CMUT19

NetFrame® Cable Management Rack System S P E C I F I C AT I O N S H E E T specifications Cable management rack shall be constructed of steel and capable of mounting as 19" or 23" EIA rack. The vertical channels shall have side and front pass through holes. The vertical channels shall have slots that can accommodate plastic d-rings, plastic bend radius fingers, and spools to provide vertical cable management. The rear of the channel shall have an unequal flange design that allows access to cables inside the channel. The top of the rack shall have integral waterfalls that feed to the front and center of the vertical channels. The rack shall be capable of accepting steel, full length, hinged doors. Rack construction method shall ensure an electrically bonded structure for ease of grounding. 19" or 23" x 7': NFR84 NetFrame ® Vertical Cable Management Options 4" x 6"D-ring kit (8): Center D-ring kit (16): Bend radius finger kit (8): Fiber slack spool: NFDR4X6K NFCDRK NFBRFK NFSK NetFrame ® Shelves technical information Dimensions: NFR84 (19") – 86.0"H x 28.4"W x 17.0"D (2183mm x 721mm x 432mm) NFR84 (23") – 86.0"H x 32.4"W x 17.0"D (2183mm x 823mm x 432mm) Standards: Meets all EIA requirements as defined in EIA-310-D Packaging: Packaged with two vertical channels, top and bottom brackets, assembly hardware that bonds the rack and installation instructions key features and benefits Modular system NetFrame ® Rack System Multiple vertical cable management options install easily and allow user to configure system to their preferences 19"W x 18"D: 19"W x 25"D: NFSHLF19X18 NFSHLF19X25 NetFrame ® Accessories Hinged metal door (4" x 7'): (8" x 7'): (12" x 7'): Ladder rack bracket: End panel: Slack manager: NFD484 NFD884 NFD1284 NFLRB NFEP NFVSM4 Troughs 19" lower with 1.3" bend radius: 19" upper: 19" lower: Mounts as 19" or 23" EIA rack Suitable for a variety of applications Rack space identification (numbered at every fifth position) Allows for quick and easy location of rack spaces, speeding installation of horizontal rack mount items Fully bonded structure Two hole lug attachment simplifies grounding to assure proper grounding technique 15 A: 20 A: 1500 lb. load rating Accommodates large networking equipment Power Strips 19" Vertical Deep vertical channel Provides pathway for distribution cable Open rear channel Provides easy access to cables inside of vertical channel simplifying moves, adds, and changes 39" single circuit: CMRPSV20 66" dual circuit: CMRPSVD20 Optional hinged metal door Provides easy access to vertical pathway without having to completely remove door Integral waterfalls Provides bend radius control for cables as they go to the front and inside of the vertical channels Pass through holes Located on front and side to allow access from the patching surface to the back of equipment as well as between racks Power Strips 19" Horizontal applications The NetFrame® Cable Management Rack System is designed to support heavy networking equipment and can be used in cross-connect and interconnect applications in a telecommunications room. The NetFrame® System is completely modular and can manage high performance copper and fiber patch cables. w w w. pa n d u it.c o m CMLT19 CMUT19 CMT4 This modular rack system is compatible with the Panduit horizontal cable management panels, including the NetManager™ Cable Manager, PatchLink™, and Open-Access™ D-ring options, Opticom® Fiber Optic Enclosures, and Mini-Com® Patch Panels. CMRPSH15 CMRPSH20 NetFrame® Cable Management Rack System 5 6 3b 4 1 2 3a 1 2 NFR84 – NetFrame® 19" Equipment Rack, 45 RU NFBRFK – Vertical Cable Management, kit of (8) bend radius fingers HINGED DOORS 3a NFD884 – Dual Hinge, 8" wide for use in covering two adjacent pathways 3b NFD484 – Single Hinge, 4" wide 4 NFEP – End Panel 5 NFLRB – Ladder Rack Support Bracket, for parallel and perpendicular attachment of ladder rack 6 NCMHAEF4 – Cable Pathway WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2013 Panduit Corp. ALL RIGHTS RESERVED. RKSP128--WW-ENG Replaces WW-RKSP01 4/2013