Mini-Com® TX6™ PLUS
UTP 28/30 AWG Jack Modules
S P E C I F I C AT I O N S H E E T
specifications
Category 6/Class E, 8-position, UTP jack module shall terminate
4-pair, 28 AWG solid/stranded and 30 AWG solid, 100 ohm
unshielded twisted pair cable and shall not require use of a
punchdown tool. UTP jack modules shall use a forward motion
termination method to optimize performance by maintaining cable
pair geometry while eliminating conductor untwist. The termination
cap shall be color-coded green to designate Category 6 performance
and shall include a universal label coded for T568A and T568B
wiring schemes.
technical information
Category 6/Class E
channel and
component performance:
Exceeds channel requirements of ANSI/TIA-568-C.2 Category 6 and
ISO 11801 Class E standards at swept frequencies 1 to 250 MHz
Exceeds component requirements of ANSI/TIA-568-C.2 Category 6 and
ISO 11801 Class E standards at swept frequencies 1 to 250 MHz
FCC and ANSI
compliance:
Meets ANSI/TIA-1096-A contacts plated with 50 microinches of gold
for superior performance
IEC compliance:
Meets IEC 60603-7
RoHS compliance:
Compliant
PoE compliance:
Meets IEEE 802.3af and IEEE 802.3at for PoE applications
c(UL)US listed:
UL 1863, CSA standard C22.2
Conductor termination
range:
Wire cap compatible with 28 AWG solid/stranded and 30 AWG solid cable with
conductor insulation diameters of 0.025 in. max. and overall cable O.D. 0.120 in.
to 0.185 in.
key features and benefits
100% performance tested
Confidence that each jack module will deliver the critical electrical
performance requirements
Utilizes enhanced
Giga-TX ™ Technology
Optimizes performance by eliminating conductor untwist and reduces
installation time and expense
Improved termination cap
Conductor retention slots simplify jack module termination
Modular
UTP jack modules snap in and out of all Mini-Com® Faceplates, Modular Patch
Panels and Surface Mount Boxes for easy moves, adds, and changes
True strain relief
Controls cable bend radius for long term installed performance
Individually serialized
Marked with quality control number for future traceability
RJ45 interface
Industry standard interface provides a quick and easy plug and play connection
to RJ45 patch cords; backwards compatible
Identification
Can be clearly identified with optional labels and icons for port identification
Termination tools (optional)
EGJT termination tool ensures conductors are fully terminated by utilizing a
smooth forward motion without impact on critical internal components for
maximum reliability; TGJT termination tool ideal for high volume installations
Block out device (optional)
Provides a simple and secure method to control access to data ports while not
in use
applications
Mini-Com® TX6™ PLUS UTP Jack Modules are a component of the TX6™ PLUS UTP Copper Cabling System. This
end-to-end system is interoperable and backwards compatible, providing design flexibility to protect network
investments well into the future. With certified performance to the ANSI/TIA-568-C.2 Category 6 and ISO 11801
Class E standards, this system is ideal for today's high performance workstation applications. With certified
performance to the ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E Edition 2.1 standards, these systems
will support the following applications:
•
•
•
•
•
Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet)
155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM
Token Ring 4/16
Digital video and broadband/baseband analog video
Voice over Internet Protocol (VoIP)
w w w. p a n d u i t . c o m
TX6 ™ PLUS UTP Copper
Cabling Systems
Mini-Com ® TX6 ™ PLUS UTP
Jack Modules
Jack module:
CJT688TGIW*
TX6™ PLUS 28 AWG Patch Cords
Feet:
Meters:
UTP28SP**
UTP28SP***M
Mini-Com ® Angled Modular
Patch Panels
24-port, 1 RU:
48-port, 2 RU:
CPPLA24WBLY
CPPLA48WBLY
Mini-Com ® Flat Modular
Patch Panels
24-port, 1 RU:
CPPL24WBLY
48-port, 2 RU:
CPPL48WBLY
For additional modular patch panels and punchdown
patch panels, visit www.panduit.com
Tools and Accessories
Jack module
termination tool:
Wire snipping tool:
Wire stripping tool:
Clear dust cap:
Block out device:
Phone icons:
Data icons:
EGJT or TGJT
CWST
CJAST
MDC-C
PSL-DCJB-^^^
CIPIW-C+
CIDIW-C+
*To designate color other than IW (Off White), replace
IW suffix with EI (Electric Ivory), IG (International Gray),
AW (Arctic White), BL (Black), BU (Blue), RD (Red),
YL (Yellow), GR (Green), OR (Orange), or VL (Violet).
**For lengths 1 to 20 feet (increments of one foot),
change the length designation in the part number to the
desired length. For standard cable colors other that Off
White, add suffix BL (Black), BU (Blue), GR (Green),
RD (Red), YL (Yellow), OR (Orange), or VL (Violet). For
example, the part number for a blue 15-foot patch cord
is UTP28SP15BU.
***For lengths 0.5 to 6 meters (increments of half meter). For
standard cable colors other than Off White, add
suffix BL (Black), BU (Blue), GR (Green), RD (Red), YL
(Yellow), OR (Orange), or VL (Violet). For example,
the part number for a blue 5-meter patch cord is
UTP28SP5MBU.
^^^To designate color other than Red, add suffix
Black (BL), Blue (BU), Yellow (YL), Green (GR),
Orange (OR), Off White (IW) or International Gray (IG)
at the end of the part number. 10/package.
+To designate color other than IW (Off White), replace
IW with EI (Electric Ivory), IG (International Gray),
BL (Black), BU (Blue), RD (Red), YL (Yellow),
GR (Green), OR (Orange), or VL (Violet) in the part
number. 100/package.
Contact customer service for bulk packaged jack
modules and patch cords.
Mini-Com® TX6™ PLUS UTP 28/30 AWG Jack Modules
test results
Mechanical Test
Normal Force
Vibration
Test Method
—
IEC 512-6d
Measurement
Load (grams)
Circuit Resistance (mOhms)
Typical Test Results
>100
