Number of Crimps)
CD-720-1
Gray P29
(2)
CD-720-2
Green P37
(2)
CD-720-2
Pink P42
(2)
CD-720-2
Gold P45
(3)
CD-720-2
Tan P50
(3)
CD-720-3
Olive P54
(3)
CD-720-3
Ruby P60
(4)
CD-720-4
White P66
(4)
CD-720-5
Red P71
(4)
CD-720-6
Blue P76
(4)
CD-720-7
Brown P87
(4)
—
—
—
—
—
—
—
—
—
—
—
—
CD-920-4
Gray P29
(2)
CD-920-1
Green P37
(2)
CD-920-1/0
Pink P42
(2)
CD-920-2/0
Gold P45
(2)
CD-920-3/0
Tan P50
(2)
CD-920-4/0
Olive P54
(2)
CD-920-250
Ruby P60
(2)
CD-920-300
White P66
(2)
CD-920-350
Red P71
(2)
CD-920-400
Blue P76
(2)
CD-920-500
Brown P87
(2)
CD-920-600
Green P94
(4)
CD-920-500A
Pink P99
(4)
CD-920-750, CD-940-750
Black P106
(4)
CD-940-750A
Red P125
(4)
CD-940-800A
Gray P140
(4)
CD-940-1000A
Brown P161
(4)
The CT-1700 crimp die pockets are integrated into the tool frame.
CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA die adapter. Maximum size splice is 250 kcmil with CT-920, CT-920CH,
and CT-2920 tools.
CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
Continues on next page
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 49
For service and technical support, call 800-777-3300.
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.49
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper or
Aluminum
Conductors
Installation Tooling and Die Selections for:
Types LAA, LAB, and SA (continued)
Thomas & Betts
Panduit Splice
Part Number
B.
Stainless
Steel
L = Lug
S = Splice
Std.
Wire
Size
Wire
Strip
Length
(In.)
SA6
#6
AWG
3/4
LAA6
LAA4
SA4
LAA2
SA2
LAA1
SA1
LAA1/0, LAB1/0
C.
Wiring
Duct
SA1/0
LAA2/0, LAB2/0
SA2/0
LAA3/0, LAB3/0
SA3/0
LAA4/0, LAB4/0
SA4/0
LAA250, LAB250
D.
Terminals
and
Reel
Smart™
System
SA250
LAA300, LAB300
SA300
LAA350, LAB350
SA350
LAA400, LAB400
SA400
LAA500, LAB500
SA500
LAA600, LAB600
E.
Power
Connectors
and
Grounding
SA600
LAA750, LAB750
SA750
LAA800, LAB800
SA800
LAA1000, LAB1000
SA1000
#4
AWG
1
1-1/16
7/8
1
#2
AWG
7/16
#1
AWG
7/16
1
1/0
AWG
1-9/16
2/0
AWG
1-9/16
3/0
AWG
1-9/16
1
1-1/8
1-1/4
1-3/4
4/0
AWG
1-5/16
250
kcmil
1-7/16
1-3/4
300
kcmil
2-5/16
350
kcmil
2-5/16
400
kcmil
1-1/2
1-5/8
2-9/16
1-13/16
500
kcmil
3-1/16
600
kcmil
3-1/16
750
kcmil
3-7/16
800
kcmil
3-7/16
1000
kcmil
1-7/8
2
2-1/4
2-5/16
4-3/4
2-9/16
TBM5
TBM8
Burndy
TBM15,
TBMISI,
TBMISBSCR
MY29
Y35
Y39
Anderson
Y45, Y46
VC8
Die Part Number/Color Code and Die Index Number (Number of Crimps)
U6CABT
Gray 346
(1)
U4CABT
Green 375
(1)
U2CABT
Pink 348
(2)
U1CART
Gold 471
(2)
U25ART
Tan 298
(2)
U26ART
Olive 297
(2)
U27ART
Ruby 467
(2)
U28ART
White 298
(2)
U29ART
Red 324
(2)
U30ART
Blue 470
(2)
U31ART
Brown 299
(2)
U32ART
Green 472
(4)
U34ART
Pink 300
(4)
U36ART
Black 473
(4)
U6CABT
Gray 346
(1)
U4CABT
Green 375
(1)
U2CABT
Pink 348
(2)
U1CART
Gold 471
(2)
U25ART
Tan 298
(2)
U26ART
Olive 297
(2)
U27ART
Ruby 467
(2)
U28ART
White 298
(2)
U29ART
Red 324
(2)
U30ART
Blue 470
(2)
U31ART
Brown 299
(2)
U32ART
Green 472
(4)
U34ART
Pink 300
(4)
U36ART
Black 473
(4)
S39ART
Red 301
(4)
U6CABT
Gray 346
(1)
U4CABT
Green 375
(1)
U2CABT
Pink 348
(2)
U1CART
Gold 471
(2)
U25ART
Tan 298
(2)
U26ART
Olive 297
(2)
U27ART
Ruby 467
(2)
U28ART
White 298
(2)
U29ART
Red 324
(2)
U30ART
Blue 470
(2)
U31ART
Brown 299
(2)
U32ART
Green 472
(4)
U34ART
Pink 300
(4)
U36ART
Black 473
(4)
S39ART
Red 301
(4)
—
Gray 474
(4)
Gray 474
(4)
—
—
S44ART
Brown 302
(4)
S44ART
Brown 302
(4)
—
Gray 29
(2)
Gray 29
(2)
Gray 29
(2)
6AL
(1)
Green 37
(2)
Green 37
(2)
Green 37
(2)
4AL
(1)
Pink 42
(3)
Pink 42
(3)
Pink 42
(3)
2AL
(1)
Gold 45
(3)
Gold 45
(3)
Gold 45
(3)
1AL
(1)
Tan 50
(3)
Tan 50
(3)
Tan 50
(3)
1/0AL
(1)
Olive 54
(3)
Olive 54
(3)
Olive 54
(3)
2/0AL
(2)
Ruby 60
(4)
Ruby 60
(4)
Ruby 60
(4)
3/0AL
(2)
—
White 66
(4)
White 66
(4)
4/0AL
(2)
—
Red 71
(4)
Red 71H
(4)
—
—
Blue 76
(4)
Blue 76
(4)
—
—
Brown 87
(4)
Brown 87H
(4)
—
—
—
Green 94H
(4)
—
—
—
Pink 99H
(4)
—
—
—
Black 106
(3)
—
—
—
Yellow 115H
(4)
—
—
—
—
125H
(4)
—
—
—
161
(5)
—
Half width dies.
STD
(1)
STD
(1)
STD
(1)
STD
(1)
STD
(2)
STD
(2)
STD
(2)
STD
(2)
STD
(2)
STD
(2)
STD
(2)
—
—
—
—
F.
Part
Number
Index
E.50
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 50
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Aluminum
Conductors
How to read
this chart
For BPC6
connector and
CT-2001
crimping tool
Installation Tooling and Die Selections for:
A.
Cable
Ties
Type BPC
Reducing from
Die Part Number
Color
Code
CD-2001-3/0
Tan P50
(2)
Die Index
Number
Number
of Crimps
Panduit Splice
Part Number
L = Lug
S = Splice
Std.
Wire
Size
Wire Strip
Length
(In.)
BPC6
#6
AWG
1-1/16
BPC4
#4
AWG
1-1/16
BPC2
#2
AWG
1-1/16
BPC1
#1
AWG
1-1/16
BPC1/0
1/0
AWG
1-5/16
BPC2/0
2/0
AWG
1-5/16
BPC3/0
3/0
AWG
1-5/16
BPC4/0
4/0
AWG
1-5/16
BPC250
BPC300
BPC350
BPC400
BPC500
BPC600
BPC750
250 kcmil
300 kcmil
350 kcmil
400 kcmil
500 kcmil
600 kcmil
750 kcmil
1-7/16
1-7/16
1-7/16
1-7/16
1-7/16
1-15/16
1-15/16
Panduit (See Compression Connector Tools Selection Guide,
Pages E.3 – E.5)
CT-720
CD-720-2
Tan P50
(2)
CD-720-2
Tan P50
(2)
CD-720-2
Tan P50
(2)
CD-720-2
Tan P50
(2)
CD-720-5
Red P71
(2)
CD-720-5
Red P71
(2)
CD-720-5
Red P71
(2)
CD-720-5
Red P71
(2)
CT-2001, CT-2001/L, CT-930, CT-930CH, CT-2930, CT-2930/L,
CT-2001/LE,
CT-2930/LE, CT-2931, CT-920, CT-920CH,
CT-2002, CT-2002/L, CT-2940, CT-2940/L, CT-2940/LE,
CT-3001, CT-3001/E
CT-2920, CT-940CH
Die Part Number/Color Code and
Die Index Number (Number of Crimps)
CD-2001-3/0
Tan P50
(2)
CD-2001-3/0
Tan P50
(2)
CD-2001-3/0
Tan P50
(2)
CD-2001-3/0
Tan P50
(2)
CD-2001-350
Red P71
(3)
CD-2001-350
Red P71
(3)
CD-2001-350
Red P71
(3)
CD-2001-350
Red P71
(3)
CD-920-3/0
Tan P50
(2)
CD-920-3/0
Tan P50
(2)
CD-920-3/0
Tan P50
(2)
CD-920-3/0
Tan P50
(2)
CD-920-350
Red P71
(2)
CD-920-350
Red P71
(2)
CD-920-350
Red P71
(2)
CD-920-350
Red P71
(2)
CD-920-600
Green P94
(2)
CD-920-600
Green P94
(2)
CD-920-600
Green P94
(2)
CD-920-750, CD-940-750
Black P106
(2)
CD-920-750, CD-940-750
Black P106
(2)
—
—
—
—
—
—
—
—
—
—
—
—
CD-940-750A
Red P125 (2)
—
—
CD-940-750A
Red P125 (2)
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA die adapter. Maximum size splice is 250 kcmil with CT-920, CT-920CH,
and CT-2920 tools.
CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
F.
Part
Number
Index
Continues on next page
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 51
For service and technical support, call 800-777-3300.
E.51
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Aluminum
Conductors
Installation Tooling and Die Selections for:
Type BPC (continued)
Thomas & Betts
TBM8
Orange 50
(2)
Tan 50
(2)
Orange 50
(2)
Orange 50
(2)
Tan 50
(2)
Orange 50
(2)
Orange 50
(2)
Tan 50
(2)
Orange 50
(2)
Orange 50
(2)
Tan 50
(2)
Orange 50
(2)
Blue 76H
(2)
Blue 76
(2)
Blue 76
(2)
Blue 76H
(2)
Blue 76
(2)
Blue 76
(2)
Blue 76H
(2)
Blue 76
(2)
Blue 76
(2)
Blue 76H
(2)
Blue 76
(2)
Blue 76
(2)
Pink 99H
(2)
Brown 87
(3)
Brown 87H
(2)
Pink 99H
(2)
Brown 87
(3)
Brown 87H
(2)
Pink 99H
(2)
Brown 87
(3)
Brown 87H
(2)
Black 106H
(3)
—
Black 106H
(3)
Black 106H
(3)
—
Black 106H
(3)
U34ART
Pink 300
(3)
Yellow 115H
(3)
—
Yellow 115H
(3)
—
Yellow 115H
(3)
—
Yellow 115H
(3)
—
13642M
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
Burndy
TBM15, TBM15I,
TBM15BSCR
Y35, BAT35
Y39, Y45, Y46, Y39BH
U25ART
Tan 296
(2)
U25ART
Tan 296
(2)
U25ART
Tan 296
(2)
U25ART
Tan 296
(2)
Die Part Number/Color Code and Die Index Number/(Number of Crimps)
U25ART
Tan 296
(2)
U25ART
Tan 296
(2)
U25ART
Tan 296
(2)
U25ART
Tan 296
(2)
U28ART
White 298
(2)
U28ART
White 298
(2)
U28ART
White 298
(2)
U28ART
White 298
(2)
U28ART
White 298
(2)
U28ART
White 298
(2)
U28ART
White 298
(2)
U28ART
White 298
(2)
U31ART
Brown 299
(2)
U31ART
Brown 299
(2)
U31ART
Brown 299
(2)
U31ART
Brown 299
(2)
U31ART
Brown 299
(2)
U34ART
Pink 300
(3)
U31ART
Brown 299
(2)
U34ART
Pink 300
(3)
U34ART
Pink 300
(3)
U39ART-2
Yellow 936
(3)
U39ART-2
Yellow 936
(3)
Half width dies.
F.
Part
Number
Index
E.52
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 52
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
How to read
this chart
For GCE250-1/0
and CT-2930
tool:
Installation Tooling and Die Selections for:
A.
Cable
Ties
Types GCE, GCC and GPC
Reducing from
Die Part Number
Color
Code
CD-930G-250
Black PG25
(1)
Installation Tools
Die Index
Number
12 TON
14 TON
15 TON
CT-2931
Panduit
CT-930
CT-930CH
CT-2930
CT-2930/L
CT-2930/LE
CT-940CH
CT-2940
CT-2940/L
CT-2940/LE
Number
of Crimps
Y750,
Y750-2, Y750BH,
Y750BH-2,
BAT750-14V,
PAT750-18V,
PAT750C-18V,
PAT750XT-18V,
PAT750CXT-18V,
LPHY750
Panduit
Part Number
GCE1/0-1/0
GCC6X61/0-1/0
GCE250-1/0
GCC6X6250-1/0
GCE250-250
GCE6X6250-250
GPC4H250-2
GCE500-1/0
GCC6X6500-1/0
GCE500-250
GCC6X6500-250
Element
Ground
Rod Size
(In.)
Rebar Size (In.)
#6 AWG SOL – 1/0 AWG STR
—
—
#6 AWG SOL – 1/0 AWG STR
A
#6 AWG SOL – 1/0 AWG STR
Tap
B
Main
#6 AWG SOL – 1/0 AWG STR
1/2 – 5/8
3/8 – 1/2, #3 – #4
1/0 AWG SOL – 250 kcmil
1/2 – 5/8
3/8 – 1/2, #3 – #4
#2 AWG SOL – 250 kcmil
1/2 – 5/8
3/8 – 1/2, #3 – #4
Tap
1/0 AWG SOL – 250 kcmil
Main
#2 AWG SOL – 250 kcmil
#2 AWG SOL – 250 kcmil
1/2 – 5/8
1/2 – 5/8
—
—
3/8 – 1/2, #3 – #4
3/8 – 1/2, #3 – #4
—
5/8 – 3/4, #5 – #6
250 – 500 kcmil
1/2 – 3/4
5/8 – 3/4, #5 – #6
250 – 500 kcmil
1/2 – 3/4
5/8 – 3/4, #5 – #6
250 – 500 kcmil
1/2 – 3/4
5/8 – 3/4, #5 – #6
B
#6 AWG SOL – 1/0 AWG STR
Tap
1/0 AWG SOL – 250 kcmil
B
#2 AWG SOL – 250 kcmil
A
—
—
1/2 – 3/4
#6 AWG SOL – 1/0 AWG STR
Main
—
250 – 500 kcmil
Tap
A
—
#2 AWG SOL – 250 kcmil
#6 AWG SOL – 1/0 AWG STR
B
—
3/8 – 1/2, #3 – #4
B
A
—
1/2 – 5/8
#6 AWG SOL – 1/0 AWG STR
Main
—
—
1/0 AWG SOL – 250 kcmil
Tap
A
—
—
—
—
—
—
Thomas & Betts
TBM14M,
TBM14MC,
13100A,
TBM14RH,
TBM14BSCR,
BPLT14BSCRI
Copper Conductor Size
Range
Main
Burndy
—
—
—
—
B.
Stainless
Steel
Y46,
Y46C,
LPHY46
TBM15
TBM15BSCR
C.
Wiring
Duct
Die Part Number/Color Code and
Die Index Number/(Number of Crimps)
CD-930G-1/0
Red
PG10
(1)
CD-930G-250
Black
PG25
(1)
D.
Terminals
and
Reel
Smart™
System
CD-930G-250
Black
PG25
(1)
CD-930G-500
Blue
PG50
(1)
CD-930G-500
Blue
PG50
(1)
E.
Power
Connectors
and
Grounding
15 ton tools require the CD-940-DA adapter when used with CD-930G series crimping dies.
Panduit crimping dies must be used with all tooling (Panduit and competitor).
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 53
For service and technical support, call 800-777-3300.
E.53
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper
Conductors
How to read
this chart
For CTAP4-4
and CT-2001
tool:
Installation Tooling and Die Selections for:
Type CTAP
Reducing from
Die Part Number
CD-2001-BG
(2)
Number
of Crimps
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
Conductor Size
Panduit
Part Number
Burndy
Panduit
Wire
Strip
Length
(In.)
CT-920, CT-920CH,
CT-930, CT-2920,
CT-930CH,
CT-2930, CT-2930/L,
CT-2930/LE,
CT-2931, CT-940CH,
CT-2940,
CT-2940/L,
CT-2940/LE
CT-2001,
CT-2001/L,
CT-2001/LE,
CT-2002,
CT-2002/L,
CT-3001,
CT-3001/E
MD6, MD7
BAT35, BAT750,
PAT750, Y35, Y35BH,
Y39, Y39BH, Y45,
Y46, Y750, Y750HS,
Y750BH
Crimp Die Number/Index Number or Color Code/
(Number of Crimps)
Main
Tap
CTAP4-8
#6 – #4 AWG
SOL or STR
#8 AWG SOL
or STR
3/4
CD-920-BG
(1)
CD-2001-BG
(1)
W-BG (1)
BG (2)
U-BG (1)
CTAP4-6
#6 AWG STR,
#4 AWG SOL
or STR
#6 AWG SOL
or STR
3/4
CD-920-BG
(1)
CD-2001-BG
(2)
W-BG (1)
BG (2)
U-BG (1)
CTAP4-4
#4 AWG SOL
or STR
#4 AWG STR
3/4
CD-920-BG
(1)
CD-2001-BG
(1)
W-BG (1)
BG (2)
U-BG (1)
CTAP2-4
#2 AWG SOL
or STR
#8 – #4 AWG
SOL or STR
7/8
CD-920-C
(1)
CD-2001-C
(2)
W-C Brown
(2)
U-C (1)
CTAP2-2
#2 AWG SOL
or STR
#2 AWG SOL
or STR
7/8
CD-920-C
(1)
CD-2001-C
(2)
W-C Brown
(2)
U-C (1)
CTAP2/0-2
1/0 – 2/0 AWG
#8 – #2 AWG
SOL or STR
1-1/16
CD-920-0
Green
(1)
—
—
U-O (1)
U-E (3)
CTAP2/0-2/0
1/0 – 2/0 AWG
STR
1/0 – 2/0 AWG
STR
1-1/16
—
—
U-O (1)
U-E (3)
CTAP4/0-2
3/0 – 4/0 AWG
STR
#6 – #2 AWG
SOL or STR
1-1/4
—
—
U-F (2)
U-D3 (1)
CTAP4/0-2/0
3/0 – 4/0 AWG
STR
1/0 – 2/0 AWG
STR
1-1/4
—
—
U-F (2)
U-D3 (1)
CTAP4/0-4/0
3/0 – 4/0 AWG
STR
3/0 – 4/0 AWG
STR
1-1/4
—
—
U-F (2)
U-D3 (1)
CD-920-0
Green
(1)
CD-920-D3
Blue
(1)
CD-920-D3
Blue
(1)
CD-920-D3
Blue
(1)
CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940-DA adapter.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.54
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 54
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
How to read
this chart
For CTAPF6-12
tap and CT-2001
crimping tool:
Installation Tooling and Die Selections for:
A.
Cable
Ties
Types CTAPF
Die Part Number
Color
Code
CD-2001-4
Gray P29
(1)
Die Index
Number
Panduit
Number
of Crimps
Stranded Wire Size
Panduit
Part Number
CTAPF10-16
CTAPF8-12
CTAPF6-12
CTAPF4-12
CTAPF3-12
Main
#12 AWG
#10 AWG
#16 – #14 AWG
#16 – #12 AWG
#14 AWG
#10 AWG
#10 AWG
#8 AWG
#12 AWG
#8 AWG
#8 – #12 AWG
#6 AWG
#12 – #10 AWG
#14 AWG
#6 AWG
#8 – #6 AWG
#5, #4 AWG
#12 – #8 AWG
#5, #4 AWG
#6 – #5 AWG
#3 AWG
#12 – #6 AWG
#4 AWG
#4 AWG
#5 AWG
#12 – #6 AWG
#4 – #3 AWG
#5 – #4 AWG
#12 – #5 AWG
#4 – #2 AWG
#4 – #3 AWG
#12 – #4 AWG
#2 – #1 AWG
#3 – #2 AWG
#12 – #3 AWG
#1 – 1/0 AWG
CTAPF2-12
#3 AWG
CTAPF1-12
#2 AWG
CTAPF1/0-12
#1 AWG
CTAPF2/0-12
CTAPF3/0-12
Tap
#2 AWG
#3 AWG
#1 AWG
#2 AWG
1/0 AWG
#1 AWG
1/0 AWG
2/0 AWG
1/0 AWG
2/0 AWG
3/0 AWG
#2 – #1 AWG
#12 – #2 AWG
CT-1700
CT-2001, CT-2001/L,
CT-2001/LE, CT-2002,
CT-2002/L, CT-3001, CT-3001E
Red
P21
(2)
CD-2001-8
Red P21
(1)
Blue
P24
(2)
CD-2001-6
Blue P24
(1)
Brown
P33
(4)
CD-2001-2
Brown P33
(2)
—
CD-2001-1/0
Pink P42
(2)
—
CD-2001-2/0
Black P45
(3)
—
CD-2001-3/0
Orange P50
(3)
—
CD-2001-4/0
Purple P54
(3)
—
CD-2001-250
Yellow P62
(3)
Crimp Die Number/Index Number or Color Code/
(Number of Crimps)
Gray
P29
(2)
Green
P37
(4)
CD-2001-4
Gray P29
(1)
B.
Stainless
Steel
C.
Wiring
Duct
CD-2001-1
Green P37
(2)
The CT-1700 crimp die pockets are integrated into the tool frame.
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
Continues on next page
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 55
For service and technical support, call 800-777-3300.
E.55
7/25/16 7:56 AM
Tool Solutions
A.
Cable
Ties
For use with
Copper
Conductors
Installation Tooling and Die Selections for:
Types CTAPF (continued)
Burndy
Stranded Wire Size
B.
Stainless
Steel
Panduit
Part Number
Run
CTAPF8-12
CTAPF6-12
CTAPF4-12
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
CTAPF3-12
#10 AWG
#16 – #14 AWG
#16 – #12 AWG
#14 AWG
#10 AWG
#10 AWG
#8 AWG
#12 AWG
#8 AWG
#8 – #12 AWG
#6 AWG
#12 – #10 AWG
#6 AWG
#8 – #6 AWG
#5, #4 AWG
#12 – #8 AWG
#5, #4 AWG
#6 – #5 AWG
#3 AWG
#12 – #6 AWG
#4 AWG
#4 AWG
#5 AWG
#12 – #6 AWG
#4 – #3 AWG
#5 – #4 AWG
#12 – #5 AWG
#4 – #2 AWG
#4 – #3 AWG
#12 – #4 AWG
#2 – #1 AWG
#3 – #2 AWG
#12 – #3 AWG
#1 – 1/0 AWG
#2 – #1 AWG
#12 – #2 AWG
CTAPF2-12
#3 AWG
CTAPF1-12
#2 AWG
CTAPF1/0-12
#1 AWG
CTAPF2/0-12
CTAPF3/0-12
#2 AWG
#3 AWG
#1 AWG
#2 AWG
1/0 AWG
#1 AWG
1/0 AWG
2/0 AWG
1/0 AWG
2/0 AWG
3/0 AWG
Y35, Y39, Y45, Y46,
Y750BH-2, Y750, BAT35,
BAT750, Y35BH, Y39BH,
Y750BH, Y750HS,
PAT750, Y750-2
Y500CT-HS,
BCT500-HS,
BCT500, Y500CT
TBM8-750,
TBM8-750M-1,
TBM8-750BSCR
—
—
—
—
—
—
—
—
—
UC4
Brown 10M
(1)
WC4
Brown 10M
(1)
TBM8-750C20
(1)
—
—
TBM8-750C2530
(1)
UC2
Pink 12M
(1)
WC2
Pink 12M
(1)
TBM8-750C2530
(1)
UC1
Black 13M
(1)
WC1
Black 13M
(2)
TBM8-750C3540
(1)
UC25
Orange 14M
(1)
WC25
Orange 14M
(2)
TBM8-750C3540
(1)
—
—
TBM8-750C4550
(1)
—
—
TBM8-750C4550
(1)
Tap
#12 AWG
#14 AWG
CTAPF10-16
Thomas & Betts
Crimp Die Number/Index Number or Color Code/
(Number of Crimps)
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.56
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 56
7/25/16 7:56 AM
Power Connectors and Grounding
For use with
Copper
Conductors
How to read
this chart
For HTCT6X-6X
tap and CT-2931
crimping tool:
Installation Tooling and Die Selections for:
A.
Cable
Ties
Type HTCT
Die Part Number
Installation Tools
CD-920H-6
PH6
15 TON
14 TON
12 TON
CT-940CH
CT-2940,
CT-2940/L,
CT-2940/LE
Panduit
CT-930,
CT-930CH,
CT-2930,
CT-2930/L,
CT-2930/LE
CT-920,
CT-920CH,
CT-2920,
CT-2931,
CT-2931/E
Die Index Number
Burndy
Y46,
Y46C
Copper Conductor Sizes
(Flex Cable)
Types G, H, I, K, M
and Locomotive (DLO)
Copper Conductor Sizes
(Code Cable)
Panduit
Part Number
Main
—
Y35, Y35-2,
Y35BH,
Y35BH-4,
Y750,
Y39, Y39BH,
Y750-2,
Y750BH,
Y750BH-2,
Y750HS,
BAT35,
BAT750,
BAT750C,
PAT750,
PAT750C
Thomas & Betts
TBM14M,
TBM14BSCR,
TBM15I,
BPLT14BSCR,
TBM15BSCR
13100A
Tap 2
Tap 3
—
—
Orange
CD-920H-6
PH6
CD-920H-6
PH6
CD-920H-6
PH6
#8-#14 #8-#14
AWG
AWG
Brown
CD-920H-2
PH2
CD-920H-2
PH2
CD-920H-2
PH2
#2-#8
AWG
#8-#14
AWG
—
Purple
CD-930H-250
PH25
CD-930H-250
PH25
CD-930H-250
PH25
4/0-#2
AWG
—
—
Purple
CD-930H-250
PH25
CD-930H-250
PH25
CD-930H-250
PH25
Tap 1
Tap 2
Tap 3
Tap 1
HTCT6X-6X
#6-#14
AWG
#6-#14
AWG
—
—
HTCT2-2
#2-#6
AWG
#2-#6
AWG
#8-#14 #8-#14
AWG
AWG
#2-#8
AWG
#2-#8
AWG
HTCT250-2
250 kcmil
-#2 AWG
#2-#6
AWG
#8-#14
AWG
—
4/0-#2
AWG
HTCT250250
250 kcmil 250 kcmil
-#2 AWG -#2 AWG
—
—
4/0-#2
AWG
#6-#10 #6-#14
AWG
AWG
C.
Wiring
Duct
—
Crimp
Die
Color
Code
Run
B.
Stainless
Steel
Panduit Crimp Die Part Number/
Color Code/Die Index Number/
(Number of Crimps = 1)
D.
Terminals
and
Reel
Smart™
System
CD-920H and CD-930H dies can be used with CT-940CH and CT-2940 Panduit tools and Y46 and Y46C Burndy tools with CD-940-DA adapter.
Panduit crimping dies must be used with all tooling (Panduit and competitor) to maintain UL/CSA certifications for applications up to 600 V.
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
www.panduit.com
2016_IEI_E_Grounding Connectors_TC_v4.indd 57
For service and technical support, call 800-777-3300.
E.57
7/25/16 7:56 AM
Tool Solutions
Notes
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
E.58
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_E_Grounding Connectors_TC_v4.indd 58
7/25/16 7:56 AM
Part Number Index
Part Number Index
Part Number
Page
Number
B
BT2HT......................................................B.6
BT75SDT..................................................B.6
C
C-720................................................ D.9, E.6
CA9..............................................D.17, D.21
CA-800EZ.....................................D.17, D.21
CAMT.......................................................B.2
CC-720............................................. D.9, E.6
CCT-320...................................................E.8
CCT-500...................................................E.8
CD9-1A...................................................D.20
CD9-1AD................................................D.20
CD9-1B...................................................D.20
CD9-2A...................................................D.20
CD9-2AD................................................D.20
CD9-2B...................................................D.20
CD9-3B...................................................D.20
CD9-4A...................................................D.20
CD9-4B...................................................D.20
CD9-5A...................................................D.20
CD9-5B...................................................D.20
CD9-6B...................................................D.20
CD9-7A...................................................D.20
CD9-8B...................................................D.20
CD9-9C..................................................D.20
CD9-10A.................................................D.20
CD9-10B.................................................D.20
CD9-11A.................................................D.20
CD9-11B.................................................D.20
CD9-12A.................................................D.20
CD9-13B.................................................D.20
CD9-14A.................................................D.20
CD9-15A.................................................D.20
CD9-16A.................................................D.20
CD9-17B.................................................D.20
CD9-18B.................................................D.20
CD-525...................................................D.10
CD-550...................................................D.10
CD-570...................................................D.10
CD-720-1.......................................... D.9, E.7
CD-720-2.......................................... D.9, E.7
CD-720-3.......................................... D.9, E.7
CD-720-4.......................................... D.9, E.7
CD-720-5.......................................... D.9, E.7
CD-720-6.......................................... D.9, E.7
CD-720-7.......................................... D.9, E.7
CD-720PV8-2................................... D.9, E.7
CD-920-1................................................E.19
CD-920-1/0.............................................E.19
CD-920-2................................................E.19
CD-920-2/0.............................................E.19
CD-920-3/0.............................................E.19
CD-920-4................................................E.19
CD-920-4/0.............................................E.19
CD-920-6................................................E.19
CD-920-8................................................E.19
www.panduit.com
2016_IEI_F_Index_v3.indd 1
Part Number
Page
Number
CD-920-250............................................E.19
CD-920-300............................................E.19
CD-920-350............................................E.19
CD-920-400............................................E.19
CD-920-500............................................E.19
CD-920-500A..........................................E.19
CD-920-600............................................E.19
CD-920-750............................................E.19
CD-920-BG.............................................E.19
CD-920-C...............................................E.19
CD-920-D3.............................................E.19
CD-920H-2.............................................E.19
CD-920H-6.............................................E.19
CD-920H-250.........................................E.19
CD-920-O...............................................E.19
CD-930G-1/0..........................................E.19
CD-930G-250.........................................E.19
CD-930G-500.........................................E.19
CD-940-750............................................E.20
CD-940-750A..........................................E.20
CD-940-750X.........................................E.20
CD-940-800............................................E.20
CD-940-800A..........................................E.20
CD-940-1000..........................................E.20
CD-940-1000A........................................E.20
CD-940-DA.............................................E.20
CD-2001-1-SET...................................... E.11
CD-2001-1/0-SET................................... E.11
CD-2001-2-SET...................................... E.11
CD-2001-2/0-SET................................... E.11
CD-2001-3/0-SET................................... E.11
CD-2001-4-SET...................................... E.11
CD-2001-4/0-SET................................... E.11
CD-2001-6-SET...................................... E.11
CD-2001-8-SET...................................... E.11
CD-2001-250-SET.................................. E.11
CD-2001-300-SET.................................. E.11
CD-2001-350-SET.................................. E.11
CD-2001-400-SET.................................. E.11
CD-2001-500-SET.................................. E.11
CD-2001-BG-SET................................... E.11
CD-2001-C-SET..................................... E.11
CD-2001-F87..........................................D.12
CD-2001-F89..........................................D.12
CD-2001-F90..........................................D.12
CD-2001-F91..........................................D.12
CD-2001-F92..........................................D.12
CD-2001-F93..........................................D.12
CD-2001-F94..........................................D.12
CD-2600-P2...........................................D.11
CD-2600-P4...........................................D.11
CD-2600-P6...........................................D.11
CD-2600-P8...........................................D.11
CD-2600-PV2.........................................D.11
CD-2600-PV4.........................................D.11
CD-2600-PV6.........................................D.11
CD-2600-PV8.........................................D.11
CG-920...................................................E.24
Part Number
Page
Number
CG-940...................................................E.24
CG-980...................................................E.24
CP-881...................................................D.16
CP-881/E................................................D.16
CST101....................................................E.8
CST114-157.............................................E.8
CST114-157B...........................................E.8
CST115............................................. D.5, E.8
CT-100A...................................................D.5
CT-160......................................................D.5
CT-200......................................................D.5
CT-260......................................................D.5
CT-300-1..................................................D.7
CT-310......................................................D.7
CT-400......................................................D.8
CT-460......................................................D.8
CT-500CH................................................D.8
CT-520CH................................................D.8
CT-550CH................................................D.8
CT-570CH................................................D.8
CT-600-A..................................................D.8
CT-720.............................................. D.9, E.6
CT-720-3..................................................E.7
CT-720-3CC.............................................E.7
CT-720-7..................................................E.7
CT-720-7CC.............................................E.7
CT-900HPH............................................E.16
CT-900LPHPH........................................E.18
CT-902HP...............................................E.16
CT-902HP-5K.........................................E.18
CT-902RCH............................................E.16
CT-902RFS............................................E.16
CT-930......................................................E.9
CT-930CH..............................................E.14
CT-930LPCH..........................................E.17
CT-940CH..............................................E.15
CT-980....................................................E.21
CT-980CH..............................................E.23
CT-1000..........................................D.8, D.16
CT-1002....................................................D.7
CT-1003....................................................D.7
CT-1004....................................................D.7
CT-1005....................................................D.7
CT-1006....................................................D.7
CT-1015....................................................D.6
CT-1104....................................................D.7
CT-1123....................................................D.7
CT-1525....................................................D.6
CT-1550....................................................D.6
CT-1551....................................................D.6
CT-1570....................................................D.6
CT-1700............................................ D.6, E.6
CT-1701............................................ D.6, E.6
CT-2500CH............................................D.10
CT-2500/LBC..........................................D.10
CT-2500/LCHR.......................................D.10
CT-2500/LE............................................D.10
CT-2500/LECHR....................................D.10
For service and technical support, call 800-777-3300.
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
D.
Terminals
and
Reel
Smart™
System
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
F.1
7/25/16 10:57 AM
Tool Solutions
A.
Cable
Ties
B.
Stainless
Steel
C.
Wiring
Duct
Part Number Index
Part Number
Page
Number
CT-2525CH............................................D.10
CT-2550CH............................................D.10
CT-2570CH............................................D.10
CT-2600/L...............................................D.11
CT-2600/LBC..........................................D.11
CT-2600/LCHR.......................................D.11
CT-2600/LINT.........................................D.11
CT-2600/LINTBC....................................D.11
CT-2600/LINTCHR.................................D.11
CT-2930/L...............................................E.12
CT-2930/LE............................................E.12
CT-2940/L...............................................E.13
CT-2940/LE............................................E.13
CT-2980/L...............................................E.22
CT-2980/LE............................................E.22
CT-3001..................................................E.10
CT-3001/E..............................................E.10
D
DCT..........................................................C.2
DCT-BLD..................................................C.2
DCT-RI......................................................C.2
DFCT........................................................C.2
DNT-100...................................................C.2
DSF-NP..................................................D.18
DSF-RS..................................................D.18
F
FPC-600-A................................................D.8
D.
Terminals
and
Reel
Smart™
System
G
GHH..........................................................A.6
GS2B........................................................A.3
GS4EH.....................................................A.3
GS4H........................................................A.3
GS4MT.....................................................B.2
GTH-E......................................................A.3
GTS-E.......................................................A.3
H
HTMT........................................................B.4
E.
Power
Connectors
and
Grounding
F.
Part
Number
Index
F.2
K
K2-BLD2...................................................A.6
K4EH-BLD................................................A.6
K4H-BLD..................................................A.6
K4M-BLD..................................................B.2
K4MTG.....................................................B.2
K600-A......................................................D.8
KGTH-EBLD.............................................A.6
KGTSBLD.................................................A.6
KGTS-ETL................................................A.6
KMTRTH...................................................B.5
KMTRTLS.................................................B.5
KPPTMTB.................................................B.4
KPPTMTG................................................B.4
Part Number
Page
Number
KPTHBLD.................................................A.6
KPTSTL....................................................A.6
KRT2BLD.................................................B.6
KRT2HNDL...............................................B.6
M
MTRTH.....................................................B.5
MTRTLS...................................................B.5
N
NR1-C.......................................................C.2
NR1-M......................................................C.2
P
PAT1.5M4.0..............................................A.8
PAT1.5M4.0-BT........................................A.8
PAT1M4.0.................................................A.8
PAT1M4.0-BT...........................................A.8
PAT2S.......................................................A.8
PAT3S.......................................................A.8
PATM4.0-RK........................................... A.11
PATMBM......................................... A.8, A.10
PATM-RKS............................................. A.11
PATM-TT................................................ A.11
PATSBM.................................................A.10
PBDCT.....................................................C.2
PBDCT-BLD.............................................C.2
PBTMT.....................................................B.5
PD3S................................................ A.8, A.9
PD3SF.............................................. A.8, A.9
PD-600-A..................................................D.8
PDH10-37....................................... A.8, A.10
PDM4.0............................................ A.8, A.9
PDS.................................................. A.8, A.9
PDS-DI........................................... A.8, A.10
PDSF................................................ A.8, A.9
PG-1.......................................................E.24
PG-1SC..................................................E.24
PHCAT......................................................A.5
PHM1............................................... A.8, A.9
PHM2............................................... A.8, A.9
PHM3............................................... A.8, A.9
PHM4............................................... A.8, A.9
PHS2................................................ A.8, A.9
PHS3................................................ A.8, A.9
PL283N1........................................ A.8, A.10
PL289N1.......................................... A.5, B.4
PPH10.............................................. A.5, B.4
PPTMT.....................................................B.4
PTB-HO..................................................E.10
PTH..........................................................A.5
PTS..........................................................A.5
Part Number
Page
Number
S
SCA-712022002.....................................D.17
SCA-712022005WE.....................D.17, D.20
SCA-712022006WE.....................D.17, D.20
SCA-712022007WE.....................D.17, D.20
ST2MT......................................................B.3
ST3EH......................................................A.4
ST4MT.............................................. B.2, B.3
STH2........................................................A.4
STHV........................................................A.4
STS2........................................................A.4
T
TD13483C03..........................................D.19
TD13486C03..........................................D.19
TD13489C03..........................................D.19
TD13492C04..........................................D.19
TD13495C03..........................................D.19
TD13499C03..........................................D.19
TD13502C04..........................................D.19
TD13505C03..........................................D.19
TD13508C03..........................................D.19
TD16233C03..........................................D.19
TD16235C03..........................................D.19
TD16243C02..........................................D.19
TD19115C03..........................................D.19
TD22944C02..........................................D.19
TD22946C02..........................................D.19
TD22948C02..........................................D.19
TD23600C01..........................................D.19
TD23773C01..........................................D.19
TNR..........................................................C.2
TTLK3............................................... A.6, B.3
U
UC 200...................................................D.18
W
WD25737B01...........................................C.2
R
RT2HT.............................................. B.2, B.3
RT2HTN...................................................B.3
Order number of pieces required, in multiples of Standard Package Quantity.
2016_IEI_F_Index_v3.indd 2
7/25/16 10:57 AM
THE INFORMATION CONTAINED IN THIS CATALOG IS INTENDED AS A GUIDE FOR USE BY
PERSONS HAVING TECHNICAL SKILL AT THEIR OWN DISCRETION AND RISK. BEFORE USING
ANY PANDUIT PRODUCT, THE BUYER MUST DETERMINE THE SUITABILITY OF THE PRODUCT
FOR HIS/HER INTENDED USE AND BUYER ASSUMES ALL RISK AND LIABILITY WHATSOEVER
IN CONNECTION THEREWITH. PANDUIT DISCLAIMS ANY LIABILITY ARISING FROM ANY
INFORMATION CONTAINED HEREIN OR FOR ABSENCE OF THE SAME.
All Panduit products are subject to the terms, conditions and limitation of its then current Limited Product Warranty,
which can be found at www.panduit.com/warranty.
All trademarks, service marks, trade names, product names, and logos appearing in this document are the property of
their respective owners.
www.panduit.com
Panduit Corp.
World Headquarters
Tinley Park, IL 60487
800.777.3300
www.panduit.com
© 2016 Panduit Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
ELCB19--SA-ENG 07/2016
