CJ588BUY

Mini-Com ® Mini-Jack ™ TX5e ™ UTP Jack Module SPECIFICATION SHEET specifications Category 5e/Class D, 8-position, UTP jack module shall terminate solid, 4-pair, 24 – 22 AWG, 100 ohm unshielded twisted pair cable and shall not require use of a punchdown tool. UTP jack modules shall use a downward forward motion termination method to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. The module base sled shall be color-coded orange to designate Category 5e performance and shall include a universal label coded for T568A and T568B wiring schemes. TX5500 ™ UTP Copper Cabling System Mini-Com ® TX5e™ UTP Jack Module Jack module: technical information Category 5e/Class D channel and component performance: FCC and ANSI compliance: PoE compliance: IEC compliance: RoHS compliance: UL rated: Conductor termination range: CJ588IWY* TX5500 ™ UTP Copper Cable Exceeds channel requirements of ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards at swept frequencies 1 to 100 MHz Exceeds component requirements of ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards at swept frequencies 1 to 100 MHz Meets all applicable ANSI/TIA-968-A requirements; contacts plated with 50 microinches of gold for superior performance Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications Meets IEC 60603-7 Compliant UL 1863 approved Wire cap compatible with 24 – 22 AWG solid cable with conductor insulation diameters of 0.035 in. to 0.048 in. and overall cable O.D. 0200 in. to 0.250 in. Plenum: Riser: LSZH: CM: PUP5504*** PUR5504*** PUL5504*** PUC5504*** TX5e™ UTP Patch Cords CM (foot lengths): UTPCH^Y CM (meter lengths): UTPCH^^MY LSZH UTPCHL^^MY (meter lengths): Mini-Com ® Angled Modular Patch Panels 24-port, 1 RU: 48-port, 2 RU: CPPLA24WBLY CPPLA48WBLY Mini-Com ® Flat Modular Patch Panels 24-port, 1 RU: 48-port, 2 RU: CPPL24WBLY CPPL48WBLY For additional modular and punchdown patch panels, visit www.panduit.com. Tools and Accessories key features and benefits Clear termination cap Modular True strain relief RJ45 interface Identification Termination tools (optional) Block out device (optional) Enables easy troubleshooting and eases conductor alignment during termination UTP jack modules snap in and out of all Mini-Com® Faceplates, Modular Patch Panels and Surface Mount Boxes for easy moves, adds and changes Controls cable bend radius for long term installed performance Industry standard interface provides a quick and easy plug and play connection to RJ45 patch cords; backwards compatible Can be clearly identified with optional labels and icons for port identification CJT-X termination tool ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability Provides a simple and secure method to control access to data ports while not in use applications Mini-Com® TX5e™ UTP Jack Modules are a component of the TX5500™ UTP Copper Cabling System. This end-to-end system provides Gigabit Ethernet performance with usable bandwidth beyond 100 MHz. With certified performance to the ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D Edition 2.1 standards, this system will support the following applications: w w w. p a n d u i t . c o m • Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet) • 155 Mb/s ATM, 622 Mb/s ATM • Token ring 4/16 • Voice/data systems • Voice over Internet Protocol (VoIP) Jack module termination tool: Wire snipping tool: Wire snipping tool: Clear dust cap: Block out device: Phone icons: Data icons: CJT-X CWST CJAST MDC-C PSL-DCJB-^^^ CIPIW-C+ CIDIW-C+ *To designate color other than IW (Off White), replace IW suffix with EI (Electric Ivory), IG (International Gray), WH (White), AW (Arctic White), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange), or VL (Violet). **To designate color, add suffix BU (Blue) or WH (White). For additional cable colors, contact customer service. ^For lengths 1 to 20 feet (one foot increments) and 25, 30, 35, 40 feet, change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) or VL (Violet). For example, the part number for a blue 15-foot patch cord is UTPSP15BUY. ^^For lengths 1 to 10 meters (one meter increments) and 0.5, 1.5, 2.5, 15, 20, meters, change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) or VL (Violet). For example, the part number for a blue 15-meter patch cord is UTPSP15MBUY. ^^^To designate color other than Red, add suffix BL (Black), BU (Blue), YL (Yellow), GR (Green), OR (Orange), IW (Off White) or IG (International Gray) at end of the part number. 10/package. +To designate color other than IW (Off White), replace IW with EI (Electric Ivory), IG (International Gray), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) or VL (Violet) in the part number. 100/package. Contact customer service for bulk packaged jack modules and patch cords. Mini-Com ® Mini-Jack ™ TX5e ™ UTP Jack Module Te s t R e s u l t s Performance Test 100 MHz Typical Test Results (dB) Test Method NEXT FEXT Attenuation Return Loss > 43 Additional Transmission Performance Specifications for 4-pair 100Ohm Category 5e Cabling, ANSI/TIA-568-C.2 > 35 < .40 > 20 Consult factory for cable brand specific channel test results Mechanical Test Test Method Measurement Typical Test Results — IEC 512-6d IEC 512-9a Load (grams) Circuit Resistance Change (mOhms) Circuit Resistance Change (mOhms > 1 00 < 40 < 40 IEC 512-13b Mating Force (N) Unmating Force (N) < 20 < 20 Test Method Measurement Typical Test Results IEC 512-2a IEC 512-4a Resistance (mOhms) 1000VAC, 1 minute < 40 Passed IEC 512-3a Resistance (MOhms) > 1000 Environmental Test Test Method Measurement Typical Test Results Temperature Life Humidity Thermal Shock Climatic Sequence Flowing Mixed Gas Corrosion IEC 512-9b IEC 512-11c Circuit Resistance Change (mOhms) Circuit Resistance Change (mOhms) < 40 < 40 IEC 512-11d Circuit Resistance Change (mOhms) < 40 IEC 512-11a IEC 512-11g Circuit Resistance Change (mOhms) Circuit Resistance Change (mOhms) < 40 < 40 Normal Force Vibration Durability Mating/Unmating Electrical Test Low Level Circuit Resistance Dielectric Withstand Voltage Insulation Resistance Termination Cap .72 [18.3] 1.37 [34.8] .62 [15.9] Module Housing Dimensions are in inches. [Dimensions in brackets are metric]. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 and reference COSP179 ©2010 Panduit Corp. ALL RIGHTS RESERVED. WW-COSP179 11/2010