CMVDR2

Vertical Cable Management D-Rings SPECIFICATION SHEET specifications A vertical cable management solution of flexible D-rings shall be used on standard communication racks. The vertical D-rings used for open access shall be manufactured from a polycarbonate material and shall be black in color. The vertical cable management D-rings shall be a one-piece design. The front arm of the product shall be able to rotate ninety degrees to allow entire cable bundles to be inserted. The vertical cable management solution of flexible D-rings shall be installed with two screws less than 0.25" diameter. Vertical D-rings 1": 1" short: 2": 2" short: Center: CMVDR1 CMVDR1S CMVDR2 CMVDR2S CMVDRC Racks 19" rack: 23" rack: R2P R2PW Horizontal D-ring Systems technical information Dimensions: Height In. (mm) 2.38 (60.5) 2.38 (60.5) 2.38 (60.5) 2.38 (60.5) 1.75 (44.5) Part Number CMVDR1 CMVDR1S CMVDR2 CMVDR2S CMVDRC Capacity: Width In. (mm) 2.05 (52.1) 2.05 (52.1) 3.30 (83.8) 3.30 (83.8) 8.75 (222.3) Depth In. (mm) 5.72 (145.2) 3.26 (82.8) 5.72 (145.2) 3.26 (82.8) 5.66 (143.8) Channel Area (in2) Cat. 6A (28AWG – 0.185") Cat. 6A (24AWG – 0.275") Cat. 6 (28AWG – 0.150") Cat. 6 (24AWG – 0.235") CMVDR1 7.1 105 47 160 65 CMVDR1S 3.5 52 23 80 32 CMVDR2 14.5 215 97 328 133 CMVDR2S 7.1 105 47 160 65 CMVDRC 30.1 447 202 680 277 Part Number Packaging: Packaged one per bag Standards: Meets all EIA requirements as defined in EIA-310D; manufactured from a material that meets UL94-V0 specifications key features and benefits EIA mounting holes Capable of being applied to any standard EIA rack system Flexible arm Provides open access that allows installation of complete cable bundles Rounded edges Prevents sharp edges in contact with cable insulation 1/4" screw holes Utilize a wide variety of screws to secure product to wall or rack applications Panduit Vertical Cable Management D-rings are designed to contain cables in a vertical pathway. The cable management D-rings are a labor-saving solution that provides the installer the ability to insert complete cable bundles. w w w . pa n d u it.c o m Use these vertical D-rings in conjunction with horizontal D-rings for a complete open access solution on rack systems. Products may also be mounted onto a wall or other flat surfaces with a variety of screws. 2RU front and rear: 2RU front: 1RU front and rear: 1RU front: CMPH2 CMPHF2 CMPH1 CMPHF1 Accessories 12-24 mounting screws: Flat post standoff: Flat post standoff flame retardant: Flat post standoff Tak-Ty ® Cable Ties compatible: Flat post standoff Tak-Ty ® Cable Ties compatible flame retardant: Bend radius clip: 1RU strain relief clip: 2RU strain relief clip: Bundle retainer: Adhesive bundle retainer: S1224-C PPF2S-S25-V PPF2S-S25-V69 PPF2SV-S25-V PPF2SV-S25-V69 CMSRC2 WMSRC1 WMSRC2 BR2-1.3 BR2-1.3-A Installer Tip: CMVDRC requires 8.25" center to center hole spacing for adjacent racks. Vertical Cable Management D-Rings mmo ou u n tnitni gn gc oc no fni fgiugruartai ot inosn s 1 3 6 4 2 5 7 1 2 3 4 5 6 7 CMVDR1 CMVDR1S CMVDRC mounted to front of rack CMVDRC mounted to front of rack and CMVDRC mounted to back of rack Two CMVDRC parts mounted to front of rack; one opens toward the back CMVDR2 CMVDR2S WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2016 Panduit Corp. ALL RIGHTS RESERVED. WASP40--WW-ENG Replaces SA-WASP1035B 7/2016