ELECTRICAL SOLUTIONS
A.
System
Overview
Hydraulic Pump and Accessories, Electric, 7,500 PSI
• Develops 7,500 psi of hydraulic pressure
• Easy to operate using manual switch or remote pendant supplied;
or optional CT-901RFS foot switch
• Factory set relief valve, pump stops when crimp is complete
Part Number
CT-8250HP
• Convenient 120 VAC operation
• Incorporates Parker type quick-connect fittings to ease installation
and save time
• Versatile, can be used with Panduit CT-930LPCH or
CT-980LPCH crimp heads
Part Description
Hydraulic pump. Develops 7,500 psi output. Pump shuts off when cycle is complete.
Will not release until down switch is activated. Compatible with CT-900LPHPH
hydraulic hose, CT-930LPCH, and CT-980LPCH crimp heads sold separately.*
Std.
Pkg.
Qty.
1
Specifications:
Pump output: 7,500 psi
Tank capacity: 2.5L incorporates sight gauge for visual inspection of fluid level
Fluid type: Aero Shell #4 or equal
Motor: 120 VAC 50/50Hz
Current: 6.5 Amps
Horsepower: 1/2 hp
Warranty: 5 years
CT-8250HP
CT-901RFS
CT-901RFS
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
C3.
Abrasion
Protection
CT-8250HP pump includes:
• On/off pendant switch on 10' electric cord
• Three prong A/C plug on 10' electric cord
• Supplied with male Parker type quick-connect fitting assembled to pump
CT-900LPHPH
B2.
Cable
Accessories
C1.
Wiring
Duct
Weight: 34 lbs.
Length: 7"
Height: 14"
Width: 6"
CT-900LPHPH
B1.
Cable Ties
C4.
Cable
Management
Electrically non-conductive 10' hose compatible with Panduit CT-8250HP hydraulic
pump and CT-930LPCH and CT-980LPCH crimp heads, supplied pre-filled with
hydraulic fluid for fast start up. Supplied with two female Parker type quick-connect
fittings. Warranty: 5 years.
1
Dual electrical foot switch that allows convenient “hands free” operation of the
Panduit CT-901HP or CT-8250HP electric hydraulic pumps used with Panduit remote
hydraulic crimp heads. Supplied with 10' electric cord that can be directly connected
to Panduit hydraulic pumps. Warranty: 5 years.
1
D1.
Terminals
*For more information on crimp heads, see pages D3.48 and D3.54.
PG-1 in-line pressure gauge provides visual measurement of hydraulic output pressure, sold separately,
see page D3.55.
D2.
Power
Connectors
D3.
Grounding
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
E4.
Permanent
Identification
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
D3.49
很抱歉,暂时无法提供与“CT-900LPHPH”相匹配的价格&库存,您可以联系我们找货
免费人工找货