CJ5E88TBL

Mini-Com® TX5e™ UTP Jack Module S P E C I F I C AT I O N S H E E T specifications TX5500 ™ UTP Copper Cabling System Category 5e/Class D, 8-position, UTP jack module shall terminate solid, 4-pair, 24 – 22 AWG, 100 ohm unshielded twisted pair cable and shall not require use of a punchdown tool. UTP jack modules shall use a forward motion termination method to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. The termination cap shall be color-coded red to designate Category 5e performance and shall include a universal label coded for T568A and T568B wiring schemes. Mini-Com ® TX5e™ UTP Jack Module Jack Module: CJ5E88TIW* technical information Category 5e/Class D Exceeds channel requirements of ANSI/TIA-568-C.2 Category 5e channel and component and ISO 11801 Class D standards at swept frequencies performance: 1 to 100 MHz Exceeds component requirements of ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards at swept frequencies 1 to 100 MHz FCC and ANSI Meets ANSI/TIA-1096-A; contacts plated with 50 microinches of compliance: gold for superior performance PoE compliance: Rated for 2500 cycles with IEEE 802.3af / 802.3at and proposed 802.3bt type 3 and type 4 IEC compliance: Meets IEC 60603-7 RoHS compliance: Compliant UL rated: UL 1863 approved Conductor termination: Wire cap compatible with 24 – 22 AWG solid cable with conductor range: insulation diameters of 0.035 in. to 0.048 in. and overall cable O.D. 0200 in. to 0.250 in. key features and benefits 100% performance tested Utilizes enhanced Giga-TX ™ Technology Improved termination cap Modular True strain relief Individually serialized RJ45 interface Identification Termination tools (optional) Block out device (optional) Confidence that each jack module will deliver the critical electrical performance requirements Optimizes performance by eliminating conductor untwist and reduces installation time and expense Conductor retention slots simplify jack module termination UTP jack modules snap in and out of all Mini-Com® Faceplates, Modular Patch Panels and Surface Mount Boxes for easy moves, adds and changes Controls cable bend radius for long term installed performance Marked with quality control number for future traceability Industry standard interface provides a quick and easy plug and play connection to RJ45 patch cords; backwards compatible Can be clearly identified with optional labels and icons for port identification CGJT termination tool ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability Provides a simple and secure method to control access to data ports while not in use applications Mini-Com® TX5e™ UTP Jack Modules are a component of the TX5500™ UTP Copper Cabling System. This end-to-end system provides Gigabit Ethernet performance with usable bandwidth beyond 100 MHz. With certified performance to the ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards, this system will support w w w. p a n d u it.c o m the following applications: • Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet) • 155 Mb/s ATM, 622 Mb/s ATM • Token ring 4/16 • Voice/data systems • Voice over Internet Protocol (VoIP) TX5500™ UTP Copper Cable Plenum: Riser: LSZH (60332-1): LSZH (60332-3): CM: PUP5504*** PUR5504*** PUL5504*** PUZ5504** PUC5504*** TX5e™ UTP Patch Cords CM (foot lengths): UTPCH^Y CM (meter lengths): UTPCH^^MY LSZH (meter lengths): UTPCHL^^MY Mini-Com ® Angled Modular Patch Panels 24-port, 1 RU: 48-port, 2 RU: CPPLA24WBLY CPPLA48WBLY Mini-Com ® Flat Modular Patch Panels 24-port, 1 RU: 48-port, 2 RU: CPPL24WBLY CPPL48WBLY For additional modular and punchdown patch panels, visit www.panduit.com. Tools and Accessories Jack module termination tool: CGJT Wire snipping tool: CWST Wire stripping tool: CJAST Clear dust cap: MDC-C Blockout device: PSL-DCJB-^^^ Phone icons: CIPIW-C+ Data icons: CIDIW-C+ *To designate color other than IW (Off White), replace IW suffix with EI (Electric Ivory), IG (International Gray), WH (White), AW (Arctic White), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange), VL (Violet), BR (Brown), GD (Gold), LB (Light Blue) or PK (Pink). **To designate color, add suffix BU (Blue) or WH (White). For additional cable colors, contact customer service. ^For lengths 1 to 20 feet (one foot increments) and 25, 30, 35, 40 feet, change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) or VL (Violet). For example, the part number for a blue 15-foot patch cord is UTPSP15BUY. ^^For lengths 1 to 10 meters (one meter increments) and 0.5, 1.5, 2.5, 15, 20, meters, change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) or VL (Violet). For example, the part number for a blue 15-meter patch cord is UTPSP15MBUY. ^^^To designate color other than Red, add suffix BL (Black), BU (Blue), YL (Yellow), GR (Green), OR (Orange), IW (Off White) or IG (International Gray) at end of the part number. 10/package. +To designate color other than IW (Off White), replace IW with EI (Electric Ivory), IG (International Gray), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) or VL (Violet) in the part number. 100/package. Contact customer service for bulk packaged jack modules and patch cords. Mini-Com® TX5e™ UTP Jack Module Te s t R e s u l t s Test Method 20 MHz Typical Test Results 100 MHz Typical Test Results NEXT Additional Transmission > 57 > 43 FEXT Performance Specifications > 49 > 35.1 Attenuation for 4-pair ohm Category 5e < 0.18 < 0.40 Return Loss Cabling, ANSI/TIA-568-C.2 > 24 > 20 Measurement Typical Performance Performance Test Consult technical support for cable brand specific channel test results. Mechanical Test Test Method Normal Force — Load (grams) > 100 Vibration IEC 512-6d Circuit Resistance Change (mOhms) < 40 Durability IEC 512-9a Circuit Resistance Change (mOhms) < 40 Mating/Unmating IEC 512-13b Mating Force (N) < 20 Unmating Force (N) < 20 Mechanical Test Test Method Measurement Typical Performance Low Level Circuit Resistance IEC 512-2a Resistance (mOhms) < 40 Dielectric Withstand Voltage IEC 512-4a 1000VAC, 1 minute Passed Insulation Resistance IEC 512-3a Resistance (MOhms) > 1000 Test Method Measurement Typical Performance Temperature Life Mechanical Test IEC 512-9b Circuit Resistance Change (mOhms) < 40 Humidity IEC 512-11c Circuit Resistance Change (mOhms) < 40 Thermal Shock IEC 512-11d Circuit Resistance Change (mOhms) < 40 Climactic Sequence IEC 512-11a Circuit Resistance Change (mOhms) < 40 Flowing Mixed Gas Corrosion IEC 512-11g Circuit Resistance Change (mOhms) < 40 0.71 [18.1] Twist Preservation Cap 1.43 [36.4] 0.62 [15.8] Module Housing Dimensions are in inches [Dimensions in brackets are metric] WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. COSP253--WW-ENG 5/2016