B
MINI-COM ® Network Cabling System
The MINI-COM Network Cabling System follows
the belief that “smaller is better”. The overall height
and depth of the snap-in, modular connectors have
been reduced by over 20%. This decreases the
amount of space which is required for making cable
connections at the outlet or in the closet.
Key Features of the MINI-COM ® Network Cabling System Include:
Features
•
•
•
•
•
•
Modular design
Media independent
Broad range of solutions
TIA Standards compliant (where applicable)
20 Year Guarantee, U.L. Verification
Absolute modularity
Benefits
• Fast and easy moves, adds, and changes
• Modules for UTP, ScTP, coax, and single and duplex
Fiber Optic ports
• Complete system for flush (in-wall), modular furniture
and surface mount applications
• Compatible with all standards based networks
• Assurance of Category 5 performance
• Single modules allow individual port selection and
revision
Contact Factory for MOD-COM ™ Applications. Note: MINI-MOD ™ Adapter on page B37 snaps
MINI-COM Modules and OPTI-JACK ™ Fiber Connectors into MOD-COM Products.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B1
NETWORK CABLING SYSTEM
This miniaturization facilitates the design of
lower profile, higher density workstation
outlet and telecommunication closet
solutions.
®
The new MINI-COM Network Cabling System
B
offers innovative solutions for all your network
cabling applications. The system is designed to
maximize the performance of high speed
communication networks and minimize the installed
cost of network cabling systems. The MINI-COM
Network Cabling System was developed with the
input of architects and interior designers to provide
an aesthetically pleasing solution that complements
other key elements of the modern office workspace.
B
Table of Contents
Page
MINI-COM ® Faceplates
FACEPLATES
Sloped Executive Series Faceplate Kit . . . . . . . . . . . . . . . . . . . . . B3
NEW STYLES! Executive Series Bezels for Sloped, Flat
and Blank Module Inserts . . . . . . . . . . . . . . . . . . . . . . . . B4-B5
Executive Series Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . B6-B7
Executive Series Faceplate and Surface Box Screw Covers . . . . B8
Executive Series “GFCI” Faceplates . . . . . . . . . . . . . . . . . . . . . . . B8
NEW! Designer Series Sloped Faceplate Kit . . . . . . . . . . . . . . . . B9
NEW STYLES! Designer Series Bezels for Sloped, Flat and
Blank Module Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10
NEW! Designer Series Vertical Faceplates . . . . . . . . . . . . . B11-B12
NEW! Designer Series Horizontal Faceplates. . . . . . . . . . . . . . . B13
NEW! Designer Series “GFCI” and “106” Duplex Faceplates . . . B14
NEW! MINI-COM “GFCI” Module Frame . . . . . . . . . . . . . . . . . B15
NEW! MINI-COM “106” Frame . . . . . . . . . . . . . . . . . . . . . . . . . B16
NEW! MINI-COM In-Wall Fiber Spool . . . . . . . . . . . . . . . B17-B18
MINI-COM ® Snap-On Modular Furniture Faceplates
Snap-On Faceplates for Modular Furniture . . . . . . . . . . . . . B20-B22
NETWORK CABLING SYSTEM
MINI-COM ® Surface Mount Boxes
LOW PROFILE! NEW STYLES! Surface Mount Boxes. . . . B23-B26
Multi-Media/Fiber Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . B27-B28
MINI-COM ® Modules for UTP, ScTP,
Coax & Fiber
MINI-COM
®
MINI-JACK ™ Category 5 Modular Jacks for UTP . . . . . . B29-B30
NEW! MINI-JACK Micro-Cap . . . . . . . . . . . . . . . . . . . . . . . . . . B31
MINI-JACK Category 5 Shielded Modular Jacks for ScTP . . . B32
MINI-JACK Category 3 Modular Jacks for UTP. . . . . . . . B33-B34
BNC and F Type Bulkhead Coax Modules . . . . . . . . . . . . . . . . . B35
SC and ST Fiber Optic Modules . . . . . . . . . . . . . . . . . . . . . . . . . B35
NEW COLORS! RCA Connector and Coupler Modules . . . . . . . B36
Blank, NEW! SVHS Coupler, MINI-MOD ™ Adapter Modules . B37
MINI-COM ® Modular Patch Panels
See “Closet Products” Section . . . . . . . . . . . . . . . . . . . . . . . . . . . D1
B2
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
B
MINI-COM ®
Sloped Executive Series Faceplate
• Individual
modules
snap in and
out
• Excellent for
Category 5 or fiber
applications
• Executive faceplate
screw covers can be
used in place of
clear label holders
(ordered separately,
see page B8)
• Dual module
inserts are
front
releasable
• 6 decorator
colors
• Faceplate labels
see page Q25;
module labels see
page Q23.
• Screw mount
design
Modules - See page B29
Labels - See page Q23 , Q25
Note: Modules sold separately.
For use with MINI-COM Modules only.
Part
Number
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Description
4 Module Space, Single Gang Sloped Faceplate Kit*
B
CFPSE4IW
CFPSE4EI
CFPSE4IG
CFPSE4WH
CFPSE4BL
CFPSE4RD
Easy installation...modules snap
in quickly.
Single gang bezel and two sloped module
inserts (2 module spaces each). Supplied
with mounting screws, labels and label
holder/screw covers.
Depth to rear of modules: .65" (16.5)
ORDERING INFORMATION:
Order number of kits required, in multiples of Standard Package Quantity.
To order wall board adapter, see page B19.
*Kit includes one bezel (see page B4) and two sloped inserts (see page B5).
Front releasable inserts allow you to access both the
modules and the cable without unscrewing the faceplate
from the wall.
Sloped design protects cable connections and helps
maintain proper bend radius.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B3
EXECUTIVE SERIES FACEPLATES
MINI-COM Sloped Executive Series
Faceplates feature the aesthetic appeal of
the Executive Series faceplate, the technical
benefits of a sloped outlet, and the flexibility
of single snap-in modules. Additional benefits
of the sloped outlet include less depth
required inside walls, furniture, and
raceways, external protection at the modular
plug/jack interface, and gradual cable bend
radius for Category 5 and fiber applications.
Outlet accepts all MINI-COM Connector
Modules for Category 3 and 5 UTP, ScTP,
Coax and Fiber applications.OPTI-JACK ™
Fiber Connector Modules found on page E5.
B
MINI-COM ® Executive Series Bezels for Sloped,
Flat and Blank Module Inserts
B
MINI-COM Executive Series Bezels and
Module Inserts feature the aesthetic appeal
of the Executive Series faceplate and give
you even greater flexibility to customize your
installation. The module inserts allow you to
create sloped or flush outlets. You can even
mix or match the inserts to meet your exact
requirements. The new Bezels are available
in both single and double gang styles and
each insert accepts up to two MINI-COM
Snap-in Connector Modules for Category 3
and 5 UTP, ScTP, Coax and Fiber
applications. OPTI-JACK ™ Fiber
Connector Modules found on page E4 .
• Individual
modules
snap in
and out
• Excellent for
Category 5 or fiber
applications
• Executive
faceplate screw
covers can be
used in place of
clear label holders
(ordered
separately, see
page B8)
• Module Inserts
are front
releasable
• 6 decorator
colors
• Single or
double gang
styles
• Faceplate labels
see page Q25;
module labels see
page Q23.
• Screw mount
design
• Module inserts see page B5
Modules - See page B29
Labels - See page Q23 , Q25
Bezels
CBE
Description
Color
Std.
Pkg.
Qty.
Single gang bezel accepts two1/2 size
module inserts, three 1/3 size module
inserts or one 2/3 size and one 1/3 size
module inserts shown on the next page.
Supplied with mounting screws, labels and
label holder/screw covers.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Part
Number
Std.
Ctn.
Qty.
Single Gang Bezel
EXECUTIVE SERIES BEZELS
CBE-2G
CBEIW
CBEEI
CBEIG
CBEWH
CBEBL
CBERD
Double Gang Bezel
• Bezels accept snap-in module inserts as
shown on next page (sold separately)
• Colors can be mixed or matched to
complement any decor
• Allows you to customize your installation
with your choice of module inserts
You can create flush installations...
B4
CBEIW-2G
CBEEI-2G
CBEIG-2G
CBEWH-2G
CBEBL-2G
CBERD-2G
Double gang bezel which accepts up to four
1/2 size module inserts, six 1/3 size
modular inserts or two 2/3 size module
inserts and two 1/3 size module inserts
shown on the next page.
Supplied with mounting screws, labels and
label holder/screw covers.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
To order wall board adapter, see page B19.
Sloped installations...
...and mix or match module inserts.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
Module Inserts for
B
Executive Series Bezels
Part
Number
Description
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
10
10
10
10
10
10
50
50
50
50
50
50
2 Module Space, 1/2 size, Sloped Module Insert
Sloped module insert accepts up to two
MINI-COM Modules and accommodates
up to 1/2 of a single gang bezel.
Depth to rear of modules: .65" (16.5)
2 Module Space, 1/2 size, Sloped Module Insert with Protective Shutters
B
CHS2S
CHS2SIW-X
CHS2SEI-X
CHS2SIG-X
CHS2SWH-X
CHS2SBL-X
CHS2SRD-X
Sloped module insert with protective
shutters accepts up to two MINI-COM
Modules and accommodates up to 1/2 of a
single gang bezel. Shutters are spring
loaded and rotate out of the way for cable
connections.
Depth to rear of modules: .65" (16.5)
Off White
Elec. Ivory
Light Gray
White
Black
Red
10
10
10
10
10
10
50
50
50
50
50
50
Off White
Elec. Ivory
Light Gray
White
Black
Red
10
10
10
10
10
10
50
50
50
50
50
50
Off White
Elec. Ivory
Light Gray
White
Black
Red
10
10
10
10
10
10
50
50
50
50
50
50
Off White
Elec. Ivory
Light Gray
White
Black
Red
10
10
10
10
10
10
50
50
50
50
50
50
Off White
Elec. Ivory
Light Gray
Black
White
Red
10
10
10
10
10
10
50
50
50
50
50
50
Off White
Elec. Ivory
Light Gray
Black
White
Red
10
10
10
10
10
10
50
50
50
50
50
50
Off White
Elec. Ivory
Light Gray
Black
White
Red
10
10
10
10
10
10
50
50
50
50
50
50
2 Module Space, 1/2 size, Flat Module Insert
CHF2
CHF2IW-X
CHF2EI-X
CHF2IG-X
CHF2WH-X
CHF2BL-X
CHF2RD-X
Flat module insert accepts up to two
MINI-COM Modules and accommodates
up to 1/2 of a single gang bezel.
Depth to rear of modules: 1.0" (25.4)
2 Module Space, 1/2 size, Sloped, Recessed Module Insert
CHS2R
CHS2RIW-X
CHS2REI-X
CHS2RIG-X
CHS2RWH-X
CHS2RBL-X
CHS2RRD-X
CHB2
Accepts up to two MINI-COM Modules
and accommodates up to 1/2 of a single
gang bezel.
Depth to rear of modules: 1.125" (28.6)
1/2 size, Blank Module Insert
CHB2IW-X
CHB2EI-X
CHB2IG-X
CHB2WH-X
CHB2BL-X
CHB2RD-X
CHF2M
Blank module insert reserves space for
future modules and accommodates up to
1/2 of a single gang bezel.
2 Module Space, 1/3 Size Flat Module Insert
CHF2MIW-X
CHF2MEI-X
CHF2MIG-X
CHF2MBL-X
CHF2MWH-X
CHF2MRD-X
CHS2R2
Flat insert accepts up to two MINI-COM
Modules and accommodates 1/3rd of a
single gang bezel. Twelve ports maximum in
a double gang bezel.
Depth to rear of modules: 1.0" (25.4)
2 Module Space, 2/3 Size, Sloped, Recessed Module Insert
CHS2R2IW-X
CHS2R2EI-X
CHS2R2IG-X
CHS2R2BL-X
CHS2R2WH-X
CHS2R2RD-X
Accepts up to two MINI-COM Modules
and accommodates 2/3rd’s of a single
gang bezel. Offers the benefits of a sloped
module insert with added protection and
modularity.
Depth to rear of modules: 1.125" (28.6)
1/3 Size, Blank Module Insert
CHB2M
CHB2MIW-X
CHB2MEI-X
CHB2MIG-X
CHB2MBL-X
CHB2MWH-X
CHB2MRD-X
• Module Inserts accept MINI-COM Modules
and OPTI-JACK ™ Fiber Optic Connectors.
Blank module insert reserves space for
future modules and accommodates 1/3rd
of a single gang bezel.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B5
MODULE INSERTS
CHS2IW-X
CHS2EI-X
CHS2IG-X
CHS2WH-X
CHS2BL-X
CHS2RD-X
CHS2
B
MINI-COM ® Executive Series Faceplates
MINI-COM Executive Series Faceplates,
designed with the input of architects and
interior designers, provide an aesthetically
pleasing solution that complements the
modern office workspace. High density
single and double gang versions accept all
MINI-COM Connector Modules for
Category 3 and 5 UTP, ScTP, Coax and
Fiber applications. OPTI-JACK ™ Fiber
Connector Modules found on page E4.
• Executive faceplate
screw covers can
be used in place of
clear label holders
(ordered separately,
see page B8)
• Individual
modules
snap in and
out
• 6 decorator
colors
• Faceplate labels
see page Q25;
module labels see
page Q23.
• Screw mount
design
Note: Modules sold separately.
For use with MINI-COM modules only.
EXECUTIVE SERIES FACEPLATES
Modules - See page B29
Labels - See page Q23, Q25
1. Snap in terminated MINI-COM modules.
2. Install MINI-COM Executive Series
Faceplate.
3. Plug in cables for network, phone, fax, etc.
CFPE1
Part
Number
Description
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
1 Module Space, Single Gang Faceplate
CFPE1IW
CFPE1EI
CFPE1IG
CFPE1WH
CFPE1BL
CFPE1RD
CFPE2
Single gang faceplate holds a single
MINI-COM Connector Module. Supplied
with mounting screws, labels and label
holder/screw covers.
Depth to rear of modules: 1.0" (25.4)
2 Module Space, Single Gang Faceplate
CFPE2IW
CFPE2EI
CFPE2IG
CFPE2WH
CFPE2BL
CFPE2RD
Single gang faceplate holds up to two
MINI-COM Connector Modules. Supplied
with mounting screws, labels and label
holder/screw covers.
Depth to rear of modules: 1.0" (25.4)
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
To order wall board adapter, see page B19.
Faceplates are designed for vertical
mounting; however, they can be used for
horizontal mounting applications.
B6
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-COM ® Executive Series Faceplates
Note: Modules sold separately.
For use with MINI-COM Modules only.
Description
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
4 Module Space, Single Gang Faceplate
CFPE4IW
CFPE4EI
CFPE4IG
CFPE4WH
CFPE4BL
CFPE4RD
CFPE4
Single gang faceplate holds up to four
MINI-COM Connector Modules. Supplied
with mounting screws, labels and label
holder/screw covers.
Depth to rear of modules: 1.0" (25.4)
6 Module Space, Single Gang Faceplate
Note: Requires minimum opening of 1.9"W x 2.0"H (May not fit in all boxes - Check your box dimensions)
CFPE6IW
CFPE6EI
CFPE6IG
CFPE6WH
CFPE6BL
CFPE6RD
CFPE6
Single gang faceplate holds up to six
MINI-COM Connector Modules. Supplied
with mounting screws, labels and label
holder/screw covers.
Depth to rear of modules: 1.0" (25.4)
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
10 Module Space, Double Gang Faceplate
CFPE10IW-2G
CFPE10EI-2G
CFPE10IG-2G
CFPE10WH-2G
CFPE10BL-2G
CFPE10RD-2G
CFPE10
Faceplates are designed for vertical
mounting; however, they can be used for
horizontal mounting applications.
Double gang faceplate holds up to ten
MINI-COM Connector Modules. Supplied
with mounting screws, labels and label
holder/screw covers.
Depth to rear of modules: 1.0" (25.4)
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
To order wall board adapter, see page B19.
4 module space MINI-COM Executive Series Faceplate
handles cabling requirements for most typical workstations.
10 module space MINI-COM Executive Series Faceplate is
excellent for high density cabling applications.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B7
EXECUTIVE SERIES FACEPLATES
Part
Number
B
B
Screw Covers for Executive
Part
Number
Faceplate and Surface
Boxes
Description
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
10
10
10
10
10
10
50
50
50
50
50
50
Executive Faceplate and Surface Box Screw Cover
CSCIW-X
CSCEI-X
CSCIG-X
CSCWH-X
CSCBL-X
CSCRD-X
Screw cover has a textured surface. It blends Off White
in with the faceplates for improved aesthetics. Elec. Ivory
It snaps in quickly to speed installation.
Light Gray
White
Black
Red
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• Designed for use in place of clear label
covers
• Works with all single gang MINI-COM
Executive faceplates
Note: Screw cover can also be used with
MINI-COM 4 and 6 module space surface
mount boxes (see page B25) and 6 and 12
module space multi-media/fiber outlets (see
page B28)
1. Install MINI-COM
Executive Series Faceplate
2. Apply adhesive label to
inside of screw cover. See
page Q25 for labels.
3. Snap screw cover onto
faceplate
B
Executive Series “GFCI” Faceplates
EXECUTIVE SERIES FACEPLATES
Part
Number
ECPG
Description
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
1
1
1
1
1
1
10
10
10
10
10
10
Single Gang “GFCI” Faceplate
ECPGIW
ECPGEI
ECPGIG
ECPGWH
ECPGBL
ECPGRD
Accepts one MINI-COM GFCI Frame (See
page B15) or single, NEMA standard “GFCI”
switches or receptacles.
Supplied with screws.
Can be used with Panduit T70 Raceway for communications or power applications, see page K1.
NOTE: Not for use with wall board adapters
ECPG-2G
Double Gang “GFCI” Faceplate
ECPGIW-2G
ECPGEI-2G
ECPGIG-2G
ECPGWH-2G
ECPGBL-2G
ECPGRD-2G
Accepts two MINI-COM GFCI Frames (see
page B15) or two NEMA standard “GFCI”
switches or receptacles.
Supplied with screws.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
NOTE: Not for use with wall board adapters
• Stylish design matches Panduit
Executive Series communication
faceplates
• Designed for in-wall box applications
B8
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
Off White
Elec. Ivory
Light Gray
White
Black
Red
B
MINI-COM ® Sloped Designer Series Faceplates
• Individual
modules
snap in and
out
• Excellent for
Category 5 or fiber
applications
DESIGNER SERIES FACEPLATES
MINI-COM Sloped Designer Series
Faceplates feature the aesthetic appeal of
the Designer Series faceplate, the technical
benefits of a sloped outlet, and the flexibility
of single snap-in modules. Additional
benefits of the sloped outlet include less
depth required inside walls, furniture, and
raceways, external protection at the modular
plug/jack interface, and gradual cable bend
radius for Category 5 and fiber applications.
Outlet accepts all MINI-COM Connector
Modules for Category 3 and 5 UTP, ScTP,
Coax and Fiber applications. OPTI-JACK ™
Fiber Connector Modules found on page E4.
• Faceplate labels
see page Q25;
module labels see
page Q23
• Dual module
inserts are
front
releasable
• Screw mount
design
• 6 decorator
colors
Modules - See page B29
Labels - See page Q23, Q25
Note: Modules sold separately.
For use with MINI-COM Modules only.
Part
Number
Description
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
4 Module Space, Single Gang Sloped Faceplate Kit
CFPS4IW
CFPS4EI
CFPS4IG
CFPS4WH
CFPS4BL
CFPS4RD
Easy installation...modules snap
in quickly.
Single gang bezel and two sloped module
inserts (2 module spaces each). Supplied
with mounting screws.
Depth to rear of modules: .65" (16.5)
ORDERING INFORMATION:
Order number of kits required, in multiples of Standard Package Quantity.
To order wall board adapter, see page B19.
Front
Front releasable
releasable module
module inserts
inserts allow
allow you
you to
to access
access both
both
the
the modules
modules and
and the
the cable
cable without
without unscrewing
unscrewing the
the faceplate
faceplate
from
the
wall.
from the wall.
Sloped design protects cable connections and helps
maintain proper bend radius.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B9
B
MINI-COM ® Designer Series Bezels for Sloped,
Flat and Blank Module Inserts
MINI-COM Designer Series Bezels and
Module Inserts feature the aesthetic appeal
of the Designer Series Faceplate and even
greater flexibility to customize your
installation. The module inserts allow you to
create sloped or flush outlets. You can mix
or match the module inserts to meet your
exact requirements. The new Bezels are
available in both single and double gang
styles and each insert accepts up to two
MINI-COM Snap-in Connector Modules
for Category 3 and 5 UTP, ScTP, Coax and
Fiber applications. OPTI-JACK ™ Fiber
Connector Modules found on page E4.
Bezels
CB
• Individual
modules
snap in and
out
• Single or
double gang
styles
• Excellent for
Category 5 or fiber
applications
• Module inserts
are front
releasable
• Faceplate labels
seepage Q25;
module labels see
page Q23
• 6 decorator
colors
Modules - See page B29
Labels - See page Q29
Q25
Part
Number
Description
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
DESIGNER SERIES FACEPLATES
Single Gang Bezel
CB-2G
CBIW
CBEI
CBIG
CBWH
CBBL
CBRD
Single gang bezel accepts two1/2 size
module inserts, three 1/3 size module
inserts or one 2/3 size and one 1/3 size
module inserts shown on page B9.
Supplied with mounting screws.
Double Gang Bezel
• Bezels accept snap-in module
inserts as shown on page B5 (sold
separately)
• Colors can be mixed or matched to
complement any decor
• Allow you to customize your installation
with your choice of inserts
You can create flush installations...
B10
CBIW-2G
CBEI-2G
CBIG-2G
CBWH-2G
CBBL-2G
CBRD-2G
Double gang bezel accepts up to four 1/2
size module inserts, six 1/3 size module
inserts or two 2/3 size module inserts and
two 1/3 size module inserts shown on page
B9. Supplied with mounting screws.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
To order wall board adapter, see page B19.
Sloped installations...
Mix or match module inserts. There’s
even a blank to reserve space for future
needs.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-COM ® Designer Series Vertical Faceplates
• Individual
modules
snap in and
out
• Faceplate labels
see page Q25;
module labels see
page Q23
• 6 decorator
colors
Note: Modules sold separately.
For use with MINI-COM modules only.
1. Snap in terminated MINI-COM modules.
Modules - See page B29
Labels - See page Q23, Q25
2. Install MINI-COM Designer Series
Faceplate.
3. Plug in cables for network, phone, fax, etc.
CFP1
Part
Number
Description
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
1 Module Space, Single Gang Faceplate
CFP1IW
CFP1EI
CFP1IG
CFP1WH
CFP1BL
CFP1RD
Single gang faceplate holds a single
MINI-COM Connector Module. Supplied
with mounting screws.
Depth to rear of modules: 1.125" (28.6)
2 Module Space, Single Gang Faceplate
CFP2
CFP2IW
CFP2EI
CFP2IG
CFP2WH
CFP2BL
CFP2RD
Faceplates are designed for vertical
mounting; however, they can be used for
horizontal mounting applications. See
page B13 for our NEW two and four
module space horizontal faceplates.
Single gang faceplate holds up to two
MINI-COM Connector Modules. Supplied
with mounting screws.
Depth to rear of modules: 1.125" (28.6)
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
To order wall board adapter, see page B19.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B11
DESIGNER SERIES FACEPLATES
MINI-COM Designer Series Faceplates,
provide an economical, aesthetically pleasing
solution that compliments the modern office
workplace. High density single and double
gang versions accept all MINI-COM
Connector Modules for Category 3 and 5
UTP, ScTP, Coax and Fiber applications.
OPTI-JACK ™ Fiber Connector Modules
found on page E4.
B
MINI-COM ® Designer Series Faceplates (cont.)
Part
Number
CFP4
Description
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
4 Module Space, Single Gang Faceplate
CFP4IW
CFP4EI
CFP4IG
CFP4WH
CFP4BL
CFP4RD
CFPF6
Depth to rear of modules: 1.125" (28.6)
6 Module Space, Single Gang Faceplate Kit
CFPF6IW
CFPF6EI
CFPF6IG
CFPF6WH
CFPF6BL
CFPF6RD
Single gang bezel and three flat module
inserts (2 module spaces each). Supplied
with mounting screws.
Depth to rear of modules: 1.125" (28.6)
12 Module Space, Double Gang Faceplate Kit
CFPF12
DESIGNER SERIES FACEPLATES
Single gang faceplate holds up to four
MINI-COM Connector Modules. Supplied
with mounting screws.
CFPF12IW-2G
CFPF12EI-2G
CFPF12IG-2G
CFPF12WH-2G
CFPF12BL-2G
CFPF12RD-2G
Double gang bezel and six flat module
inserts (2 module spaces each). Supplied
with mounting screws.
Depth to rear of modules: 1.125" (28.6)
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
To order wall board adapter, see page B19.
Note: Modules sold separately.
For use with MINI-COM Modules only.
6 Module space version features front
access for fast moves, adds and
changes
B12
12 Module space version features front
access and high density
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-COM ® Designer Series Horizontal Faceplates
• 6 decorator
colors
Modules - See page B29
Labels - See page Q25
Note: Modules sold separately.
For use with MINI-COM modules only.
CFPH2
Part
Number
Description
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
2 Module Space, Horizontal Single Gang Faceplate
CFPH2IW
CFPH2EI
CFPH2IG
CFPH2WH
CFPH2BL
CFPH2RD
CFPH4
Single gang horizontal faceplate holds up
to two MINI-COM Connector Modules.
Supplied with mounting screws.
Depth to rear of modules: 1.125" (28.6)
4 Module Space, Horizontal Single Gang Faceplate
CFPH4IW
CFPH4EI
CFPH4IG
CFPH4WH
CFPH4BL
CFPH4RD
Single gang horizontal faceplate holds up
to four MINI-COM Connector Modules.
Supplied with mounting screws.
Depth to rear of modules: 1.125" (28.6)
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
To order wall board adapter, see page B19.
Faceplates are designed for horizontal mounting applications.
Panduit T-70 Raceway shown here. See page K4.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B13
DESIGNER SERIES FACEPLATES
MINI-COM Designer Series Faceplates,
provide an economical, aesthetically
pleasing solution that complements the
modern office workplace. High density
single gang versions accept all
MINI-COM Connector Modules for
Category 3 and 5 UTP, ScTP, Coax and
Fiber applications.OPTI-JACK ™ Fiber
Connector Modules found on page E4 .
• Module
labels see
page Q23.
• Individual
modules
snap in and
out
B
B
Designer Series “GFCI”
Faceplate
Part
Number
CPG
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
—
1
10
—
1
10
Description
Single Gang “GFCI” Faceplate
CPGIW
CPGEI
CPGIG
CPGWH
CPGBL
CPGRD
Accepts one MINI-COM GFCI Module
Frame (see page B15) or single, NEMA
standard “GFCI” switches or receptacles.
Supplied with screws.
Double Gang “GFCI” Faceplate
CPG-2G
CPGIW-2G
CPGEI-2G
CPGIG-2G
CPGWH-2G
CPGBL-2G
CPGRD-2G
Accepts two MINI-COM GFCI Module
Frames (see page B15) or two NEMA
standard “GFCI” switches or receptacles.
Supplied with screws.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
NOTE: Not for use with wall board adapters
• Stylish design matches Panduit Designer
Series communication faceplates
• Designed for in-wall applications
Designer Series “106”
Duplex Faceplate
Part
Number
Description
Single Gang “106” Duplex Faceplate
DESIGNER SERIES FACEPLATES
CP106
CP106IW
CP106EI
CP106IG
CP106WH
CP106BL
CP106RD
Double Gang “106” Quad Faceplate
CP106-2G
CP106IW-2G
CP106EI-2G
CP106IG-2G
CP106WH-2G
CP106BL-2G
CP106RD-2G
• Stylish design matches Panduit Designer
Series communication faceplates
• Designed for in-wall applications
Stainless Steel “106”
Duplex Faceplates
Accepts one MINI-COM “106” Module
Frame (see page B16) or single “106”
switches or receptacles. Supplied with one
screw.
Accepts two MINI-COM “106” Module
Frames (see page B16) or two single “106”
switches or receptacles. Supplied with
screws.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
NOTE: Not for use with wall board adapters
Part
Number
Description
Single Gang Stainless Steel “106” Duplex Faceplate
WPS-20
Accepts one MINI-COM 106 Frame (see
page B16) or single “106” switches or
receptacles. Supplied with one screw.
Double Gang Stainless Steel "106" Duplex Faceplate
WPS-202
Accepts two MINI-COM 106 Frames (see
page B16) or two single "106" switches or
receptacles. Supplied with screws.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
B14
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-COM ® “GFCI” Module Frames
• Change
only the
modules
required;
Modules
snap in
or out
individually
• Module labels
see page Q23
• Mounts behind
all standard
NEMA
faceplates
• Made from
impact resistant
thermoplastic
• 6 decorator
colors to
complement any
decor
Executive Series “GFCI” Faceplates found on
page B8 and Designer Series “GFCI”
Faceplates found on page B14 .
Modules - See page B29
Labels - See page Q23, Q25
CFG1
Part
Number
Description
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
One Module Space “GFCI” Module Frame
CFG1IW
CFG1EI
CFG1IG
CFG1WH
CFG1BL
CFG1RD
Mounts behind any standard GFCI electrical
faceplate. Holds a single MINI-COM
Connector Module.
Depth to rear of modules: 1.125" (28.6)
Note: Modules sold separately.
For use with MINI-COM Modules only.
CFG2
Part
Number
Description
Two Module Space “GFCI” Module Frame
CFG2IW
CFG2EI
CFG2IG
CFG2WH
CFG2BL
CFG2RD
Mounts behind any standard GFCI electrical
faceplate. Holds two MINI-COM Connector
Modules.
Depth to rear of modules: 1.125" (28.6)
CFG4
Part
Number
Description
Four Module Space “GFCI” Module Frame
CFG4IW
CFG4EI
CFG4IG
CFG4WH
CFG4BL
CFG4RD
Mounts behind any standard GFCI electrical
faceplate. Holds four MINI-COM Connector
Modules.
Depth to rear of modules: 1.125" (28.6)
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B15
“GFCI” MODULE FRAMES
The MINI-COM “GFCI” Module Frames allow you
to use any standard GFCI faceplate to cover your
communications outlet. MINI-COM “GFCI”
Module Frames provide solutions for special
communication applications such as power/
telephone, poles, tombstones and in-floor boxes
and accepts 1, 2 or 4 MINI-COM Snap-in
Connector Modules for Category 5 UTP, ScTP,
Coax and Fiber applications. OPTI-JACK ™ Fiber
Connector Modules found on page E4. Use with
B
MINI-COM ® “106” Duplex Module Frame
The MINI-COM “106” Duplex Module Frame
allows you to use any standard 106 electrical
faceplate to cover your communications outlet.
It mounts behind all “106” standard NEMA
faceplates including stainless steel, brass,
wood-grained or plastic materials. The
MINI-COM “106” Module Frame provides
solutions for special communication
applications such as communication/power
poles, tombstones and in-floor boxes. It
accepts 4 MINI-COM Snap-in Connector
Modules for Category 5 UTP, ScTP, Coax and
Fiber Optic applications. OPTI-JACK ™ Fiber
Connector Modules found on page E4. Use
with Designer Series “106” Duplex Faceplates
found on page B14.
• Change only
the modules
required;
Modules snap
in or out
individually
• Module labels
see page Q23
• Mounts behind
all “106”
standard NEMA
faceplates
• Made from
impact resistant
thermoplastic
• 6 decorator
colors to
complement any
decor
Modules - See page B29
Labels - See page Q23
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Red
1
1
1
1
1
1
10
10
10
10
10
10
CF1064
Part
Number
Description
“106” DUPLEX MODULE FRAMES
Four Module Space “106” Duplex Module Frame
CF1064IW
CF1064EI
CF1064IG
CF1064WH
CF1064BL
CF1064RD
• Accepts up to four MINI-COM Snap-in
Connector Modules
Mounts behind any “106” duplex standard
NEMA electrical faceplate. Holds four
MINI-COM Connector Modules.
Depth to rear of modules: 1.125" (28.6)
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
Note: Modules sold separately.
For use with MINI-COM Modules only.
B16
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-COM ® In-Wall Fiber Spool
• Cable entry/exit from rear, top and
bottom helps maintain external bend
radius
• 3.65" (92.7mm) depth from rear of
faceplate. Not for use with in-wall
boxes or in shallow walls. If depth is not
adequate see Multimedia Boxes shown
on page B27 to page B28.
• Designed for use with single or double
gang wall board adapter. See page B19.
• Stores up to 12 meters of unjacketed
fiber cable or 2 meters of jacketed fiber
cable.
Standards: TIA/EIA-568-A requires a
minimum 1 meter slack and a fiber spool
for in-wall installations.
Part
Number
Description
Color
Std.
Pkg.
Qty
Std.
Ctn.
Qty.
1
10
Two Module In Wall Fiber Spool
CFS2IW
CFS2EI
CFS2IG
CFS2WH
CFS2BL
CFS2RD
Two piece fiber spool for use with most
MINI-COM faceplates, bezels and inserts.
See page B18 to determine which
combination best fits the application.
Off White
Elec. Ivory
Light Gray
White
Black
Red
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• Fiber spool can be mounted into
many different faceplate
configurations providing custom
fit capabilities
• Fiber spool can be used with our
modular patch panels see page
D3 and page D4.
• Together with our recessed and
sloped inserts, the fiber spool
provides complete TIA/EIA-568-A
compliance
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B17
MINI-COM ® IN-WALL FIBER SPOOL
• 1" internal bend radius
MINI-COM In-Wall Fiber Spool (patent
pending) provides storage for excess and
slack fiber in flush, sloped and sloped
recessed outlet applications as required in
TIA/EIA 568-A. The two module space spool
snaps into a variety of MINI-COM
Faceplates and Bezels for optimum flexibility
and modularity in multi-media environments.
Ideal for use in fiber to desk applications with
the OPTI-JACK ™ Fiber Connector
Modules found on page E4.
B
MINI-COM ® In-Wall Fiber Spool (cont.)
• The fiber spool requires a minimum depth of 3.65"
(92.7 mm) from rear of faceplate in all cases.
• Designed for use with wall board adapters. Not
recommended for use with shallow in-wall boxes or
shallow walls.
• Contact factory for specific application questions if
your particular application is not listed.
Faceplate
Part Numbers
Application
Application
CBE**
(See page B4) or
CB**
(See page B10)
2 CHF**-X
(See page B5)
Need a minimum
depth of 3.65"
(92.7mm)
CFPE6**
(See page B7)
Need a minimum
depth of 3.65"
(92.7mm).
CBE**
(See page B4) or
CB**
(See page B10)
1 CHF2**-X,
1 CHS2(S)**-X
or CHSR2**-X
(See page B5)
Need a minimum
depth of 3.65"
(92.7mm). The
CHS2(S) or CHSR2
insert must be
mounted above the
CHF2 insert. The
spool must be
mounted into the
CHF2 insert.
CFPE10**-2G
(See page B7)
Need a minimum
depth of 3.65"
(92.7mm).
CBE**
(See page B4) or
CB**
(See page B10)
1 CHF2M**or
1 CHS2R2**-X
(See page B5)
Need a minimum
depth of 3.65"
(92.7mm). The
CHS2R2 insert must
be mounted above
the CHF2M insert.
The spool must be
mounted into the
CHF2M insert
CFPH4**
(See page B13)
Need a minimum
depth of 3.65"
(92.7mm).
CBE**
(See page B4) or
CB**
(See page B10)
2 CHF2M**-X or
1 CHB2M**-X
(See page B5)
Need a minimum
depth of 3.65"
(92.7mm). The
CHB2M insert must
be mounted between
the two CHF2M
inserts
CFG4**
(See page B15)
CF1064**
(See page B16
Need a minimum
depth of 3.65"
(92.7mm).
CFPE4 (See
page B7) or
CFP4
(See page B12)
Need a minimum
depth of 3.65"
(92.7mm).
MINI-COM
®
IN-WALL FIBER SPOOL
Faceplate
Part Numbers
• Only single gang applications are shown. The same
restrictions apply to the one side of double gang
faceplates on which the spool is mounted.
• Fiber spool can not be mounted into sloped inserts
or sloped faceplates.
NOTE: The Fiber Spool can also be used with all 24 port and higher modular patch panels except CP24WSBL,
CP48WSBL and CP72BL found on page D4.
The Fiber Spool can not be used with modular patch panels that are used with the FMT24 found on page D25.
B18
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
Wall Board Adapters
MWBA1
Part Number
Description
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1
10
1
10
Std.
Ctn.
Qty.
Single Gang Wall Board Adapter
MWBA1
MWBA-2G
Replacement for single gang in-wall box in communication
applications.
Mounting hole spacing of 3.28" (83.5mm).
Double Gang Wall Board Adapter
Replacement for double gang in-wall boxes in
communication applications.
Mounting hole spacing of 3.28" (83.5mm).
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
NOTE: Contact factory for optional installation template.
In-Wall Box Adapters
MIWBA
Description
Color
Std.
Pkg.
Qty.
Allows mounting of MINI-COM single
gang faceplates and surface boxes to
double gang in-wall boxes and box
eliminators, both horizontally and vertically.
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1
10
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1
10
Part Number
MIWBAIW
MIWBAEI
MIWBAIG
MIWBAWH
MIWBABL
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
In-Floor Adapter Plate
Part Number
Description
In-Floor Box Adapter Plate
MIFBA
Allows MINI-COM single gang faceplates to be mounted
to Walker in-floor boxes.
Part No. AF3
Two adapter plates will fit into one Walker box.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• Accepts single gang designer or executive faceplates. See page B3 and page B9.
• Up to six connector modules per faceplate
Tombstone (Floor Box) Adapter Plate
Part Number
Description
Tombstone Adapter Plate
MSP500W
Allows MINI-COM Snap-In Modular Furniture Faceplates
to be mounted to Walker floor box service fitting Part No.
500 (Tombstone).
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• Accepts snap-on modular furniture faceplates
See page B20.
• Up to four connector modules per faceplate
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B19
ACCESSORIES
MWBA-2G
B
MINI-COM ® Snap-On Modular Furniture Faceplate
The MINI-COM Snap-On Faceplate snaps
directly into “industry standard” communications
openings on most modular office furniture. The
faceplate is the highest density in the industry
(four module spaces) and features an aesthetically
pleasing design and smooth finish that blend in
with the furniture.
Modular furniture must be flexible to meet the demands
of today’s efficient open office. Use MINI-COM Snap-on
Faceplates to ensure that your network cabling system is
just as flexible.
Faceplate snaps into “industry standard” opening with panel
cutout specified below. Consult factory for specific furniture
manufacturer’s opening sizes or solutions for other opening sizes.
• 11 decorator
colors to
complement
any decor
• High density
design;
accepts
up to 4 snap-in
MINI-COM
modules
Panel Cutout Requirements
• Accepts MINI-COM Modules for
UTP (including Category 5), Fiber
Optic and Coax cables
1.345" to 1.405"
Modules - See page B29
Labels - See page Q23, Q25
SNAP IN FACEPLATES
2.670" to 2.750"
Maximum Panel Thickness: .090"
Part
Number
CFFP4
Description
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1
1
1
1
1
10
10
10
10
10
Color
4 Module Space Modular Furniture Snap-On Faceplate
CFFP4IW
CFFP4EI
CFFP4IG
CFFP4WH
CFFP4BL
Faceplate snaps into knockouts found on
modular furniture.Holds four standard
connector modules.
Depth to rear of modules: .972" (24.7mm)
Note: Modules sold separately. For use with
MINI-COM Modules only.
Part
Number
Description
2 Module Space Angled Modular Furniture Snap-On Faceplate
CFFPA2IW
CFFPA2EI
CFFPA2IG
CFFPA2WH
CFFPA2BL
Faceplate snaps into knockouts found on
modular furniture.Holds two standard
connector modules.
Depth to rear of modules: .600" (15.2mm)
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
B20
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
Off White
Elec. Ivory
Light Gray
White
Black
B
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Black
1
10
MFFPE
Part Number
Description
Snap-On Modular Furniture Faceplate Extender
MFFPEIW
MFFPEEI
MFFPEIG
MFFPEWH
MFFPEBL
For use when depth inside modular
furniture base is limited. Extends
plate approximately 1/2". Accepts all
Panduit modular faceplates.
Fits into same breakout size as CFFP
faceplate found on page B20.
Herman Miller Adapter
MFFPHMBL
Part Number
Description
Punch Die
MFFPHMBL
• For use with Herman Miller modular
furniture with 3" x 1.875" opening
Adapter to use MINI-COM CFFP snap-on
faceplates with Herman Miller modular furniture.
Converts a 3" x 1.875" opening into a 2.688" x
1.375" (68.58mm x 35.05mm) opening.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
Punch Die
MFFD
Part Number
Description
Std.
Pkg.
Qty.
Punch Die
MFFD
Punch Die cuts a rectangular hole in base of modular furniture to
accept MINI-COM CFFP snap-on faceplates found on page B20.
1
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• For use with plastic or metal furniture.
Requires hydraulic driver such as a
GreenLee #7804SB.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B21
ACCESSORIES
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
B
MINI-COM ® Modular Furniture Cabling Solutions
MODULAR FURNITURE CABLING SOLUTIONS
Choose from a wide variety of MINI-COM Outlet Products used in modular furniture cabling applications.
Many of these products provide bend radius and exit protection for both copper and fiber cables. The following
are examples of these products used in a wide array of open office environments. Options vary by modular
furniture system design. Contact factory or consult your modular furniture manufacturer for more information.
The gradual bend radius provided by this
four module space single gang sloped
faceplate (See page B3) is excellent for
vertical applications above the desktop of
modular furniture. Single gang opening
required.
The high density of this four module space
snap-on modular furniture faceplate (See
page B20) is recommended for cable
intensivemodular furniture installations.
TIA/EIA standard opening required.
The gradual bend radius provided by this
two module space angled snap-on modular
furniture faceplate (See page B20) is
excellent for horizontal applications at the
base of modular furniture. TIA/EIA
standard opening required.
The sleek look and parallel cable exit of
this surface mount box (See page B25)
blends in and provides cable protection.
This solution is ideal for horizontal
applications at the base of modular
furniture.
The high density of this four module space
snap-in modular furniture faceplate (See
page B20) is recommended for cable
intensive modular furniture installations.
TIA/EIA standard opening required.
The gradual bend radius provided by this
two module space angled snap-on modular
furniture faceplate (See page B20) is
excellent for vertical applications above the
desktop of TIA/EIA standard opening
required.
The high density, low profile design of this
multimedia outlet (see page B28) is ideal
for copper and fiber terminations inside
modular furniture panels.
B22
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-COM ® Surface Mount Boxes
• Cable entry
from side
and rear
knockouts
and from
opening in
base
• Extremely low profile design:
.91"H (23.1mm) x 1.77"W (45mm) x 2.44"L (62mm)
• Surface box
labels see
page Q27 to
page Q28.
• 5 decorator
colors to
complement
any decor
• Accepts MINI-COM Modules for
UTP (including Category 5), Fiber
Optic and Coax cables.
Simply snap a terminated
MINI-COM Module into the
base, snap on the cover and
plug in the cables! Now you
have a compact, attractive
and versatile workstation
outlet. To add a second
module, simply break out
the pre-molded blank and
snap in an additional
module.
All boxes supplied with base and snap-on cover.
Part
Number
CBXJ2
SURFACE MOUNT BOXES
MINI-COM One/Two Module Space Surface
Mount Box is the smallest, lowest profile outlet
of its kind. It accepts one or two MINI-COM
Modules. This innovative box includes a blank
molded directly into the cover. To add a second
module simply break out the blank. The
versatile box can be wall mounted with screws
or adhesive or mounted to metal desks or file
cabinets with an optional magnet. The
MINI-COM Surface Mount Box is excellent for
voice and data applications.
• Mounts easily with
screws, adhesive
tape or magnet
Modules - See page B29
Raceway - See page H15
Labels - See page Q23, Q27-Q28
Description
Color
Can Be
Used With
Std. Std.
PAN-WAY ™ Pkg. Ctn.
Raceway*
Qty. Qty.
2 Module Space Surface Mount Box
CBXJ2IW-A
CBXJ2EI-A
CBXJ2IG-A
CBXJ2WH-A
CBXJ2BL-A
Note: Modules sold separately.
For use with MINI-COM Modules only.
Surface mount box holds up to two
MINI-COM Connector Modules.
Supplied with adhesive backing.
Off White
Elec. Ivory
Light Gray
White
Black
LDP5, LD5,
CD5
1
1
1
1
1
10
10
10
10
10
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
*Note: Raceway listed above can be mounted flush with 2 module space box, however, CBX2 on
page B24 is recommended for use with Panduit PAN-WAY Raceway for in-box installation.
Optional Magnet available, see page B26.
Versatile box mounts on furniture...
Can be used for raceway applications...
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B23
B
MINI-COM ® Surface Mount Boxes
One/Two Module Space Surface Mount Box is
low profile and includes a blank molded directly
into the cover. To add a second module simply
break out the blank. Use with Panduit
PAN-WAY ™ LD3, LD5, CD3 or CD5 raceway.
Raceway goes directly into the box, enhancing
the professional look of your application. Box
can be wall mounted with screws or adhesive or
mounted to metal desks of file cabinets with an
optional magnet. Excellent for voice and data
applications.
• Cable entry
accessed
from both
sides and
rear
knockouts
and from
opening in
base
• Surface box
labels see
page Q27page Q28.
• Surface box dimensions:
1.06"H (27mm) X 1.95"W (50mm) X 3.65"L (93mm)
• 5 decorator
colors to
complement
any decor
• Accepts MINI-COM Modules for UTP (including
Category 5), Fiber Optic cables and Coax cables.
Simply run raceway into
base and break out
cover knockout. Route
cable and terminate
MINI-COM Module(s)
and snap into place.
Modules - See page B29
Raceway - See page H11
Labels - See page Q23, Q27-Q28
CBX2
Part
Number
Description
Color
Can Be
Used With
Std. Std.
PAN-WAY ™ Pkg. Ctn.
Raceway*
Qty. Qty.
2 Module Space Surface Mount Box
SURFACE MOUNT BOXES
CBX2IW-A
CBX2EI-A
CBX2IG-A
CBX2WH-A
CBX2BL-A
Surface mount box holds up to two
MINI-COM Connector Modules.
Supplied with adhesive backing.
Off White
Elec. Ivory
Light Gray
White
Black
LDP3, LD3,
CD3, LDP5,
LD5, CD5
1
1
1
1
1
10
10
10
10
10
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
Optional Magnet available, see page B26.
Versatile box mounts on furniture...
B24
Perfect for surface raceway applications...
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-COM ® Surface Mount Boxes
• Cable entry
from side and rear
knockouts and from
opening in
bottom of base
• Combination label
holder/screw cover
for custom
identification
• Extremely low profile design
• Tamper resistant
screw for added
security
• Surface box labels
see page Q27 to
page Q28
• Mounts easily with
screws, adhesive
tape or magnet
• Surface box screw
covers can be used in
place of clear label
holders (ordered
separately, see
page B8)
• 5 decorator colors
to complement
any decor
• Accepts MINI-COM Modules for UTP (including Category 5), Coax cables and
OPTI-JACK ™ Fiber Connector Modules found on page E4.
Note: Modules sold separately.
For use with MINI-COM Modules only.
Modules - See page B29
Raceway - See page H11
Labels - See page Q23, Q27-Q28
CBX4
Part
Number
Description
Color
Can Be
Used With
Std.
PAN-WAY ™ Pkg.
Raceway*
Qty
Std.
Ctn.
Qty.
4 Module Space Surface Mount Box
CBX4IW-A
CBX4EI-A
CBX4IG-A
CBX4WH-A
CBX4BL-A
• Provides slots that accept cable ties for
strain relief. See page R1 for cable tie
part numbers.
• Provides bend radius control
• 4 Module Box 1.1"H (28mm) x 2.9"W (74mm) x 4.5"L (114mm)
CBX6
Surface mount box holds up to four
MINI-COM Connector Modules.
Supplied with mounting screws,
adhesive backing and label holder/
screw cover.
Off White
Elec. Ivory
Light Gray
White
Black
LD3, CD3,
LD5, CD5
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
10
10
10
10
10
6 Module Space Surface Mount Box
CBX6IW-A
CBX6EI-A
CBX6IG-A
CBX6WH-A
CBX6BL-A
Surface mount box holds up to six
MINI-COM Connector Modules.
Supplied with mounting screws,
adhesive backing and label holder/
screw cover.
Off White
Elec. Ivory
Light Gray
White
Black
LD3, CD3,
LD5, CD5
• Provides slots that accept cable ties for strain relief
• 6 Module Box .91"H (23mm) x 4.91"W (125mm) x 3.25"L (83mm)
12 Module Space Surface Mount Box
CBX12
CBX12IW-A
CBX12EI-A
CBX12IG-A
CBX12WH-A
CBX12BL-A
Surface mount box holds up to twelve
MINI-COM Connector Modules.
Supplied with mounting screws
adhesive backing and label holder/
screw cover.
Off White
Elec. Ivory
Light Gray
White
Black
LD5, CD5,
LD10, CP10
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• 12 Module Box1.035"H (26mm) x 5.71"W (145mm) x 5.45"L (138mm)
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B25
SURFACE MOUNT BOXES
MINI-COM four, six and twelve
module space Surface Mount Boxes
feature a low profile design. They
provide an excellent solution for
high density applications and allow
for optimum flexibility at the
workstation outlet. These boxes can
be wall mounted with screws or
adhesive or mounted to metal
desks or file cabinets with an
optional magnet. MINI-COM
Surface Mount Boxes can also be
used with PAN-WAY ™ Raceway
for surface mount applications.
B
CBM-X
Part
Number
Description
Std. Std.
Pkg. Ctn.
Qty Qty.
Optional Magnet
B
CBM-X
Optional magnets snap into box base for mounting to metal desks or
file cabinets. (Two magnets per box recommended)
10
100
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
No adapters are required.
SURFACE MOUNT BOXES
Mounts to a single gang opening to provide a
high density in-wall solution...
Mounts easily to metal desks, modular
furniture panels or cabinets with optional
magnets...
Use with PAN-WAY ™ Raceway for surface
mount applications...
Provides the highest density surface mount
solution, designed to be compact and low
profile
B26
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-COM ® Multi-Media/Fiber Surface Mount Boxes
• Accepts MINI-COM Modules for
UTP (including Category 5),
Fiber Optic cables, Coax cables
and OPTI-JACK ™ Fiber
Connector Modules found on
page E4.
• Slots accept
cable ties for
cable
management
• Mounts easily
with screws or
adhesive tape
• Tamper
resistant
screw for
added security
• 5 decorator
colors to
complement
any decor
• Built-in fiber
spool stores
up to 78.8 feet
(24 meters) of
buffered fiber
optic cable
Note: Modules sold separately.
For use with MINI-COM Modules only.
• Unique fiber
spool design
secures
cable in place
• Cable entry from side and rear
knockouts and from opening in
bottom of base
• Surface box screw covers can be
used in place of clear label holders
(ordered separately, see page B8)
Standards Tip: TIA/EIA-568A requires a
minimum 1 meter slack and a fiber spool.
The low profile design is ideal for fiber optic
as well as all multi-media applications. The
built in fiber spool maintains the
recommended minimum bend radius for fiber
optic and Category 5 cables.
When additional capacity is required, the box
can be easily upgraded with the Fiber Outlet
Kit. The bridge snaps on to the existing outlet
base to create twelve total ports doubling the
capacity. Ideal for the telecommunications
closet or workstation outlet.
• Splicing
capacity
available
Modules - See page B29
Raceway - See page H11
Labels - See page Q23, Q27-Q28
The cover snaps on and is secured with a
tamper resistant screw. The MINI-COM
Multi-Media/Fiber Outlet provides an
aesthetically pleasing outlet that can be used
for in-wall or surface cabling applications.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B27
SURFACE MOUNT BOXES
MINI-COM 6 and 12 module
space, low profile, Multi-Media/Fiber
Boxes feature a built-in spool to
store excess fiber as required in
TIA-568A. They provide an excellent
solution for high density applications
and allow for optimum flexibility at
the workstation outlet. These can be
wall mounted over single gang,
double gang and DIN sized
openings with screws or adhesive.
MINI-COM Multi-Media/Fiber
Outlets can also be used with
PAN-WAY ™ Raceway for surface
mount applications.
• Multi-Media/Fiber Box dimensions:
6 Module Outlet .99"H (25mm) x 4.71"W (120mm) x 6.67"L (170mm)
12 Module Outlet 1.81"H (46mm) x 4.71"W (120mm) x 6.67"L (170mm)
B
MINI-COM ® Multi-Media/Fiber Surface Mount Boxes
CBXF6
Part
Number
Description
Color
Can Be
Used With
Std. Std.
PAN-WAY ™ Pkg. Ctn.
Raceway
Qty Qty.
6 Module Space Multi-Media/Fiber Boxes
CBXF6IW-A
CBXF6EI-A
CBXF6IG-A
CBXF6WH-A
CBXF6BL-A
CBXF12
Surface mount box holds up to six
MINI-COM Connector Modules or six
OPTI-JACK ™ Fiber Connector
Modules. Supplied with mounting
screws and adhesive backing.
Off White
Elec. Ivory
Light Gray
White
Black
LD3, CD3,
LD5, CD5
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
10
10
10
10
10
12 Module Space Multi-Media/Fiber Boxes
CBXF12IW-A
CBXF12EI-A
CBXF12IG-A
CBXF12WH-A
CBXF12BL-A
Surface mount box holds up to twelve
MINI-COM Connector Modules or
twelve OPTI-JACK Fiber Connector
Modules. Supplied with mounting
screws and adhesive backing.
Off White
Elec. Ivory
Light Gray
White
Black
LD3, CD3,
LD5, CD5,
LD10, CD10
SURFACE MOUNT BOXES
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
Fiber Box Expander
Fiber Outlet Kit
CBXF6KITIW
CBXF6KITEI
CBXF6KITIG
CBXF6KITWH
CBXF6KITBL
Includes bridge, deep cover and
tamper resistant screw.
Off White
Elec. Ivory
Light Gray
White
Black
LD3, CD3,
LD5, CD5
LD10, CD10
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• Upgrades CBXF6 to accept twelve
connector modules
Bridge snaps easily on to existing base.
B28
Capacity doubles to twelve ports.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-JACK ™ Category 5 Modular Jacks
Category 5
terminations are
a snap with the
MINI-JACK
Snap Tool!
Use it with all
MINI-JACK
Modular Jacks.
• Contacts plated with 50
microinches of gold
(0.013)
• Exceeds
requirements in
POWERSUM NEXT
TIA/EIA 568-A test
procedures
• Wiring scheme on cap
speeds installation and
reduces mis-wiring
• Clear, removable
termination cap provides
easy troubleshooting
• Patented termination style ensures twists
are maintained to within 1/2" (12.7).
Per Category 5 installation requirements)
• Module labels see
page Q23
• MINI-JACK
Modules are
available in 11
standard colors for
easy color
coding or to
complement any
decor
CATEGORY 5 MODULAR JACKS
Part
Number: CJT-X
(shown at left).
See page B30
• Provides U.L. Verified Category 5
performance (File No. E1298860)
• Can be re-terminated a minimum of
10 times
• Terminates 24 AWG solid
unshielded twisted pair to a
modular jack (For 22 AWG
applications, call Technical
Assistance - number shown below)
• IDC contact design eliminates need
to strip individual conductors
• Universal (accepts 2, 3 or 4 pair
modular plugs without damage)
• Orange jack base designates
Category 5
Part Number
Description
No. of
Module
Spaces
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Universal 8 Position, 8 Wire T568A and T568B Coded (RJ45 Type)
CJ588IW
CJ588EI
CJ588IG
CJ588WH
CJ588BL
CJ588OR
CJ588RD
CJ588BU
CJ588GR
CJ588YL
CJ588VL
CJ588
8 position, 8 wire universal modular
jack. Termination cap is color coded
for T568A and T568B wiring
schemes.
1
1
1
1
1
1
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
Orange
Red
Blue
Green
Yellow
Violet
1
1
1
1
1
1
1
1
1
1
1
50
50
50
50
50
50
50
50
50
50
50
1
1
1
1
1
1
1
1
1
1
1
50
50
50
50
50
50
50
50
50
50
50
Universal 8 Position, 8 Wire T568A Coded (RJ45 Type)
CJ588AIW
CJ588AEI
CJ588AIG
CJ588AWH
CJ588ABL
CJ588AOR
CJ588ARD
CJ588ABU
CJ588AGR
CJ588AYL
CJ588AVL
CJ588A
Note: Same modules snap in and out of all
MINI-COM Faceplates, Boxes and Modular
Patch Panels.
8 position, 8 wire universal modular
jack. Termination cap is color coded
for T568A wiring scheme.
1
1
1
1
1
1
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
Orange
Red
Blue
Green
Yellow
Violet
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B29
CATEGORY 5 MODULAR JACKS
New MINI-JACK Modular Jacks feature
state-of-the-art lead frame construction and
insulation displacement contacts to ensure the
highest quality, highest reliability connections
available. There is no printed circuit board with wave
soldered connections to create potential quality
problems. The U.L. verified Category 5 jacks are
designed to deliver the maximum performance in an
installed Category 5 channel. The patented design
ensures each jack is terminated per Category 5
installation guidelines, the first time and every time.
• Termination cap provides excellent strain
relief, helps control cable bend radius and
securely retains wires in place
B
MINI-JACK ™ Category 5 Modular Jacks
Part Number
No. of
Module
Spaces
Description
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Orange
Red
Blue
Green
Yellow
Violet
1
1
1
1
1
1
1
1
1
1
1
50
50
50
50
50
50
50
50
50
50
50
Universal 8 Position, 8 Wire T568B Coded (RJ45 Type)
CJ588BIW
CJ588BEI
CJ588BIG
CJ588BWH
CJ588BBL
CJ588BOR
CJ588BRD
CJ588BBU
CJ588BGR
CJ588BYL
CJ588BVL
CJ588B
8 position, 8 wire universal modular
jack. Termination cap is color coded for
T568B wiring scheme.
1
1
1
1
1
1
1
1
1
1
1
Universal 8 Position, 8 Wire Keyed T568A and T568B Coded (RJ45 Type)
CJ588KIW
CJ588KEI
CJ588KIG
CJ588KWH
CJ588KBL
CJ588KOR
CJ588KRD
CJ588KBU
CJ588KGR
CJ588KYL
CJ588KVL
CJ588K
8 position, 8 wire universal modular
jack, keyed for data. Termination cap
is color coded for T568A and T568B
wiring schemes.
1
1
1
1
1
1
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
Orange
Red
Blue
Green
Yellow
Violet
1
1
1
1
1
1
1
1
1
1
1
50
50
50
50
50
50
50
50
50
50
50
1
1
1
1
1
1
1
1
1
1
1
50
50
50
50
50
50
50
50
50
50
50
1
1
1
1
1
1
1
1
1
1
1
50
50
50
50
50
50
50
50
50
50
50
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
10
50
Universal 8 Position, 8 Wire Keyed T568A Coded (RJ45 Type)
CJ588KAIW
CJ588KAEI
CJ588KAIG
CJ588KAWH
CJ588KABL
CJ588KAOR
CJ588KARD
CJ588KABU
CJ588KAGR
CJ588KAYL
CJ588KAVL
CATEGORY 5 MODULAR JACKS
CJ588KA
8 position, 8 wire universal modular
jack keyed for data. Termination cap is
color coded for T568A wiring scheme.
1
1
1
1
1
1
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
Orange
Red
Blue
Green
Yellow
Violet
Universal 8 Position, 8 Wire Keyed T568B Coded (RJ45 Type)
CJ588KB
Note: Same modules snap in and out of all
MINI-COM Faceplates, Boxes and
Modular Patch Panels.
CJ588KBIW
CJ588KBEI
CJ588KBIG
CJ588KBWH
CJ588KBBL
CJ588KBOR
CJ588KBRD
CJ588KBBU
CJ588KBGR
CJ588KBYL
CJ588KBVL
8 position, 8 wire universal modular
jack keyed for data. Termination cap is
color coded for T568B wiring scheme.
1
1
1
1
1
1
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
Orange
Red
Blue
Green
Yellow
Violet
Snap Tool
Part Number
Description
Termination “Snap Tool”
CJT-X
• Facilitates easiest installation
• Eliminates need for slip lock pliers
• Insures conductors are fully
terminated
B30
Terminates all MINI-JACK and PAN-JACK ™
Category 5 and Category 3 Modular Jacks.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-JACK ™ Category 5 Modular Jack with Micro-Cap
These U.L. verified Category 5 Jacks are
designed to deliver the maximum performance
in an installed Category 5 channel. The
patented design ensures each jack is
terminated per Category 5 installation
guidelines, the first time, every time.
CATEGORY 5 MODULAR JACKS
NEW MINI-JACK Category 5 Jack features
the same state-of-the-art lead frame
construction and ease of termination as our
MINI-JACK Category 5 Jacks, but with a cap
designed to accommodate unique size (i.e.
crescent shaped) cable. It also easily installs
into very shallow installation spaces because
the cable can exit the jack at a right angle.
Right angle exit in shallow installation
spaces
MODULAR JACKS WITH MICRO-CAP
Accommodates large
and\or unique O.D. Cable
Category 5
terminations are
a snap with the
MINI-JACK
Snap Tool!
Use it with all
MINI-JACK
Modular Jacks.
Part
Number: CJT-X
(shown at left).
See page B30.
• Provides U.L. Verified Category 5
performance (File No. E1298860)
• Can be re-terminated a minimum of
10 times
• Terminates 24 AWG solid
unshielded twisted pair to a
modular jack
• IDC contact design eliminates need
to strip individual conductors
• Universal (accepts 2, 3 or 4 pair
modular plugs without damage)
• Orange jack base designates
Category 5
Part Number
Description
No. of
Module
Spaces
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Off White
Elec. Ivory
Light Gray
White
Black
Orange
Red
Blue
Green
Yellow
Violet
1
1
1
1
1
1
1
1
1
1
1
50
50
50
50
50
50
50
50
50
50
50
1
1
1
1
1
1
1
1
1
1
1
50
50
50
50
50
50
50
50
50
50
50
Universal 8 Position, 8 Wire T568A Coded (RJ45 Type)
CJ588SAIW
CJ588SAEI
CJ588SAIG
CJ588SAWH
CJ588SABL
CJ588SAOR
CJ588SARD
CJ588SABU
CJ588SAGR
CJ588SAYL
CJ588SAVL
8 position, 8 wire universal modular
jack. Termination cap is color coded
for T568A wiring schemes.
Cap designed for large and/or unique
shaped cables and for shallow
installation spaces.
1
1
1
1
1
1
1
1
1
1
1
Universal 8 Position, 8 Wire T568B Coded (RJ45 Type)
CJ588SBIW
CJ588SBEI
CJ588SBIG
CJ588SBWH
CJ588SBBL
CJ588SBOR
CJ588SBRD
CJ588SBBU
CJ588SBGR
CJ588SBYL
CJ588SBVL
8 position, 8 wire universal modular
jack. Termination cap is color coded
for T568B wiring schemes.
Cap designed for large and/or unique
shaped cables and for shallow
installation spaces.
1
1
1
1
1
1
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
Orange
Red
Blue
Green
Yellow
Violet
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B31
B
MINI-JACK ™ Category 5 Shielded Modular Jacks
MINI-JACK Category 5 Shielded
Modular Jacks terminate 100 Ohm
screened twisted pair and shielded twisted
pair communication system from the
harmful effects of Electromagnetic
Interference (EMI). Disruptive levels of EMI,
which are caused by radiation of electrical
or magnetic fields, are commonly present
around power cables, heavy machinery, etc.
• Patented design ensures twists are
maintained to within 1/2"(12.7) as
required per TIA Category 5 installation
guidelines
• Jack shield is crimped to
cable shield to provide
bonding (crimp ring included)
• Screened
Category
5 Cable
(ScTP)
• Contacts plated with
50 microinches of gold
(0.013)
MINI-JACK
Category 5
Modular Jack
• IDC contacts for quick,
easy termination
Shielded cable:
Screened cable:
Shield
Body
• Metallic shield provides
EMI protection
Each individual twisted pair is encased by a metallic layer (foil or braid).
All twisted pairs are encased together by a metallic layer (foil or braid).
For 24 or 22 AWG ScTP, STP*
Part Number
Description
No. of
Module
Spaces
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Universal 8 Position, 8 Wire T568A and T568B Coded (RJ45 Type)
CATEGORY 5 MODULAR JACKS
CJS588
CJS588
CJS588A
1
50
8 position, 8 wire universal modular jack, shield and
crimp ring. Termination cap is color coded for T568A
wiring scheme.
1
1
50
1
1
50
1
1
50
1
1
50
1
1
50
50
—
Universal 8 Position, 8 Wire T568B Coded (RJ45 Type)
CJS588B
For 22 AWG ScTP, STP*
8 position, 8 wire universal modular jack, shield and
crimp ring. Termination cap is color coded for T568B
wiring scheme.
Universal 8 Position, 8 Wire T568A and T568B Coded (RJ45 Type)
CJS58822
CJS58822
8 position, 8 wire universal modular jack, shield and
crimp ring. Termination cap is color coded for T568A
and T568B wiring schemes.
Universal 8 Position, 8 Wire T568A Coded (RJ45 Type)
CJS58822A
• Terminates 22 AWG solid 100 Ohm
screened twisted pair and shielded
twisted pair. Max. insulated conductor
O.D. is .060" (1.52)
• Max. cable O.D. .4" (10.1)
8 position, 8 wire universal modular jack, shield and
crimp ring. Termination cap is color coded for T568A
wiring scheme.
Universal 8 Position, 8 Wire T568B Coded (RJ45 Type)
CJS58822B
Note: Same modules snap in and out of all
MINI-COM Faceplates, Boxes and
Modular Patch Panels.
B32
1
Universal 8 Position, 8 Wire T568A Coded (RJ45 Type)
• Terminates 24 or 22 AWG solid 100
Ohm screened twisted pair and
shielded twisted pair (consult factory for
22 AWG). Max. insulated conductor
O.D. is .048" (1.22)
• Max. cable O.D. .34" (8.64)
• Complies with EN 55022 radiated
emissions limit. (European conducted
and radiated emissions standard)
*Refer to Max. conductor and cable O.D.
requirements.
8 position, 8 wire universal modular jack, shield and
crimp ring. Termination cap is color coded for T568A
and T568B wiring schemes.
8 position, 8 wire universal modular jack, shield and
crimp ring. Termination cap is color coded for T568B
wiring scheme.
Optional Insulating Label - For Shielded Modular Jacks
CJSGL-L
Insulates adjacent jacks from each other when applied to
alternate jacks. Allows isolated ground on each jack.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
Note: The B33BT1 crimp tool with the B33DS2 die set are recommended to crimp the shield ring on all
MINI-JACK Shielded Modular Jacks. (see page C6).
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-JACK ™ Category 3 Modular Jacks
CJ88
• MINI-JACK Category 3 Modular Jacks are available in 5 standard colors
for easy color coding or to complement any interior decor.
Part Number
Description
No. of
Module
Spaces
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Universal 8 Position, 8 Wire T568A and T568B Coded (RJ45 Type)
CJ88IW
CJ88EI
CJ88IG
CJ88WH
CJ88BL
8 position, 8 wire universal modular
jack. Termination cap is color coded
for T568A and T568B wiring
schemes.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
50
50
50
50
50
1
1
1
1
1
50
50
50
50
50
1
1
1
1
1
50
50
50
50
50
Universal 8 Position, 8 Wire T568A Coded (RJ45 Type)
CJ88AIW
CJ88AEI
CJ88AIG
CJ88AWH
CJ88ABL
CJ88A
8 position, 8 wire universal modular
jack. Termination cap is color coded
for T568A wiring scheme.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
Universal 8 Position, 8 Wire T568B Coded (RJ45 Type)
CJ88BIW
CJ88BEI
CJ88BIG
CJ88BWH
CJ88BBL
CJ88B
8 position, 8 wire universal modular
jack. Termination cap is color coded
for T568B wiring scheme.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
Universal 8 Position, 8 Wire Keyed T568A and T568B Coded (RJ45 Type)
CJ88KIW
CJ88KEI
CJ88KIG
CJ88KWH
CJ88KBL
CJ88K
8 position, 8 wire universal modular
jack. Termination cap is color coded
for T568A and T568B wiring
schemes.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
50
50
50
50
50
1
1
1
1
1
50
50
50
50
50
1
1
1
1
1
50
50
50
50
50
Universal 8 Position, 8 Wire Keyed T568A Coded (RJ45 Type)
CJ88KAIW
CJ88KAEI
CJ88KAIG
CJ88KAWH
CJ88KABL
CJ88KA
8 position, 8 wire universal modular
jack, keyed for data. Termination cap
is color coded for T568A wiring
scheme.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
Universal 8 Position, 8 Wire Keyed T568B Coded (RJ45 Type)
CJ88KBIW
CJ88KBEI
CJ88KBIG
CJ88KBWH
CJ88KBBL
CJ88KB
Note: Same modules snap in and out of all
MINI-COM Faceplates, Boxes and
Modular Patch Panels.
8 position, 8 wire universal modular
jack, keyed for data. Termination cap
is color coded for T568B wiring
scheme.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B33
CATEGORY 3 MODULAR JACKS
• Provides Category 3 performance
• Can be re-terminated a minimum of 10
times
• Terminates 24 AWG solid unshielded
twisted pair to a modular jack (For 22
AWG applications, call Technical
Assistance - number shown below)
• IDC contact design eliminates need to
strip individual conductors
• White jack base designates Category 3
B
MINI-JACK ™ Modular Jacks
CJ88U
Part Number
Description
No. of
Module
Spaces
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
50
50
50
50
50
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
50
50
50
50
50
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
50
50
50
50
50
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
50
50
50
50
50
Clear
100
1000
8 Position, 8 Wire USOC Coded (RJ45 Type)
CJ88UIW
CJ88UEI
CJ88UIG
CJ88UWH
CJ88UBL
8 position, 8 wire modular jack.
Termination cap is color coded for
USOC wiring scheme.
CJ66U
6 Position, 6 Wire USOC Coded (RJ11 Type)
CJ66UIW
CJ66UEI
CJ66UIG
CJ66UWH
CJ66UBL
6 position, 6 wire modular jack.
Termination cap is color coded for
USOC wiring scheme.
CJ66
6 Position, 6 Wire (RJ11 Type)
CJ66IW
CJ66EI
CJ66IG
CJ66WH
CJ66BL
6 position, 6 wire modular jack.
CJ64
6 Position, 4 Wire (RJ11 Type)
CATEGORY 3 MODULAR JACKS
Note: Same modules snap in and out of all
MINI-COM Faceplates, Boxes and
Modular Patch Panels.
Dust Cover
CJ64IW
CJ64EI
CJ64IG
CJ64WH
CJ64BL
Dust Covers for MINI-JACK Modular Jacks
MDC-C
2.
Straighten conductors,
insert into cap and bend
down to retain.
Complete the
termination with
CJT Termination
Tool...
Dust cover snaps directly into front housing of
all MINI-JACK Modular Jacks. Clear
polycarbonate material can be used with all
colors of modular jacks.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• Keeps jack contacts clean when not in use.
1.
6 position, 4 wire modular jack.
MINI-JACK ™ Termination Methods
3.
Pull conductors until outer jacket is
inside cap and bend conductors up.
Trim conductors flush
with cap.
5A.
Or complete the
termination with
slip lock pliers.
CJT Tool terminates jack
with a “click”.
B34
4.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
Push cap firmly onto
housing.
5B.
Squeeze pliers until cap
“clicks”.
B
MINI-COM ® Modules
• MINI-COM Modules
are available in 5
standard colors for
easy color coding or to
complement any
decor.
MINI-COM Modules snap in and out of all
MINI-COM Faceplates, Boxes and Modular
Patch Panels for fast moves, adds and
changes. Consult factory for nonstandard
modules.
SC Duplex Fiber Optic
Adapter Module
Part Number
Description
No. of
Module
Spaces
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
2
2
2
2
2
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
MINI-COM SC Duplex Fiber Optic Adapter Module
CMDSC
CMDSCIW
CMDSCEI
CMDSCIG
CMDSCWH
CMDSCBL
ST Fiber Optic Adapter
Module
Module supplied with one SC
multimode/single mode duplex
fiber optic adapter with phosphor
bronze sleeve.
MINI-COM ST Fiber Optic Adapter Module
CMSTIW
CMSTEI
CMSTIG
CMSTWH
CMSTBL
CMST
Module supplied with one ST
multimode/single mode fiber optic
adapter with phosphor bronze sleeve.
BNC Coax Coupler Module MINI-COM 50 Ohm BNC Coax Coupler Module
CMBAIW
CMBAEI
CMBAIG
CMBAWH
CMBABL
CMBA
Module supplied with industry
standard 50 Ohm BNC bulkhead
coupler.
NOTE: Accepts BNC Plugs found on page C6 to page C7.
MINI-COM F-Type Coupler Module
F-Type Coupler Module
CMFBAIW
CMFBAEI
CMFBAIG
CMFBAWH
CMFBABL
CMFBA
Module supplied with industry
standard F-Type bulkhead coupler.
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
Note: Same modules snap in and out of all
MINI-COM Faceplates, Boxes and
Modular Patch Panels.
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B35
B
MINI-COM ® Modules
RCA Connector Module
CMRCA
Part Number
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
1
1
1
1
1
10
10
10
10
10
MINI-COM RCA Connector Module — Black
CMRCAIW
CMRCAEI
CMRCAIG
CMRCAWH
CMRCABL
CMRCAR
Description
No. of
Module
Spaces
Module supplied with one RCA
connector with black inser t. Solder
type termination.
MINI-COM RCA Connector Module — Red
CMRCARIW
CMRCAREI
CMRCARIG
CMRCARWH
CMRCARBL
Module supplied with one RCA
connector with red insert. Solder type
termination.
CMRCAR available 2nd quarter, ‘98
CMRCAY
MINI-COM RCA Connector Module — Yellow
CMRCAYIW
CMRCAYEI
CMRCAYIG
CMRCAYWH
CMRCAYBL
Module supplied with one RCA
connector with yellow insert. Solder
type termination.
CMRCAY available 2nd quarter, ‘98
MODULES
MINI-COM RCA Connector Module — White
CMRCAW
CMRCAWIW
CMRCAWEI
CMRCAWIG
CMRCAWWH
CMRCAWBL
Module supplied with one RCA
connector with white insert. Solder
type termination.
CMRCAW available 2nd quarter, ‘98
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
B36
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B
MINI-COM ® Modules
Blank Module
CMB
Part
Number
Std.
Ctn.
Qty.
Module reserves space for future use.
Off White
Elec. Ivory
Light Gray
White
Black
10
10
10
10
10
50
50
50
50
50
10
10
10
10
10
50
50
50
50
50
1
1
1
1
1
10
10
10
10
10
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
MODULES
MINI-MOD ™ Adapter
1
1
1
1
1
Color
Std.
Pkg.
Qty.
MINI-COM Blank Module
CMBIW-X
CMBEI-X
CMBIG-X
CMBWH-X
CMBBL-X
Note: Same modules snap in and out of
all MINI-COM Faceplates, Boxes and
Modular Patch Panels.
Description
No. of
Module
Spaces
MINI-MOD Adapter
CMMA
CMMAIW-X
CMMAEI-X
CMMAIG-X
CMMAWH-X
CMMABL-X
MINI-COM Modules snap directly
into MINI-MOD Adapter.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
• Allows all MINI-COM modules to be used
in MOD-COM ™ Faceplates, Boxes and
Modular Patch Panels. (MOD-COM
System replaced by more compact
MINI-COM System).
SVHS Coupler Module Insert
1/3 Size SVHS Coupler Module Insert
CHSVHSCIW
CHSVHSCEI
CHSVHSCIG
CHSVHSCWH
CHSVHSCBL
Module insert supplied with one
SVHS coupler. Accommodates 1/3 of
a single gang bezel.
1
1
1
1
1
Off White
Elec. Ivory
Light Gray
White
Black
ORDERING INFORMATION:
Order number of pieces required, in multiples of Standard Package Quantity.
For use with MINI-COM Bezels
only. Not for use with faceplates or
surface mount boxes.
CHSVHSC available 3rd quarter, ‘98
For Technical Assistance, call: 888-506-5400, Ext. 6914
(outside the U.S., see inside back cover for International Directory)
B37
工商网监
湘ICP备2023018690号
