CD-2001-F87

Large Ferrule Crimping Dies S p e c i f i c a t i o n S H EET specifications Large ferrule crimping dies shall be designed to snap into the battery powered crimping tool CT-3001 or CT-3001/E and shall have a cycle time of three seconds. These crimping dies shall be used to install ferrules onto the stripped ends of #1 AWG to 500 kcmil flexible cable, classes DLO, H, I, K, and M. The ferrules shall be used to manage the individual wire strands comprising the bundle and prevent broken and turned back strands. Ferrules on mechanically terminated cable shall prevent generation of excessive heat. Ferrule crimping dies shall provide sufficient wire pullout tensile force and shall reduce the cable’s outer profile to less than the ferrule’s outside diameter. These crimping dies and ferrules shall be used to improve the efficiency and reliability of electrical distribution panels, switchgear, MCC panels, and transmission stations. technical information Die dimensions: See table on next page Die life: 50,000 cycles Material: 4140 Steel/RC 32-35 Mounting style: Snap-in Plating: Chrome Weight approximately: 0.65 lb. per die set key features and benefits Interchangeable dies Allows the use of one power tool for multiple wire sizes Snap-in mounting Delivers less than a 20 second exchange of die sets; no tools needed for additional labor savings Durable material Chrome plated steel to insure up to 50,000 cycles and protection against corrosion Impressed die index number Provides a quick post crimp inspection of ferrule for superior performance and quality assurance Single stroke, short cycle time 2.9 second cycle time, 26% faster than most comparable tools to deliver quick and quality terminations Die closure Designed to minimize the profile of the crimped end of wire to assist feeding into connector wire entries Die sets for #1 AWG to 500 kcmil A wide range of the wire types and sizes for use in a variety of applications 6-ton tool frame of CT-3001 Provides sufficient compression of ferrules during crimping to prevent wire pullout and deliver a secure connection applications Panduit large ferrules and crimping dies are designed for electrical distribution panels, switchgear, motor control centers (MCC), transmission stations, and other applications that use large flex cable, #1 AWG to 500 kcmil, classes DLO, H, I, K, and M. These ferrules are used to improve the quality and the installation of flex cable in a variety of mechanical connectors, which are found on circuit breakers, contactors, w w w. pa n d u it.c o m power distribution blocks, and other devices. The mechanical connectors can have circular or square wire entries and terminate conductors with a screw, screw-cage, or spring. The use of ferrules and their proper installation improves the efficiency, equipment reliability, and safety of the termination and overall equipment. The use of ferrules in industrial control panels is in accordance with UL 508A. Large Ferrule Crimping Dies Wire size AWG (mm 2) 1 – 1/0 (50): 2/0 (70): 3/0 (95): 4/0 – 250 kcmil (120): 300 kcmil (150): 350 kcmil (185): 400 – 500 kcmil (240): CD-2001-F87 CD-2001-F89 CD-2001-F90 CD-2001-F91 CD-2001-F92 CD-2001-F93 CD-2001-F94 Related Products Large Ferrules Non-Insulated Wire size AWG (mm 2) 1 – 1/0 (50): 1 – 1/0 (50): 1 – 1/0 (50): 1 – 1/0 (50): 2/0 (70): 2/0 (70): 3/0 (95): 3/0 (95): 3/0 (95): 4/0 – 250 kcmil (120): 4/0 – 250 kcmil (120): 300 kcmil (150): 300 kcmil (150): 350 kcmil (185): 350 kcmil (185): 400 – 500 kcmil (240): F87-18-C F87-22-C F87-25-C F87-32-C F89-25-L F89-32-L F90-25-L F90-30-L F90-32-L F91-32-L F91-40-L F92-32-L F92-38-L F93-32-Q F93-40-Q F94-40-Q Large Insulated Ferrules DIN End Sleeve Wire size AWG (mm 2), DIN color 1 – 1/0 (50) Blue: 1 – 1/0 (50) Blue: 2/0 (70) Yellow: 2/0 (70) Yellow: 3/0 (95) Red: 4/0 – 250 kcmil (120) Blue: 300 kcmil (150) Yellow: FSD87-20-L FSD87-25-Q FSD89-20-Q FSD89-27-Q FSD90-25-Q FSD91-27-Q FSD92-32-Q 6-Ton, In-Line Crimping Tool, Die Type, Lithium-Ion Powered Hydraulic Charger Voltage 120 VAC: 230 VAC: CT-3001 CT-3001/E Large Ferrule Crimping Dies Part Number Used with Tool* Wire Size (AWG) Wire Size (mm²) Ferrule Series Width A (In.) Width A (mm) Height Top B (In.) Height Top B (mm.) Height Bottom C (In.) Height Bottom C (mm) Depth (In.) Depth (mm) CD-2001-F87 CT-3001 1 AWG – 1/0 50.0 F87, FSD87 1.18 30.1 1.97 50.2 1.52 38.7 1.25 31.8 CD-2001-F89 CT-3001 2/0 70.0 F89, FSD89 1.18 30.1 1.93 49.0 1.52 38.7 1.25 31.8 CD-2001-F90 CT-3001 3/0 95.0 F90, FSD90 1.18 30.1 1.91 48.6 1.52 38.7 1.25 31.8 CD-2001-F91 CT-3001 4/0 – 250 kcmil 120.0 F91, FSD91 1.18 30.1 1.86 47.2 1.52 38.7 1.53 38.9 CD-2001-F92 CT-3001 300 kcmil 150.0 F92, FSD92 1.18 30.1 1.83 46.5 1.52 38.7 1.53 38.9 CD-2001-F93 CT-3001 350 kcmil 185.0 F93 1.18 30.1 1.75 44.5 1.58 40.1 1.53 38.9 CD-2001-F94 CT-3001 400 – 500 kcmil 240.0 F94 1.18 30.1 1.63 41.4 1.60 40.6 1.53 38.9 *Compatible with the CT-2001 and CT-3001/E B C A WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2014 Panduit Corp. All rights reserved. TMSP08--WW-ENG Replaces TMSP06--SA-ENG 5/2014