CMMJEI

specifications TM Fiber/Multi-Media boxes shall be 6 and 12 port low profile multimedia boxes with a “captive” spool to store up to 24 meters of buffered optical fiber. All connections exit one side of the box parallel to the wall. The boxes mount with screws or adhesive. The boxes accept tamper resistant screws concealed by screw covers and labels. The box covers include breakouts for use with surface raceway and cable tie slots to provide strain relief on incoming cables. NETWORK CONNECTIVITY GROUP SPEC SHEET MINI-COM ® Multi-Media/Fiber Surface Mount Boxes Multi-Media/Fiber Surface Mount Boxes technical information 6 module space: 12 module space: Dimensions: CBXF6=HxWxD=.99x4.1x6.67in. (25x120x170mm) CBXF12=HxWxD=1.81x4.71x6.67in. (46x120x170mm) Mounting options: Holes spaced for single gang, double gang and DIN size opening. Adhesive tape is supplied for surface mounting Fiber spool capacity: 78.8ft (24m) of buffered fiber Material: ABS plastic Compatible raceways: CBXF6 - LD3, LD5 CBXF12 - LD3, LD5, LD10 Packaging: Supplied with cable ties, adhesive tape, label/label cover, screw cover, mounting screws and tamper resistant screws key features and ...benefits Low profile Less noticeable, blends into the wall, less chance of getting bumped Modularity Accepts MINI-COM Modules for copper and fiber applications CBXF6**-A CBXF12**-A MINI-COM Modules Copper modules Category 6: CJ688T3^^ Category 5e: CJ5E88T^^ Fiber optic adapter modules SC duplex (MM/SM): CMDBUSCBL SC simplex (MM/SM): CMSEISCEI ST simplex (MM/SM): CMSTEI MT-RJ duplex (MM): CMMJEI FC simplex (MM/SM): CMFCEI Fiber optic FJ duplex jack modules FJ OPTI-CRIMP ™ 62.5µm: FJJSMM5CEI FJ OPTI-CRIMP 50µm: FJJSMM50CEI FJ field polish 62.5/50µm: FJJGM5CEI FJ field polish 9µm: FJJGS9CBU (^^ Substitute: IW=Off White, EI=Electric Ivory, IG=International Gray, WH=White, BL=Black, OR=Orange, RD=Red, BU=Blue, GR=Green, YL=Yellow, VL=Violet) Accessories Opaque cover: Label/label cover kit: Label/label cover kit with screws: CSC**-X CSGLLC-L EFPK-X Self Adhesive Marker Books Built-in fiber spool Meets TIA/EIA-568B requirements for spooling of 1M of fibers Voice, data and fax icons: Blank for write ons: Raceway breakouts Provides multilple options for cable routing, including side, rear and bottom of base ** Substitute: Tamper resistant screw Protects terminations from tampering by securing the base to the cover Label and label cover Provides identification of outlet station 12 port density More capacity for high density applications applications The multi-media surface mount boxes allow MINI-COM modules to be mounted on a wall, filing cabinet, modular furniture or underside of a workstation. The surface mount box raceway breakouts and opening in the bottom of the base make cable routing easy. The high density 12 port surface mount box can be used as Multi-User Telecommunications Outlet Assembly (MuTOA). This allows several workstations to be serviced from one centralized connection point. Patch cords are routed from the surface mount box directly to the work area equipment, where many moves, adds and changes can be handled with ease. The captive fiber spool accommodates the spooling of fiber cable in multi-media applications. V i s i t o u r w e b s i t e a t : w w w. p a n d u i t . c o m / n c g PSCB-COM PSCB-BLNK EI = Electrical Ivory BL = Black IG = International Gray IW = Off White WH = White MINI-COM ® Multi-Media/Fiber Surface Mount Boxes 6 Module Space Multi-Media/Fiber Box 12 Module Space Multi-Media/Fiber Box Dimensions are in inches (Dimensions in parentheses are in metric) Our products are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to the replacement of any product proved to be defective within 6 months (for product) or 90 days (for tools) from the date of delivery. Tool warranty is void if Panduit tools are modified, altered or misused in any way. Use of Panduit tooling with any product other than the specified Panduit products for which the tool was designed, constitutes misuse. Before using, user shall determine the suitability of the product for his intended use and user assumes all risk and liability whatsoever in connection therewith. NETWORK CONNECTIVITY GROUP PANDUIT CANADA Markham, Ontario Phone: 800-777-3300 PANDUIT EUROPE LTD. London, UK Phone: 44 208-601-7200 WORLD HEADQUARTERS PANDUIT CORP. Tinley Park, Illinois, USA 60477-3091 Customer Service: 800-777-3300 Technical Support: 866-405-6654 Fax: 708-444-6993 Email: ncginfo@panduit.com Internet: www.panduit.com/ncg PANDUIT SINGAPORE PTE. LTD. Republic of Singapore Phone: (65) 379 6700 WORLDWIDE SUBSIDIARIES AND SALES OFFICES This warranty is made in lieu of and excludes all other warranties, expressed or implied. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE ARE SPECIFICALLY EXCLUDED. Neither seller nor manufacturer shall be liable for any other injury, loss or damage whether direct or consequential, arising out of the use of, or the inability to use, the product. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements consult the factory. This publication is not be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. For Pricing and Further Information — Contact your local authorized PANDUIT PAN-NET ® Distributor or Sales Office PANDUIT JAPAN Tokyo, Japan Phone (81) (3) 3767-7011 PANDUIT LATIN AMERICA Jalisco, Mexico Phone: (52) 3 666-2501 © PANDUIT Corp. 2002 ALL RIGHTS RESERVED PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia Phone: (61) 3-9794 9020 SA-NCSP1030A Printed in U.S.A.