CVR2-1

ELECTRICAL SOLUTIONS A. System Overview Clear Covers for HTCT HTAPs B1. Cable Ties Type CLRCVR • Made of high impact plastic to provide high impact strength and 360° inspections of crimped connection to assure the crimp is complete and the correct die was used • Incorporate dual self-latching spring loaded latches and supplied with two Panduit UL 94 V-0 cable ties to allow for easy snap-on assembly and ensure covers are secured • Low profile design minimizes space requirements • Each cover half supports installation information labels inside plastic retainer strips to allow labels to be viewed on either side of cover and to protect labels from being removed • Incorporate molded in flash barriers which encompass the HTAP installation providing protection against electrical flash over • UL 94 V-0 flame rating and oxygen index of 28 providing self-extinguishing, flame retardant properties • Part number, voltage rating, temperature rating and HTCT part number molded into cover for easy identification • See page D3.33 for detailed installation instructions L B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct W C2. Surface Raceway H C3. Abrasion Protection Figure Dimensions In. (mm) Part Number CLRCVR1-1 Use with HTAP Part Number HTCT6X-6X CLRCVR2-1 HTCT2-2 CLRCVR3-1 HTCT250-2, HTCT250-250 L 4.48 (113.8) 5.10 (129.5) 5.35 (135.9) W 1.41 (35.8) 1.66 (42.2) 2.16 (54.9) H 1.20 (30.5) 1.40 (35.6) 1.40 (35.6) Std. Pkg. Qty. 1 C4. Cable Management 1 1 D1. Terminals D2. Power Connectors Black Covers for Copper HTAPs and CTAPs • Used to insulate connectors and protect tap connections from corrosive environments • UL Listed and CSA Certified with approved connectors for use up to 600 V and temperature rated to 90° C D3. Grounding Connectors • Made of durable, weather-resistant black polypropylene • Double locking latches provide secure cover installation E1. Labeling Systems L W E2. Labels H E3. Pre-Printed & Write-On Markers Figure Dimensions (In.) Part Number CVR6-1 CVR2-1 Use with CTAP Part Number CTAP4-8-L, CTAP4-6-L, CTAP4-4-L Use with HTAP Part Number HTCT6X-6X-1 L 2.00 W 1.20 H 1.26 Std. Pkg. Qty. 1 CTAP2-4-Q, CTAP2-2-X, CTAP2/0-2-X HTCT2-2-1 3.38 1.40 2.00 1 CVR250-1 CTAP2/0-2/0-X HTCT250-2-1, HTCT250-250-1 3.38 1.55 2.05 1 CVR500-1* CTAP4/0-2-X, CTAP4/0-2/0-X, CTAP4/0-4/0-X — 3.86 1.97 2.66 1 CVR1000-1* — — 5.62 2.45 3.72 1 For information on copper HTAPs, see page D3.14 For information on copper CTAPs, see page D3.12 *Not CSA Certified. For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index D3.13