CFX3EI-X

Pan-Way ® LD Surface Raceway System S P E C I F I C AT I O N S H E E T specifications LD non-metallic single-channel, one-piece design, adhesive-backed, hinged-cover surface raceway, shall be used to route, protect, and conceal low-voltage data, voice, and video cabling. The raceway will include a full complement of bend radius control (BRC) and standard fittings consisting of, but not limited to: elbows (internal and external), couplings for joining raceway sections, blank end fittings for closing open ends of the raceway, entrance end fittings, reducer fittings, and tee fittings. The BRC fittings shall incorporate a minimum 1" bend radius, as recommended for Categories 5e, 6, 6A, and 6A (SD), UTP and fiber optic cables, in TIA/EIA-568-B. LD raceway will be manufactured in three different lengths from impact-resistant material with flammability rating of V-0. LD raceway finish shall be solid color, will resist scratches and dents, and will not peel or corrode. LD raceway shall be available in three sizes and four standard colors and shall be optimized for use with the Panduit ® Pan-Net ® Communication System. technical information LD Raceway Raceway: LD*IW**-A LD Raceway Fittings Coupler fitting: CFX*IW-X Inside corner fitting: ICFC*IW-X Outside corner: fitting: OCFC*IW-X Right angle fitting: RAFC*IW-X End cap fitting: ECFX*IW-X Tee fitting: TFC*IW-X Four-way cross fitting: CRFC5IW-X Material: Rigid PVC Drop ceiling/ entrance end fitting: DCF*IW-X Flammability: UL94 V-0 Right angle/ entrance end: RAEFXIW-X Colors: International White (IW), Electrical Ivory (EI), International Gray (IG), White (WH) LD5 to LD3 reducer fitting: RFX53IW-X CSI spec form: LP-CSISPEC-LD-1 LD10 to LD5 reducer fitting: RFX105IW-X LD10 to LD3 reducer fitting: RFX103IW-X LD5 fire box adapter: FBA5IW-X key features and benefits Available 1" bend radius control fittings Cables in the raceway will satisfy the minimum 1" bend radius requirement, preventing the potential degradation of cable performance; meets TIA/EIA standards One-piece hinged design Cables can be laid into the raceway, speeding installation and preventing damage to cables Adhesive backing for temporary mounting Installations are easier and faster, reducing the total installed cost Non-metallic construction Lightweight, reducing installer fatigue and labor required to install the raceway; solid color throughout will not chip, peel, rust or corrode; easy to cut with standard saws and saw blades, eliminating the need for special cutting devices Available in a variety of colors Matches various components in multiple applications applications Pan-Way ® LD Surface Raceway is a single-channel raceway which provides solutions for routing low-voltage, data and w w w. p a n d u i t . c o m fiber optic cabling along perimeter walls. LD raceway is available with standard and bend radius control fittings. LD10 fire box adapter: FBA10IW-X LD Raceway Installation Installation tool: LDW*-V * Insert raceway size of 3, 5, or 10 ** Insert raceway length of 6', 8', or 10' All parts listed in International White (IW) color. To order other colors substitute Electrical Ivory (EI), International Gray (IG), and White (WH). Pan-Way ® LD Surface Raceway System Wire Fill Fill Raceway Type Area and Configuration (in2) LD3 LD5 LD10 0.21 0.38 1.00 Electrical Cables Data Grade Cables 14 12 10 24 AWG/UTP CM AWG AWG AWG THHN/T90 Cat 5e – Plenum Cat. 6 Cat. 6A 0.111 0.130 0.164 DIA. = 0.193 DIA. = 0.24 DIA. = 0.30 FILL FILL FILL FILL MAX MAX MAX SPEC MAX SPEC MAX SPEC MAX (UL Temp Rise Test) 40% 60% 40% 60% 40% 60% ** ** ** 2 4 1 2 1 1 ** ** ** 5 7 3 5 2 3 ** ** ** 13 20 8 13 5 8 Cat. 6A (SD) DIA. = 0.24 FILL SPEC MAX 40% 60% 1 2 3 5 8 13 Audio/Video FIber Optic Cable RG6 DIA. = 0.275 FILL SPEC MAX 40% 60% 1 2 2 3 6 10 2 Strand DIA. = 0.175 FILL SPEC MAX 40% 60% 3 5 6 9 16 24 LD Raceway .94 [23.9] .58 [14.8] .46 [11.7] .50 [12.7] .77 [19.6] .70 [17.8] 1.01 [25.8] LD3 LD5 .055 [1.4] 1.00 [25.4] 1.51 [38.4] LD10 Fittings CFX ICFC OCFC RAFC ECFX TFC CRFC5 DCF RAEFX RFX FBA5 LDW WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2012 Panduit Corp. ALL RIGHTS RESERVED. SRSP21--WW-ENG Replaces WW-SRSP10 1/2013