CT-902RFS

Tool Solutions Hydraulic Pump and Accessories, Electric, 10,000 PSI A. Cable Ties ●●Develops 10,000 psi of hydraulic pressure ●●Easy to operate using manual switch or remote pendant supplied; or optional CT-901RFS foot switch or CT-901RCH remote controlled handle ●●Factory set relief valve, pump stops when crimp is complete Part Number CT-902HP B. Stainless Steel D. Terminals and Reel Smart™ System CT-902RCH CT-900HPH CT-902RFS CT-902RCH CT-902RFS E. Power Connectors and Grounding ●●Incorporates Parker type quick-connect fittings to ease installation and save time ●●Versatile, can be used with Panduit CT-930CH, CT-940CH, or CT-980CH crimp heads Part Description Hydraulic pump. Develops 10,000 PSI output. Pump shuts off when cycle is complete. Will not release until down switch is activated. Compatible with CT-900HPH hydraulic hose, CT-930CH, CT-940CH, and CT-980CH crimp heads sold separately.* Std. Pkg. Qty. 1 Specifications: Pump output: 10,000 psi Tank capacity: 2.5L incorporates sight gauge for visual inspection of fluid level Fluid type: Aero Shell #4 or equal Motor: 120 VAC 50/50Hz Current: 6.5 Amps Horsepower: 1/2 hp Weight: 34 lbs. Length: 7" Height: 14" Width: 6" Warranty: 1 year CT-900HPH C. Wiring Duct ●●Convenient 120 VAC operation CT-902HP pump includes: • On/off pendant switch on 10' electric cord • Three prong A/C plug on 10' electric cord • Supplied with female Parker type quick-connect fitting assembled to pump Electrically non-conductive 10' hose compatible with Panduit CT-901HP hydraulic pump and CT-930CH, CT-940CH, and CT-980CH crimp heads, supplied pre-filled with hydraulic fluid for fast start up. Supplied with two male Parker type quick-connect fittings. Warranty: 1 year. Remote control handle provides plastic carrying handle incorporating on/ off activation switch that allows operator to hold crimp head and activate CT-901HP hydraulic pump with one hand. Use with Panduit remote hydraulic crimp heads CT-930CH, CT-940CH, and CT-980CH. Equipped with 3/8" Parker type quick-connect coupler for attaching crimp heads to Panduit CT-900HPH hydraulic hose. Includes a 10', three wire control cable that can be directly connected to the CT-901HP pump. Warranty: 1 year. Dual electrical foot switch that allows convenient “hands free” operation of the Panduit CT-901HP or CT-8250HP electric hydraulic pumps used with Panduit remote hydraulic crimp heads. Supplied with 10' electric cord that can be directly connected to Panduit hydraulic pumps. Warranty: 1 year. 1 1 1 *For information on crimp heads, see pages E.14, E.15, and E.23. F. Part Number Index E.16 Order number of pieces required, in multiples of Standard Package Quantity. 2016_IEI_E_Grounding Connectors_TC_v4.indd 16 7/25/16 7:56 AM Power Connectors and Grounding Die Type, Remote Hydraulic, 7.7 Tons, Crimp Head ●●Low pressure system extends life of crimp head for high volume crimping applications ●●Develops 7.7 tons of crimping force when used with 5000 psi hydraulic pump and hose, crimps copper compression lugs and splices up to 600 kcmil ●●Incorporates Parker type quick-connect fittings to ease installation and save time ●●High quality, durable tool construction and low pressure hydraulic requirements provide long-term dependability and tool life ●●Provides UL Listed and CSA Certified connections on Panduit ® Pan-Lug™ Copper Lugs and Splices Part Number CT-930LPCH ●●Open “C-Head” design allows easy loading of crimping dies and connectors, saves time ●●Uses color-coded crimping dies to provide easy matching of crimping die to connector A. Cable Ties ●●Embosses die index number on connector barrels for post crimp inspection ●●Dies installed using spring loaded die retention pins, no need for tools ●●Cast in handle allows crimp head to be mounted in a bench vice Part Description Remote hydraulic crimp head provides UL Listed or Recognized terminations of Panduit ® Pan-Lug™ Copper Compression Lugs and Splices for #8 AWG – 600 kcmil copper code conductor. B. Stainless Steel Std. Pkg. Qty. 1 Use with Panduit CT-8250HP hydraulic pump and CT-900LPHPH 10' hydraulic hose.* Specifications: Output: 7.7 tons Jaw opening: 1.65" Weight: 11 lbs. Length: 12 1/4" Height: 5" Width: 3" Warranty: 1 year CT-930LPCH includes: • Tool •S  teel tool case •S  upplied with male Parker type quick-connect fitting assembled to tool Uses CD-920 color-coded crimping dies. Dies must be purchased separately, see page E.19. PG-1 in-line pressure gauge provides visual measurement of hydraulic output pressure, sold separately, see page E.24. *For information on hydraulic pump and hose, see page E.18. C. Wiring Duct D. Terminals and Reel Smart™ System E. Power Connectors and Grounding F. Part Number Index www.panduit.com 2016_IEI_E_Grounding Connectors_TC_v4.indd 17 For service and technical support, call 800-777-3300. E.17 7/25/16 7:56 AM Tool Solutions Hydraulic Pump and Accessories, Electric, 5000 PSI A. Cable Ties ●●Develops 5,000 psi of hydraulic pressure ●●Convenient 120 VAC operation ●●Factory set relief valve, pump stops when crimp is complete ●●Versatile, can be used with Panduit CT-930LPCH or CT-980LPCH crimp heads ●●Easy to operate using manual switch or remote pendant supplied; or optional CT-901RFS foot switch Part Number CT-902HP-5K B. Stainless Steel Part Description Hydraulic pump. Develops 5,000 psi output. Pump shuts off when cycle is complete. Will not release until down switch is activated. Compatible with CT-900LPHPH hydraulic hose, CT-930LPCH, and CT-980LPCH crimp heads sold separately.* Std. Pkg. Qty. 1 Specifications: Pump output: 5000 psi Tank capacity: 2.5L incorporates sight gauge for visual inspection of fluid level Fluid type: Aero Shell #4 or equal Motor: 120 VAC 50/50Hz Current: 6.5 Amps Horsepower: 1/2 hp Warranty: 1 year CT-900LPHPH Weight: 34 lbs. Length: 7" Height: 14" Width: 6" C. Wiring Duct CT-902RFS CT-900LPHPH D. Terminals and Reel Smart™ System ●●Incorporates Parker type quick-connect fittings to ease installation and save time CT-902RFS CT-8250HP pump includes: • On/off pendant switch on 10' electric cord • Three prong A/C plug on 10' electric cord • Supplied with male Parker type quick-connect fitting assembled to pump Electrically non-conductive 10' hose compatible with Panduit CT-8250HP hydraulic pump and CT-930LPCH and CT-980LPCH crimp heads, supplied pre-filled with hydraulic fluid for fast start up. Supplied with two female Parker type quick-connect fittings. Warranty: 1 year. Dual electrical foot switch that allows convenient “hands free” operation of the Panduit CT-901HP or CT-8250HP electric hydraulic pumps used with Panduit remote hydraulic crimp heads. Supplied with 10' electric cord that can be directly connected to Panduit hydraulic pumps. Warranty: 1 year. 1 1 *For more information on crimp heads, see pages E.17 and E.23. PG-1 in-line pressure gauge provides visual measurement of hydraulic output pressure, sold separately, see page E.24. E. Power Connectors and Grounding F. Part Number Index E.18 Order number of pieces required, in multiples of Standard Package Quantity. 2016_IEI_E_Grounding Connectors_TC_v4.indd 18 7/25/16 7:56 AM