TX5500™ U/UTP Copper Cable
specifications
Category 5e cable shall exceed IEC 61156-5 and
ANSI/TIA-568-C.2 Category 5e component standards.
The conductors shall be 24 AWG construction with
HDPE insulation. The copper conductors shall be
twisted in pairs and all four pairs shall be covered by
a flame-retardant PVC jacket.
SPECIFICATION SHEET
TX5500 ™ U/UTP Copper
Cabling System
TX5500 ™ UTP Copper Cable
CMR:
Jack module:
technical information
Electrical
performance:
Certified channel performance in a 4-connector configuration up to 100 meters
and exceeds the requirements of ISO 11801 Class D and ANSI/TIA-568-C.2
Category 5e ratified standards at swept frequencies up to 100 MHz
Certified component performance up to 100 meters and exceeds the
component requirement of the IEC 61156-5 and ANSI/TIA-568-C.2
Category 5e ratified standards at swept frequencies up to 100 MHz
Conductors/
insulators:
24 AWG solid copper insulated with HDPE
Certification:
ANATEL 2488-09-6246
Flame rating:
CMR — UL 1666
PoE compliance:
Meets IEEE 802.3af and IEEE 802.3at for PoE applications
Installation
tension:
110 N (25 lbf) maximum
Temperature
rating:
0°C to 50°C (32°F to 122°F) during installation
-20°C to 75°C (-4°F to 167°F) during operation
Cable jacket:
Flame-retardant PVC
Cable diameter:
4.9mm (0.193 in.) nominal
Cable weight:
8.6 kg/305m (19 lbs./1000 ft.)
Packaging:
305m (1000 ft.) in an easy payout carton
Package tested to ISTA Procedure 1A
PUR5504*Y
Mini-Com ® TX5e ™ PLUS UTP
Jack Module
CJ5E88TG**
TX5e UTP Patch Cords – CM
™
Meters:
Feet:
UTPCH1^MY
UTPCH3^^Y
DP5e ™ Angled Punchdown
Patch Panels
24-port, 1 RU:
48-port, 2 RU:
DPA245E88TGY
DPA485E88TGY
DP5e ™ Flat Punchdown
Patch Panels
12-port, 1 RU:
24-port, 1 RU:
48-port, 2 RU:
DP125E88TGY
DP245E88TGY
DP485E88TGY
Mini-Com ® Angled Flush Mount
Modular Patch Panels
24-port, 1 RU:
48-port, 2 RU:
CPPA24FMWBLY
CPPA48FMWBLY
Mini-Com ® Flat Flush Mount
Modular Patch Panels
24-port, 1 RU:
48-port, 2 RU:
CPP24FMWBLY
CPP48FMWBLY
Termination and Cable Prep Tools
key features and benefits
Third party tested
Cable has been tested as part of the TX5500™ U/UTP Copper
Cabling System by an independent laboratory and complies
with the electrical channel requirements of the following
standards: ISO 11801 Class D and ANSI/TIA-568-C.2
Descending length
cable markings
Easy identification of remaining cable reduces installation time
and cable scrap
Tested beyond the standards
Cable has been characterized to 450 MHz, 350 MHz
above the standard
Easy payout carton
Improves installation time and prevents tangling
applications
TX5500™ U/UTP Cable is a component of the Panduit ® TX5500™ Copper Cabling System.
The end-to-end system provides Gigabit Ethernet performance with usable bandwidth beyond
100 MHz. With certified performance to the ANSI/TIA-568-C.2 Category 5e and ISO 11801
Class D standards, this system will support the following applications:
• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet)
• 155 Mb/s ATM, 622 Mb/s ATM
• Token Ring 4/16
w w w . pa n d u it.c o m
Termination
tools:
Wire
snipping
tool:
Wire
stripping
tool:
EGJT or TGJT
CWST
CJAST
*To designate color, add suffix BU (Blue),
IG (International Gray), WH (White) or
YL (Yellow) prior to the Y.
**To designate color, add suffix AW (Arctic
White), IW (Off White), EI (Electric Ivory),
IG (International Gray), WH (White), BL (Black),
OR (Orange), RD (Red), BU (Blue), GR (Green),
YL (Yellow), or VL (Violet).
^For lengths 1 to 10 meters (increments of one
meter) and 0.5, 1.5, 2.5, 15, 20 meters, change
the length designation in the part number to
desired length. For standard colors, add suffix
BU (Blue), GR (Green), RD (Red), YL (Yellow),
IW (Off White) before Y at the end of the part
number. For example, the part number for a
blue, 5-meter patch cord is UTPCH5MBUY.
^^For lengths 1 to 20 feet (increments of one
foot) and 25, 30, 35, 40 feet, change the length
designation in the part number to desired length.
For standard cable colors, add suffix BU (Blue),
GR (Green), RD (Red), YL (Yellow), IW (Off
White) before Y at the end of the part number.
For example, the part number for a blue, 5-foot
patch cord is UTPCH5BUY.
TX5500™ U/UTP Copper Cable
additional specifications
Mechanical Test
Ultimate Breaking Strength
>400 N (90 lbf).
Minimum Bend Radius
Electrical Test
Nominal Velocity of Propagation (NVP)
4 x cable diameter
67%
cable construction
Jacket
Conductor Wire
Conductor Insulator
Rip Cord
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800.777.3300
©2016 Panduit Corp.
ALL RIGHTS RESERVED.
COSP393--WW-ENG
2016-06-09