Mini-Com ® Mini-Jack ™ TX5e ™ UTP Jack Module
SPECIFICATION SHEET
specifications
Category 5e/Class D, 8-position, UTP jack module shall
terminate solid, 4-pair, 24 – 22 AWG, 100 ohm unshielded
twisted pair cable and shall not require use of a punchdown
tool. UTP jack modules shall use a downward forward motion
termination method to optimize performance by maintaining
cable pair geometry while eliminating conductor untwist. The
module base sled shall be color-coded orange to designate
Category 5e performance and shall include a universal label
coded for T568A and T568B wiring schemes.
TX5500 ™ UTP Copper
Cabling System
Mini-Com ® TX5e™
UTP Jack Module
Jack module:
technical information
Category 5e/Class D channel
and component performance:
FCC and ANSI compliance:
PoE compliance:
IEC compliance:
RoHS compliance:
UL rated:
Conductor termination range:
CJ588IWY*
TX5500 ™ UTP Copper Cable
Exceeds channel requirements of ANSI/TIA-568-C.2 Category 5e
and ISO 11801 Class D standards at swept frequencies
1 to 100 MHz
Exceeds component requirements of ANSI/TIA-568-C.2 Category
5e and ISO 11801 Class D standards at swept frequencies
1 to 100 MHz
Meets all applicable ANSI/TIA-968-A requirements; contacts plated
with 50 microinches of gold for superior performance
Meets requirements of IEEE 802.3af and IEEE 802.3at for
PoE applications
Meets IEC 60603-7
Compliant
UL 1863 approved
Wire cap compatible with 24 – 22 AWG solid cable with conductor
insulation diameters of 0.035 in. to 0.048 in. and overall cable O.D.
0200 in. to 0.250 in.
Plenum:
Riser:
LSZH:
CM:
PUP5504***
PUR5504***
PUL5504***
PUC5504***
TX5e™ UTP Patch Cords
CM (foot lengths):
UTPCH^Y
CM (meter lengths): UTPCH^^MY
LSZH
UTPCHL^^MY
(meter lengths):
Mini-Com ® Angled
Modular Patch Panels
24-port, 1 RU:
48-port, 2 RU:
CPPLA24WBLY
CPPLA48WBLY
Mini-Com ® Flat Modular
Patch Panels
24-port, 1 RU:
48-port, 2 RU:
CPPL24WBLY
CPPL48WBLY
For additional modular and punchdown patch
panels, visit www.panduit.com.
Tools and Accessories
key features and benefits
Clear termination cap
Modular
True strain relief
RJ45 interface
Identification
Termination tools (optional)
Block out device (optional)
Enables easy troubleshooting and eases conductor alignment
during termination
UTP jack modules snap in and out of all Mini-Com® Faceplates,
Modular Patch Panels and Surface Mount Boxes for easy moves,
adds and changes
Controls cable bend radius for long term installed performance
Industry standard interface provides a quick and easy plug and
play connection to RJ45 patch cords; backwards compatible
Can be clearly identified with optional labels and icons for
port identification
CJT-X termination tool ensures conductors are fully terminated
by utilizing a smooth forward motion without impact on critical
internal components for maximum reliability
Provides a simple and secure method to control access to data
ports while not in use
applications
Mini-Com® TX5e™ UTP Jack Modules are a
component of the TX5500™ UTP Copper Cabling
System. This end-to-end system provides Gigabit
Ethernet performance with usable bandwidth beyond
100 MHz. With certified performance to the
ANSI/TIA-568-C.2 Category 5e and ISO 11801
Class D Edition 2.1 standards, this system will
support the following applications:
w w w. p a n d u i t . c o m
• Ethernet 10BASE-T, 100BASE-T (Fast
Ethernet), 1000BASE-T (Gigabit Ethernet)
• 155 Mb/s ATM, 622 Mb/s ATM
• Token ring 4/16
• Voice/data systems
• Voice over Internet Protocol (VoIP)
Jack module
termination tool:
Wire snipping tool:
Wire snipping tool:
Clear dust cap:
Block out device:
Phone icons:
Data icons:
CJT-X
CWST
CJAST
MDC-C
PSL-DCJB-^^^
CIPIW-C+
CIDIW-C+
*To designate color other than IW (Off White),
replace IW suffix with EI (Electric Ivory),
IG (International Gray), WH (White),
AW (Arctic White), BL (Black), BU (Blue),
RD (Red), YL (Yellow), GR (Green),
OR (Orange), or VL (Violet).
**To designate color, add suffix BU (Blue)
or WH (White). For additional cable colors,
contact customer service.
^For lengths 1 to 20 feet (one foot increments)
and 25, 30, 35, 40 feet, change the length
designation in the part number to the desired
length. For standard cable colors other than
Off White, add suffix BL (Black), BU (Blue), RD
(Red), YL (Yellow), GR (Green), OR (Orange)
or VL (Violet). For example, the part number
for a blue 15-foot patch cord is UTPSP15BUY.
^^For lengths 1 to 10 meters (one meter
increments) and 0.5, 1.5, 2.5, 15, 20, meters,
change the length designation in the part
number to the desired length. For standard
cable colors other than Off White, add suffix
BL (Black), BU (Blue), RD (Red), YL (Yellow),
GR (Green), OR (Orange) or VL (Violet). For
example, the part number for a blue 15-meter
patch cord is UTPSP15MBUY.
^^^To designate color other than Red, add
suffix BL (Black), BU (Blue), YL (Yellow), GR
(Green), OR (Orange), IW (Off White) or IG
(International Gray) at end of the part number.
10/package.
+To designate color other than IW (Off White),
replace IW with EI (Electric Ivory), IG
(International Gray), BL (Black), BU (Blue), RD
(Red), YL (Yellow), GR (Green), OR (Orange)
or VL (Violet) in the part number. 100/package.
Contact customer service for bulk packaged
jack modules and patch cords.
Mini-Com ® Mini-Jack ™ TX5e ™ UTP Jack Module
Te s t R e s u l t s
Performance Test
100 MHz
Typical Test Results (dB)
Test Method
NEXT
FEXT
Attenuation
Return Loss
> 43
Additional Transmission
Performance Specifications
for 4-pair 100Ohm
Category 5e Cabling,
ANSI/TIA-568-C.2
> 35
< .40
> 20
Consult factory for cable brand specific channel test results
Mechanical Test
Test Method
Measurement
Typical Test Results
—
IEC 512-6d
IEC 512-9a
Load (grams)
Circuit Resistance Change (mOhms)
Circuit Resistance Change (mOhms
> 1 00
< 40
< 40
IEC 512-13b
Mating Force (N)
Unmating Force (N)
< 20
< 20
Test Method
Measurement
Typical Test Results
IEC 512-2a
IEC 512-4a
Resistance (mOhms)
1000VAC, 1 minute
< 40
Passed
IEC 512-3a
Resistance (MOhms)
> 1000
Environmental Test
Test Method
Measurement
Typical Test Results
Temperature Life
Humidity
Thermal Shock
Climatic Sequence
Flowing Mixed Gas Corrosion
IEC 512-9b
IEC 512-11c
Circuit Resistance Change (mOhms)
Circuit Resistance Change (mOhms)
< 40
< 40
IEC 512-11d
Circuit Resistance Change (mOhms)
< 40
IEC 512-11a
IEC 512-11g
Circuit Resistance Change (mOhms)
Circuit Resistance Change (mOhms)
< 40
< 40
Normal Force
Vibration
Durability
Mating/Unmating
Electrical Test
Low Level Circuit Resistance
Dielectric Withstand Voltage
Insulation Resistance
Termination Cap
.72
[18.3]
1.37
[34.8]
.62
[15.9]
Module Housing
Dimensions are in inches. [Dimensions in brackets are metric].
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800.777.3300 and reference COSP179
©2010 Panduit Corp.
ALL RIGHTS RESERVED.
WW-COSP179
11/2010