CMBRS485RD

M INI -C OM ® BAS Connector Module ® SPECIFICATION SHEET specifications Industry standard field bus connector shall terminate up to three 18 – 22 AWG connectors or shielded/unshielded cable and shall terminate with the use of a screwdriver. Connector shall mount in patch panels and/or wall plates. The plug end shall be removable from the socket module for disconnection, diagnostic, and termination purposes. technical information AWG conductor: Nominal current rating: Contact resistance: Voltage rating: Electric shock protection to DIN VDE 0470: Stripping: Wire end ferrule, DIN 46 228/1: Clamping screw: Tightening torque: Pitch (mm/In.): Colors: 22 AWG min/18 AWG max 10 A 4.5 mOhms 300 V max IP 20 (safe from finger touch) 7mm .2mm2 min /2.5mm2 max M 2.5 .4 Nm min/.5 Nm max .20''/5.08mm Connector (Plug and Socket) – Black, Module – Orange, Black, Blue, Green, Red or Yellow MINI-COM ® BAS Connector Module Orange module: CMBRS485OR Black module: CMBRS485BL Blue module: CMBRS485BU Green module: CMBRS485GR Red module: CMBRS485RD Yellow module: CMBRS485YL PANZONE ® Active Zone Cabling Box In-ceiling: CICZC2X2A MINI-COM Modular Faceplate Patch Panel with Labels ® 24 port: CPPL24WBL 48 port: CPPL48WBL Insulated Ferrules – Single Wire DIN End Sleeve 22 AWG white: FSD75-6-D 20 AWG gray: FSD76-6-D 18 AWG red: FSD77-6-D Ferrule Crimping Tools key features and benefits Modularity Dual module snaps in and out of all PANDUIT ® MINI-COM ® faceplates, modular patch panels, and surface mount boxes for fast moves, adds, and changes Screw terminals No punchdown tool required; terminates with screwdriver (SD 0.6 x 3.5 DIN 5264) Applications · · · · Zone application Provides a common demarcation point for BAS networks and low voltage power for building systems Connector (Plug and Socket) Ease of connection and disconnection of power gives the ability to segment networks LON BACnet MSTP Modbus* RTU Low voltage pass through applications The MINI-COM ® BAS Connector Module supports deployment of field bus networks and low voltage system wiring within the IT network pathways. The module creates a demarcation point for the field bus cabling to be “patched” along with other building networks (Ethernet, Video, Audio) within the zone enclosure from the controller out to the endpoints. This allows for a smooth transition to IP Enabled devices as they are deployed. The MINI-COM ® BAS Connector Module easily integrates with other PANDUIT offerings such as zone cabling, DPoE™, jack modules and copper/fiber cabling systems to leverage a common network infrastructure. *Modbus is a registered trademark of Modbus Organization, Inc. w w w. p a n d u i t . c o m Ferrule end sleeve: CT-1123 M INI -C OM ® BAS Connector Module MINI-COM ® BAS Connector Module Electrical Performance Parameters Nominal Current Rating Volume Resistance Performance 10 A 4.5 mOhms Voltage Cable Gauge 300 V Max 18 – 22 AWG Top View 1.37 [34.8] 1.92 [48.7] Front View Side View .72 [18.3] .54 [13.8] 1.24 [31.5] Dimensions are in inches [Dimensions in brackets are metric] WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6379.6700 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.3767.7011 PANDUIT LATIN AMERICA Jalisco, Mexico cs-la@panduit.com Phone: 52.333.777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800-777-3300 and reference COSP60 ©2006 PANDUIT Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. WW-COSP60 10/2006