PANDUCT ® Wiring Duct and
Accessories
Table of Contents
Wiring Duct Applications
Wiring Duct Applications............................................... 2-3
Slotted Wall Wiring Duct
Type G Part Numbers & New Sizes................................. 4
Type F Part Numbers & New Sizes ................................. 6
Type E Part Numbers & Sizes ....................................... 20
Solid Wall Raceway
Type FS Part Numbers & New Sizes............................... 8
Type S Part Numbers & Sizes ....................................... 21
Halogen Free Slotted Wall Wiring Duct
Type NE Part Numbers & Sizes..................................... 10
Halogen Free Solid Wall Raceway
Type NS Part Numbers & Sizes..................................... 12
Polycarbonate Slotted Wall Wiring Duct
Type PE Part Numbers & Sizes..................................... 14
Polycarbonate Solid Wall Raceway
Type PS Part Numbers & Sizes..................................... 16
Round Hole Wiring Duct
Type D Part Numbers & Sizes ....................................... 18
Adhesive Backed Wiring Duct
Factory Applied Adhesive Backed Duct......................... 22
Adhesive Tape (in rolls) ................................................. 22
PANDUCT ® Accessories
Solid and New Slotted Divider Wall ............................... 24
New Wire Retainers ...................................................... 25
Duct and Corner Joining Strips ..................................... 26
Mounting Brackets......................................................... 27
Labeling......................................................................... 28
PANDUCT ® Installation Tools
Duct Cutting Tool ........................................................... 23
Duct Finger Notching Tool ............................................. 23
Nylon Rivet Installation Tool........................................... 23
Technical Data
Dimensional & Wirefill Information............................ 29-33
Material Physical Properties..................................... 34-35
Color Selection Chart .................................................... 36
Alphabetical Part Number Index............................... 37-38
Type MC Metric Wiring Duct also available, ask for SA117N220-LP
1
G
DUCT P.4
PANDUCT
WIRING DUCT AND ACCESSORIES
Extra Wide
Fingers
IN 34 SIZES
Puts Remote
Cabling Possibilities
Within Reach
More colors, styles, sizes,
and materials to choose from.
REGULAR PANEL
APPLICATIONS
Time saving features lower
your installed cost.
Narrow
Fingers
IN 29 SIZES
Comprehensive line of
accessories for custom
cabling applications.
F
DUCT P.6
Solid Wall
IN 34 SIZES
For the control panel,
communication closet, and
other controlled environments.
FS
RACEWAY P.8
EXTREME
TEMPERATURE
APPLICATIONS
Rated for continuous use in
temperatures from Ò 40° C
(Ò 40° F) to 125° C (257° F).
NE
PE
DUCT P.10
DUCT P.14
HALOGEN FREE
APPLICATIONS
Made of chlorine-free
material for low halogen,
low smoke requirements.
Slotted or
Solid Wall
IN 30 SIZES
Slotted or
Solid Wall
IN 7 SIZES
PS
NS
NETWORK SYSTEMS GROUP
RACEWAY P.12
RACEWAY P.16
G
DUCT P.4
PANDUCT
WIRING DUCT AND ACCESSORIES
Extra Wide
Fingers
IN 34 SIZES
Puts Remote
Cabling Possibilities
Within Reach
More colors, styles, sizes,
and materials to choose from.
REGULAR PANEL
APPLICATIONS
Time saving features lower
your installed cost.
Narrow
Fingers
IN 29 SIZES
Comprehensive line of
accessories for custom
cabling applications.
F
DUCT P.6
Solid Wall
IN 34 SIZES
For the control panel,
communication closet, and
other controlled environments.
FS
RACEWAY P.8
EXTREME
TEMPERATURE
APPLICATIONS
Rated for continuous use in
temperatures from Ò 40° C
(Ò 40° F) to 125° C (257° F).
NE
PE
DUCT P.10
DUCT P.14
HALOGEN FREE
APPLICATIONS
Made of chlorine-free
material for low halogen,
low smoke requirements.
Slotted or
Solid Wall
IN 30 SIZES
Slotted or
Solid Wall
IN 7 SIZES
PS
NS
NETWORK SYSTEMS GROUP
RACEWAY P.12
RACEWAY P.16
PANDUCT ® Type G — Slotted Wall Wiring Duct
Type G Slotted Wall Wiring Duct
Made of rigid PVC (See pg. 34 for material specifications)
Rated for continuous use temperatures up to 50°C (122°F)
U.L. Flammability Rating: V-0
Available in a variety of colors as a standard part†
Provided with standard mounting holes (dimensions see pg. 29)
Available without mounting holes (See ordering information
below)
• Available with adhesive backing* (See page 22 for details)
•
•
•
•
•
•
Duct External
Dimensions
Duct Part
Number
WxH IN.
Type G— Wiring Duct
Standard Colors†:
LG
DG
Light Gray
Dark Gray
BL
Black
WH
✔
✔
✔
✔
White
IB
IntrinsicBlue
Colors shown are approximate.
✔
✔
Ordering Information:
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order duct without mounting
holes, add NM to Par t Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• Par t Number shown for Light Gray
LG. To order other colors, substitute WH for White, DG for Dark
Gray, BL for Black, and IB for
Intrinsic Blue
†See page 36 to determine which
sizes are available in each color
4
✔
Cover Part
Number
WxH (mm)
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Std.
Lgth
G.5X.5LG6
G.5X1LG6
0.69 x .56
0.69 x 1.09
(17.5) x (14.2)
(17.5) x (27.1)
C.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
G.75X.75LG6
G.75X1LG6
G.75X1.5LG6
G.75X2LG6
0.94
0.94
0.94
0.94
x 0.83
x 1.09
x 1.58
x 2.09
(23.9)
(23.9)
(23.9)
(23.9)
x (21.0)
x (27.1)
x (40.0)
x (53.0)
C.75LG6
120
120
120
120
ft.
ft.
ft.
ft.
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
G1X1LG6
G1X1.5LG6
G1X2LG6
G1X3LG6
G1X4LG6
1.25
1.25
1.25
1.25
1.25
x 1.09
x 1.59
x 2.09
x 3.10
x 4.10
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
x (27.1)
x (40.3)
x (53.0)
x (78.6)
x (104.0)
C1LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
G1.5X1 LG6
G1.5X1.5LG6
G1.5X2LG6
G1.5X3LG6
G1.5X4LG6
1.75
1.75
1.75
1.75
1.75
x 1.09
x 1.59
x 2.09
x 3.10
x 4.10
(44.5)
(44.5)
(44.5)
(44.5)
(44.5)
x (27.1)
x (40.3)
x (53.0)
x (78.6)
x (104.0)
C1.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
G2X1 LG6
G2X1.5LG6
G2X2LG6
G2X3LG6
G2X4LG6
G2X5LG6
2.25
2.25
2.25
2.25
2.25
2.25
x 1.09
x 1.59
x 2.09
x 3.10
x 4.10
x 5.11
(57.2)
(57.2)
(57.2)
(57.2)
(57.2)
(57.2)
x (27.1)
x (40.3)
x (53.0)
x (78.6)
x (104.0)
x (129.7)
C2LG6
120 ft.
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
ft.
6 ft.
G2.5X3LG6
2.75 x 3.12
(69.9) x (79.2)
G3X1LG6
G3X2LG6
G3X3LG6
G3X4LG6
G3X5LG6
3.25
3.25
3.25
3.25
3.25
x 1.09
x 2.09
x 3.10
x 4.10
x 5.11
(82.6)
(82.6)
(82.6)
(82.6)
(82.6)
G4X1.5LG6
G4X2LG6
G4X3LG6
G4X4LG6
G4X5LG6
4.25
4.25
4.25
4.25
4.25
x 1.58
x 2.09
x 3.10
x 4.10
x 5.11
(108.0)
(108.0)
(108.0)
(108.0)
(108.0)
G6X4LG6
6.25 x 4.11
C2.5LG6
120 ft.
6 ft.
C3LG6
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
x (40.0)
x (53.0)
x (78.6)
x (104.0)
x (129.7)
C4LG6
60
60
60
60
60
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
(158.8) x (104.4)
C6LG6
60 ft.
120 ft.
6 ft.
x (27.6)
x (53.0)
x (78.6)
x (104.0)
x (129.7)
60 ft.
ft.
ft.
ft.
ft.
ft.
*Adhesive tape is not CSA Certified. See page 29 for complete listing of dimensions. ✔=New Sizes
Part Number Nomenclature —
G
.5
type/style
nominal
width (in)
X
.5
nominal
height (in)
LG
color
For Technical Assistance, call: 888-506-5400, Ext. 8287
6
length (ft)
Non-Slip Cover
Exclusive Rounded
Edges
Restricted Slot
Flush
Sidewall
Extra Wide Fingers
Double Scoreline
Type G Slotted Wall
Wiring Duct
Choose from 34 sizes of Panduit
Type G Wiring Duct; from 0.5" x 0.5"
up to 6" x 4". Used for general purpose control panel wiring and to route
and protect wiring in communication
closets. The non-slip cover conceals
all wiring and is easy to install. The
duct and cover form a flush sidewall
providing increased capacity and improved aesthetics.
Features & Benefits
Wide Fingers
Easy Cover Removal
• Provide added support
• Same slot and finger width as
Type E duct
• Changes to wiring can be made
quickly & easily
Flush Cover with Base
• Upper Scoreline:
• Improves aesthetics
• Provides greater wire capacity
Restricted Slot Design
• Retains wire in slot
• Speeds installation
—Simply deflect finger for fast,
easy wire installation or removal
Optional Divider Walls
Accessories
Duct Cutting Tool ..............................23
Duct Finger Notching Tool ...............23
Nylon Rivet Installation Tool ............23
Divider Walls......................................24
Wire Retainers...................................25
Optional Mounting Clip.....................27
Labeling .............................................28
• Can create multiple channels
within one duct to separate
wiring
Exclusive Rounded Edges
Along Entire Slot
• Protect wires and hands from
abrasion
Double Scorelines
—Fingers break off leaving a
smooth edge, without the use of
a tool
• Lower Scoreline:
—Fingers and sidewall break off
flush with base for junctions.
(Use DNT-100 Tool to cut side
wall)
Bar Coded Part Number
Label with QC Number
• Allows for automated inventory
control systems
• Quick identification of loose
piece wiring duct
• Complete Quality Traceability
Optional Pressure-Sensitive
Adhesive Mounting Tape
Non-Slip Cover Design
• Incorporates integral high friction lining to inhibit cover movement
5
PANDUCT ® Type F — Slotted Wall Wiring Duct
Type F Slotted Wall Wiring Duct
Made of rigid PVC (See pg. 34 for material specifications)
Rated for continuous use temperatures up to 50°C (122°F)
U.L. Flammability Rating: V-0
Available in a Light Gray and White color†
Provided with standard mounting holes (dimensions see pg. 30 )
Available without mounting holes (See ordering information
below)
• Available with adhesive backing* (See page 22 for details)
•
•
•
•
•
•
Duct External
Dimensions
Duct Part
Number
WxH IN.
Light Gray
(17.5) x (14.2)
(17.5) x (27.1)
C.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
F.75X.75LG6
F.75X1.5LG6
0.94 x 0.83
0.94 x 1.58
(23.9) x (21.0)
(23.9) x (40.0)
C.75LG6
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
1.25
1.25
1.25
1.25
1.25
x 1.09
x 1.59
x 2.09
x 3.10
x 4.10
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
x (27.1)
x (40.3)
x (53.0)
x (78.6)
x (104.0)
C1LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
✔
F1X1LG6
F1X1.5LG6
F1X2LG6
F1X3LG6
F1X4LG6
1.75
1.75
1.75
1.75
1.75
x 1.09
x 1.59
x 2.09
x 3.10
x 4.10
(44.5)
(44.5)
(44.5)
(44.5)
(44.5)
x (27.1)
x (40.3)
x (53.0)
x (78.6)
x (104.0)
C1.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
✔
F1.5X1 LG6
F1.5X1.5LG6
F1.5X2LG6
F1.5X3LG6
F1.5X4LG6
2.25
2.25
2.25
2.25
2.25
2.25
x 1.09
x 1.59
x 2.09
x 3.10
x 4.10
x 5.11
(57.2)
(57.2)
(57.2)
(57.2)
(57.2)
(57.2)
x (27.1)
x (40.3)
x (53.0)
x (78.6)
x (104.0)
x (129.7)
C2LG6
120 ft.
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
ft.
6 ft.
✔
✔
F2X1 LG6
F2X1.5LG6
F2X2LG6
F2X3LG6
F2X4LG6
F2X5LG6
✔
✔
F3X1LG6
F3X2LG6
F3X3LG6
F3X4LG6
F3X5LG6
3.25
3.25
3.25
3.25
3.25
x 1.09
x 2.09
x 3.10
x 4.10
x 5.11
(82.6)
(82.6)
(82.6)
(82.6)
(82.6)
x (27.6)
x (53.0)
x (78.6)
x (104.1)
x (129.8)
C3LG6
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
✔
✔
F4X2LG6
F4X3LG6
F4X4LG6
F4X5LG6
4.25
4.25
4.25
4.25
x 2.09
x 3.10
x 4.10
x 5.11
(108.0)
(108.0)
(108.0)
(108.0)
C4LG6
60
60
60
60
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
White
Colors shown are approximate.
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order duct without mounting
holes, add NM to Par t Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• Par t Number shown for Light Gray
LG. To order other colors, substitute WH White, DG Dark Gray, BL
Black, and IB Intrinsic Blue
†See page 36 to determine which
sizes are available in each color
6
Std.
Lgth
0.69 x 0.56
0.69 x 1.09
WH
Ordering Information:
WxH (mm)
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
F.5X.5LG6
F.5X1LG6
Type F— Wiring Duct
Standard Colors†:
LG
Cover Part
Number
*Adhesive tape is not CSA Certified.
See page 30 for complete listing of dimensions.
x (53.0)
x (78.6)
x (104.1)
x (129.8)
ft.
ft.
ft.
ft.
✔=New Sizes
Part Number Nomenclature —
F
.5
type/style
nominal
width (in)
X
.5
nominal
height (in)
LG
6
color
length (ft)
For Technical Assistance, call: 888-506-5400, Ext. 8287
Double Restricted
Slot
Non-Slip
Cover
Flush
Sidewall
Narrow Fingers
Exclusive Rounded
Edges
Double Scoreline
Type F Slotted Wall
Wiring Duct
Choose from 29 sizes of Panduit
Type F Wiring Duct; from .5" x .5" up
to 4" x 5". Used for general purpose
control panel wiring and to route and
protect wiring in communication closets. Ideal for use with high density
terminal blocks. The non-slip cover
conceals all wiring and is easy to install. The duct and cover form a flush
sidewall providing increased capacity
and improved aesthetics.
Accessories
Duct Cutting Tool ..............................23
Duct Finger Notching Tool ...............23
Nylon Rivet Installation Tool ............23
Divider Walls......................................24
Wire Retainers...................................25
Optional Mounting Clip.....................27
Labeling .............................................28
Features & Benefits
Narrow Fingers
Non-Slip Cover Design
• Less “fanning” of wires for a
neater appearance
• Provides the proper spacing for
use with high density terminal
blocks
• Incorporates integral high friction lining to inhibit cover movement
Restricted Slot Design
• Retains wire in slot
• Speeds installation
• Simply deflect finger for fast,
easy wire installation or
removal
Double Restricted Slot On
Larger Sizes
• Retains wires in top or bottom
slot
• Speeds installation
Flush Cover with Base
• Improves aesthetics
• Provides greater wire capacity
Optional Divider Wall
• Can create multiple channels
within one duct to separate
wiring
Exclusive Rounded Edges
Along Entire Slot
Easy Cover Removal
• Changes to wiring can be made
quickly & easily
Double Scorelines
• Upper Scoreline:
—Fingers break off leaving a
smooth edge, without the use of
a tool
• Lower Scoreline:
—Fingers and sidewall break off
flush with base for junctions.
(Use DNT-100 Tool to cut side
wall)
Bar Coded Part Number
Label with QC Number
• Allows for automated inventory
control systems
• Quick identification of loose
piece duct
• Complete Quality Traceability
Optional Pressure-Sensitive
Adhesive Mounting Tape
• Protect wires and hands from
abrasion
7
PANDUCT ® Type FS — Solid Wall Raceway
Type FS Solid Wall Raceway
•
•
•
•
•
•
•
Made of rigid PVC (See pg. 34 for material specifications)
Rated for continuous use temperatures up to 50°C (122°F)
U.L. Flammability Rating: V-0
Available in a variety of colors as a standard part†
Supplied without mounting holes
Available with mounting holes (See ordering information below)
Available with adhesive backing* (See page 22 for details)
Raceway External
Dimensions
Raceway Part
Number
WxH IN.
Type FS— Wiring Duct
Standard Colors†:
LG
DG
Light Gray
Dark Gray
BL
Black
WH
✔
✔
White
IB
IntrinsicBlue
Colors shown are approximate.
✔
Ordering Information:
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order duct with mounting holes,
delete NM from Part Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• Par t Number shown for Light Gray
LG. To order other colors, substitute WH for White, DG for Dark
Gray, BL for Black, and IB for
Intrinsic Blue
†See page 36 to determine which
sizes are available in each color
8
✔
Cover Part
Number
WxH (mm)
FS.5X.5LG6NM
FS.5X1LG6NM
0.69 x 0.56
0.69 x 1.09
(17.5) x(14.2)
(17.5) x (27.1)
FS.75X.75LG6NM
FS.75X1LG6NM
FS.75X1.5LG6NM
FS.75X2LG6NM
0.94
0.94
0.94
0.94
x 0.83
x 1.09
x 1.58
x 2.09
(23.9)
(23.9)
(23.9)
(23.9)
x (21.0)
x (27.1)
x (40.0)
x (53.0)
FS1X1LG6NM
FS1X1.5LG6NM
FS1X2LG6NM
FS1X3LG6NM
FS1X4LG6NM
1.25
1.25
1.25
1.25
1.25
x 1.09
x 1.59
x 2.09
x 3.10
x 4.10
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
x (27.1)
x (40.3)
x (53.0)
x (78.6)
x (104.0)
FS1.5X1 LG6NM
FS1.5X1.5LG6NM
FS1.5X2LG6NM
FS1.5X3LG6NM
FS1.5X4LG6NM
1.75
1.75
1.75
1.75
1.75
x 1.09
x 1.59
x 2.09
x 3.10
x 4.10
(44.5)
(44.5)
(44.5)
(44.5)
(44.5)
x (27.1)
x (40.3)
x (53.0)
x (78.6)
x (104.0)
FS2X1 LG6NM
FS2X1.5LG6NM
FS2X2LG6NM
FS2X3LG6NM
FS2X4LG6NM
FS2X5LG6NM
2.25
2.25
2.25
2.25
2.25
2.25
x 1.09
x 1.59
x 2.09
x 3.10
x 4.10
x 5.11
(57.2)
(57.2)
(57.2)
(57.2)
(57.2)
(57.2)
x (27.1)
x (40.3)
x (53.0)
x (78.6)
x (104.0)
x (129.7)
FS2.5X3LG6NM
2.75 x 3.12
(69.9) x (79.2)
FS3X1LG6NM
FS3X2LG6NM
FS3X3LG6NM
FS3X4LG6NM
FS3X5LG6NM
3.25
3.25
3.25
3.25
3.25
x 1.09
x 2.09
x 3.10
x 4.10
x 5.11
(82.6)
(82.6)
(82.6)
(82.6)
(82.6)
FS4X1.5LG6NM
FS4X2LG6NM
FS4X3LG6NM
FS4X4LG6NM
FS4X5LG6NM
4.25
4.25
4.25
4.25
4.25
x 1.58
x 2.09
x 3.10
x 4.10
x 5.11
(108.0)
(108.0)
(108.0)
(108.0)
(108.0)
FS6X4LG6NM
6.25 x 4.11
Raceway Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Std.
Lgth
C.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
C.75LG6
120
120
120
120
ft.
ft.
ft.
ft.
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
C1LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
C1.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
C2LG6
120 ft.
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
ft.
6 ft.
C2.5LG6
120 ft.
6 ft.
C3LG6
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
x (40.0)
x (53.0)
x (78.6)
x (104.0)
x (129.7)
C4LG6
60
60
60
60
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
(158.8) x (104.4)
C6LG6
120 ft.
6 ft.
x (27.6)
x (53.0)
x (78.6)
x (104.0)
x (129.7)
60 ft.
ft.
ft.
ft.
ft.
60 ft.
*Adhesive tape is not CSA Certified. See page 30 for complete listing of dimensions.
✔=New Sizes
Part Number Nomenclature —
FS
.5
X
type/style
nominal
width (in)
.5
nominal
height (in)
LG
6
color
length (ft)
For Technical Assistance, call: 888-506-5400, Ext. 8287
NM
no mounting
holes
Non-Slip
Cover
Solid Wall Design
Flush
Sidewall
Optional Divider
Wall
Cuts easily with
DCT Tool
Scoreline at Base
Type FS Solid Wall
Raceway
Choose from 34 sizes of Panduit Type
FS Solid Wall Raceway from .5"x.5' up
to 6"x4". The PVC material can be easily cut for breakouts and junctions. The
non-slip cover keeps all wiring in place
and is easy to install. The cover and
base form a flush sidewall for increased
capacity and improved aesthetics. It is
excellent for use in non-plenum applications including under floor and telecommunication closet installations.
Accessories
Duct Cutting Tool ..............................23
Duct Finger Notching Tool ...............23
Nylon Rivet Installation Tool ............23
Divider Walls......................................24
Wire Retainers...................................25
Optional Mounting Clip.....................27
Labeling .............................................28
Features & Benefits
Solid Walls
• Provide maximum wire
protection
Flush Cover With Base
• Improves aesthetics
Larger Internal Area
• Provides greater wire capacity
Non-Slip Cover Design
Bar Coded Part Number
Label with QC Number
• Allows for automated inventory
control systems
• Quick identification of loose
piece duct
• Complete Quality Traceability
Optional Pressure-Sensitive
Adhesive Mounting Tape
• Incorporates integral high
friction lining to inhibit cover
movement
Optional Divider Wall
• Can create multiple channels
within one duct to separate
wiring
Easy Cover Installation and
Removal
• Changes to wiring can be made
quickly & easily
Scoreline at Base of Wall
• Allows for a breakout which is
flush with base of the duct
Optional Mounting Holes
• Has same mounting hole pattern as Type F Duct
9
PANDUCT ® Type NE — Halogen Free Slotted Wall Wiring Duct
Type NE — Halogen Free Slotted
Wall Wiring Duct
• Made of Halogen free material (See page 34 for
material specifications)
• Rated for continuous use temperatures -40°C (-40°F) up to
95°C (203°F)
• Available in Light Gray and White color†
• Provided with standard mounting holes (dimensions see pg. 31)
• Available without mounting holes (See ordering info below)
• Available with adhesive backing* (See page 22 for details)
Duct Ext.ernal
Dimensions
Duct Part
Number
WxH IN.
>
Type NE— Wiring Duct
Standard Colors†:
LG
Light Gray
WH
White
Colors shown are approximate.
>
>
Ordering Information:
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order duct without mounting
holes, add NM to Par t Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• Par t Number shown for Light Gray
LG. To order other color, substitute WH White
WxH (mm)
NE.5X.5WH6
NE.5X.62LG6
NE.5X1LG6
NE.5X1.25LG6
NE.5X1.75LG6
0.63
0.63
0.63
0.63
0.63
x 0.56
x 0.68
x 1.06
x 1.31
x 1.81
(16.0)
(16.0)
(16.0)
(16.0)
(16.0)
x (14.2)
x (17.3)
x (26.9)
x (33.3)
x (46.0)
NE1X1LG6
NE1X1.5LG6
NE1X2LG6
NE1X3LG6
NE1X4LG6
1.14
1.14
1.14
1.14
1.14
x 1.12
x 1.62
x 2.12
x 3.12
x 4.12
(29.0)
(29.0)
(29.0)
(29.0)
(29.0)
x (28.4)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
NE1.5X1WH6
NE1.5X1.5LG6
NE1.5X2LG6
NE1.5X3LG6
NE1.5X4LG6
1.64
1.64
1.64
1.64
1.64
x 1.12
x 1.62
x 2.12
x 3.12
x 4.12
(41.7)
(41.7)
(41.7)
(41.7)
(41.7)
x (28.4)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
NE2X1LG6
NE2X1.5WH6
NE2X2LG6
NE2X3LG6
NE2X4LG6
2.14
2.14
2.14
2.14
2.14
x 1.12
x 1.62
x 2.12
x 3.12
x 4.12
(54.4)
(54.4)
(54.4)
(54.4)
(54.4)
x (28.4)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
NE2.5X3LG6
2.64 x 3.12
(67.1) x (79.2)
NE3X1LG6
NE3X2LG6
NE3X3LG6
NE3X4LG6
NE3X5LG6
3.14
3.14
3.14
3.14
3.14
x 1.12
x 2.12
x 3.12
x 4.12
x 5.12
(79.8)
(79.8)
(79.8)
(79.8)
(79.8)
NE4X2LG6
NE4X3LG6
NE4X4LG6
NE4X5LG6
4.14
4.14
4.14
4.14
x 2.12
x 3.12
x 4.12
x 5.12
(105.2)
(105.2)
(105.2)
(105.2)
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
NC.5LG6
ft.
ft.
ft.
ft.
ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
NC1LG6
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
NC1.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
NC2LG6
120 ft.
120 ft.
120 ft.
60 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
120 ft.
6 ft.
NC3LG6
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
NC4LG6
60
60
60
60
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
NC2.5LG6
x (28.4)
x (53.8)
x (79.2)
x (104.6)
x (130.0)
x (53.8)
x (79.2)
x (104.6)
x (130.0)
60 ft.
ft.
ft.
ft.
ft.
Part Number Nomenclature —
NE
type/style
.5
nominal
width (in)
X
Std.
Lgth
120
120
120
120
120
NOTE: Avoid the use of screw tap and set fluids around “halogen free” material. These agents may cause
material to become brittle.
*Adhesive tape is not CSA Certified.
>Available as a standard part in WH color only.
See page 31 for complete listing of dimensions.
†See page 36 to determine which
sizes are available in each color
10
Cover Part
Number
.62
LG
6
nominal
height (in)
color
length (ft)
For Technical Assistance, call: 888-506-5400, Ext. 8287
Non-Slip Cover
Halogen Free Material
Exclusive Rounded
Edges
Restricted Slot
Wide Fingers
Scoreline at Base
Type NE Slotted Wall
Wiring Duct
Choose from 30 sizes of Panduit
Type NE Halogen Free Slotted Wall
Wiring Duct from .5"x.5" up to
4"x5". The Halogen free material allows the duct to be used in higher
temperature environments, to 95°C
(203°F), and low temperature environments, to -40°C (-40°F). The nonslip cover keeps all wiring in place
and is easy to install. The material
can be easily cut for breakouts and
junctions using the DCT and DNT
tools.
Accessories
Duct Cutting Tool ..............................23
Duct Finger Notching Tool ...............23
Nylon Rivet Installation Tool ............23
Wire Retainers...................................25
Optional Mounting Clip.....................27
Labeling .............................................28
Features & Benefits
Halogen Free Material
Easy Cover Removal
• Made of chlorine-free material
for low halogen requirements
• Changes to wiring can be made
quickly & easily
Increased Temperature
Resistance
Bar Coded Part Number
Label with QC Number
• Rated for temperatures from
-40°C (-40°F) up to 95°C
(203°F)
• Allows for automated inventory
control systems
• Quick identification of loose
piece duct
• Complete Quality Traceability
Restricted Slot Design
• Retains wire in slot
• Speeds installation
• Simply deflect finger for fast,
easy wire installation or
removal
Optional Pressure-Sensitive
Adhesive Mounting Tape
Exclusive Rounded Edges
Along Entire Slot
• Protect wires and hands from
abrasion
Non-Slip Cover Design
• Incorporates integral high friction lining to inhibit cover
movement
11
PANDUCT ® Type NS — Halogen Free Solid Wall Raceway
Type NS—Halogen Free Solid Wall
Raceway
• Made of Halogen free material (See page 34 for
material specifications)
• Rated for continuous use temperatures -40°C (-40°F) up to
95°C (203°F)
• Available in Light Gray and White color†
• Provided without standard mounting holes (dims see pg. 31)
• Available with mounting holes (See ordering info below)
• Available with adhesive backing* (See page 22 for details)
Raceway External
Dimensions
Raceway Part
Number
WxH IN.
>
Type NS— Raceway
Standard Colors†:
LG
Light Gray
WH
White
Colors shown are approximate.
>
>
Ordering Information:
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order duct with mounting
holes, delete NM to Part Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• art Number shown for Light Gray
LG. To order other color, substitute WH White
WxH (mm)
NS.5X.5WH6NM
NS.5X.62LG6NM
NS.5X1LG6NM
NS.5X1.25LG6NM
NS.5X1.75LG6NM
0.63
0.63
0.63
0.63
0.63
x 0.56
x 0.68
x 1.06
x 1.31
x 1.81
(16.0)
(16.0)
(16.0)
(16.0)
(16.0)
x (14.2)
x (17.3)
x (26.9)
x (33.3)
x (46.0)
NS1X1LG6NM
NS1X1.5LG6NM
NS1X2LG6NM
NS1X3LG6NM
NS1X4LG6NM
1.14
1.14
1.14
1.14
1.14
x 1.12
x 1.62
x 2.12
x 3.12
x 4.12
(29.0)
(29.0)
(29.0)
(29.0)
(29.0)
x (28.4)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
NS1.5X1WH6NM
NS1.5X1.5LG6NM
NS1.5X2LG6NM
NS1.5X3LG6NM
NS1.5X4LG6NM
1.64
1.64
1.64
1.64
1.64
x 1.12
x 1.62
x 2.12
x 3.12
x 4.12
(41.7)
(41.7)
(41.7)
(41.7)
(41.7)
x (28.4)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
NS2X1LG6NM
NS2X1.5WH6NM
NS2X2LG6NM
NS2X3LG6NM
NS2X4LG6NM
2.14
2.14
2.14
2.14
2.14
x 1.12
x 1.62
x 2.12
x 3.12
x 4.12
(54.4)
(54.4)
(54.4)
(54.4)
(54.4)
x (28.4)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
NS2.5X3LG6NM
2.64 x 3.12
(67.1) x (79.2)
NS3X1LG6NM
NS3X2LG6NM
NS3X3LG6NM
NS3X4LG6NM
NS3X5LG6NM
3.14
3.14
3.14
3.14
3.14
x 1.12
x 2.12
x 3.12
x 4.12
x 5.12
(79.8)
(79.8)
(79.8)
(79.8)
(79.8)
NS4X2LG6NM
NS4X3LG6NM
NS4X4LG6NM
NS4X5LG6NM
4.14
4.14
4.14
4.14
x 2.12
x 3.12
x 4.12
x 5.12
(105.2)
(105.2)
(105.2)
(105.2)
x (28.4)
x (53.8)
x (79.2)
x (104.6)
x (130.0)
x (53.8)
x (79.2)
x (104.6)
x (130.0)
Raceway Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Std.
Lgth
NC.5LG6
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
NC1LG6
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
NC1.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
NC2LG6
120 ft.
120 ft.
120 ft.
60 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
120 ft.
6 ft.
NC3LG6
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
NC4LG6
60
60
60
60
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
NC2.5LG6
60 ft.
ft.
ft.
ft.
ft.
NOTE: Avoid the use of screw tap and set fluids around “halogen free” material. These agents may cause
material to become brittle.
*Adhesive tape is not CSA Certified.
>Available as a standard part in WH color only.
See page 31 for complete listing of dimensions.
Part Number Nomenclature —
NS
.5
type/style
nominal
width (in)
†See page 36 to determine which
sizes are available in each color
12
Cover Part
Number
X
.62
nominal
height (in)
LG
6
color
length (ft)
For Technical Assistance, call: 888-506-5400, Ext. 8287
NM
no mounting
holes
Halogen Free Material
Solid Wall Design
Non-Slip
Cover
Cuts easily with
DCT Tool
Scoreline at Base
Type NS Solid Wall
Raceway
Choose from 30 sizes of Panduit
Type NS Halogen Free Solid Wall
Raceway from .5"x.5" up to 4"x5".
The Halogen free material allows the
duct to be used in higher temperature
environments, to 95°C (203°F), and
low temperature environments, to
-40°C (-40°F). The non-slip cover
keeps all wiring in place and is easy
to install. The material can be easily
cut for breakouts and junctions using
the DCT and DNT tools.
Features & Benefits
Halogen Free Material
• Made of chlorine-free material
for low halogen, requirements
Increased Temperature
Resistance
• Rated for temperatures from
-40°C (-40°F) up to 95°C
(203°F)
Solid Walls
Bar Coded Part Number
Label with QC Number
• Allows for automated inventory
control systems
• Quick identification of loose
piece duct
• Complete Quality Traceability
Optional Pressure-Sensitive
Adhesive Mounting Tape
• Provide maximum wire
protection
Non-Slip Cover Design
• Incorporates integral high
friction lining to inhibit cover
movement
Accessories
Larger Internal Area
Duct Cutting Tool ..............................23
Duct Finger Notching Tool ...............23
Nylon Rivet Installation Tool ............23
Wire Retainers...................................25
Optional Mounting Clip.....................27
Labeling .............................................28
Easy Cover Installation and
Removal
• Provides greater wire capacity
• Changes to wiring can be made
quickly & easily
13
PANDUCT ® Type PE — Polycarbonate Slotted Wall Wiring Duct
Type PE—Polycarbonate Slotted Wall
Wiring Duct
• Made of Polycarbonate material—for low halogen, low smoke
applications (see page 34 for material specifications)
• Rated for continuous use temperatures up to 125°C (257°F)
• Available in clear only
• Provided with standard mounting holes (dims see pg. 31)
• Available without mounting holes (See ordering info below)
• Available with adhesive backing* (See page 22 for details)
Duct Part
Number
Duct Ext.ernal
Dimensions
WxH IN.
Type PE— Wiring Duct
Standard Colors†:
CL
Clear
>
>
Cover Part
Number
WxH (mm)
Std.
Ctn.
Qty.
Std.
Ctn.
Qty.
PE.75X1CL6
0.88 x 1.06
(22.4) x (26.9)
PC.75CL6
120 ft.
120 ft.
6 ft.
PE1X2CL6
1.14 x 2.12
(29.0) x (53.8)
PC1CL6
120 ft.
120 ft.
6 ft.
PE1X3CL6
1.14 x 3.12
(29.0) x (79.2)
PC1CL6
120 ft.
120 ft.
6 ft.
PE1.5X1.5CL6
1.64 x 1.62
(41.7) x (41.1)
PC1.5CL6
120 ft.
120 ft.
6 ft.
PE2X1.5CL6
PE2X2CL6
2.14 x 1.62
2.14 x 2.12
(54.4) x (41.1)
(54.4) x (53.8)
PC2CL6
120 ft.
120 ft.
6 ft.
PE3X1.25CL6
3.14 x 1.37
(79.8) x (34.8)
PC3CL6
120 ft.
120 ft.
6 ft.
PE4X4CL6
4.14 x 4.12
(105.2) x (104.6)
PC4CL6
60 ft.
120 ft.
6 ft.
Polycarbonate raceway is not UL Recognized or CSA Certified
>For availability contact factory.
*Adhesive tape is not CSA Certified.
See page 31 for complete listing of dimensions.
Ordering Information:
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order duct without mounting
holes, add NM to Par t Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• Par t Number shown for
CL Clear
Part Number Nomenclature —
PE
.75
X
1
CL
6
nominal
width (in)
color
length (ft)
†Available in Clear only
type/style
14
Std.
Lgth
nominal
height (in)
For Technical Assistance, call: 888-506-5400, Ext. 8287
Low Halogen, Low Smoke
Material
Restricted Slot
Exclusive Rounded
Edges
Wide Fingers
Cuts easily with
DCT Tool
Scoreline at Base
Type PE Polycarbonate
Slotted Wall Duct
Choose from 8 sizes of Panduit Type
PE Polycarbonate Slotted Wall Wiring Duct from .75"x1" up to 4"x4".
The low halogen, low smoke Polycarbonate material allows the duct to be
used in higher temperature environments, up to 125°C (257°F), and low
temperature environments, to -40°C
(-40°F). The material can be easily
cut for breakouts and junctions using
the DCT and DNT tools.
Accessories
Duct Cutting Tool ..............................23
Duct Finger Notching Tool ...............23
Nylon Rivet Installation Tool ............23
Divider Walls......................................24
Wire Retainers...................................25
Optional Mounting Clip.....................27
Labeling .............................................28
Features & Benefits
Low Halogen, Low Smoke
Material
Bar Coded Part Number
Label with QC Number
• Made from low halogen, low
smoke Polycarbonate material
• Allows for automated inventory
control systems
• Quick identification of loose
piece duct
• Complete Quality Traceability
Increased Temperature
Resistance
• Rated for temperatures from
-40°C (-40°F) up to 125°C
(257°F)
Optional Pressure-Sensitive
Adhesive Mounting Tape
Restricted Slot Design
• Retains wire in slot
• Speeds installation
• Simply deflect finger for fast,
easy wire installation or
removal
Exclusive Rounded Edges
Along Entire Slot
• Protect wires and hands from
abrasion
Optional Divider Wall
• Can create multiple channels
within one duct to separate
wiring
Easy Cover Removal
• Changes to wiring can be made
quickly & easily
15
PANDUCT ® Type PS — Polycarbonate Solid Wall Raceway
Type PS—Polycarbonate Solid Wall
Raceway
• Made of Polycarbonate material—for low halogen, low smoke
applications (see page 34 for material specifications)
• Rated for continuous use temperatures up to 125°C (257°F)
• Available in clear only
• Provided with standard mounting holes (dims see pg. 31)
• Available without mounting holes (See ordering info below)
• Available with adhesive backing* (See page 22 for details)
Raceway Ext.ernal
Dimensions
Raceway Part
Number
WxH IN.
Type PS— Raceway
Standard Colors†:
CL
Clear
Cover Part
Number
WxH (mm)
Raceway Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Std.
Lgth
PS.75X1CL6NM
0.88 x 1.06
(22.4) x(26.9)
PC.75CL6
120 ft.
120 ft.
6 ft.
PS1.5X1.5CL6NM
1.64 x 1.62
(41.7) x(41.1)
PC1.5CL6
120 ft.
120 ft.
6 ft.
PS2X1.5CL6NM
PS2X2CL6NM
2.14 x 1.62
2.14 x 2.12
(54.4) x(41.1)
(54.4) x(53.8)
PC2CL6
120 ft.
120 ft.
6 ft.
PS3X1.25CL6NM
3.14 x 1.37
(79.8) x(34.8)
PC3CL6
120 ft.
120 ft.
6 ft.
PS4X4CL6NM
4.14 x 4.12
(105.2) x(104.6)
PC4CL6
60 ft.
120 ft.
6 ft.
Polycarbonate raceway is not UL Recognized or CSA Certified
*Adhesive tape is not CSA Certified.
See page 31 for complete listing of dimensions.
Ordering Information:
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order with mounting holes,
delete NM to Part Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• Par t Number shown for
CL Clear
Part Number Nomenclature —
PS
.75
type/style
nominal
width (in)
X
1
CL
6
color
length (ft)
NM
†Available in Clear only.
16
nominal
height (in)
For Technical Assistance, call: 888-506-5400, Ext. 8287
no mounting
holes
Low Halogen, Low Smoke
Material
Scoreline at Base
Type PS Polycarbonate
Solid Wall Raceway
Choose from 6 sizes of Panduit Type
PS Polycarbonate Solid Wall Raceway from .75"x1" up to 4"x4". The
low halogen, low smoke Polycarbonate material allows the raceway to be
used in higher temperature environments, up to 125°C (257°F), and low
temperature environments, to -40°C
(-40°F). The material can be easily
cut for breakouts and junctions using
the DCT and DNT tools.
Features & Benefits
Low Halogen, Low Smoke
Material
• Made from low halogen, low
smoke Polycarbonate material
Increased Temperature
Resistance
• Quick identification of loose
piece duct
• Complete Quality Traceability
Optional Pressure-Sensitive
Adhesive Mounting Tape
• Rated for temperatures up to
125°C (257°F)
Solid Walls
• Provide maximum wire
protection
Larger Internal Area
• Provides greater wire capacity
Accessories
Duct Cutting Tool ..............................23
Duct Finger Notching Tool ...............23
Nylon Rivet Installation Tool ............23
Divider Walls......................................24
Wire Retainers...................................25
Optional Mounting Clip.....................27
Labeling .............................................28
Optional Divider Wall
• Can create multiple channels
within one duct to separate
wiring
Easy Cover Installation and
Removal
• Changes to wiring can be made
quickly & easily
Bar Coded Part Number
Label with QC Number
• Allows for automated inventory
control systems
17
PANDUCT ® Type D — Round Hole Wiring Duct
Type D Round Hole Wiring Duct
Made of rigid PVC (See pg. 34 for material specifications)
Rated for continuous use temperatures up to 50°C (122°F)
U.L. Flammability Rating: V-0
Available in Light Gray (LG), White (WH) or Black (BL)
Provided with standard mounting holes (dimensions see pg. 31)
Available without mounting holes (See ordering information
below)
• Available with adhesive backing* (See page 22 for details)
•
•
•
•
•
•
Duct Ext.ernal
Dimensions
Duct Part
Number
WxH IN.
Type D— Wiring Duct
Standard Colors†:
LG
Light Gray
WH
White
BL
Black
Colors shown are approximate.
Cover Part
Number
WxH (mm)
D.75X.75LG6
D.75X1LG6
D.75X1.5LG6
0.88 x 0.81
0.88 x 1.06
0.88 x 1.56
(22.4) x (20.6)
(22.4) x (26.9)
(22.4) x (39.6)
D1X1LG6
D1X1.5LG6
D1X2LG6
D1X3LG6
D1X4LG6
1.14
1.14
1.14
1.14
1.14
x 1.12
x 1.62
x 2.12
x 3.12
x 4.12
(29.0)
(29.0)
(29.0)
(29.0)
(29.0)
D1.5X1.5LG6
D1.5X2LG6
D1.5X3LG6
D1.5X4LG6
1.64
1.64
1.64
1.64
x 1.62
x 2.12
x 3.12
x 4.12
D2X1 LG6
D2X2LG6
D2X3LG6
D2X4LG6
2.14
2.14
2.14
2.14
x 1.12
x 2.12
x 3.12
x 4.12
D2.5X3LG6
2.64 x 3.12
(67.1) x (79.2)
D3X1LG6
D3X1.25LG6
D3X2LG6
D3X3LG6
D3X4LG6
3.14
3.14
3.14
3.14
3.14
x 1.12
x 1.37
x 2.12
x 3.12
x 4.12
(79.8)
(79.8)
(79.8)
(79.8)
(79.8)
D4X1.5LG6
D4X2LG6
D4X3LG6
D4X4LG6
4.14
4.14
4.14
4.14
x 1.62
x 2.12
x 3.12
x 4.12
(105.2)
(105.2)
(105.2)
(105.2)
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
C.75LG6
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
x (28.4)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
C1LG6
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
(41.7)
(41.7)
(41.7)
(41.7)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
C1.5LG6
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
(54.4)
(54.4)
(54.4)
(54.4)
x (28.4)
x (53.8)
x (79.2)
x (104.6)
C2LG6
120 ft.
120 ft.
60 ft.
60 ft.
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
C2.5LG6
x (28.4)
x (34.8)
x (53.8)
x (79.2)
x (104.6)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
120 ft.
6 ft.
C3LG6
120 ft.
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
C4LG6
120 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
*Adhesive tape is not CSA Certified.
See page 31 for complete listing of dimensions.
Ordering Information:
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order duct without mounting
holes, add NM to Par t Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• Par t Number shown for Light Gray
LG. To order other colors, substitute WH White, and BL Black
†See page 36 to determine which
sizes are available in each color
18
Part Number Nomenclature —
D
type/style
.75
nominal
width (in)
Std.
Lgth
X
.75
nominal
height (in)
LG
color
For Technical Assistance, call: 888-506-5400, Ext. 8287
6
length (ft)
Optional Divider
Wall
Non-Slip Cover
Round Hole
Design
Variable Wire
Height
Scoreline at Base
Type D Round Hole
Wiring Duct
Choose from 26 sizes of Type D
Round Hole Wiring Duct from .75"
X.75" up to 4" X 4". The round holes
are designed to keep wires exiting
the duct at a certain height. The nonslip cover snaps onto the duct to conceal the wiring and improve the appearance of your control panel.
Features & Benefits
Round Hole Design
• Maintains wires at a certain
height
• Provides added support
Easy Cover Installation
and Removal
• Changes to wiring can be made
quickly & easily
Optional Divider Wall
Bar Coded Part Number
Label with QC Number
• Allows for automated inventory
control systems
• Quick identification of loose
piece duct
• Complete Quality Traceability
Optional Pressure-Sensitive
Adhesive Mounting Tape
• Can create multiple channels
within one duct to separate wiring
Smooth Rounded Edges
Accessories
• Protect wires and hands from
abrasion
Elongated Mounting Holes
Duct Cutting Tool ..............................23
Duct Finger Notching Tool ...............23
Nylon Rivet Installation Tool ............23
Divider Walls......................................24
Optional Mounting Clip.....................27
Labeling .............................................28
• Allows greater mounting
flexibility
Non-Slip Cover Design
• Incorporates integral high
friction lining to inhibit cover
movement
Scoreline at Base of Wall
• Allows for breakout which is
flush with base of duct
19
PANDUCT ® Type E — Slotted Wall Wiring Duct
Type E Slotted Wall Wiring Duct
• Made of rigid PVC (See pg. 34 for material specifications)
• Rated for continuous use temperatures up to 50°C (122°F)
• Available in a variety of colors as a standard part (See page 36
for details)
• Provided with standard mounting holes (dimensions page 31)
• Available without mounting holes (See ordering information
below)
• Available with adhesive backing* (See page 22 for details)
Duct External
Dimensions
Duct Part
Number
WxH IN.
Type E— Wiring Duct
Standard Colors†:
LG
DG
Light Gray
Dark Gray
BL
Black
WH
White
IB
IntrinsicBlue
Colors shown are approximate.
Ordering Information:
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order duct without mounting
holes, add NM to Par t Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• Par t Number shown for Light Gray
LG. To order other colors, substitute WH White, DG Dark Gray, BL
Black, and IB Intrinsic Blue
†See page 36 to determine which
sizes are available in each color
20
E.5X.5LG6
E.5X.62LG6
E.5X1LG6
E.5X1.25LG6
E.5X1.75LG6
E.5X2LG6
E.75X.75LG6
E.75X1LG6
E.75X1.5LG6
E.75X2LG6
E1X1LG6
E1X1.25LG6
E1X1.5LG6
E1X2LG6
E1X2.5LG6
E1X3LG6
E1X4LG6
E1.5X1 LG6
E1.5X1.5LG6
E1.5X2LG6
E1.5X3LG6
E1.5X4LG6
E2X1LG6
E2X1.5LG6
E2X2LG6
E2X2.5LG6
E2X3LG6
E2X4LG6
E2X5LG6
E2.5X3LG6
E3X1LG6
E3X1.25LG6
E3X2LG6
E3X3LG6
E3X4LG6
E3X5LG6
E4X1.5LG6
E4X2LG6
E4X3LG6
E4X4LG6
E4X5LG6
Cover Part
Number
WxH (mm)
0.63 x 0.56
0.63 x 0.68
0.63 x 1.06
0.63 x 1.31
0.63 x 1.81
0.63 x 2.06
(16.0)
(16.0)
(16.0)
(16.0)
(16.0)
(16.0)
x (14.2)
x (17.3)
x (26.9)
x (33.3)
x (46.0)
x (52.3)
0.88 x 0.81
0.88 x 1.06
0.88 x 1.56
0.88 x 2.12
(22.4)
(22.4)
(22.4)
(22.4)
x (20.6)
x (26.9)
x (39.6)
x (53.8)
1.14 x 1.12
1.14 x 1.37
1.14 x 1.62
1.14 x 2.12
1.14 x 2.62
1.14 x 3.12
1.14 x 4.12
(29.0)
(29.0)
(29.0)
(29.0)
(29.0)
(29.0)
(29.0)
x (28.4)
x (34.8)
x (41.1)
x (53.8)
x (66.5)
x (79.2)
x (104.6)
1.64 x 1.12
1.64 x 1.62
1.64 x 2.12
1.64 x 3.12
1.64 x 4.12
(41.7)
(41.7)
(41.7)
(41.7)
(41.7)
x (28.4)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
2.14 x 1.12
2.14 x 1.62
2.14 x 2.12
2.14 x 2.62
2.14 x 3.12
2.14 x 4.12
2.14 x 5.12
(54.4)
(54.4)
(54.4)
(54.4)
(54.4)
(54.4)
(54.4)
x (28.4)
x (41.1)
x (53.8)
x (66.5)
x (79.2)
x (104.6)
x (130.0)
2.64 x 3.12
(67.1) x (79.2)
3.14 x 1.12
3.14 x 1.37
3.14 x 2.12
3.14 x 3.12
3.14 x 4.12
3.14 x 5.12
(79.8)
(79.8)
(79.8)
(79.8)
(79.8)
(79.8)
4.14 x 1.62
4.14 x 2.12
4.14 x 3.12
4.14 x 4.12
4.14 x 5.12
(105.2)
(105.2)
(105.2)
(105.2)
(105.2)
Duct
Cover
Std.
Std. Ctn. Std. Ctn. Lgth
Qty.
Qty.
C.5LG6
120
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
ft.
120
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
ft.
6 ft.
C.75LG6
120
120
120
120
ft.
ft.
ft.
ft.
120
120
120
120
ft.
ft.
ft.
ft.
6 ft.
C1LG6
120
120
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
ft.
ft.
120
120
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
ft.
ft.
6 ft.
C1.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
C2LG6
120 ft.
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
ft.
ft.
6 ft.
C2.5LG6
x (28.4)
x (34.8)
x (53.8)
x (79.2)
x (104.6)
x (130.0)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
x (130.0)
120 ft.
6 ft.
C3LG6
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
ft.
6 ft.
C4LG6
120 ft.
60 ft.
60 ft.
60 ft.
60 ft.
120
120
120
120
120
ft.
ft.
ft.
ft.
ft.
6 ft.
See page 31 for complete listing of dimensions. *Adhesive tape is not CSA Certified.
Part Number Nomenclature —
E
.5
type/style
nominal
width (in)
X
.5
nominal
height (in)
LG
color
For Technical Assistance, call: 888-506-5400, Ext. 8287
6
length (ft)
PANDUCT ® Type S — Solid Wall Raceway
Type S Solid Wall Raceway
• Made of rigid PVC (See pg. 34 for material specifications)
• Rated for continuous use temperatures up to 50°C (122°F)
• Available in a variety of colors as a standard part (See page 36
for details)
• Provided with standard mounting holes (dimensions page 31)
• Available without mounting holes (See ordering information
below)
• Available with adhesive backing* (See page 22 for details)
Raceway External
Dimensions
Raceway Part
Number
WxH IN.
Type S— Raceway
Standard Colors†:
LG
DG
Light Gray
Dark Gray
BL
Black
WH
White
IB
IntrinsicBlue
Colors shown are approximate.
Ordering Information:
• Order number of feet required in
multiples of 6 ft or Std. Carton
quantities.
• To order duct with mounting holes,
delete NM from Part Number.
• To order with pressure-sensitive
adhesive mounting tape applied,
add -A to Part Number.
• Part Number shown for Light Gray
LG. To order other colors, substitute WH for White, DG for Dark
Gray, BL for Black, and IB for
Intrinsic Blue
†See page 36 to determine which
sizes are available in each color
S.5X.5LG6NM
S.5X.62LG6NM
S.5X1LG6NM
S.5X1.25LG6NM
S.5X1.75LG6NM
S.5X2LG6NM
S.75X.75LG6NM
S.75X1LG6NM
S.75X1.5LG6NM
S.75X2LG6NM
S1X1LG6NM
S1X1.25LG6NM
S1X1.5LG6NM
S1X2LG6NM
S1X2.5LG6NM
S1X3LG6NM
S1X4LG6NM
S1.5X1 LG6NM
S1.5X1.5LG6NM
S1.5X2LG6NM
S1.5X3LG6NM
S1.5X4LG6NM
S2X1LG6NM
S2X1.5LG6NM
S2X2LG6NM
S2X2.5LG6NM
S2X3LG6NM
S2X4LG6NM
S2X5LG6NM
S2.5X3LG6NM
S3X1LG6NM
S3X1.25LG6NM
S3X2LG6NM
S3X3LG6NM
S3X4LG6NM
S3X5LG6NM
S4X1.5LG6NM
S4X2LG6NM
S4X3LG6NM
S4X4LG6NM
S4X5LG6NM
WxH (mm)
0.63 x 0.56
0.63 x 0.68
0.63 x 1.06
0.63 x 1.31
0.63 x 1.81
0.63 x 2.06
(16.0)
(16.0)
(16.0)
(16.0)
(16.0)
(16.0)
x (14.2)
x (17.3)
x (26.9)
x (33.3)
x (46.0)
x (52.3)
0.88 x 0.81
0.88 x 1.06
0.88 x 1.56
0.88 x 2.12
(22.4)
(22.4)
(22.4)
(22.4)
x (20.6)
x (26.9)
x (39.6)
x (53.8)
1.14 x 1.12
1.14 x 1.37
1.14 x 1.62
1.14 x 2.12
1.14 x 2.62
1.14 x 3.12
1.14 x 4.12
(29.0)
(29.0)
(29.0)
(29.0)
(29.0)
(29.0)
(29.0)
x (28.4)
x (34.8)
x (41.1)
x (53.8)
x (66.5)
x (79.2)
x (104.6)
1.64 x 1.12
1.64 x 1.62
1.64 x 2.12
1.64 x 3.12
1.64 x 4.12
(41.7)
(41.7)
(41.7)
(41.7)
(41.7)
x (28.4)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
2.14 x 1.12
2.14 x 1.62
2.14 x 2.12
2.14 x 2.62
2.14 x 3.12
2.14 x 4.12
2.14 x 5.12
(54.4)
(54.4)
(54.4)
(54.4)
(54.4)
(54.4)
(54.4)
x (28.4)
x (41.1)
x (53.8)
x (66.5)
x (79.2)
x (104.6)
x (130.0)
2.64 x 3.12
(67.1) x (79.2)
3.14 x 1.12
3.14 x 1.37
3.14 x 2.12
3.14 x 3.12
3.14 x 4.12
3.14 x 5.12
(79.8)
(79.8)
(79.8)
(79.8)
(79.8)
(79.8)
4.14 x 1.62
4.14 x 2.12
4.14 x 3.12
4.14 x 4.12
4.14 x 5.12
(105.2)
(105.2)
(105.2)
(105.2)
(105.2)
x (28.4)
x (34.8)
x (53.8)
x (79.2)
x (104.6)
x (130.0)
x (41.1)
x (53.8)
x (79.2)
x (104.6)
x (130.0)
Cover
Cover Part Raceway
Ctn. Std. Ctn.
Number Std.
Qty.
Qty.
Std.
Lgth
C.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
C.75LG6
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
C1LG6
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
C1.5LG6
120 ft.
120 ft.
120 ft.
120 ft.
60 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
C2LG6
120 ft.
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
60 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
C2.5LG6
60 ft.
120 ft.
6 ft.
C3LG6
120 ft.
120 ft.
60 ft.
60 ft.
60 ft.
60 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
C4LG6
120 ft.
60 ft.
60 ft.
60 ft.
60 ft.
120 ft.
120 ft.
120 ft.
120 ft.
120 ft.
6 ft.
See page 31 for complete listing of dimensions. *Adhesive tape is not CSA Certified.
Part Number Nomenclature —
S
type/style
.5
nominal
width (in)
X
.5
nominal
height (in)
LG
6
color
length (ft)
NM
no mounting holes
21
PANDUCT ® Adhesive Backed Wiring Duct
Adhesive Backed Wiring Duct
For All Wiring Duct Types and Sizes
Adhesive backing is an available option for all types and
sizes of PANDUIT Wiring Duct and Raceway. The adhesive backing is factory applied and ready for use. Simply
peel off the tape's protective liner and mount the duct to
a clean, dry, grease-free surface.
Features & Benefits
As a PERMANENT MOUNTING
METHOD
Eliminates the drilling and tapping of
holes, labor and time required to
install separate mounting devices.
As a TEMPORARY MOUNTING
METHOD
Holds duct in place to free installer's
hands to further secure duct with
screws, rivets, etc.
Factory Applied Tape —
To order any Panduit Wiring Duct or Raceway with pressure-sensitive
adhesive mounting tape factory applied add -A to the Duct/Raceway part
G
2
22
factory applied
length (ft) adhesive tape
color
TAPE
ROWS OF
TAPE
WIDTH
In.
(mm)
THICKNESS
In.
(mm)
1
.50
(12.7)
.0313
(.8)
2
.50
(12.7)
.0313
(.8)
3X4 thru 3X5
2
.75
(19.1)
.0313
(.8)
4X1.5 thru 4X3
2
.50
(12.7)
.0313
(.8)
4X4 thru 6X4
2
.75
(19.1)
.0313
(.8)
To Order Tape Separately:
3X4 thru 3X5
4X1.5 thru 4X3
To Order Tape Separately:
• Order number of rolls required
-A
2X1 thru 3X3
2X1 thru 3X3
• Add -A to the Duct or Raceway
Part Number
nominal
height (in)
6
.5X.5 thru 1.5X4
.5X.5 thru 1.5X4
For Factory Applied Tape:
LG
Material Specifications Table for Factory Applied Tape:
DUCT SIZE
WxH
Ordering Information:
1
nominal
type/style width (in)
DUCT SIZE
WxH
• Recommended installation temperature is 70°F (21°C)
• UL Recognized service temperature is
32°F (0°C) to 140°F (60°C)
• Optimum recommended dwell time for
acrylic adhesive is 8 hours
• Recommended tape load is
1/2 lb. per square inch of tape area
X
4X4 thru 6X4
TAPE PART
NUMBER
ROLL
LENGTH
STD
PKG
QTY
STD
CTN
QTY
100 Rolls
P32W2A2-50-7
Yds.
7.0
(m)
(6.4)
1 Roll
P32W2A2-50-72
72.0
(65.5)
1 Roll
9 Rolls
P32W2A2-50-7
7.0
(6.4)
1 Roll
100 Rolls
P32W2A2-50-72
72.0
(65.5)
1 Roll
9 Rolls
P32W2A2-75-7
7.0
(6.4)
1 Roll
60 Rolls
P32W2A2-75-72
72.0
(65.5)
1 Roll
7 Rolls
P32W2A2-50-7
7.0
(6.4)
1 Roll
100 Rolls
P32W2A2-50-72
72.0
(65.5)
1 Roll
9 Rolls
P32W2A2-75-7
7.0
(6.4)
1 Roll
60 Rolls
P32W2A2-75-72
72.0
(65.5)
1 Roll
7 Rolls
For Technical Assistance, call: 888-506-5400, Ext. 8287
PANDUCT ® Installation Tools
Part Number
Std
Pkg Qty.
Description
PANDUCT ® Cutting Tool (For use with all duct/raceway types)
Heavy duty steel tool incorporates a new, improved blade design which minimizes cutting force and
blade wear. Provides a smooth burr-free cut on both wiring duct and cover.
DCT
Hand held duct and cover cutting tool
1
Replacement Blade Kit (Includes Blade & Nylon Insert)
• Quickly & easily cuts duct & cover
DCT-BLD
Replacement blade and nylon insert for above tool
1
Replacement Nylon Insert
DCT-BLD
DCT-RI
Replacement nylon insert for above tool
1
NOTE: Always use approved safety goggles when using any tools
ORDERING INFORMATION: Order in multiples of standard pkg. qty.
Use to cut any
PANDUCT ® Duct
or Cover
Note: Cut cover as
shown, latch side-up.
DCT-RI
PANDUCT ® Notching Tool (For use with all duct/raceway types)
A heavy duty tool used to notch slotted wall wiring duct from the bottom of a slot to the base of the
duct. Used with all sizes of slotted wall wiring duct.
DNT-100
Hand held notching tool
1
ORDERING INFORMATION: Order in multiples of standard pkg. qty.
Step 1 —
Notch wiring duct
sidewall at the
desired opening
width
• Notches duct
sidewalls to
bottom scoreline
for “T” and corner
junctions
Step 2 —
Snap off notched
wiring duct piece
at bottom
scoreline
PANDUCT ® Nylon Rivet Installation Tool
An easy to use hand held tool to install PANDUIT Nylon rivets.
TNR
Hand held nylon rivet installation tool
1
PANDUCT ® Nylon Rivets
NR1-C
NR1-M
TNR
NR1
Total Thickness of
Panel & Duct
Panel Hole
Dia. Needed
.158" (4.0)–.187" (4.7)
.188" (4.8)–.218" (5.5)
.219" (5.6)–.250" (6.4)
.251" (6.5) and up
.187" (4.7)
.193" (4.9)
.203" (5.2)
.213" (5.4)
100 pcs.
Nylon rivet for use with TNR Rivet Tool shown above
1000 pcs.
ORDERING INFORMATION: Order in multiples of standard pkg. qty.
Step 1 —
Insert rivet into tool
Step 2 —
Position rivet into hole
Step 3 —
Install rivet with sharp tap
23
PANDUCT ® Accessories—Divider Wall
Duct Divider Wall
For All PVC Duct Types and Sizes (G, F, FS, D)
The wiring duct divider wall is mounted inside any PVC wiring duct in order to create multiple channels within the wiring duct. Simply use the mounting bases below when
installing the duct and the divider wall will “snap” on.
For Duct Height
Inches (mm)
Part Number
Std.
Length
Std
Ctn. Qty.
PANDUCT ® Divider Wall—For Type G, F, FS, D Ducts
PVC Divider Wall snaps onto mounting base below
D1H6
1.00 (25.4)
6 ft.
120 ft.
D1.5H6
1.50 (38.1)
6 ft.
120 ft.
D2H6
2.00 (50.8)
6 ft.
120 ft.
D3H6
3.00 (76.2)
6 ft.
120 ft.
4.00 (101.6)
6 ft.
120 ft.
D4H6
®
PANDUCT Slotted Divider Wall—For Type G, F, FS, D Ducts
PVC Divider Wall snaps onto mounting base below
SD2H6
2.00 (50.8)
6 ft.
120 ft.
SD3H6
3.00 (76.2)
6 ft.
120 ft.
SD4H6
4.00 (101.6)
6 ft.
120 ft.
ORDERING INFORMATION: Order in multiples of standard foot length
• Both versions snap onto DB-C
mounting base
Part Number
Used with Anchors
Std
Pkg. Qty.
PANDUCT ® Divider Wall Mounting Base
Mounting Base accepts divider wall above. Recommend use of 4 mounting bases for every 6 feet of
divider wall installed.
• Installed when mounting duct
• Acts as a shroud around the screw to
protect wires from abrasion
DB-C
Panduit NR1 (See pg. 23) or #8 or #10 screw.
100 pcs.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
12-16"
Installing Base—
Install a DB-C at least every 12" - 16" as
duct is installed.
24
Installing Divider Wall—
Snap the divider wall to the mounting
bases already installed.
For Technical Assistance, call: 888-506-5400, Ext. 8287
PANDUCT ® Accessories—Wire Retainers
Part Number
Length
Inches (mm)
Material
Std
Pkg. Qty.
PANDUCT ® Divider Wall Wire Retainer (snaps-on to divider wall)
Wire retainer for use with duct divider wall (shown on previous page).
T3WR-C
NYLON
1.05" (26.7)
100 pcs.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
Divider Wall Wire Retainer
• “Snaps-on” directly to the divider wall
• Made of Nylon
For Duct Size
Part Number
Material
Width
Std
Pkg. Qty.
Height
PANDUCT ® Type G Duct and Type E Duct Wire Retainer
Wire retainer for use with Type G Duct.
Wire Retainer—Type G, E
• Snaps into slots of Type G & Type E Duct
• Made of Nylon
WR2-C
NYLON
2.0" (50.8)
4.0" (101.6) or Under
100 pcs.
WR3-C
NYLON
3.0" (76.2)
4.0" (101.6) or Under
100 pcs.
WR4-C
NYLON
4.0" (101.6)
4.0" (101.6) or Under
100 pcs.
WR5-C
NYLON
Use with: 2x5, 3x5, 4x5 or 6x4 G-Duct
100 pcs.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
Part Number
Material
For Duct Width
Inches (mm)
Std
Pkg. Qty.
PANDUCT ® Type F Duct Wire Retainer/Labeling Device
Wire retainer for use with Type F Duct. Can also be used as a labeling device (for labels see page 28)
FWR-C
Wire Retainer—Type F
• Snaps into slots of Type F Duct
• One size fits four different duct widths
• Made of Rigid PVC
RIGID PVC
1.50" (38.1)
2.00" (50.8)
3.00" (76.2)
4.00" (101.6)
100 pcs.
NOTE: Full length is used with 4" wide duct. For smaller widths, break off segments at scorelines.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
Part Number
Material
For Duct Width
Inches (mm)
Std
Pkg. Qty.
PANDUCT ® Type FS & D Duct Wire Retainer
Wire retainer for use with Type FS Solid Wall Raceway or Type D Round Hole Duct. Supplied with
adhesive backing for fast installation.
WRS-A-C10
Wire Retainer—Type FS, D
• Mounts onto walls of Type FS Raceway
or Type D Duct
• One size fits three different duct widths
RIGID PVC
1.00" (25.4)
1.50" (38.1)
2.00" (50.8)
100 pcs.
NOTE: Full length is used with 2" wide duct. For smaller widths, break off segments at scorelines.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
25
PANDUCT ® Accessories—Duct Corner & Joining Strips
Part Number
Material
For Duct
Height
Color
Std.
Length
Std
Ctn. Qty.
PANDUCT ® Duct Corner Strip—6 Foot Lengths
For All PVC Wiring Duct Types
6 foot length. Joins sections of duct together at corners or “T” junctions. Used with any PVC Wiring
Duct, Type G, F and D Duct and FS Raceway. 6 foot length is cut by user to fit duct height.
Duct Corner Strip
• Snaps onto duct at corner or “T”
junctions for smooth, round corners
• Strip is cut to length (6 foot lengths) or
is available in pre-cut pieces
CS1BL6
CS1DG6
CS1LG6
CS1WH6
RIGID PVC
Cut to Size
Black
Dark Gray
Light Gray
White
6 ft.
120 ft.
ORDERING INFORMATION: Order number of feet required in multiples of 6ft. or Std. Carton
quantities.
Part Number
Material
For Duct
Height
Color
Std.
Pkg. Qty
PANDUCT ® Duct Corner Strip—Pre Cut Pieces
For All PVC Wiring Duct Types
Pre-cut pieces are cut to size. Joins sections of duct together at corners or “T” junctions. Used with
any PVC Wiring Duct, Type G, F and D Duct and FS Raceway.
CSP1LG-Q
CSP1.5LG-Q
CSP2LG-Q
CSP3LG-Q
CSP4LG-Q
RIGID PVC
1.00" (25.4)
1.50" (38.1)
2.00" (50.8)
3.00" (76.2)
4.00" (101.6)
Light Gray
only
25 pcs.
NOTE: Actual length of CSP pre-cut pieces are less than “For Duct Height” shown.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
Part Number
Material
For Duct
Height
Color
Std.
Length
Std
Ctn. Qty.
PANDUCT ® Duct Joining Strip—6 Foot Lengths
For All PVC Wiring Duct Types
6 foot length. Joins sections of duct together. Used with any PVC Wiring Duct, Type G, F and D Duct
and FS Raceway. 6 foot length is cut by user to fit duct height.
Duct Joining Strip
• Snaps onto duct to join sections
together
• Strip is cut to length (6 foot lengths) or
is available in pre-cut pieces
DJS1BL6
DJS1DG6
DJS1LG6
DJS1WH6
RIGID PVC
Cut to Size
Black
Dark Gray
Light Gray
White
6 ft.
120 ft.
ORDERING INFORMATION: Order number of feet required in multiples of 6ft. or Std. Carton
quantities.
Part Number
Material
For Duct
Height
Color
Std.
Pkg. Qty
PANDUCT ® Duct Joining Strip—Pre Cut Pieces
For All PVC Wiring Duct Types
Pre-cut pieces are cut to size. Joins sections of duct together. Used with any PVC Wiring Duct, Type
G, F and D Duct and FS Raceway.
DJSP1LG-Q
DJSP1.5LG-Q
DJSP2LG-Q
DJSP3LG-Q
DJSP4LG-Q
RIGID PVC
1.00" (25.4)
1.50" (38.1)
2.00" (50.8)
3.00" (76.2)
4.00" (101.6)
Light Gray
only
25 pcs.
NOTE: Actual length of DJSP pre-cut pieces are less than “For Duct Height” shown.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
26
For Technical Assistance, call: 888-506-5400, Ext. 8287
PANDUCT ® Accessories—Mounting Brackets & Fasteners
Part Number
Screw
Provided
Part Number
Screw
Required
Std.
Pkg.
Qty.
For Duct
Width
Inches (mm)
PANDUCT ® Snap-Clip Mounting Bracket—Type G, F & FS Duct
With Mounting Screw
Snap Clip—Types G, F, & FS
•
•
•
•
•
Duct easily snaps into bracket
No mounting holes required in duct
Ensures no metal is inside the duct
Snap- clip spacing is not critical
Simplifies fabrication drawings and
panel layout
S1F-C
S1.5F-C
S2F-C
S3F-C
S4F-C
Without Mounting Screw
#8-32x1/4
(Provided)
SNS1F-C
SNS1.5F-C
SNS2F-C
SNS3F-C
SNS4F-C
#8-32x1/4
(User Supplied)
1.00" (25.4)
1.50" (38.1)
2.00" (50.8)
3.00" (76.2)
4.00" (101.6)
100 pcs.
Snap-clip provided with or without self tapping screw. Made from nickel plated spring steel.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
Part Number
Screw
Provided
Part Number
Screw
Required
Std.
Pkg.
Qty.
For Duct
Width
Inches (mm)
PANDUCT ® Snap-Clip Mounting Bracket—Type NE, NS, PE,
PS, D, E & S Duct
With Mounting Screw
S.5-C
S.75-C
Snap Clip—Types NE, NS, PE,
PS, D, E & S
•
•
•
•
•
Duct easily snaps into bracket
No mounting holes required in duct
Ensures no metal is inside the duct
Snap-clip spacing is not critical
Simplifies fabrication drawings and
panel layout
S1-C
S1.5-C
S2-C
S2.5-C
S3-C
S4-C
Without Mounting Screw
#6-32x1/4
(Provided)
SNS.5-C
SNS.75-C
#8-32x1/4
(Provided)
SNS1-C
SNS1.5-C
SNS2-C
SNS2.5-C
SNS3-C
SNS4-C
#6-32x1/4
(User Supplied)
.50" (12.7)
.75" (19.1)
100 pcs.
#8-32x1/4
(User Supplied)
1.00" (25.4)
1.50" (38.1)
2.00" (50.8)
2.50" (63.5)
3.00" (76.2)
4.00" (101.6)
100 pcs.
Snap-clip provided with or without self tapping screw. Made from nickel plated spring steel.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
Part Number
Description
Thread
Size
For Duct
Width
Inches (mm)
Std.
Pkg.
Qty.
PANDUCT ® Stud Type Fasteners—For all Duct/Raceway Types
F1-C
F1.5-C
F2-C
F3-C
F4-C
Stud Type Fasteners
• Secures cover in place during shipping
or extreme vibration
• Provides tamper resistance
• Fits into the standard mounting holes
available on duct.†
Corrosion resistant zinc plated
steel stud with fastener. Secures
cover in place. Also used to
mount a smaller size duct within
a larger duct.
10/24 threads
on each end
1.00" (25.4)
1.50" (38.1)
2.00" (50.8)
3.00" (76.2)
4.00" (101.6)
100 pcs.
†A .200" (5mm) hole must be drilled in the cover to accommodate the fastener
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
• Can be used to mount a smaller size
duct within larger duct to create a
completely separate channel
27
PANDUCT ® Accessories—Labeling
Part Number
Length
Inches (mm)
Material
Std
Pkg. Qty.
PANDUCT ® Type F Duct Wire Retainer/Labeling Device
Wire retainer for use with Type F Duct. Also used as a labeling device.
FWR-C
Wire Retainer/Labeling Device—
Type F
• Used to identify both wires exiting duct
and adjacent terminations
• Use with write-on, computer printable
labels, or write directly on the labeling
device
• Made of rigid PVC
• For use with F Duct Only
PX-0
PX-2
1.50" (38.1)
2.00" (50.8)
3.00" (76.2)
4.00" (101.6)
RIGID PVC
100 pcs.
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
Labeling Inside Duct—
Install label (shown below)
on Wire Retainer. Install
label & mount between
fingers facing inward.
Part Number
Labeling Outside Duct—
Break off the last segment from wire retainer (below 1.5
mark) and snap onto the back of the remaining segment.
Install label & mount between fingers facing outward.
Color
Std
Pkg.
Qty.
Std
Ctn.
Qty.
12 pcs.
48 pcs.
Description
Marking Pens—For use with FWR-C Labeling Device
PX-0
PFX-0
PFX-2
Black
Regular tip pen
PX-2
Red
12 pcs.
48 pcs.
PFX-0
Black
12 pcs.
48 pcs.
12 pcs.
48 pcs.
Fine tip pen
PFX-2
Red
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
• Fast drying permanent ink
Part Number
Description
Label
Size
WxH
Labels
Per
Row
Rows
Per
Fanfold
Sheet
Width
Std
Pkg.
Qty.
Identification Labels—For use with FWR-C Labeling Device
Labels for FWR-C Labeling
Device
• Write-on labels attach to the recessed
area on FWR-C labeling device
• Computer printable or hand writable
• Individually die cut
28
PDL-110-1
■
TEDLAR
Adhesive backed
2.00" x
.38"
3
24
7.20"
1000
labels
PDL-111-1
MYLAR
Adhesive backed
2.00" x
.38"
3
24
7.20"
1000
labels
Non-smudge
paper with
overlaminate
2.00" x
.38"
3
24
7.20"
1000
labels
PDL-PB1
ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty.
■
TEDLAR is a registered trademark of E.I. Dupont Co.
NOTE: For more information on computer printable labels and software contact factory to request
catalog SA101N315A-ID
For Technical Assistance, call: 888-506-5400, Ext. 8287
PANDUCT ® Type G Wiring Duct—Dimensions
Dimensions are shown for reference only.
Consult factory for specific dimensional
needs.
F
E
D
H
C
T
B
A
Note: “A” dimension is measured at base
Note: “K” dimension shown in mounting hole
dimensions below
Mounting Hole Dimensions:
For .5", .75", 1.0" and 1.5" width duct:
.50"
(12)
Typ
C
.195"
(5) Typ
2"
4"
(51)
(102)
For 2.0", 2.5", 3.0", 4.0" and 6.0"
width duct:
K
K
4"
(102)
C
2"
(51)
NOTE: For Type G Duct, if no mounting holes
are required, add NM to the Part Number
DUCT SIZE
(W x H)
DIMENSIONS-Inches (mm)
D
E
F
H
0.38
0.20
0.50
0.50
(9.5)
(5.0)
(12.7)
(12.7)
0.75
0.20
0.50
1.00
(19.1)
(5.0)
(12.7)
(25.4)
.5 x .5
(12.7) (12.7)
.5 x 1
(12.7) (25.4)
A
0.69
(17.5)
0.69
(17.5)
B
0.56
(14.2)
1.09
(27.1)
C
0.69
(17.5)
0.69
(17.5)
.75 x .75
(19.1) (19.1)
.75 x 1
(19.1) (25.4)
0.94
(23.9)
0.94
(23.9)
0.83
(21.0)
1.09
(27.6)
0.94
(23.9)
0.94
(23.9)
0.58
(14.8)
0.75
(19.1)
0.31
(7.9)
0.31
(7.9)
0.80
(20.3)
0.80
(20.3)
0.75
(19.1)
1.00
(25.4)
0.06
(1.4)
0.06
(1.4)
.75 x 1.5
(19.1) (38.1)
0.94
(23.9)
1.58
(40.0)
0.94
(23.9)
1.20
(30.5)
0.31
(7.9)
0.80
(20.3)
1.50
(38.1)
0.07
(1.8)
.75 x 2
(19.1) (50.8)
0.94
(23.9)
2.09
(53.0)
0.94
(23.9)
1.63
(41.3)
0.31
(7.9)
0.80
(20.3)
2.00
(50.8)
0.08
(2.0)
1x1
(19.1) (25.4)
1.25
(31.8)
1.09
(27.6)
1.25
(31.8)
0.75
(19.1)
0.31
(7.9)
0.80
(20.3)
1.00
(25.4)
1 x 1.5
(25.4) (38.1)
1.25
(31.8)
1.59
(40.3)
1.25
(31.8)
1.20
(30.5)
0.31
(7.9)
0.80
(20.3)
1.50
(38.1)
1x2
(25.4) (38.1)
1.25
(31.8)
2.09
(53.0)
1.25
(31.8)
1.63
(41.3)
0.31
(7.9)
0.80
(20.3)
2.00
(50.8)
1x3
(25.4) (76.2)
1.25
(31.8)
3.10
(78.6)
1.25
(31.8)
2.63
(66.7)
0.31
(7.9)
1.00
(25.4)
3.00
(76.2)
1x4
(25.4) (101.5)
1.25
(31.8)
4.10
(104.0)
1.25
(31.8)
3.63
(92.1)
0.31
(7.9)
1.00
(25.4)
4.00
(101.6)
1.5 x 1
(38.1) (25.4)
1.75
(44.5)
1.09
(27.6)
1.75
(44.5)
7.50
(190.5)
0.31
(7.9)
0.80
(20.3)
1.00
(25.4)
0.06
(1.5)
1.5 x 1.5
(38.1) (38.1)
1.75
(44.5)
1.59
(40.3)
1.75
(44.5)
1.20
(30.5)
0.31
(7.9)
0.80
(20.3)
1.50
(38.1)
0.07
(1.8)
1.5 x 2
(38.1) (50.8)
1.75
(44.5)
2.09
(53.0)
1.75
(44.5)
1.63
(41.3)
0.31
(7.9)
0.80
(20.3)
2.00
(50.8)
0.08
(2.0)
1.5 x 3
(38.1) (76.2)
1.5 x4
(38.1) (101.6)
1.75
(44.5)
1.75
(44.5)
3.10
(78.6)
4.10
(104.0)
1.75
(44.5)
1.75
(44.5)
2.63
(66.7)
3.63
(92.1)
0.31
(7.9)
0.31
(7.9)
1.00
(25.4)
1.00
(25.4)
3.00
(76.2)
4.00
(101.6)
0.10
(2.4)
0.11
(2.7)
2 x1
(50.8) (25.4)
2x1.5
(50.8) (38.1)
2.25
(57.2)
2.25
(57.2)
1.09
(27.6)
1.59
(40.3)
2.25
(57.2)
2.25
(57.2)
0.75
(19.1)
1.20
(30.5)
0.31
(7.9)
0.31
(7.9)
0.80
(20.3)
0.80
(20.3)
1.00
(25.4)
1.50
(38.1)
0.50
(12.7)
0.50
(12.7)
0.06
(1.5)
0.70
(17.8)
2x2
(50.8) (50.8)
2.25
(57.2)
2.09
(53.0)
2.25
(57.2)
1.63
(41.3)
0.31
(7.9)
0.80
(20.3)
2.00
(50.8)
0.50
(12.7)
0.08
(2.0)
2x3
(50.8) (76.2)
2.25
(57.2)
3.10
(78.6)
2.25
(57.2)
2.63
(66.7)
0.31
(7.9)
1.00
(25.4)
3.00
(76.2)
0.50
(12.7)
0.10
(2.4)
2x4
(50.8) (101.6)
2.25
(57.2)
4.10
(104.0)
2.25
(57.2)
3.63
(92.1)
0.31
(7.9)
1.00
(25.4)
4.00
(101.6)
0.50
(12.7)
0.11
(2.7)
2x5
(50.8) (127.0)
2.25
(57.2)
5.11
(129.7)
2.25
(57.2)
4.63
(117.5)
0.38
(9.5)
1.33
(33.9)
5.00
(127.0)
0.50
(12.7)
0.12
(2.9)
2.5 x 3
(63.5) (76.2)
2.75
(69.9)
3.10
(78.7)
2.75
(69.9)
2.63
(66.7)
0.31
(7.9)
1.00
(25.4)
3.00
(76.2)
0.75
(19.1)
0.10
(2.5)
3x1
(76.2) (25.4)
3.25
(82.6)
1.09
(27.6)
3.25
(82.6)
0.75
(19.1)
0.31
(7.9)
0.80
(20.3)
1.00
(25.4)
0.50
(12.7)
0.08
(1.9)
3x2
(76.2) (50.8)
3.25
(82.6)
2.09
(53.1)
3.25
(82.6)
1.63
(41.3)
0.31
(7.9)
0.80
(20.3)
2.00
(50.8)
1.00
(25.4)
0.08
(2.0)
3x3
(76.2) (76.2)
3.25
(82.6)
3.10
(78.7)
3.25
(82.6)
2.63
(66.7)
0.31
(7.9)
1.00
(25.4)
3.00
(76.2)
1.00
(25.4)
0.10
(2.4)
3x4
(76.2) (101.6)
3x5
(76.2) (127.0)
3.25
(82.6)
3.25
(82.6)
4.10
(104.1)
5.11
(129.8)
3.25
(82.6)
3.25
(82.6)
3.63
(92.1)
4.63
(117.5)
0.31
(7.9)
0.38
(9.5)
1.00
(25.4)
1.33
(33.9)
4.00
(101.6)
5.00
(127.0)
1.00
(25.4)
1.00
(25.4)
0.11
(2.7)
0.12
(2.9)
4 x 1.5
(101.6) (38.1)
4x2
(101.6) (50.8)
4.25
(108.0)
4.25
(108.0)
1.59
(40.3)
2.08
(52.8)
4.25
(108.0)
4.25
(108.0)
1.20
(30.5)
1.63
(41.3)
0.31
(7.9)
0.31
(7.9)
0.80
(20.3)
0.80
(20.3)
1.50
(38.1)
2.00
(50.8)
1.50
(38.1)
1.50
(38.1)
0.07
(1.8)
0.08
(2.0)
4x3
(101.6) (76.2)
4.25
(108.0)
3.10
(78.7)
4.25
(108.0)
2.63
(66.7)
0.31
(7.9)
1.00
(25.4)
3.00
(76.2)
1.50
(38.1)
0.10
(2.5)
4x4
(101.6) (101.6)
4.25
4.10
(108.0) (104.1)
4.25
(108.0)
3.63
(92.1)
0.31
(7.9)
1.00
(25.4)
4.00
(101.6)
1.50
(38.1)
0.11
(2.7)
4x5
(101.6) (127.0)
4.25
5.11
(108.0) (129.8)
4.25
4.63
(108.0) (117.5)
0.38
(9.5)
1.33
(33.9)
5.00
(127.0)
1.50
(38.1)
0.12
(2.9)
6.25
(158.8)
0.31
(7.9)
1.00
(25.4)
4.00
(101.6)
2.50
(63.5)
0.11
(2.8)
6x4
6.25
4.11
(152.4) (101.6) (158.8) (104.4)
(see pg. 36 for color and size chart)
3.63
(92.1)
K
ON CENTERLINE
Type G Plastic Wiring
Duct Dimensions
T
0.05
(1.3)
0.05
(1.3)
0.06
(1.4)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
29
PANDUCT ® Type F & FS Wiring Duct—Dimensions
Dimensions are shown for reference only.
Consult factory for specific dimensional
needs.
>
For .5", .75", 1.0" and 1.5" duct height:
F
C
B
>
E D
T
H
A
For 2", 3", 4" and 5" duct height:
F
C
E
T
B
D
H
A
Note: “A” dimension is measured at base
Note: “K” dimension shown in mounting hole
dimensions below
Mounting Hole Dimensions:
>
For .5", .75", 1.0" and 1.5" width duct:
.50"
(12)
TWP
C
2"
(51)
2"
(51)
.195"
(5)
TWP
>
For 2.0", 2.5", 3.0", 4.0" and 6.0"
width duct:
K
K
2"
(51)
C
2"
(51)
>
DIMENSIONS-Inches (mm)
D
E
F
H
0.38
0.20
0.50
0.50
(9.5)
(5.0)
(12.7) (12.7)
DUCT SIZE
(W x H)
.5 x .5
(12.7) (12.7)
A
0.69
(17.5)
B
0.56
(14.2)
C
0.69
(17.5)
.5 x 1
(12.7) (25.4)
0.69
(17.5)
1.09
(27.6)
0.69
(17.5)
0.75
(19.1)
0.20
(5.0)
0.50
(12.7)
1.00
(25.4)
0.05
(1.3)
.75 x .75
(19.1) (19.1)
0.94
(23.9)
0.83
(21.0)
0.94
(23.9)
0.58
(14.8)
0.20
(5.0)
0.50
(12.7)
0.75
(19.1)
0.06
(1.4)
.75 x 1
(19.1) (25.4)
0.94
(23.9)
1.09
(27.6)
0.94
(23.9)
N/A
N/A
N/A
1.00
(25.4)
0.07
(1.4)
.75 x 1.5
(19.1) (38.1)
.75 x 2
(19.1) (50.8)
0.94
(23.9)
0.94
(23.9)
1.58
(40.0)
2.09
(53.0)
0.94
(23.9)
0.94
(23.9)
1.20
(30.5)
0.20
(5.0)
0.50
(12.7)
N/A
N/A
N/A
1.50
(38.1)
2.00
(50.8)
0.07
(1.8)
0.08
(2.0)
1x1
(19.1) (25.4)
1.25
(31.8)
1.09
(27.6)
1.25
(31.8)
0.75
(19.1)
0.20
(5.0)
0.50
(12.7)
1.00
(25.4)
1 x 1.5
(25.4) (38.1)
1.25
(31.8)
1.59
(40.3)
1.25
(31.8)
1.20
(30.5)
0.20
(5.0)
0.50
(12.7)
1.50
(38.1)
1x2
(25.4) (38.1)
1.25
(31.8)
2.09
(53.0)
1.25
(31.8)
1.63
(41.3)
0.20
(5.0)
0.50
(12.7)
2.00
(50.8)
1x3
(25.4) (76.2)
1.5 x 1
(38.1) (25.4)
1.25
(31.8)
1.75
(44.5)
3.10
(78.6)
1.09
(27.6)
1.25
(31.8)
1.75
(44.5)
2.63
(66.7)
0.75
(19.1)
0.20
(5.0)
0.20
(5.0)
0.50
(12.7)
0.50
(12.7)
3.00
(76.2)
1.00
(25.4)
1.5 x 1.5
(38.1) (38.1)
1.5 x 2
(38.1) (50.8)
1.75
(44.5)
1.75
(44.5)
1.59
(40.3)
2.09
(53.0)
1.75
(44.5)
1.75
(44.5)
1.20
(30.5)
1.63
(41.3)
0.20
(5.0)
0.20
(5.0)
0.50
(12.7)
0.50
(12.7)
1.50
(38.1)
2.00
(50.8)
0.07
(1.8)
0.08
(2.0)
1.5 x 3
(38.1) (76.2)
1.75
(44.5)
3.10
(78.6)
1.75
(44.5)
2.63
(66.7)
0.20
(5.0)
0.50
(12.7)
3.00
(76.2)
0.10
(2.4)
2 x1
(50.8) (25.4)
2.25
(57.2)
1.09
(27.6)
2.25
(57.2)
0.75
(19.1)
0.20
(5.0)
0.50
(12.7)
1.00
(25.4)
0.50
(12.7)
0.06
(1.5)
2x1.5
(50.8) (38.1)
2.25
(57.2)
1.59
(40.3)
2.25
(57.2)
1.20
(30.5)
0.20
(5.0)
0.50
(12.7)
1.50
(38.1)
0.50
(12.7)
0.07
(1.8)
2x2
(50.8) (50.8)
2x3
(50.8) (76.2)
2.25
(57.2)
2.25
(57.2)
2.09
(53.0)
3.10
(78.6)
2.25
(57.2)
2.25
(57.2)
1.63
(41.3)
2.63
(66.7)
0.20
(5.0)
0.20
(5.0)
0.50
(12.7)
0.50
(12.7)
2.00
(50.8)
3.00
(76.2)
0.50
(12.7)
0.50
(12.7)
0.08
(2.0)
0.10
(2.4)
2x4
(50.8) (101.6)
2x5
(50.8) (127.0)
2.25
(57.2)
2.25
(57.2)
4.10
(104.0)
5.11
(129.7)
2.25
(57.2)
2.25
(57.2)
3.63
(92.1)
4.63
(117.5)
0.20
(5.0)
0.20
(5.0)
0.50
(12.7)
0.50
(12.7)
4.00
(101.6)
5.00
(127.0)
0.50
(12.7)
0.50
(12.7)
0.11
(2.7)
0.12
(2.9)
2.5 x 3
(63.5) (76.2)
2.75
(69.9)
3.10
(78.7)
2.75
(69.9)
N/A
N/A
N/A
3.00
(76.2)
N/A
0.10
(2.4)
3x1
(76.2) (25.4)
3.25
(82.6)
1.09
(27.7)
3.25
(82.6)
0.75
(19.1)
0.20
(5.0)
0.50
(12.7)
1.00
(25.4)
1.00
(25.4)
0.08
(2.0)
3x2
(76.2) (50.8)
3.25
(82.6)
2.09
(53.1)
3.25
(82.6)
1.63
(41.3)
0.20
(5.0)
0.50
(12.7)
2.00
(50.8)
1.00
(25.4)
0.08
(2.0)
3x3
(76.2) (76.2)
4 x 1.5
(101.6) (38.1)
3.25
(82.6)
4.25
(108.0)
3.10
(78.7)
1.59
(40.3)
3.25
(82.6)
4.25
(108.0)
2.63
(66.7)
0.20
(5.0)
0.50
(12.7)
1.00
(25.4)
N/A
N/A
N/A
3.00
(76.2)
1.50
(38.1)
N/A
0.10
(2.4)
0.08
(2.0)
4x2
(101.6) (50.8)
4x3
(101.6) (76.2)
4.25
(108.0)
4.25
(108.0)
2.08
(52.8)
3.10
(78.7)
4.25
(108.0)
4.25
(108.0)
1.63
(41.3)
2.63
(66.7)
0.20
(5.0)
0.20
(5.0)
0.50
(12.7)
0.50
(12.7)
2.00
(50.8)
3.00
(76.2)
1.50
(38.1)
1.50
(38.1)
0.08
(2.0)
0.10
(2.5)
4x4
(101.6) (101.6)
4.25
4.10
4.25
(108.0) (104.1) (108.0)
3.63
(92.1)
0.20
(5.0)
0.50
(12.7)
4.00
(101.6)
1.50
(38.1)
0.11
(2.7)
4x5
(101.6) (127.0)
4.25
5.11
4.25
(108.0) (129.8) (108.0)
4.63
(117.5)
0.20
(5.0)
0.50
(12.7)
5.00
(127.0)
1.50
(38.1)
0.12
(2.9)
4.00
(101.6)
N/A
0.11
(2.8)
6x4
(152.4) (101.6)
6.25
4.11
6.25
N/A
N/A
N/A
(158.8) (104.4) (158.8)
>Available for Type FS Duct only (see pg. 36 for color and size chart).
NOTE: For Type F Duct, if no mounting holes
are required, add NM to the Part Number
NOTE 2: For Type FS Duct, no mounting
holes are provided; if required delete NM
from the Part Number
30
For Technical Assistance, call: 888-506-5400, Ext. 8287
K
ON CENTERLINE
Type F & FS Plastic
Wiring Duct Dimensions
T
0.05
(1.3)
0.06
(1.4)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.06
(1.5)
PANDUCT ® Type NE, NS, PE, PS, D, E & S—Dimensions
Dimensions are shown for reference only.
Consult factory for specific dimensional
needs.
C
F
E
T
H
B
A
D
Type E, NE, PE
(Snap-in-Slot)
Type S, NS, PS
(Solid Wall)
Type D
(Round Hole)
Note: “A” dimension is measured at base
Note: “K” dimension shown in mounting hole
dimensions below
Mounting Hole Dimensions:
For .5", .75", 1.0" and 1.5" width duct:
.50"
(12)
Typ
C
.195"
(5) Typ
2"
4"
(51)
(102)
For 2.0", 2.5", 3.0", 4.0" and 6.0"
width duct:
K
K
4"
(102)
C
2"
(51)
NOTE: For Types E, NE, PE & D Duct, if no
mounting holes are required, add NM to the
Part Number
NOTE 2: For Types S, NS & PS Duct, no
mounting holes are provided; if required
delete NM from the Part Number
DUCT SIZE (W
x H)
A
.5 x .5
0.63
(12.7) (12.7)
(16.0)
.5 x.62
0.63
(12.7) (15.7)
(16.0)
.5 x 1
0.63
(12.7) (25.4)
(16.0)
.5 x 1.25
0.63
(12.7)
(16.0)
.5 x 1.75
0.63
(12.70) (44.45)
(16.0)
.5 x 2
0.63
(12.70)(50.80)
(16.0)
.75 x .75
0.88
(19.1) (19.1)
(22.4)
.75 x 1
0.88
(19.1) (25.4)
(22.4)
.75 x 1.5
0.88
(19.1) (38.1)
(22.4)
.75 x 2
0.88
(19.1) (50.8)
(22.4)
1x1
1.14
(19.1) (25.4)
(29.0)
1 x 1.25
1.14
(25.40)(31.75)
(29.0)
1 x 1.5
1.14
(25.4) (38.1)
(29.0)
1x2
1.14
(25.4) (38.1)
(29.0)
1 x 2.5
1.14
(25.40) (63.50)
(29.0)
1x3
1.14
(25.4) (76.2)
(29.0)
1x4
1.14
(25.4) (101.5)
(29.0)
1.5 x 1
1.64
(38.1) (25.4)
(41.7)
1.5 x 1.5
1.64
(38.1) (38.1)
(41.7)
1.5 x 2
1.64
(38.1) (50.8)
(41.7)
1.5 x 3
1.64
(38.1) (76.2)
(41.7)
1.5 x4
1.64
(38.1) (101.6)
(41.7)
2 x1
2.14
(50.8) (25.4)
(54.4)
2x1.5
2.14
(50.8) (38.1)
(54.4)
2x2
2.14
(50.8) (50.8)
(54.4)
2 x 2.5
2.14
(50.80) (63.50)
(54.4)
2x3
2.14
(50.8) (76.2)
(54.4)
2x4
2.14
(50.8) (101.6)
(54.4)
2x5
2.14
(50.8) (127.0)
(54.4)
2.5 x 3
2.64
(63.5) (76.2)
(67.1)
3x1
3.14
(76.2) (25.4)
(79.8)
3 x 1.25
3.14
(76.20)(31.75)
(79.8)
3x2
3.14
(76.2) (50.8)
(79.8)
3x3
3.14
(76.2) (76.2)
(79.8)
3x4
3.14
(76.2) (101.6)
(79.8)
3x5
3.14
(76.2) (127.0)
(79.8)
4 x 1.5
4.14
(101.6) (38.1)
(105.2)
4x2
4.14
(101.6) (50.8)
(105.2)
4x3
4.14
(101.6) (76.2)
(105.2)
4x4
4.14
(101.6) (101.6)
(105.2)
4x5
4.14
(101.6) (127.0)
(105.2)
Not all sizes available for each
DIMENSIONS-Inches (mm)
B
D
E
F
K
0.56
0.38
0.37
0.80
(14.2)
(9.7)
(9.4)
(20.3)
0.68
0.38
0.37
0.80
(17.3)
(9.7)
(9.4)
(20.3)
1.06
0.75
0.31
0.80
(26.9)
(19.1)
(7.9)
(20.3)
1.31
1.00
0.31
0.80
(33.3)
(25.4)
(7.9)
(20.3)
1.81
1.44
0.31
0.80
(46.0)
(36.6)
(7.9)
(20.3)
2.06
1.63
0.31
0.80
(52.3)
(41.4)
(7.9)
(20.3)
0.81
0.56
0.31
0.80
(20.6)
(14.2)
(7.9)
(20.3)
1.06
0.75
0.31
0.80
(26.9)
(19.1)
(7.9)
(20.3)
1.56
1.20
0.31
0.80
(39.6)
(30.5)
(7.9)
(20.3)
2.12
1.63
0.31
0.80
(53.8)
(41.4)
(7.9)
(20.3)
1.12
0.75
0.31
0.80
(28.4)
(19.1)
(7.9)
(20.3)
1.37
1.00
0.31
0.80
(34.8)
(25.4)
(7.9)
(20.3)
1.62
1.20
0.31
0.80
(41.1)
(30.5)
(7.9)
(20.3)
2.12
1.63
0.31
0.80
(53.8)
(41.4)
(7.9)
(20.3)
2.62
2.13
0.31
0.80
(66.5)
(54.1)
(7.9)
(20.3)
3.12
2.63
0.31
1.00
(79.2)
(66.8)
(7.9)
(25.4)
4.12
3.63
0.31
1.00
(104.6)
(92.2)
(7.9)
(25.4)
1.12
0.75
0.31
0.80
(28.4)
(19.1)
(7.9)
(20.3)
1.62
1.20
0.31
0.80
(41.1)
(30.5)
(7.9)
(20.3)
2.12
1.63
0.31
0.80
(53.8)
(41.4)
(7.9)
(20.3)
3.12
2.63
0.31
1.00
(79.2)
(66.8)
(7.9)
(25.4)
4.12
3.63
0.31
1.00
(104.6)
(92.2)
(7.9)
(25.4)
1.12
0.75
0.31
0.80
0.50
(28.4)
(19.1)
(7.9)
(20.3)
(12.7)
1.62
1.20
0.31
0.80
0.50
(41.1)
(30.5)
(7.9)
(20.3)
(12.7)
2.12
1.63
0.31
0.80
0.50
(53.8)
(41.4)
(7.9)
(20.3)
(12.7)
2.62
2.13
0.31
0.80
0.50
(66.5)
(54.1)
(7.9)
(20.3)
(12.7)
3.12
2.63
0.31
1.00
0.50
(79.2)
(66.8)
(7.9)
(25.4)
(12.7)
4.12
3.63
0.31
1.00
0.50
(104.6)
(92.2)
(7.9)
(25.4)
(12.7)
5.12
3.63
0.37
1.50
0.50
(130.0)
(92.2)
(9.4)
(38.1)
(12.7)
3.12
2.63
0.31
1.00
0.75
(79.2)
(66.8)
(7.9)
(25.4)
(19.1)
1.12
.75
.31
0.80
1.00
(28.4)
(19.1)
(7.9)
(20.3)
(25.4)
1.37
1.00
0.31
0.80
1.00
(34.8)
(25.4)
(7.9)
(20.3)
(25.4)
2.12
1.63
0.31
0.80
1.00
(53.8)
(41.4)
(7.9)
(20.3)
(25.4)
3.12
2.63
0.31
1.00
1.00
(79.2)
(66.8)
(7.9)
(25.4)
(25.4)
4.12
3.63
0.31
1.00
1.00
(104.6)
(92.2)
(7.9)
(25.4)
(25.4)
5.12
4.63
0.37
1.34
1.00
(130.0) (117.6)
(9.4)
(34.0)
(25.4)
1.62
1.20
0.31
0.80
1.50
(41.1)
(30.5)
(7.9)
(20.3)
(38.1)
2.12
1.63
0.31
0.80
1.50
(53.8)
(41.4)
(7.9)
(20.3)
(38.1)
3.12
2.63
0.31
1.00
1.50
(79.2)
(66.8)
(7.9)
(25.4)
(38.1)
4.12
3.63
0.31
1.00
1.50
(104.6)
(92.2)
(7.9)
(25.4)
(38.1)
5.12
4.63
0.37
1.50
1.50
(130.0) (117.6)
(9.4)
(38.1)
(38.1)
duct type (see pg. 36 for color and size chart)
ON CENTERLINE
Type NE, NS, PE, PS, E, S
and D Plastic Wiring Duct
Dimensions
T
0.05
(1.3)
0.05
(1.3)
0.06
(1.5)
0.06
(1.5)
0.07
(1.8)
0.08
(1.9)
0.06
(1.4)
0.06
(1.5)
0.07
(1.8)
0.08
(1.9)
0.06
(1.5)
0.07
(1.7)
0.07
(1.8)
0.08
(2.0)
0.09
(2.2)
0.10
(2.4)
0.11
(2.7)
0.06
(1.5)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.06
(1.5)
0.06
(1.5)
0.08
(2.0)
0.09
(2.2)
0.10
(2.4)
0.11
(2.7)
0.13
(3.2)
0.10
(2.4)
0.60
(15.2)
0.07
(1.7)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.12
(2.9)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.12
(2.9)
Cover
0.69
(17.5)
0.69
(17.5)
0.69
(17.5)
0.69
(17.5)
0.69
(17.5)
0.69
(17.5)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.75
(69.9)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
31
PANDUCT ® Type G, F & FS Wiring Duct—Wirefill Capacity
ELECTRICAL
NOMINAL DUCT SIZE
(W X H)
8
AWG
AREA
in²
0.250
.5x.5
0.500
.5x1
0.563
.75x.75
0.750
.75x1
1.125
.75x1.5
1.500
.75x2
1.000
1x1
1.500
1x1.5
2.000
1x2
3.000
1x3
4.000
1x4
1.500
1.5x1
2.250
1.5x1.5
3.000
1.5x2
4.500
1.5x3
6.000
1.5x4
2.000
2x1
3.000
2x1.5
4.000
2x2
6.000
2x3
8.000
2x4
10.000
2x5
7.500
2.5x3
3.000
3x1
6.000
3x2
9.000
3x3
12.000
3x4
15.000
3x5
6.000
4x1.5
8.000
4x2
12.000
4x3
16.000
4x4
20.000
4x5
24.000
6x4
Not all sizes available for each duct type
10
AWG
12
AWG
14 AWG
.153
.122
.158
.105
.139
.165
.096
.125
.084
.113
.065
.217
.250
.422
THHN
MTW
THHN
MTW
MTW
TFFN
MTW
TFFN
MTW
MTW
UTP/
CM
CAT 5
STP/
CM
CAT 5
UTP/CM
7
15
17
22
33
44
30
44
59
89
118
44
67
89
133
177
59
89
118
177
237
296
222
89
177
266
355
444
177
237
355
473
592
710
5
10
12
16
24
31
21
31
42
63
84
31
47
63
94
126
42
63
84
126
168
210
157
63
126
189
252
315
126
268
252
336
420
504
16
31
35
47
70
93
62
93
124
186
248
93
140
186
279
372
124
186
248
372
496
620
465
186
372
558
744
930
372
496
744
992
1240
1488
9
18
21
27
41
55
37
55
73
110
146
55
82
110
165
219
73
110
146
219
293
366
274
110
219
329
439
549
319
293
439
585
731
878
20
40
46
61
91
121
81
121
162
243
324
121
182
243
364
486
162
243
324
486
648
810
607
243
486
729
972
1215
486
648
972
1296
1620
1944
11
22
25
34
50
67
45
67
90
134
179
67
101
134
201
269
90
134
179
269
358
448
336
134
269
403
537
671
269
358
537
716
895
1074
34
68
76
101
152
203
135
203
270
406
541
203
304
406
609
811
270
406
541
811
1062
1352
1014
406
811
1217
1623
2029
811
1062
1623
2164
2705
3246
3
6
7
9
14
18
12
18
24
36
49
18
27
36
55
73
24
36
49
73
97
121
91
36
73
109
146
182
73
97
146
194
243
291
2
5
5
7
10
14
9
14
18
27
37
14
21
27
41
55
18
27
37
55
73
91
69
27
55
82
110
137
55
73
110
146
183
219
1
2
2
2
4
5
3
5
6
10
13
5
7
10
14
19
6
10
13
19
26
32
24
10
19
29
39
48
19
26
39
51
64
77
3
6
10
6
13
6
12
19
11
26
7
14
22
13
29
9
18
29
17
39
14
27
43
26
58
18
37
58
34
78
12
24
38
23
52
18
37
58
34
78
24
49
77
46
104
37
73
115
69
155
49
98
154
92
207
18
37
58
34
78
28
55
86
52
117
37
73
115
69
155
55
110
173
103
233
73
146
230
137
311
24
49
77
46
104
37
73
115
69
155
49
98
154
92
207
73
146
230
137
311
98
195
307
183
415
122
244
384
229
518
92
183
288
172
389
37
73
115
69
155
73
146
230
137
311
110
220
346
206
466
147
293
461
275
622
184
366
576
343
777
73
146
230
137
311
98
195
307
183
415
147
293
461
275
622
196
391
614
366
829
245
488
768
458
1037
294
586
921
549
1244
(see pg. 36 for color and size chart).
Σ (Number of Wires x Wire O.D.)
1.75 x (Wire O.D.)²
1. Determine the number of wires the duct will need to hold.
2. Determine the wire outside diameter (for multiple wires see formula at left).
3. Calculate the necessary wire area using the following formula:
Wire Area
Example:
=Number of Wires X [1.75 X (Wire O.D.)²]
Wire Area = 59 X [1.75 X (.107)²]
= 59 X .020 =
1.182
4. Choose a Duct with W X H that is equal to or greater than the result from step 3.
Example:
32
Duct W x H
Number of Wires=
Number of Wires
wires with .165 O.D.=15 x .165 = 2.475
wires with .065 O.D.=28 x .065 = 1.820
wires with .125 O.D.=16 x .125 = 2.000
total wires
= 6.295
6.295 ÷ 59 = Wire O.D.=
24 AWG
THHN
Wire O.D. for multiple wire types:
15
28
16
59
18 AWG
.216
Formula to approximate
wiring duct size needed:
=
16 AWG
THHN
Formula used to
calculate fill capacity:
Wire
O.D.
CAT 5 CABLES
22
AWG
.107
Selected Duct Area
>
_ Calculated Wire Area
Example: For Duct Size .75 X 1.5 Duct Area=
For Duct Size 1.5 X 1 Duct Area=
.75 X 1.5 = 1.125
1.5 X 1.0 = 1.500
No Good 1.125 < 1.182
Good 1.500 > 1.182
In the above example 1 x 1.5 duct or a larger duct size could also be used.
For Technical Assistance, call: 888-506-5400, Ext. 8287
PANDUCT ® Type NE, NS, PE, PS, D, E & S—Wirefill
ELECTR IC AL
NOMINAL DUCT SIZE
(W X H)
AREA
in ²
8
AWG
10
AWG
.216
.153
THHN
.5 x .5
0.250
.5 x.62
0.310
.5 x 1
0.500
.5 x 1.25
0.625
.5 x 1.75
0.875
.5 x 2
1.000
.75 x .75
0.563
.75 x 1
0.750
.75 x 1.5
1.125
.75 x 2
1.500
1x1
1.000
1 x 1.25
1.250
1 x 1.5
1.500
1x2
2.000
1 x 2.5
2.500
1x3
3.000
1x4
4.000
1.5 x 1
1.500
1.5 x 1.5
2.250
1.5 x 2
3.000
1.5 x 3
4.500
1.5 x4
6.000
2 x1
2.000
2x1.5
3.000
2x2
4.000
2 x 2.5
5.000
2x3
6.000
2x4
8.000
2x5
10.000
2.5 x 3
7.500
3x1
3.000
3 x 1.25
3.750
3x2
6.000
3x3
9.000
3x4
12.000
3x5
15.000
4 x 1.5
6.000
4x2
8.000
4x3
12.000
4x4
16.000
4x5
20.000
Not all sizes available for each duct type
THHN
12
AWG
.122
14 AWG
.158
THHN
MTW
.105
T HHN
3
5
8
5
11
3
7
10
6
14
5
11
17
10
23
7
13
21
13
28
9
19
29
18
40
11
21
34
20
45
6
12
19
11
26
8
16
25
15
34
12
24
38
23
51
16
32
50
30
68
11
21
34
20
45
13
27
42
25
57
16
32
50
30
68
21
43
67
40
91
27
53
84
50
113
32
64
101
60
136
43
85
134
80
181
16
32
50
30
68
24
48
76
45
102
32
64
101
60
136
48
96
151
90
204
64
128
202
120
272
21
43
67
40
91
32
64
101
60
136
43
85
134
80
181
54
107
168
100
227
64
128
202
120
272
86
171
269
160
363
107
214
336
200
454
80
160
252
150
340
32
64
101
60
136
40
80
126
75
170
64
128
202
120
272
96
192
302
180
408
129
256
403
240
544
161
320
504
300
680
64
128
202
120
272
86
171
269
160
363
129
256
403
240
544
171
342
537
320
726
214
427
672
401
907
(see pg. 36 for color and size chart).
Formula used to
calculate fill capacity:
Formula to approximate
wiring duct size needed:
Wir e O.D. for multiple wire types:
Wire
O.D.
=
Σ (Number of Wires x Wire O.D.)
.165
.096
.125
.084
.113
24 AWG
.065
.217
.250
.422
STP /
CM
CAT 5
UTP /CM
2
2
4
5
7
8
5
6
9
12
8
10
12
16
20
24
32
12
18
24
36
48
16
24
32
40
48
64
80
60
24
30
48
72
96
120
48
64
96
128
160
1
1
1
2
2
3
2
2
3
4
3
4
4
6
7
8
11
4
6
8
13
17
6
8
11
14
17
22
28
21
8
11
17
25
34
42
17
22
34
45
56
MTW
MTW
TFFN
MTW
TF FN
MTW
MTW
UTP/
CM
CAT 5
6
8
13
16
23
26
15
19
29
39
26
32
39
52
65
78
104
39
58
78
116
155
52
78
104
129
155
207
259
194
78
97
155
233
311
388
155
207
311
414
518
5
6
9
11
16
18
10
14
21
28
18
23
28
37
46
55
73
28
41
55
83
110
37
55
73
92
110
147
184
138
55
69
110
165
220
275
110
147
220
294
367
14
17
27
34
47
54
31
41
61
81
54
68
81
109
136
163
217
81
122
163
244
326
109
163
217
271
326
434
543
407
163
203
326
488
651
814
326
434
651
868
1085
8
10
16
20
28
32
18
24
36
48
32
40
48
64
80
96
128
48
72
96
144
192
64
96
128
160
192
256
320
240
96
120
192
288
384
480
192
256
384
512
640
18
22
35
44
62
71
40
53
80
106
71
89
106
142
177
213
283
106
159
213
319
425
142
213
283
354
425
567
709
531
213
266
425
638
850
1063
425
567
850
1134
1417
10
12
20
24
34
39
22
29
44
59
39
49
59
78
98
117
157
59
88
117
176
235
78
117
157
196
235
313
392
294
117
147
235
352
470
587
235
313
470
627
783
30
37
59
74
104
118
67
89
133
178
118
148
178
237
296
355
473
178
266
355
533
710
237
355
473
592
710
947
1183
888
355
444
710
1065
1420
1775
710
947
1420
1893
2367
3
3
5
7
9
11
6
8
12
16
11
13
16
21
27
32
42
16
24
32
48
64
21
32
42
53
64
85
106
80
32
40
64
96
127
159
64
85
127
170
212
Number of Wires=
Duct W x H
2.00 x (Wire O.D.)²
1. Determine the number of wires the duct will need to hold.
2. Determine the wire outside diameter (for multiple wires see formula at left).
3. Calculate the necessary wire area using the following formula:
Wire Area =Number of Wires X [2 X (Wire O.D.)²]
Example:
Wire Area = 59 X [2 X (.107)²] = 59 X .023 =
1.357
4. Choose a Duct with W X H that is equal to or greater than the result from step 3.
wires with .165 O.D. =15 x .165 = 2.475
wires with .065 O.D. =28 x .065 = 1.820
wires with .125 O.D. =16 x .125 = 2.000
total wires
= 6.295
6.295 ÷ 59 = Wire O.D.=
22
AWG
18 AWG
Number of Wires
Example:
15
28
16
59
.139
CAT 5 CABLES
16 AWG
.107
Selected Duct Area
_ Calculated Wire Area
>
Example: For Duct Size .75 X 1.5 Duct Area= .75 X 1.5 = 1.125
For Duct Size 1.5 X 1 Duct Area= 1.5 X 1.0 = 1.500
No Good 1.125 < 1.357
Good 1.500 > 1.357
In the above example 1 x 1.5 duct or a larger duct size could also be used.
33
PANDUCT ® Wiring Duct & Raceway—Physical Properties
PROPERTIES
GENERAL
Specific Gravity
Heat Deflection Temperature @264 psi
Thermal Expansion
Thermal Conductivity
Compressive Yield Strength
BURNING CHARACTERISTICS
Flammability Class
Smoke Density
Limited Oxygen Index (LOI)
HARDNESS
Durometer Hardness
Rockwell Hardness
TENSILE
Strength at Yield
Modulus
FLEXURAL
Strength at Yield
Modulus
IMPACT STRENGTH
Notched Izod (.125") at:
23°C (73°F)
0°C (32°F)
-18°C (0°F)
Unnotched Modified Izod at:
23°C (73°F)
0°C (32°F)
-18°C (0°F)
ELECTRICAL PROPERTIES
Power Factor:
60 Hz @30°C (86°F)
1 MHz @30°C (86°F)
Dielectric Constant:
60 Hz @30°C (86°F)
1 MHz @30°C (86°F)
Dielectric Strength:
Normal
Moist
UNITS
TEST
METHOD
g/cc
°F
10-5 in/in/°F
(BTU-in/hr-ft²-F°)
psi
ASTM D 792
ASTM D 648
ASTM D 696
ASTM C 177
ASTM D 695
—
—
—
PVC
NORYL
POLYCARB.
1.38
163
3.7
1.3
8,100
1.08
212
3.8
1.1
12,000
1.21
270
3.9
1.4
11,000
UL94
ASTM E 662
ASTM D 2863
V-0
538
45
V-1
N/A
30
N/A
108
35
“D”
“R”
ASTM D 2240
ASTM D 785
78
111
85
115
88
118
psi
psi
ASTM D 638
ASTM D 638
6,200
390,000
6,900
380,000
9,000
350,000
psi
psi
ASTM D 790
ASTM D 790
9,500
350,000
11,400
365,000
13,200
330,000
17.0
1.6
1.1
5.0
N/A
N/A
16.0
N/A
N/A
>64.0
>64.0
>42.0
N/A
N/A
N/A
60.0
N/A
N/A
2.90
4.00
N/A
N/A
N/A
N/A
3.90
3.30
2.65
N/A
3.01
2.96
690
700
400
N/A
425
N/A
ASTM D 256
ft-lb/in
ft-lb/in
ft-lb/in
ASTM D 256
ft-lb/in
ft-lb/in
ft-lb/in
ASTM D 150
—
—
ASTM D 150
—
—
ASTM D 149
volts/mil
volts/mil
NOTE: To the best of our knowledge the above information is accurate, is based upon accepted technical practices and is believed to be reliable. Panduit assumes no liability for the accuracy or completeness of this information.
34
Rigid Polyvinyl Chloride
(PVC)
NORYL ®
POLYCARBONATE
(PC)
A general purpose material for use in
indoor applications. PVC has a UL flammability rating of V-0 and is UL Recognized for continuous use up to 50°C
(122°F). PVC is an economical wiring
duct material.
A special purpose material for use in
halogen free, or high temperature applications. NORYL ® has a UL flammability
rating of V-1 and is UL Recognized for
continuous use up to 95°C (203°F),
and is 20% lighter than PVC.
A special purpose material for use
where low halogen and low smoke generation is critical. Ideally suited for transportation industry regulations.
Polycarbonate has a recommended
temperature use of up to 125°C (257°F),
and is 14% lighter than PVC.
Duct Types: G, F, FS, D, E & S
Duct Types: NE & NS
Duct Types: PE & PS
For Technical Assistance, call: 888-506-5400, Ext. 8287
PANDUCT ® Wiring Duct & Raceway—Physical Properties
Flammability
This test method measures the
comparative burning characteristics of solid plastic materials.
Materials Classed V-0 (Criteria)*
• Afterflame for each sample does not exceed 10 seconds following
the removal of each flame application.
• Total afterflame time for a set of five samples following both flame
applications is not greater than 50 seconds.
• Afterflame plus afterglow time for each sample does not exceed 30
seconds following the second flame application.
• A sample does not exhibit afterflame or afterglow up to the holding
clamp.
• The cotton indicator below the sample does not ignite from flaming
particles or droplets from the test sample.
Materials Classed V-1 (Criteria)*
• Not have any specimens which burn with flaming combustion for
more than 30 seconds after either application of the test flame.
• Not have a total flaming combustion time exceeding 250 seconds for
the 10 flame applications for each set of five specimens.
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp.
• Not have any specimens which drip flaming particles that ignite the
dry absorbent surgical cotton located 12" (305mm) below the
test specimen.
• Not have any specimens with glowing combustion which persists for
more than 60 seconds after the second removal of the test flame.
UL Vertical Burning Test
Test samples measure 125mm by
13mm by the minimum thickness
of the end product. Tests are conducted utilizing unaged samples
(as manufactured) and aged samples (7 days @ 70°C, 158°F.) A
standard test flame is applied for
two 10 second applications to the
unsupported end of a vertically
clamped sample. The afterflame
time is recorded following the first
flame application. Both afterflame
and afterglow times are recorded
following the second flame application. Also observed and documented are, if the sample drips
flaming particles that ignite the
cotton layer below.
*The flammability rating determined from this method does not indicate its performance in enduse applications.
Cutting Wiring Duct & Cover
For small quantities, use the DCT Duct Cutting Tool. For larger quantities
use a plastic cutting saw blade for clean burr-free cuts. Recommend:
Carbide 80T or 100T; 0.90” thickness, 0.125 kerf.
35
PANDUCT ® Wiring Duct & Raceway—Color Selection
LG
DUCT SIZE
(W X H) inches
WH
Light Gray
White
BL
Dark Gray
.5 x .5
G F FS E S
.5 x.62
E S
NE NS
E S
NE NS
G F FS E S
NE NS
.5 x 1
DG
G F FS E S
G
CL
Black
E
S
E
S
Clear
E
S
F FS E S
NE NS
G
E
S
.5 x 1.25
E S
NE NS G F FS E S
NE NS
G
FS
E
S
.5 x 1.75
E S
NE NS G F FS E S
NE NS
G
FS
E
S
.5 x 2
E S
G F FS E S
G
FS
E
S
G F FS E S D
G F FS E S D
G
FS
E
S
E
S
D
G
G
E S D
G
FS
E
S
E
S
D
G F FS E S D
G F FS E S D
G
FS
E
S
E
S
D
G
G
G
FS
E
S
G
FS
E
S
E
S
.75 x .75
.75 x 1
.75 x 1.5
.75 x 2
1x 1
FS E S D
FS E S D
FS E S D
G F FS E S D NE NS G F FS E S D NE NS
1 x 1.25
E S
E S
E
S
D
G
FS
E
S
D
1 x 1.5
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
1x 2
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
E
S
1 x 2.5
E S
E S
1x 3
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
1x 4
G
G
FS
E
S
G
FS
E
S
D
G
FS
E
S
1.5 x 1
FS E S D NE NS G
G F FS E S
FS E S D NE NS
G F FS E S
1.5 x 1.5
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
1.5 x 2
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
1.5 x 3
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
1.5 x4
G
2 x1
2x1.5
2x2
FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
G F FS E S D NE NS G F FS E S D NE NS
FS E S D NE NS G
G
FS
E
S
G
FS
E
S
D
G F FS E S
G
FS
E
S
G
FS
E
S
G
FS
E
S
D
E
S
G F FS E S
G F FS E S D NE NS G F FS E S D NE NS
2 x 2.5
E S
E S
2x 3
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
2x4
G
FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
2x 5
G
FS E S
FS E S
G
FS
E
S
2.5 x 3
G
FS E S D NE NS G
FS E S D NE NS
G
FS
E
S
E
S
D
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
E
S
E
S
D
3x 1
3 x 1.25
G
E S D NE NS
E S D NE NS
3x2
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
3x3
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
3x4
G
FS E S D NE NS G
FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
3x5
G
FS E S
NE NS G F FS E S D NE NS
4 x 1.5
G
FS E S D NE NS G
G
FS
E
S
FS E S D NE NS
G
FS
E
S
4x2
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
4x3
G F FS E S D NE NS G F FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
4x4
G
FS E S D NE NS G
FS E S D NE NS
G
FS
E
S
G
FS
E
S
D
4x5
G
FS E S
NE NS G F FS E S D NE NS
G
FS
E
S
6x4
G
FS
PE
PE
Intrinsic Blue
PS
PS
PE
PS
PE
G
FS
E
S
G
FS
E
S
G
FS
G
FS
E
S
G
FS
E
S
G
FS
E
S
G
FS
E
S
PS
PE
PE
IB
PS
PS
FS
Intrinsic Blue Color—IB
Intrinsic Blue wiring duct is made from the same PVC material as our standard PVC duct. Intrinsic Blue is an internationally recognized standard Blue color that identifies the wiring inside the duct as “incapable of releasing sufficient electrical or thermal
energy under normal or abnormal conditions to cause ignition of a specific hazardous atmospheric mixture in its most easily
ignited concentrations.”* This is excellent for use in electrical panels that are designed for Chemical Plants, Grain Elevators or
wherever explosive gases may exist.
*ISA-RD12.6 (Instrument Society of America)
36
For Technical Assistance, call: 888-506-5400, Ext. 8287
Alphabetical Part Number Index
C.5LG6 .........4, 6, 8, 18, 20, 21
C.75LG6 .......4, 6, 8, 18, 20, 21
C1.5LG6 .......4, 6, 8, 18, 20, 21
C1LG6 ..........4, 6, 8, 18, 20, 21
C2.5LG6 ...........4, 8, 18, 20, 21
C2LG6 ..........4, 6, 8, 18, 20, 21
C3LG6 ..........4, 6, 8, 18, 20, 21
C4LG6 ..........4, 6, 8, 18, 20, 21
C6LG6 ................................4, 8
CS1BL6 ................................26
CS1DG6 ...............................26
CS1LG6................................26
CS1WH6...............................26
CSP1.5LG-Q ........................26
CSP1LG-Q ...........................26
CSP2LG-Q ...........................26
CSP3LG-Q ...........................26
CSP4LG-Q ...........................26
D.75X.75LG6 ........................18
D.75X1.5LG6 ........................18
D.75X1LG6 ...........................18
D1.5H6 .................................24
D1.5X1.5LG6........................18
D1.5X2LG6...........................18
D1.5X3LG6...........................18
D1.5X4LG6...........................18
D1H6 ....................................24
D1X1.5LG6...........................18
D1X1LG6..............................18
D1X2LG6..............................18
D1X3LG6..............................18
D1X4LG6..............................18
D2.5X3LG6...........................18
D2H6 ....................................24
D2X1LG6..............................18
D2X2LG6..............................18
D2X3LG6..............................18
D2X4LG6..............................18
D3H6 ....................................24
D3X1.25LG6.........................18
D3X1LG6..............................18
D3X2LG6..............................18
D3X3LG6..............................18
D3X4LG6..............................18
D4H6 ....................................24
D4X1.5LG6...........................18
D4X2LG6..............................18
D4X3LG6..............................18
D4X4LG6..............................18
DB-C.....................................24
DCT ......................................23
DCT-BLD...............................23
DCT-RI ..................................23
DJS1BL6 ..............................26
DJS1DG6 .............................26
DJS1LG6 ..............................26
DJS1WH6.............................26
DJSP1.5LG-Q.......................26
DJSP1LG-Q..........................26
DJSP2LG-Q..........................26
DJSP3LG-Q..........................26
DJSP4LG-Q..........................26
DNT-100................................23
E.5X.5LG6 ............................20
E.5X.62LG6 ..........................20
E.5X1.25LG6 ........................20
E.5X1.75LG6 ........................20
E.5X1LG6 .............................20
E.5X2LG6 .............................20
E.75X.75LG6 ........................20
E.75X1.5LG6 ........................20
E.75X1LG6 ...........................20
E.75X2LG6 ...........................20
E1.5X1.5LG6 ........................20
E1.5X1LG6 ...........................20
E1.5X2LG6 ...........................20
E1.5X3LG6 ...........................20
E1.5X4LG6 ...........................20
E1X1.25LG6 .........................20
E1X1.5LG6 ...........................20
E1X1LG6 ..............................20
E1X2.5LG6 ...........................20
E1X2LG6 ..............................20
E1X3LG6 ..............................20
E1X4LG6 ..............................20
E2.5X3LG6 ...........................20
E2X1.5LG6 ...........................20
E2X1LG6 ..............................20
E2X2.5LG6 ...........................20
E2X2LG6 ..............................20
E2X3LG6 ..............................20
E2X4LG6 ..............................20
E2X5LG6 ..............................20
E3X1.25LG6 .........................20
E3X1LG6 ..............................20
E3X2LG6 ..............................20
E3X3LG6 ..............................20
E3X4LG6 ..............................20
E3X5LG6 ..............................20
E4X1.5LG6 ...........................20
E4X2LG6 ..............................20
E4X3LG6 ..............................20
E4X4LG6 ..............................20
E4X5LG6 ..............................20
F.5X.5LG6 ...............................6
F.5X1LG6................................6
F.75X.75LG6 ...........................6
F.75X1.5LG6 ...........................6
F1-C......................................27
F1.5-C...................................27
F1.5X1.5LG6 ..........................6
F1.5X1LG6 .............................6
F1.5X2LG6 .............................6
F1.5X3LG6 .............................6
F1.5X4LG6 .............................6
F1X1.5LG6 .............................6
F1X1LG6 ................................6
F1X2LG6 ................................6
F1X3LG6 ................................6
F1X4LG6 ................................6
F2-C..................................... 27
F2X1.5LG6 ............................ 6
F2X1LG6 ............................... 6
F2X2LG6 ............................... 6
F2X3LG6 ............................... 6
F2X4LG6 ............................... 6
F2X5LG6 ............................... 6
F3-C..................................... 27
F3X1LG6 ............................... 6
F3X2LG6 ............................... 6
F3X3LG6 ............................... 6
F3X4LG6 ............................... 6
F3X5LG6 ............................... 6
F4-C..................................... 27
F4X2LG6 ............................... 6
F4X3LG6 ............................... 6
F4X4LG6 ............................... 6
F4X5LG6 ............................... 6
FS.5X.5LG6NM ..................... 8
FS.5X1LG6NM ...................... 8
FS.75X.75LG6NM ................. 8
FS.75X1.5LG6NM ................. 8
FS.75X1LG6NM .................... 8
FS.75X2LG6NM .................... 8
FS1.5X1.5LG6NM ................. 8
FS1.5X1LG6NM .................... 8
FS1.5X2LG6NM .................... 8
FS1.5X3LG6NM .................... 8
FS1.5X4LG6NM .................... 8
FS1X1.5LG6NM .................... 8
FS1X1LG6NM ....................... 8
FS1X2LG6NM ....................... 8
FS1X3LG6NM ....................... 8
FS1X4LG6NM ....................... 8
FS2.5X3LG6NM .................... 8
FS2X1.5LG6NM .................... 8
FS2X1LG6NM ....................... 8
FS2X2LG6NM ....................... 8
FS2X3LG6NM ....................... 8
FS2X4LG6NM ....................... 8
FS2X5LG6NM ....................... 8
FS3X1LG6NM ....................... 8
FS3X2LG6NM ....................... 8
FS3X3LG6NM ....................... 8
FS3X4LG6NM ....................... 8
FS3X5LG6NM ....................... 8
FS4X1.5LG6NM .................... 8
FS4X2LG6NM ....................... 8
FS4X3LG6NM ....................... 8
FS4X4LG6NM ....................... 8
FS4X5LG6NM ....................... 8
FS6X4LG6NM ....................... 8
FWR-C........................... 25, 28
G.5X.5LG6............................. 4
G.5X1LG6.............................. 4
G.75X.75LG6......................... 4
G.75X1.5LG6......................... 4
G.75X1LG6............................ 4
G.75X2LG6............................ 4
G1.5X1.5LG6......................... 4
G1.5X1LG6............................ 4
G1.5X2LG6............................ 4
G1.5X3LG6............................ 4
G1.5X4LG6............................ 4
G1X1.5LG6............................ 4
G1X1LG6............................... 4
G1X2LG6............................... 4
G1X3LG6............................... 4
G1X4LG6............................... 4
G2.5X3LG6............................ 4
G2X1.5LG6............................ 4
G2X1LG6............................... 4
G2X2LG6............................... 4
G2X3LG6............................... 4
G2X4LG6............................... 4
G2X5LG6............................... 4
G3X1LG6............................... 4
G3X2LG6............................... 4
G3X3LG6............................... 4
G3X4LG6............................... 4
G3X5LG6............................... 4
G4X1.5LG6............................ 4
G4X2LG6............................... 4
G4X3LG6............................... 4
G4X4LG6............................... 4
G4X5LG6............................... 4
G6X4LG6............................... 4
NC.5LG6........................ 10, 12
NC1.5LG6...................... 10, 12
NC1LG6......................... 10, 12
NC2.5LG6...................... 10, 12
NC2LG6......................... 10, 12
NC3LG6......................... 10, 12
NC4LG6......................... 10, 12
NE.5X.5WH6 ....................... 10
NE.5X.62LG6....................... 10
NE.5X1.25LG6..................... 10
NE.5X1.75LG6..................... 10
NE.5X1LG6.......................... 10
NE1.5X1.5LG6..................... 10
NE1.5X1WH6 ...................... 10
NE1.5X2LG6........................ 10
NE1.5X3LG6........................ 10
NE1.5X4LG6........................ 10
NE1X1.5LG6........................ 10
NE1X1LG6........................... 10
NE1X2LG6........................... 10
NE1X3LG6........................... 10
NE1X4LG6........................... 10
NE2.5X3LG6........................ 10
NE2X1.5WH6 ...................... 10
NE2X1LG6........................... 10
NE2X2LG6........................... 10
NE2X3LG6........................... 10
NE2X4LG6........................... 10
NE3X1LG6........................... 10
NE3X2LG6........................... 10
NE3X3LG6........................... 10
NE3X4LG6........................... 10
NE3X5LG6........................... 10
37
Alphabetical Part Number Index
NE4X2LG6 ...........................10
NE4X3LG6 ...........................10
NE4X4LG6 ...........................10
NE4X5LG6 ...........................10
NR1-C ..................................23
NR1-M ..................................23
NS.5X.5WH6NM ..................12
NS.5X.62LG6NM..................12
NS.5X1.25LG6NM................12
NS.5X1.75LG6NM................12
NS.5X1LG6NM.....................12
NS1.5X1.5LG6NM................12
NS1.5X1WH6NM .................12
NS1.5X2LG6NM...................12
NS1.5X3LG6NM...................12
NS1.5X4LG6NM...................12
NS1X1.5LG6NM...................12
NS1X1LG6NM......................12
NS1X2LG6NM......................12
NS1X3LG6NM......................12
NS1X4LG6NM......................12
NS2.5X3LG6NM...................12
NS2X1.5WH6NM .................12
NS2X1LG6NM......................12
NS2X2LG6NM......................12
NS2X3LG6NM......................12
NS2X4LG6NM......................12
NS3X1LG6NM......................12
NS3X2LG6NM......................12
NS3X3LG6NM......................12
NS3X4LG6NM......................12
NS3X5LG6NM......................12
NS4X2LG6NM......................12
NS4X3LG6NM......................12
NS4X4LG6NM......................12
NS4X5LG6NM......................12
P32W2A2-50-7.....................22
P32W2A2-50-7.....................22
P32W2A2-50-7.....................22
P32W2A2-50-72...................22
P32W2A2-50-72...................22
P32W2A2-50-72...................22
P32W2A2-75-7.....................22
P32W2A2-75-7.....................22
P32W2A2-75-72...................22
P32W2A2-75-72...................22
PC.75CL6....................... 14, 16
PC1.5CL6....................... 14, 16
PC1CL6................................14
PC2CL6.......................... 14, 16
PC3CL6.......................... 14, 16
PC4CL6.......................... 14, 16
PDL-110-1 ............................28
PDL-111-1 ............................28
PDL-PB1 ..............................28
PE.75X1CL6.........................14
PE1.5X1.5CL6......................14
PE1X2CL6............................14
PE2X1.5CL6.........................14
PE2X2CL6............................14
38
PE3X1.25CL6 ...................... 14
PE4X4CL6 ........................... 14
PFX-0 ...................................28
PFX-2 ...................................28
PS.75X1CL6NM ................... 16
PS1.5X1.5CL6NM ................ 16
PS2X1.5CL6NM ................... 16
PS2X2CL6NM...................... 16
PS3X1.25CL6NM .................16
PS4X4CL6NM...................... 16
PX-0 ..................................... 28
PX-2 ..................................... 28
S.5-C .................................... 27
S.5X.5LG6NM ...................... 21
S.5X.62LG6NM .................... 21
S.5X1.25LG6NM .................. 21
S.5X1.75LG6NM .................. 21
S.5X1LG6NM ....................... 21
S.5X2LG6NM ....................... 21
S.75-C .................................. 27
S.75X.75LG6NM .................. 21
S.75X1.5LG6NM .................. 21
S.75X1LG6NM ..................... 21
S.75X2LG6NM ..................... 21
S1-C ..................................... 27
S1.5-C .................................. 27
S1.5F-C................................ 27
S1.5X1.5LG6NM .................. 21
S1.5X1LG6NM ..................... 21
S1.5X2LG6NM ..................... 21
S1.5X3LG6NM ..................... 21
S1.5X4LG6NM ..................... 21
S1F-C...................................27
S1X1.25LG6NM ................... 21
S1X1.5LG6NM ..................... 21
S1X1LG6NM ........................21
S1X2.5LG6NM ..................... 21
S1X2LG6NM ........................21
S1X3LG6NM ........................21
S1X4LG6NM ........................21
S2-C ..................................... 27
S2.5-C .................................. 27
S2.5X3LG6NM ..................... 21
S2F-C...................................27
S2X1.5LG6NM ..................... 21
S2X1LG6NM ........................21
S2X2.5LG6NM ..................... 21
S2X2LG6NM ........................21
S2X3LG6NM ........................21
S2X4LG6NM ........................21
S2X5LG6NM ........................21
S3-C ..................................... 27
S3F-C...................................27
S3X1.25LG6NM ................... 21
S3X1LG6NM ........................21
S3X2LG6NM ........................21
S3X3LG6NM ........................21
S3X4LG6NM ........................21
S3X5LG6NM ........................21
S4-C ..................................... 27
S4F-C................................... 27
S4X1.5LG6NM..................... 21
S4X2LG6NM........................ 21
S4X3LG6NM........................ 21
S4X4LG6NM........................ 21
S4X5LG6NM........................ 21
SD2H6 ................................. 24
SD3H6 ................................. 24
SD4H6 ................................. 24
SNS.5-C............................... 27
SNS.75-C............................. 27
SNS1-C................................ 27
SNS1.5-C............................. 27
SNS1.5F-C........................... 27
SNS1F-C.............................. 27
SNS2-C................................ 27
SNS2.5-C............................. 27
SNS2F-C.............................. 27
SNS3-C................................ 27
SNS3F-C.............................. 27
SNS4-C................................ 27
SNS4F-C.............................. 27
T3WR-C............................... 25
TNR...................................... 23
WR2-C ................................. 25
WR3-C ................................. 25
WR4-C ................................. 25
WR5-C ................................. 25
WRS-A-C10 ......................... 25
For Technical Assistance, call: 888-506-5400, Ext. 8287
NOTES
39
PANDUIT PANDUCT ® Wiring Duct is Part of the Full Line of
Wiring and Communication Products
Terminals
Power Connectors
Ask for Terminal Catalog
SA101N21B-NL
Ask for Power Connector
Catalog SA101N15C-NL
Cable Ties/Wiring Accessories
Ask for Cable Ties/Wiring
Accessories Catalog
SA101N275C-WC
Heat Shrink Products
Stainless Steel Products
Also Ask for Electrical
Condensed Catalog
SA101N13J
Ask for Abrasion Protection
Catalog SA101N48D
Ask for PAN-STEEL™ System
Catalog SA101N16G
Communication Products
Ask for Communication
Products Catalog
SA101N152E-OP
40
Surface Raceway
Identification Products
Ask for PAN-WAY ™ Surface
Raceway Catalog
SA101N60A
Ask for PAN-CODE ™ Catalog
SA101N315A-ID
工商网监
湘ICP备2023018690号
