CT-1003.

ELECTRICAL SOLUTIONS A. System Overview Controlled Cycle Crimping Tools • Specialty crimping tools for fully insulated right angle disconnects and heat shrink insulated terminals, disconnects, and splices B1. Cable Ties • Controlled cycle mechanism assures high quality, consistent terminations Part Number CT-300-1 Part Description Crimps Panduit #22 – 14 AWG fully insulated right angle disconnects (DNFR-FIB series). CT-310 Crimps Panduit #22 – 10 AWG heat shrink insulated terminals, disconnects, and splices. Std. Pkg. Qty. 1 1 CT-1002 Part Number CT-1002 • Ergonomic tool design assures operator comfort, safety, and performance • Multi-position locator facilitates a high quality repeatable crimp Part Description Controlled cycle crimp tool with trapezoid profile for #26 – 10 AWG (0.14 – 6.0mm²) insulated and non-insulated single wire ferrules and #22 – 12 AWG (0.50 – 4.0mm²) insulated twin wire ferrules. C2. Surface Raceway Std. Pkg. Qty. 1 CT-1003 Controlled cycle crimp tool with trapezoid profile for #22 – 8 AWG (0.50 –10.0mm²) insulated and non-insulated ferrules and #22 – 10 AWG (0.50 – 6.0mm²) insulated twin wire ferrules. 1 CT-1004 Controlled cycle crimp tool with trapezoid profile for #8 – 6 AWG (10.0 – 16.0mm²) insulated and non-insulated ferrules and #10 AWG (6.0mm²) insulated twin wire ferrules. 1 CT-1005 Controlled cycle crimp tool with trapezoid profile for #4 – 2 AWG (26.0 – 35.0mm²) insulated and non-insulated ferrules. 1 CT-1006 Controlled cycle crimp tool with trapezoid profile for #1 AWG (50.0mm²) insulated and non-insulated ferrules. 1 CT-1104 Controlled cycle crimp tool with square profile for #8 – 6 AWG (10.0 – 16.0mm²) insulated and non-insulated ferrules and #10 AWG (6.0mm²) insulated twin wire ferrules. 1 CT-1123 Controlled cycle crimp tool with square profile for #26 – 8 AWG (0.14 – 10.0mm²) insulated and non-insulated ferrules and #22 – 12 AWG (0.50 – 4.0mm²) insulated twin wire ferrules. 1 CT-1003 CT-1004 B3. Stainless Steel Ties C1. Wiring Duct Controlled Cycle Crimping Tools – Ferrule End Sleeve • Specifically designed for the installation of Pan-Term ® Ferrules • Controlled cycle mechanism assures high quality, consistent terminations B2. Cable Accessories C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems CT-1005 E2. Labels E3. Pre-Printed & Write-On Markers CT-1006 E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions CT-1104 F. Index CT-1123 For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) D1.85