®
M INI -C OM ® TX6 ™ PLUS Shuttered Jack Module
SPECIFICATION SHEET
specifications
Category 6/Class E eight-position shuttered jack
module shall terminate unshielded twisted 4-pair,
22 – 26 AWG, 100 ohm cable and shall not require
the use of a punchdown tool. Jack module shall use
forward motion termination to optimize performance
by maintaining cable pair geometry and eliminating
conductor untwist. The white termination cap shall
be color coded for T568A and T568B
wiring schemes.
TX6500 ™ and TX6000 ™ Copper
Cabling Systems
MINI-COM ® TX6 ™ PLUS
Shuttered Jack Module
Module:
TX6500 UTP Cable
technical information
Plenum:
Riser:
Category 6/Class E
channel and component
performance:
Exceeds all TIA/EIA-568-B.2-1 Category 6 and ISO 11801
2nd Edition Class E channel standard requirements at
swept frequencies up to 250 MHz
TX6000 ™ UTP Cable
FCC compliance:
Meets FCC Part 68 Subpart F; contacts plated with
50 microinches of gold
IEC compliance:
Meets IEC 60603-7
key features and benefits
100% performance tested
Confidence that each jack module will deliver the critical
electrical performance requirements
Utilizes enhanced
GIGA-TX ™ technology
Optimizes performance by eliminating conductor untwist;
reduces installation expense
Improved termination cap
Conductor retention slots simplify termination
Modularity
Jack modules snap in and out of MINI-COM ®
Faceplates, Modular Patch Panels, and Surface Mount
Boxes for fast moves, adds, and changes
True strain relief
Controls cable bend radius for long-term
installed performance
Individual serialized
Marked with quality control number for traceability
Integral shuttered door
Protects RJ45 jack critical contacts from debris or dirt
when not in use
Industry standard
RJ45 interface
Familiar to end users; backwards compatible
applications
MINI-COM ® TX6 ™ PLUS Shuttered Jack Module
is a component of the TX6500 ™ and TX6000 ™
Copper Cabling Systems. Interoperable and
backward compatible, these end-to-end
systems provide design flexibility to protect
network investments well into the future.
With certified performance to the
TIA/EIA-568-B.2-1 Category 6 and ISO 11801
Class E standards, these systems are ideal
for today's high performance workstation
applications.
w w w. p a n d u i t . c o m
Usage of the TX6500 ™ and TX6000 ™
Copper Cabling Systems include:
• Ethernet 10BASE-T, 100BASE-T (Fast
Ethernet), 1000BASE-T (Gigabit Ethernet),
10000BASE-T (10 Gigabit Ethernet over
limited distances as specified in the industry
10GBASE-T standards)
• 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM
• Token Ring 4/16
• Digital video and broadband/baseband
analog video
• Voice over Internet Protocol (VoIP)
CJD688TG*
™
Plenum:
Riser:
PUP6504**-U
PUR6504**-UY
PUP6004**-UY
PUR6004**-UY
TX6 ™ PLUS Patch Cords
3':
5':
7':
10':
14':
20':
UTPSP3***Y
UTPSP5***Y
UTPSP7***Y
UTPSP10***Y
UTPSP14***Y
UTPSP20***Y
DP6 ™ PLUS Flat
Punchdown Patch Panels
12-port:
24-port, 1 RU:
48-port, 2 RU:
DP12688TGY
DP24688TGY
DP48688TGY
DP6 ™ PLUS Angled
Punchdown Patch Panels
24-port, 1 RU:
48-port, 2 RU:
DPA24688TGY
DPA48688TGY
GP ™ PLUS Category 6
Punchdown System
See website (www.panduit.com)
or catalog for complete
system information
Termination Tools
Jack
termination tool:
Wire snipping tool:
Wire stripping tool:
TGJT
CWST
CJAST
*To designate a color, add suffix IW (Off White),
EI (Electric Ivory), IG (Int'l Gray), WH (White),
BL (Black), OR (Orange), RD (Red), BU (Blue),
GR (Green), YL (Yellow) or VL (Violet).
**To designate color, add suffix BU (Blue),
WH (White), YL (Yellow) or IG (Int'l Gray).
***For lengths 1' to 20' (increments of 1') and 25',
30', 35', 40' change the length designation in the
part number to the desired length. For standard
cable colors other than Off White, add suffix BL
(Black), BU (Blue), GR (Green), RD (Red), YL
(Yellow), OR (Orange), or VL (Violet) before Y
at the end of the part number. For example,
the part number for a blue 15' patch cord
is UTPSP15BUY.
M INI -C OM ® TX6 ™ PLUS Shuttered Jack Module
M I N I - C O M ® T X 6 ™ P L U S S h u t t e r e d J a c k M o d u l e Te s t R e s u l t s
Mechanical Test
Normal Force
Vibration
Test Method
—
IEC 512-6d
Measurement
Load (grams)
Circuit Resistance (mOhms)
Typical Test Results
>100
很抱歉,暂时无法提供与“CJD688TGRD”相匹配的价格&库存,您可以联系我们找货
免费人工找货