®
PANDUCT ® Wiring Duct
PANDUCT ® Wiring Duct
SA-WDCB05
Overview
(replaces SA101N64D-LP)
Overview
New Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Control Panel
PANDUCT ® Wiring Duct for Control Panel Applications Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B1
Control Panel Applications Roadmap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2-B3
Type G Wide Slot Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B4-B5
Type F Narrow Slot Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B6-B7
New Flush Cover Type D Round Hole Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8-B9
Type MC Metric Narrow Slot Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-B11
New Type H Hinged Cover Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B12
Control
Panel
Special Environment
PANDUCT ® Wiring Duct for Special Environments Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C1
Special Environments Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C2-C3
New Type NNC Halogen Free Metric Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C4-C5
Type NE NORYL* Halogen Free Wiring Duct. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C6-C7
New Type TMC Low Smoke/Low Toxicity Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C8-C9
Special
Environment
Voice & Data
PANDUCT ® Wiring Duct for Communication Applications Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D1
Communication Applications Roadmap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D2-D5
New Type H Hinged Cover Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D6-D7
Type FS Solid Wall Raceway. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D8-D9
Type G Wide Slot Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D10
1" Bend Radius Corner Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D11
Bend Radius Control Trumpet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D11
TAK-TY ® Hook & Loop Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D12
New ULTRA-CINCH ™ Hook & Loop Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D12
TAK-TAPE ™ Hook & Loop Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D13
TAK-TY ® Hook & Loop Cable Tie Mounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D13
Cable Management Solutions for Network Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D14
Voice &
Data
Tools & Accessories
PANDUCT ® Accessories and Installation Tools Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E1
Accessories and Installation Tools Roadmap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E2-E3
New Type FL Flexible Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E4
Solid and Slotted Divider Wall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E5
Mounting Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E6
Wire Retainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E6-E7
Duct Corner Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E8
Duct Joining Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E8
Mounting Brackets and Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E9-E10
PAN-TY ® Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E10
4-Way Adhesive Backed Mounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E11
Tie Mounts — Mechanically Applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E11
Tie Anchor Mounts — Screw Applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E12
Low Profile Mounts — Screw Applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E12
Adhesive Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E12-E13
Duct Cutting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E14
Duct Finger Cutting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E14
Duct Notching Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E15
Nylon Rivet Installation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E15
Tools &
Accessories
Technical
Info
Technical Info
Dimensions and Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F1-F7
Wirefill Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F8-F11
Material Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F12-F13
Color Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F14
Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F15
Explanation of Agency Approvals and Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F15-F16
Index
Index
Alphanumeric Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G1-G5
*NORYL is a registered trademark of General Electric Company.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
A1
Overview
Type H — Hinged Cover
Wiring Duct
Wiring Duct
from PANDUIT ®
Designed for wire management
applications where frequent moves, adds,
changes or equipment upgrades require
repeated, easy and quick access to
duct channel.
Control
Panel
See pages B12, D6 & D7 for details.
Type FL
Special
Environment
—
Flexible Wiring Duct
Designed to route and protect wires installed in control panel
applications that require flexibility.
See page E4 for details.
Voice &
Data
Type NNC
—
Halogen Free Metric Wiring Duct
Designed for panel applications where high temperatures or halogen free
requirements exist.
See pages C4-C5 for details.
Tools &
Accessories
Type TMC — Low Smoke/Low Toxicity
Wiring Duct
Designed for wire management applications in public transportation.
Technical
Info
See pages C8-C9 for details.
Flush Cover Type D
Hole Wiring Duct
—
Round
Improved profile design provides greater
wirefill capacity.
Index
See pages B8-B9 for details.
A2
®
PANDUCT ® Wiring Duct
Overview
For over 45 years, PANDUIT ® has been the
world leader in the design and manufacture
of wiring duct in a wide selection of sizes,
styles, colors and materials. The PANDUIT ®
name has become synonymous with high
quality, innovative wiring duct products
used to route, protect and conceal wiring
in a wide variety of industrial control and
telecommunications applications. PANDUIT ®
continues to develop new wiring duct solutions
to satisfy the wire management challenges
facing our customers worldwide.
Control
Panel
Special
Environment
Wiring Duct Functional Part Number System Makes Ordering Easy
G
F
FS
H
D
NNC
NE
MC
TMC
=
=
=
=
=
=
=
=
=
G
.5
Type/Style
Nominal
Width
In. or mm
Wide Finger Flush Design
Narrow Finger Flush Design
Solid Wall Flush Design
Wide Finger Hinged Design
Round Hole Flush Design
Halogen Free Design
NORYL * Wide Finger Design
Metric Narrow Finger Design
Low Smoke Metric Design
X
.5
LG
6
-A
Nominal
Height
In. or mm
Color
Length
–A = Adhesive Backed
= Without Adhesive
(leave blank)
NM = No Mounting Holes
LG
DG
WH
BL
IB
BR
IG
=
=
=
=
=
=
=
Light Gray
Dark Gray
White
Black
Intrinsic Blue
Beige
International
Grey
Ft. or M
Voice &
Data
Tools &
Accessories
Technical
Info
Index
Note: See page F12 for UL94 requirements.
*NORYL is a registered trademark of General Electric Company.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
A3
Overview
Wiring Duct Overview
Notes
Control
Panel
Special
Environment
Voice &
Data
Tools &
Accessories
Technical
Info
Index
A4
Wiring Duct for Control Panel Applications
Overview
PANDUCT ® Wiring Duct is the premium wire management solution for routing and
concealing wiring in control panels. A wide variety of sizes are available to meet the wire
capacity needs and space constraints of the smallest wall mounted panels to the largest
Control
Panel
integrated systems. In addition, five innovative wiring duct styles accommodate a variety
pe
of G
specification requirements, control panel designs and post-installation needs.
Some of the features and benefits found in all
PANDUCT ® Wiring Duct types include:
Special
Environment
Smooth corners and edges will not abrade wiring
or irritate hands
Integrated nonskid liner and unique cover designs
insure the duct cover will not slide once installed
or during vibration
UL Recognized as meeting the requirements of
UL Standard 1565 for Positioning Devices
Voice &
Data
CE compliant for panels that are to be exported
to Europe
Specially formulated PVC material meets the
NFPA79: 2002 flame retardancy requirements for
nonmetallic duct in industrial equipment
Tools &
Accessories
PVC material carries a UL94 flammability rating of V-0
for excellent flame retardancy
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B1
Wiring Duct for Control Panel Applications
Overview
Control
Panel
3
4
Special
Environment
2
a
1
5
Voice &
Data
a For information on the
complete line of PANDUCT
Accessories see page E1
®
1 Type H Hinged Cover Wiring Duct
Duct cover hinges open,
providing easy access to
cabling without the need to
remove the cover. Ideal for
applications with frequent
moves, adds and changes.
Tools &
Accessories
Technical
Info
PAGE B12
2 Type F Narrow Slot Wiring Duct
PAGES B6/B7
Narrow finger and slot
design for high-density
terminal blocks. Restricted
slots retain conductors.
Index
B2
Overview
Control
Panel
3 Type G Wide Slot Wiring Duct
PAGES B4/B5
Wide finger and slot design
allows both single conductors
and small cable bundles to
be easily transitioned from
the channel. Fits a wide
variety of applications.
4 Type MC Metric Wiring Duct
PAGES B10/B11
Narrow finger and slot
design for high-density
terminal blocks. Metric sizing
with DIN style mounting hole
pattern meets European
specifications.
5 Type D Flush Cover Round Hole Wiring Duct
Special
Environment
Voice &
Data
Tools &
Accessories
PAGES B8/B9
Round hole design allows the
positioning of wires at various
heights when transitioning
from the duct. Flush cover
design for increased capacity
and superior aesthetics.
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B3
Wiring Duct Control Panel
Overview
PANDUCT ® Type G — Wide Slot Wiring Duct
• Wide slot/finger design provides greater sidewall rigidity and can
be used with a wide range of wire bundle sizes
• Made of rigid PVC
• UL Recognized continuous use temperature: 50°C (122°F)
• UL94 Flammability Rating of V-0
• Provided with mounting holes
• Conforms with NFPA 79-2002 section 14.3.1 requirement for
flame retardant material
Control
Panel
Duct Size W x H
Special
Environment
• nonmetallic, non-flame
propagating CDS
• medium impact resistance
• 331 temperature classification
• cover removal without tools
Voice &
Data
W
H
Tools &
Accessories
Technical
Info
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12, E13
Dimensions
F2
Wirefill Guide
F8
Material
Specifications
F13
Tools & Accessories D11, D12,
Section E
Installation Tips
Index
F15
Part Number
In.
mm
G.5X.5LG6
G.5X1LG6
G.5X2LG6
G.5X4LG6
G.75X.75LG6
G.75X1LG6
G.75X1.5LG6
G.75X2LG6
G1X1LG6
G1X1.5LG6
G1X2LG6
G1X3LG6
G1X4LG6
G1.5X1LG6
G1.5X1.5LG6
G1.5X2LG6
G1.5X3LG6
G1.5X4LG6
G2X1LG6
G2X1.5LG6
G2X2LG6
G2X3LG6
G2X4LG6
G2X5LG6
G2.5X3LG6
G3X1LG6
G3X2LG6
G3X3LG6
G3X4LG6
G3X5LG6
G4X1.5LG6
G4X2LG6
G4X3LG6
G4X4LG6
G4X5LG6
G6X4LG6
.69 x .60
.69 x 1.06
.69 x 2.03
.69 x 4.10
.93 x .82
.93 x 1.06
.93 x 1.57
.93 x 2.03
1.26 x 1.12
1.26 x 1.62
1.26 x 2.12
1.26 x 3.12
1.26 x 4.10
1.75 x 1.12
1.75 x 1.62
1.75 x 2.12
1.75 x 3.12
1.75 x 4.10
2.25 x 1.12
2.25 x 1.62
2.25 x 2.12
2.25 x 3.12
2.25 x 4.10
2.25 x 5.10
2.75 x 3.12
3.25 x 1.12
3.25 x 2.12
3.25 x 3.12
3.25 x 4.10
3.25 x 5.10
4.25 x 1.62
4.25 x 2.12
4.25 x 3.12
4.25 x 4.10
4.25 x 5.10
6.25 x 4.15
17.5 x 15.2
17.5 x 26.9
17.5 x 51.6
17.5 x 104.1
23.6 x 20.8
23.6 x 26.9
23.6 x 39.9
23.6 x 51.6
32.0 x 28.4
32.0 x 41.1
32.0 x 53.8
32.0 x 79.2
32.0 x 104.1
44.5 x 28.4
44.5 x 41.1
44.5 x 53.8
44.5 x 79.2
44.5 x 104.1
57.2 x 28.4
57.2 x 41.1
57.2 x 53.8
57.2 x 79.2
57.2 x 104.1
57.2 x 129.5
69.9 x 79.2
82.6 x 28.4
82.6 x 53.8
82.6 x 79.2
82.6 x 104.1
82.6 x 129.5
108.0 x 41.1
108.0 x 53.8
108.0 x 79.2
108.0 x 104.1
108.0 x 129.5
158.8 x 105.4
Cover
Part
Number
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Length
(ft)
C.5LG6
120
120
120
60
120
6
C.75LG6
120
120
120
120
120
6
C1LG6
120
120
120
120
60
120
6
C1.5LG6
120
120
120
120
60
120
6
120
6
120
6
120
6
120
6
120
6
C2LG6
C2.5LG6
C3LG6
C4LG6
C6LG6
120
120
120
60
60
60
120
120
120
60
60
60
120
60
60
60
60
60
Part Number shown for LG (Light Gray). For other color availability see Color Selection Guide, page F14.
B4
Order number of feet required, in multiples of 6' or Standard Carton Quantity. Base and cover sold separately.
®
PANDUCT ® Wiring Duct
Overview
Non-Slip Cover
Specially Formulated
Lead-Free
Material
Rounded Edges
V-Shaped Slot
Lead-In
Flush Cover
Design
Control
Panel
Wire
Retainer
(page E6)
Restricted Slot Design
Upper Scoreline
Wide
Finger
Design
Lower Scoreline
Features
Advantages
Benefits
Wide finger and slot design
Greater rigidity and larger slot width
Can be used with a wide range of wire and
bundle sizes
Smooth rounded edges
Exclusive PANDUIT ® process rounds the
edges in duct slots and at top of duct fingers
Protects hands and wiring/cabling from abrasion
Non-slip cover (co-extruded
non-slip liner inside duct covers)
Will not slide easily when installed on
duct base
Cover stays in place during shipment,
vibration and when in a vertical orientation,
eliminating rework
Flush cover design
Greater capacity than traditional duct designs
Can potentially use a smaller size wiring duct for
same number of wires
Cover sits flush with sidewall
Provides a neat and finished appearance
Double scoreline
Voice &
Data
Tools &
Accessories
Upper scoreline at base of finger allows fingers Allows quick modification for larger cabling
bundles saving installation time leading to a lower
to be broken out without tools
installed cost
Lower scoreline at base of duct allows sidewall
sections to be removed
Easier to create tee and corner junctions with full
wire carrying capacity
Lead-free
Eliminates health concerns associated with PVC
that contains lead
Provides a smooth burr-free edge when
sidewalls or fingers are broken out
Eliminates the need to deburr saving
installation time
V-shaped slot lead-in
V-shape funnels wires into slot for
easier insertion
Speeds wire installation
Restricted slot design
Once inserted wires are retained in the slot
with or without the cover being installed
Eliminates hassle and saves time during
installation and maintenance
Specially formulated material
Special
Environment
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B5
Wiring Duct Control Panel
Overview
PANDUCT ® Type F — Narrow Slot Wiring Duct
• Narrow slot/finger design provides more slots to closer fit the
spacing of high-density terminal blocks and other hardware
• Made of rigid PVC
• UL Recognized continuous use temperature: 50°C (122°F)
• UL94 Flammability Rating of V-0
• Provided with mounting holes
• Conforms with NFPA 79-2002 section 14.3.1 requirement for
flame retardant material
Control
Panel
Special
Environment
Part Number
• nonmetallic, non-flame
propagating CDS
• medium impact resistance
• 331 temperature classification
• cover removal without tools
Voice &
Data
.20
(5.0)
.50
(12.7)
Tools &
Accessories
W
H
Technical
Info
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12, E13
Dimensions
F3
Wirefill Guide
F8
Material
Specifications
F13
Duct Size W x H
In.
mm
Cover
Part
Number
F.5X.5LG6
F.5X1LG6
F.75X.75LG6
F.75X1.5LG6
F1X1LG6
F1X1.5LG6
F1X2LG6
F1X3LG6
F1X4LG6
F1.5X1LG6
F1.5X1.5LG6
F1.5X2LG6
F1.5X3LG6
F1.5X4LG6
F2X1LG6
F2X1.5LG6
F2X2LG6
F2X3LG6
F2X4LG6
F2X5LG6
.69 x .60
.69 x 1.06
.93 x .82
.93 x 1.57
1.26 x 1.12
1.26 x 1.62
1.26 x 2.12
1.26 x 3.12
1.26 x 4.10
1.75 x 1.12
1.75 x 1.62
1.75 x 2.12
1.75 x 3.12
1.75 x 4.10
2.25 x 1.12
2.25 x 1.62
2.25 x 2.12
2.25 x 3.12
2.25 x 4.10
2.25 x 5.10
17.5 x 15.2
17.5 x 26.9
23.6 x 20.8
23.6 x 39.9
32.0 x 28.4
32.0 x 41.1
32.0 x 53.8
32.0 x 79.2
32.0 x 104.1
44.5 x 28.4
44.5 x 41.1
44.5 x 53.8
44.5 x 79.2
44.5 x 104.1
57.2 x 28.4
57.2 x 41.1
57.2 x 53.8
57.2 x 79.2
57.2 x 104.1
57.2 x 129.5
F3X1LG6
F3X2LG6
F3X3LG6
F3X4LG6
F3X5LG6
F4X2LG6
F4X3LG6
F4X4LG6
F4X5LG6
3.25
3.25
3.25
3.25
3.25
4.25
4.25
4.25
4.25
82.6 x 28.4
82.6 x 53.8
82.6 x 79.2 C3LG6
82.6 x 104.1
82.6 x 129.5
108.0 x 53.8
108.0 x 79.2
C4LG6
108.0 x 104.1
108.0 x 129.5
x
x
x
x
x
x
x
x
x
1.12
2.12
3.12
4.10
5.10
2.12
3.12
4.10
5.10
B6
Installation Tips
Length
(ft)
C.5LG6
120
120
120
6
C.75LG6
120
120
120
6
C1LG6
120
120
120
120
60
120
6
C1.5LG6
120
120
120
120
60
120
6
C2LG6
120
120
120
60
60
60
120
6
120
120
60
60
60
120
6
60
60
60
60
120
6
Part Number shown for LG (Light Gray). For other color availability see Color Selection Guide, page F14.
Tools & Accessories Section E
Index
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
F15
Order number of feet required, in multiples of 6' or Standard Carton Quantity. Base and cover sold separately.
®
PANDUCT ® Wiring Duct
Overview
Rounded Edges
Double Restricted
Slot Design
Specially Formulated
Lead-Free Material
Non-Slip
Cover Flush Cover
Design
V-Shaped Slot
Lead-In
Control
Panel
Narrow
Finger
Design
Upper Scoreline
Lower Scoreline
Features
Advantages
Benefits
Narrow finger and slot design
Provides closer spacing for use with
high-density applications
Allows further fanning of wires for neater wire
management in high-density control panels
Smooth rounded edges
Exclusive PANDUIT ® process rounds the
edges in duct slots and at top of duct fingers
Protects hands and wiring/cabling from abrasion
Non-slip cover (co-extruded
non-slip liner inside duct covers)
Will not slide easily when installed on
duct base
Cover stays in place during shipment,
vibration and when in a vertical orientation,
eliminating rework
Flush cover design
Greater capacity than traditional duct designs
Can potentially use a smaller size wiring duct for
same number of wires
Cover sits flush with sidewall
Provides a neat and finished appearance
Double scoreline
Voice &
Data
Tools &
Accessories
Upper scoreline at base of finger allows fingers Allows quick modification for larger cabling
bundles saving installation time leading to a lower
to be broken out without tools
installed cost
Lower scoreline at base of duct allows
complete side wall sections to be removed
Easier to create tee and corner junctions with full
wire carrying capacity
Lead-free
Eliminates health concerns associated with PVC
that contains lead
Provides a smooth burr-free edge when
sidewalls or fingers are broken out
Eliminates the need to deburr saving
installation time
V-shaped slot lead-in
V-shape funnels wires into slot for
easier insertion
Speeds wire installation
Double restricted slot design
Once inserted wires are retained in the slot
with or without the cover being installed
Eliminates hassle and saves time during
installation and maintenance
Specially formulated material
Special
Environment
Second restriction retains cabling within top or Provides a neat and finished appearance
bottom portion of slot in larger wiring duct sizes
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Technical
Info
Index
B7
Wiring Duct Control Panel
Overview
PANDUCT ® Type D — Flush Cover Round Hole
Wiring Duct
• Round hole design has multiple rows of holes to retain and support
wire at variable heights and positions
• Made of rigid PVC
• UL Recognized continuous use temperature: 50°C (122°F)
• UL94 Flammability Rating of V-0
• Provided with mounting holes
• Conforms with NFPA 79-2002 section 14.3.1 requirement for flame
retardant material
Control
Panel
Special
Environment
Part Number
• nonmetallic, non-flame
propagating CDS
• medium impact resistance
• 331 temperature classification
Voice &
Data
• cover removal without tools
W
Tools &
Accessories
Technical
Info
H
D1X2LG6
D1X3LG6
D1X4LG6
D1.5X2LG6
D1.5X3LG6
D1.5X4LG6
D2X2LG6
D2X3LG6
D2X4LG6
D2.5X3LG6
D3X2LG6
D3X3LG6
D3X4LG6
D4X2LG6
D4X3LG6
D4X4LG6
Duct Size W x H
In.
mm
1.26
1.26
1.26
1.75
1.75
1.75
2.25
2.25
2.25
2.75
3.25
3.25
3.25
4.25
4.25
4.25
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
2.12
3.12
4.10
2.12
3.12
4.10
2.12
3.12
4.10
3.12
2.12
3.12
4.10
2.12
3.12
4.10
32.0 x 53.8
32.0 x 79.2
32.0 x 104.1
44.5 x 53.8
44.5 x 79.2
44.5 x 104.1
57.2 x 53.8
57.2 x 79.2
57.2 x 104.1
69.9 x 79.2
82.6 x 53.8
82.6 x 79.2
82.6 x 104.1
108.0 x 53.8
108.0 x 79.2
108.0 x 104.1
Cover
Part
Number
Length
(ft)
C1LG6
120
120
60
120
6
C1.5LG6
120
120
60
120
6
120
6
C2LG6
C2.5LG6
120
60
60
120
120
6
C3LG6
120
60
60
120
6
C4LG6
60
60
60
120
6
Part Number shown for LG (Light Gray). For other color availability see Color Selection Guide, page F14.
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12
Dimensions
F2
Wirefill Guide
F8
Material
Specifications
F13
Tools & Accessories Section E
Installation Tips
F15
Index
B8
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Order number of feet required, in multiples of 6' or Standard Carton Quantity. Base and cover sold separately.
®
PANDUCT ® Wiring Duct
Overview
Non-Slip Cover
Rounded Edges
Flush Cover
Design
Specially Formulated
Lead-Free
Material
Control
Panel
Round
Hole
Design
Special
Environment
Base Scoreline
Features
Advantages
Benefits
Round hole design
Retains and supports wires at variable heights Superior aesthetics and wire management
and positions with or without the cover installed
Flush cover design
Greater capacity than traditional duct designs
Can potentially use a smaller size wiring duct for
same number of wires
Cover sits flush with sidewall
Provides a neat and finished appearance
Non-slip cover (co-extruded
non-slip liner inside duct covers)
Will not slide easily when installed on
duct base
Cover stays in place during shipment,
vibration and when in a vertical orientation,
eliminating rework
Smooth rounded edges
Exclusive PANDUIT ® process rounds the
edges of punched holes
Protects hands and wiring/cabling from abrasion
Specially formulated material
Lead-free
Eliminates health concerns associated with PVC
that contains lead
Provides a smooth burr-free edge when
sidewalls are broken out
Eliminates the need to deburr saving
installation time
Scoreline at base of duct allows sidewall
sections to be removed
Easier to create tee and corner junctions with full
wire carrying capacity
Base scoreline
Voice &
Data
Tools &
Accessories
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B9
Wiring Duct Control Panel
Overview
PANDUCT ® Type MC — Metric Narrow Slot Wiring Duct
• CE compliant and metric sizing for control panels intended for
European applications
• Made of rigid PVC
• UL Recognized continuous use temperature: 50°C (122°F)
• UL94 Flammability Rating of V-0
• Provided with DIN 43 659 mounting holes
• Duct and cover packaged together in 2 meter lengths
• Conforms with NFPA 79-2002 section 14.3.1 requirement for
flame retardant material
Control
Panel
Special
Environment
Part Number
• nonmetallic, non-flame
propagating CDS
• medium impact resistance
• 331 temperature classification
• cover removal without tools
Voice &
Data
5.0
(.20)
12.5
(.49)
Tools &
Accessories
W
H
MC25X25IG2
MC25X37IG2
MC25X50IG2
MC25X62IG2
MC25X75IG2
MC37X37IG2
MC37X50IG2
MC37X62IG2
MC37X75IG2
MC50X50IG2
MC50X75IG2
MC50X100IG2
MC62X37IG2
MC62X62IG2
MC75X50IG2
MC75X62IG2
MC75X75IG2
MC75X100IG2
MC100X50IG2
MC100X62IG2
MC100X75IG2
MC100X100IG2
Duct Size W x H
mm
In.
24.6
24.6
24.6
24.6
24.6
37.1
37.1
37.1
37.1
49.5
49.5
49.5
62.0
62.0
74.7
74.7
74.7
74.7
99.6
99.6
99.6
99.6
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
23.6
35.8
47.8
59.7
72.4
35.8
47.8
59.7
72.4
47.8
72.4
97.8
35.8
59.7
48.0
59.7
72.4
97.8
48.0
59.7
72.4
97.8
Available in IG (International Gray) only.
Technical
Info
Index
B10
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12
Dimensions
F4
Wirefill Guide
F9
Material
Specifications
F13
Tools & Accessories Section E
Installation Tips
F15
Order number of pieces required, in multiples of Standard Package Quantity.
.97 x .93
.97 x 1.41
.97 x 1.88
.97 x 2.35
.97 x 2.85
1.46 x 1.41
1.46 x 1.88
1.46 x 2.35
1.46 x 2.85
1.95 x 1.89
1.95 x 2.85
1.95 x 3.85
2.44 x 1.41
2.44 x 2.35
2.94 x 1.89
2.94 x 2.35
2.94 x 2.85
2.94 x 3.85
3.92 x 1.89
3.92 x 2.35
3.92 x 2.85
3.92 x 3.85
Replacement
Duct
Cover
Cover Part
Std. Ctn. Std. Ctn.
Number
Qty.
Qty.
Length
(M)
C25IG2
20
20
20
20
20
20
2
C37IG2
20
20
20
20
20
2
C50IG2
20
10
10
20
2
C62IG2
20
20
20
2
C75IG2
20
20
10
10
20
2
C100IG2
10
10
10
10
20
2
®
PANDUCT ® Wiring Duct
Overview
Non-Slip Cover
Double Restricted
Slot Design
V-Shaped Slot Lead-In
Control
Panel
Specially Formulated
Lead-Free
Material
Rounded
Edges
Narrow
Finger
Design
Metric
Finger Width
and
Progression
Special
Environment
Lower Scoreline
Upper Scoreline
Features
Metric size and finger progression
Advantages
DIN Mounting Hole Pattern
Benefits
Slot width and pitch may match more closely to Provides a metric sized wiring duct solution for
components with metric dimensions
applications that specify metric dimensioning,
such as when exporting equipment to
European countries
Narrow finger and slot design
Provides closer spacing for use with
high-density applications
Allows further fanning of wires for neater wire
management in high-density control panels
DIN 43 659 mounting hole pattern
Provides the required mounting hole pattern
for use in cabinets which are designed to
these standards
Meets European standards for use in
cabinet applications
Smooth rounded edges
Exclusive PANDUIT ® process rounds the
edges in duct slots and at top of duct fingers
Protects hands and wiring/cabling from abrasion
Double scoreline
Upper scoreline at base of finger allows fingers Allows quick modification for larger cabling
bundles saving installation time leading to a lower
to be broken out without tools
installed cost
Lower scoreline at base of duct allows sidewall
sections to be removed
Easier to create tee and corner junctions with full
wire carrying capacity
Lead-free
Eliminates health concerns associated with PVC
that contains lead
Provides a smooth burr-free edge when
sidewalls or fingers are broken out
Eliminates the need to deburr saving
installation time
Non-slip cover (co-extruded
non-slip liner inside duct covers)
Will not slide easily when installed on
duct base
Cover stays in place during shipment,
vibration and when in a vertical orientation,
eliminating rework
Flush cover design
Greater capacity than traditional duct designs
Can potentially use a smaller size wiring duct for
same number of wires
Cover sits flush with sidewall
Provides a neat and finished appearance
Once inserted wires are retained in the slot
with or without the cover being installed
Eliminates hassle and saves time during
installation and maintenance
Specially formulated material
Double restricted slot design
Voice &
Data
Tools &
Accessories
Technical
Info
Index
Second restriction retains cabling within top or Provides a neat and finished appearance
bottom portion of slot in larger wiring duct sizes
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B11
Wiring Duct Control Panel
Overview
PANDUCT ® Type H — Hinged Cover Wiring Duct
•
•
•
•
Made of rigid PVC
UL Recognized continuous use temperature: 50°C (122°F)
UL94 Flammability Rating of V-0
Provided with mounting holes
Control
Panel
Duct Size WxH
Special
Environment
Voice &
Data
Part Number
H1.5X2LG6
H1.5X3LG6
H2X2LG6
H2X3LG6
H2X4LG6
H3X3LG6
H3X4LG6
H4X4LG6
H
In.
mm
1.75 x 1.98
1.75 x 3.06
2.17 x 1.98
2.17 x 3.06
2.17 X 4.10
3.25 x 3.06
3.25 x 4.10
4.25 x 4.10
44.5 x 50.3
44.5 x 77.7
55.1 x 50.3
55.1 x 77.7
55.1 X 104.1
82.6 x 77.7
82.6 x 104.1
108.0 x 104.1
Cover
Part
Number
HC1.5LG6
HC1.5LG6
HC2LG6
HC2LG6
HC2LG6
HC3LG6
HC3LG6
HC4LG6
Available in BL (Black), LG (Light Gray) and WH (White).
W
Tools &
Accessories
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12
Dimensions
F7
Wirefill Guide
F9
Material
Specifications
F13
Tools & Accessories D11, D12,
Section E
Installation Tips
F15
Technical
Info
Index
B12
Order number of feet required, in multiples of 6' or Standard Carton Quantity. Base and cover sold separately.
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
120
120
120
60
60
60
60
60
120
120
120
120
120
120
120
60
Length
(ft)
6
6
6
6
6
6
6
6
Wiring Duct for Special Environments
Overview
PANDUIT ® offers a selection of special materials in PANDUCT ® Wiring Duct for
routing and concealing wiring in special use environments. Special use environments
include applications such as transportation, oil and gas platforms, nuclear power plants
Control
Panel
Environment/Material Specifications
and semiconductor and electronics manufacturing.
Some of the features and benefits found in PANDUCT ®
Wiring Duct types for special environments include:
Special
Environment
Specialty materials will not release toxic or
corrosive gases that could endanger public safety or
damage sensitive electronics, and exhibits excellent
flame retardance
Flush cover design to maximize capacity over the
channel footprint and provide a neater appearance
Voice &
Data
Integrated non-skid liner insures the duct cover will
not slide once installed or during vibration
Smooth corners and edges will not abrade cabling or
irritate hands
UL Recognized as meeting the requirements of
UL Standard 1565 for Positioning Devices
Tools &
Accessories
CE compliant for panels that are to be exported
to Europe
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
C1
Wiring Duct for Special Environments
Overview
Control
Panel
Type NNC Halogen Free Metric Wiring Duct
Halogen free material is nontoxic, lead-free,
environmentally safe and will not release toxic
or corrosive gases that could endanger public
safety or damage sensitive electronic equipment
Special
Environment
UL94V-0
Data &
Voice
Type NE NORYL* Halogen Free Wiring Duct
Halogen free material is nontoxic, lead-free,
environmentally safe and will not release toxic
or corrosive gases that could endanger public
safety or damage sensitive electronic equipment
UL94V-1
Tools &
Accessories
Type TMC Low Smoke/Low Toxicity Wiring Duct
Low smoke/Low toxicity material emits a low
level of toxic fumes and low smoke emissions
when burned
Technical
Info
Meets Federal Rail Administration Guidelines and
NFPA 130 requirements for all transit vehicles
UL94V-0
Index
The material is
self-extinguishing and
has excellent flame
retardancy UL94V-0.
*NORYL is a registered trademark of General Electric Company.
C2
The material does
not release dense
smoke when burned
per ASTM E662 test
method.
The material does
not emit a high
volume of toxic gases
when burned per
Boeing and Airbus
test methods.
Overview
Control
Panel
Environment/Material Specifications
Typical Applications
PAGES
C4/C5
Semiconductor Manufacturing
Ship Building
Nuclear Power Plants
Oil Platforms
Environment/Material Specifications
Typical Applications
Special
Environment
PAGES
C6/C7
Data &
Voice
Semiconductor Manufacturing
Ship Building
Nuclear Power Plants
Oil Platforms
Tools &
Accessories
Environment/Material Specifications
Typical Applications
PAGES
C8/C9
Passenger Rail Cars
Other Transportation Vehicles
Technical
Info
The material contains
no fluorine, bromide
or chlorine and will not
emit any corrosive or
toxic gases when
burned per IEC 60754-2
test method.
Material is rated
for a continuous use
temperature above
75˚ C (167˚ F).
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
C3
Wiring Duct Special Environments
Overview
PANDUCT ® Type NNC — Halogen Free Metric Wiring Duct
• Made of halogen free material and verified with IEC 60754-2
test method (test on gases evolved during combustion of
electric cables)
• UL Recognized continuous use temperature: 95°C (203°F)
• UL94 Flammability Rating of V-0
• Conforms with NFPA 79-2002 section 14.3.1 requirement for
flame retardant material
• Provided with DIN 43 659 mounting holes
• Metric sizing and finger progression
• Duct and cover packaged together in 2 meter lengths
Control
Panel
Special
Environment
Duct Size WxH
mm
In.
Part Number
• nonmetallic, non-flame
propagating CDS
• medium impact resistance
• 211 temperature classification
• cover removal without tools
Data &
Voice
W
H
NNC25X25LG2
NNC25X37LG2
NNC25X50LG2
NNC25X75LG2
NNC37X37LG2
NNC37X50LG2
NNC37X75LG2
NNC50X50LG2
NNC50X75LG2
NNC50X100LG2
NNC75X75LG2
NNC100X50LG2
NNC100X75LG2
NNC100X100LG2
24.6
24.6
24.6
24.6
37.1
37.1
37.1
49.5
49.5
49.5
74.7
99.6
99.6
99.6
Technical
Info
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12
Dimensions
F5
Wirefill Guide
F9
Material
Specifications
F13
Tools and
Accessories
Installation Tips
C4
23.6
35.8
47.8
72.4
35.8
47.8
72.4
47.8
72.4
97.8
72.4
47.8
72.4
97.8
.97 x .93
.97 x 1.41
.97 x 1.88
.97 x 2.85
1.46 x 1.41
1.46 x 1.88
1.46 x 2.85
1.95 x 1.88
1.95 x 2.85
1.95 x 3.85
2.94 x 2.85
3.92 x 1.88
3.92 x 2.85
3.92 x 3.85
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Length
(M)
NC25LG2
20
20
20
20
20
20
20
20
2
NC37LG2
20
20
20
20
20
20
2
20
10
10
10
20
20
20
20
10
10
10
20
20
20
NC50LG2
NC75LG2
NC100LG2
2
2
2
Available in LG (Light Gray) and WH (White).
Do not allow cutting, tapping or cleaning fluids that contain hydrocarbons to come in contact with Type NNC
Wiring Duct as it will cause stress cracking. See page F15 for a list of chemicals to avoid.
Tools &
Accessories
Index
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Replacement
Cover Part
Number
E9, E10,
E13, E14
F15
Order number of meters required, in multiples of Standard Carton Quantity.
®
PANDUCT ® Wiring Duct
Overview
Rounded Edges
V-Shaped Slot Lead-In
Halogen Free
Non-Slip
Cover Liner
Restricted Slots
Control
Panel
Specially Formulated
Halogen Free
Material
Metric Finger
Width and
Progression
Special
Environment
Upper Scoreline
Features
Lower Scoreline
Advantages
Benefits
Material is nontoxic, lead-free, environmentally
safe and will not release toxic or corrosive
gases that could endanger public safety or
damage sensitive electronics
Ideal for application where public safety during a
fire is a concern
Greater resistance to heat than PVC
Suitable for panel applications where high
temperatures exist
UL94V-0 material flame rating
The V-0 flammability rating exceeds the rating
of most other halogen free duct materials
Material is self-extinguishing and exhibits the
highest flame retardance meeting more electrical
panel applications
Halogen free non-slip cover liner
Cover will not slide easily when installed on
duct base
Cover stays in place during shipment,
vibration and when in a vertical orientation,
eliminating rework
Co-extruded liner made from halogen
free material
Liner will not emit corrosive or toxic gases
DIN 43 659 mounting hole pattern
Provides the required mounting hole pattern
for use in cabinets which are designed to
these standards
Meets European standards for use in
cabinet applications
Smooth rounded edges
Exclusive PANDUIT ® process rounds the
edges in duct slots and at top of duct fingers
Protects hands and wiring/cabling from abrasion
Double scoreline
Upper scoreline at base of finger allows fingers Allows quick modification for larger cabling
bundles saving installation time leading to a lower
to be broken out without tools
installed cost
Halogen free modified
PPO material
Material is recyclable and suitable for applications
requiring eco-friendly materials
Lower scoreline at base of duct allows sidewall
sections to be removed
Easier to create tee and corner junctions with full
wire carrying capacity
V-shaped slot lead-in
V-shape funnels wires into slot for
easier insertion
Speeds wire installation
Double restricted slot design
Once inserted wires are retained in the slot
with or without the cover being installed
Eliminates hassle and saves time during
installation and maintenance
Second restriction retains cabling within top
or bottom portion of slot in larger wiring
duct sizes
Provides a neat and finished appearance
Duct and cover packaged together
Fewer part numbers to stock and manage
Reduced inventory cost
Metric size and finger progression
Slot width and pitch may match more closely to Provides a metric sized wiring duct solution for
components with metric dimensions
applications that specify metric dimensioning,
such as when exporting equipment to
European countries
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Voice &
Data
Tools &
Accessories
Technical
Info
Index
C5
Wiring Duct Special Environments
Overview
PANDUCT ® Type NE — NORYL* Halogen Free Wiring Duct
• Made of halogen free NORYL* material
• UL94 Flammability Rating of V-1
• Provided with mounting holes
Control
Panel
Special
Environment
Part Number
• nonmetallic, non-flame
propagating CDS
• medium impact resistance
• 211 temperature classification
• cover removal without tools
Data &
Voice
Tools &
Accessories
W
H
Technical
Info
Index
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12, E13
Dimensions
F6
Wirefill Guide
F10
Material
Specifications
F13
Tools and
Accessories
Section E
Installation Tips
F15
Duct Size W x H
In.
mm
NE.5X.5WH6
NE.5X1WH6
NE1X1WH6
NE1X1.5WH6
NE1X2WH6
NE1X3WH6
NE1X4WH6
NE1.5X1.5WH6
NE1.5X2WH6
NE1.5X3WH6
NE1.5X4WH6
NE2X1WH6
NE2X2WH6
NE2X3WH6
NE2X4WH6
NE2.5X3WH6
NE3X1WH6
NE3X2WH6
NE3X3WH6
NE3X4WH6
NE3X5WH6
.63 x .56
.63 x 1.06
1.14 x 1.06
1.14 x 1.62
1.14 x 2.06
1.14 x 3.06
1.14 x 4.06
1.64 x 1.62
1.64 x 2.06
1.64 x 3.06
1.64 x 4.06
2.14 x 1.06
2.14 x 2.06
2.14 x 3.06
2.14 x 4.06
2.64 x 3.06
3.14 x 1.06
3.14 x 2.06
3.14 x 3.06
3.14 x 4.06
3.14 x 5.06
16.0 x 14.2
16.0 x 26.9
29.0 x 26.9
29.0 x 41.1
29.0 x 52.3
29.0 x 77.7
29.0 x 103.1
41.7 x 41.1
41.7 x 52.3
41.7 x 77.7
41.7 x 103.1
54.4 x 26.9
54.4 x 52.3
54.4 x 77.7
54.4 x 103.1
67.1 x 77.7
79.8 x 26.9
79.8 x 52.3
79.8 x 77.7
79.8 x 103.1
79.8 x 128.5
NE4X2WH6
NE4X3WH6
NE4X4WH6
NE4X5WH6
4.14
4.14
4.14
4.14
2.06
3.06
4.06
5.06
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Length
(ft)
NC.5WH6
120
120
120
6
NC1WH6
120
120
120
120
60
120
6
NC1.5WH6
120
120
120
60
120
6
120
6
NC2WH6
NC2.5WH6
120
120
60
60
120
120
6
NC3WH6
120
120
60
60
60
120
6
105.2 x 52.3
105.2 x 77.7
NC4WH6
105.2 x 103.1
105.2 x 128.5
60
60
60
60
120
6
Available in WH (White) only.
Do not allow cutting, tapping or cleaning fluids that contain hydrocarbons to come in contact with Type NE
Wiring Duct as it will cause stress cracking. See page F15 for a list of chemicals to avoid.
*NORYL is a registered trademark of General Electric Company.
C6
x
x
x
x
Cover
Part
Number
Order number of pieces required, in multiples of Standard Package Quantity.
®
PANDUCT ® Wiring Duct
Overview
V-Shaped Slot Lead-In
Non-Slip
Cover
Halogen Free
Material
Restricted Slot
Design
Control
Panel
Rounded Edges
Special
Environment
Base Scoreline
Features
Advantages
Benefits
Material is nontoxic, lead-free, environmentally
safe and will not release toxic or corrosive
gases that could endanger public safety or
damage sensitive electronics
Ideal for applications where public safety during a
fire is a concern
Greater resistance to heat than PVC
Suitable for panel applications where high
temperatures exist
Smooth rounded edges
Exclusive PANDUIT ® process rounds the
edges in duct slots and at top of duct fingers
Protects hands and wiring/cabling from abrasion
Non-slip cover (co-extruded
non-slip liner inside duct covers)
Will not slide easily when installed on
duct base
Cover stays in place during shipment,
vibration and when in a vertical orientation,
eliminating rework
Halogen free NORYL* material
Material is recyclable and suitable for applications
requiring eco-friendly materials
Base scoreline
Scoreline at base of duct allows sidewall
sections to be removed
Easier to create tee and corner junctions with full
wire carrying capacity
V-shaped slot lead-in
V-shape funnels wires into slot for
easier insertion
Speeds wire installation
Restricted slot design
Once inserted wires are retained in the slot
with or without the cover being installed
Eliminates hassle and saves time during
installation and maintenance
Voice &
Data
Tools &
Accessories
Technical
Info
Index
*NORYL is a registered trademark of General Electric Company.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
C7
Overview
Wiring Duct Special Environments
PANDUCT ® Type TMC — Low Smoke/Low Toxicity Wiring Duct
•
•
•
•
Made of low smoke, low toxicity and low flammability material
UL Recognized continuous use temperature: 80°C (176°F)
UL94 Flammability Rating of V-0
Conforms with NFPA 79-2002 section 14.3.1 requirement for
flame retardant material
• Provided with DIN 43 659 mounting holes
• Metric sizing and finger progression
• Duct and cover packaged together in 2 meter lengths
Control
Panel
Duct Size W x H
Special
Environment
Part Number
• nonmetallic, non-flame
propagating CDS
• medium impact resistance
• 331 temperature classification
• cover removal without tools
24.6
37.1
49.5
74.7
74.7
99.6
99.6
x
x
x
x
x
x
x
35.8
35.8
48.0
48.0
73.2
48.0
73.2
In.
.97 x 1.41
1.46 x 1.41
1.95 x 1.89
2.94 x 1.89
2.94 x 2.88
3.92 x 1.89
3.92 x 2.88
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Length
(M)
TC25BR2
TC37BR2
TC50BR2
20
20
20
20
20
20
2
2
2
TC75BR2
20
10
20
2
TC100BR2
10
10
20
2
Available in BR (Natural Beige) only.
Data &
Voice
Tools &
Accessories
TMC25X37BR2
TMC37X37BR2
TMC50X50BR2
TMC75X50BR2
TMC75X75BR2
TMC100X50BR2
TMC100X75BR2
mm
Replacement
Cover Part
Number
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12
Dimensions
F4
Wirefill Guide
F9
Material
Specifications
F13
Tools and
Accessories
Section E
Installation Tips
F15
W
H
PANDUCT ® Type TMC — Low Smoke / Low Toxicity Solid Divider Wall
Technical
Info
Index
• TMC Divider Wall can be mounted inside TMC Wiring Duct to create
multiple channels
• Low smoke, low toxicity and low flammability material
• Simply install the divider wall base when mounting the duct and snap the divider wall
onto mounting base (part No. DB-C)
Part Number
For Nominal Duct Height (mm)
Std.
Pkg.
Qty.
TMC50DW2
TMC75DW2
50
75
2
2
Std.
Ctn.
Qty.
Length
(M)
20
20
2
2
NOTE: Must be used with Mounting Base (DB-C) which is sold separately. Install mounting bases to the duct
channel, locate within 2" of each divider wall end and at least every 12" along the length.
C8
Order number of meters required, in multiples of Standard Carton Quantity.
®
PANDUCT ® Wiring Duct
Overview
Rounded Edges
Double Restricted Slot
Control
Panel
V-Shaped Slot
Lead-In
Low Smoke
Low Toxicity
Material
Metric
Finger Width
and
Progression
Special
Environment
Lower Scoreline
Upper Scoreline
Features
Low smoke emission material
Low toxicity material
Low flammability material
Lightweight nonmetallic material
Advantages
Benefits
Low smoke emissions material per ASTM E
662 test method
Meets the Federal Rail Administration Guidelines
and National Fire Protection Agency NFPA 130
standards for Mass Transit OEM applications
Low smoke emissions result in improved
visibility during a fire
Passenger safety in the case of a fire
Material emits a low level of toxic fumes when
burned per Boeing BSS 7239 and Airbus ATS
1000.01 test methods
Meets the low toxicity requirements of many Mass
Transit OEM applications
Emits low levels of toxic fumes when burned
Passenger safety in the case of a fire
Zero flame spread per ASTM E 162
test method
Meets the Federal Rail Administration Guidelines
and National Fire Protection Agency NFPA 130
standards for Mass Transit OEM applications
Material maintains a UL94V-0
flammability rating
Material is self-extinguishing and exhibits excellent
flame retardance
Excellent fire resistance
Passenger safety in the case of a fire
Material is 40% lighter than aluminum
Contributes to a reduction in vehicle weight
lending to energy savings
Easier to handle than metal channel and can
be field cut and installed
Reduces installer fatigue and simplifies installation
steps leading to a lower installed cost
Cuts leave smooth, burr-free edges
Eliminates need to deburr cut edges simplifying
installation and reducing concern of wire abrasion
Nonconductive
Grounding and bonding of the channel is not
required simplifying installation
Non-slip cover (co-extruded nonslip liner inside duct covers)
Will not slide easily when installed on
duct base
Cover stays in place during shipment,
vibration and when in a vertical orientation,
eliminating rework
Smooth rounded edges
Exclusive PANDUIT ® process rounds the
edges in duct slots and at top of duct fingers
Protects hands and wiring/cabling from abrasion
Double scoreline
Upper scoreline at base of finger allows fingers Allows quick modification for larger cabling
bundles saving installation time leading to a lower
to be broken out without tools
installed cost
Lower scoreline at base of duct allows sidewall
sections to be removed
Voice &
Data
Tools &
Accessories
Technical
Info
Index
Easier to create tee and corner junctions with full
wire carrying capacity
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
C9
Overview
Wiring Duct Special Environments
Notes
Control
Panel
Special
Environment
Data &
Voice
Tools &
Accessories
Technical
Info
Index
C10
Wiring Duct for Voice & Data Applications
Overview
PANDUIT ® offers PANDUCT ® Wiring Duct styles specially suited for routing and concealing
cabling in communications applications. Applications include wire management for backboard
mounted voice, data and video applications, cord management near workstations, use
Control
Panel
inside communications cabinets and other general purpose applications.
Some of the features and benefits found in
PANDUCT ® Wiring Duct types for communications
applications include:
Special
Environment
Black color to compliment the look of
telecommunications racks and hardware
PANDUIT ® exclusive wide slot/wide finger
progression and hinging cover provides easy
access ideal for frequent moves, adds and changes
Voice &
Data
Solid wall raceway completely conceals cabling
in applications where frequent breakouts are
not required
Bend radius control accessories for cabling as
required in NFPA 79-2002 section 14.1.4.9 and
TIA/EIA 568-B and 569-A
Tools &
Accessories
Smooth corners and edges that will not abrade
cabling or irritate hands
UL94 flammability rating of V-0 for excellent
flame retardancy
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
D1
Wiring Duct for Backboard Applications
Overview
Control
Panel
1
Special
Environment
Voice &
Data
2
Tools &
Accessories
3
Technical
Info
4
Index
For Cable Management Solutions for Network Racks see page D14.
D2
Overview
1 Type H Hinged Cover Wiring Duct
PAGE D6/D7
Features wide slot/wide
finger progression for
communications cabling.
Provides easy access to
cabling for moves, adds
and changes.
2 Bend Radius Control Corner Strips
PAGE D11
Snap to duct walls at tee
intersections and right
angles to provide cable
protection around corners.
3 Bend Radius Control Trumpet
™
Special
Environment
Voice &
Data
PAGE D11
Provides a smooth
transition from hardware
to duct channel.
4 TAK-TAPE Hook & Loop Strips
Control
Panel
PAGE D13
Secure cable bundles
entering or exiting the wiring
duct. Tape roll allows any
size cable bundle to be
easily secured.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Tools &
Accessories
Technical
Info
Index
D3
Cord Management at the Workstation
Overview
Control
Panel
Special
Environment
2
Voice &
Data
1
3
Tools &
Accessories
4
Technical
Info
Index
®
For information on the complete line of PANDUCT Wiring Duct see page B1
D4
Overview
1 Type H Hinged Cover Wiring Duct
PAGE D6/D7
Contain cable slack at the
workstation. Hinged cover
provides easy access to
cabling for moves, adds
and changes.
2 Wire Retainers
PAGE D12
Contain cabling when
duct cover is opened.
Wire retainers snap easily
between duct fingers.
3 ULTRA-CINCH Hook & Loop Ties
™
TAK-TY Hook & Loop Cable Ties
®
®
Special
Environment
Voice &
Data
PAGE D12
Very easy to release and
reuse, making them ideal for
applications where changes
are anticipated or continuous
access is required.
4 TAK-TY Hook & Loop Cable Tie Mounts
Control
Panel
PAGE D13
Route and secure sensitive
communication cabling
without damaging the cable
bundles. Optional adhesive
backed mounts can be easily
mounted within the wiring
duct base.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Tools &
Accessories
Technical
Info
Index
D5
Wiring Duct Voice & Data
Overview
PANDUCT ® Type H — Hinged Cover Wiring Duct
•
•
•
•
Made of rigid PVC
UL Recognized continuous use temperature: 50°C (122°F)
UL94 Flammability Rating of V-0
Provided with mounting holes
Control
Panel
Duct Size WxH
Special
Environment
Part Number
H1.5X2BL6
H1.5X3BL6
H2X2BL6
H2X3BL6
H2X4BL6
H3X3BL6
H3X4BL6
H4X4BL6
H
Voice &
Data
In.
1.75
1.75
2.17
2.17
2.17
3.25
3.25
4.25
x
x
x
x
x
x
x
x
1.98
3.06
1.98
3.06
4.10
3.06
4.10
4.10
mm
44.5 x 50.3
44.5 x 77.7
55.1 x 50.3
55.1 x 77.7
55.1 x 104.1
82.6 x 77.7
82.6 x 104.1
108.0 x 104.1
Cover
Part
Number
HC1.5BL6
HC1.5BL6
HC2BL6
HC2BL6
HC2BL6
HC3BL6
HC3BL6
HC4BL6
Available in BL (Black), LG (Light Gray) and WH (White).
W
Tools &
Accessories
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12
Dimensions
F7
Wirefill Guide
F9
Material
Specifications
F13
Tools & Accessories D11, D12,
Section E
Technical
Info
Installation Tips
F15
Index
D6
Order number of feet required, in multiples of 6' or Standard Carton Quantity. Base and cover sold separately.
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
120
120
120
60
60
60
60
60
120
120
120
120
120
120
120
60
Length
(ft)
6
6
6
6
6
6
6
6
®
PANDUCT ® Wiring Duct
Overview
Cover Retention Flange
Specially Formulated
Lead-Free Material
Integrated Hinged
Cover Design
Dual-Sided
Hinge
Control
Panel
Rounded Edges
Restricted
Slot Design
Upper Scoreline
Features
Lower Scoreline
Advantages
Benefits
PANDUIT ® exclusive design provides access
to duct channel without the need to completely
remove and reinstall the cover
Covers are less likely to be misplaced maintaining
a neater appearance to the installation
Dual-sided hinge
Cover can hinge open up to 100° from either
sidewall of duct base
Provides full access to the channel without the
need to remove the cover
Cover retention flange
Enables easier cover engagement with
the base
Provides easy snap-on installation
Engages cover securely with base
Cover stays in place during vibration and when in
a vertical orientation, eliminating rework
Allows cover to open and stay in position at
any angle
Cover will function and stay open regardless of
vertical or horizontal position duct is mounted in
Cover removal rib
Provides surface to grip cover
Cover is easy to open or remove
Smooth rounded edges
Exclusive PANDUIT ® process rounds the
edges in duct slots and at top of duct fingers
Protects hands and wiring/cabling from abrasion
Double scoreline
Upper scoreline at base of finger allows fingers Allows quick modification for larger cabling
bundles saving installation time leading to a lower
to be broken out without tools
installed cost
Integrated hinged cover design
Special
Environment
Voice &
Data
Lower scoreline at base of duct allows sidewall
sections to be removed
Easier to create tee and corner junctions with full
wire carrying capacity
Restricted slot design
Once inserted wires are retained in the slot
with or without the cover being installed
Eliminates hassle and saves time during
installation and maintenance
Specially formulated material
Lead-free
Removes health concerns associated with PVC
that contains lead
Provides a smooth burr-free edge when
sidewalls or fingers are broken out
Eliminates the need to deburr saving
installation time
Tools &
Accessories
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
D7
Wiring Duct Voice & Data
Overview
PANDUCT ® Type FS — Solid Wall Raceway
• Solid wall design fully encloses cables providing maximum
protection and aesthetics
• Made of rigid PVC
• UL Recognized continuous use temperature: 50°C (122°F)
• UL94 Flammability Rating of V-0
• Supplied without mounting holes
Control
Panel
Duct Size W x H
Special
Environment
Part Number
In.
mm
> FS.5X.5LG6NM
.69 x .60
.69 x 1.06
.93 x .82
1.26 x 1.12
1.26 x 1.62
1.26 x 2.12
1.26 x 3.12
1.26 x 4.10
1.75 x 1.12
1.75 x 1.62
1.75 x 2.12
1.75 x 3.12
2.25 x 1.12
2.25 x 1.62
2.25 x 2.12
2.25 x 3.12
2.25 x 4.10
3.25 x 1.12
3.25 x 2.12
3.25 x 3.12
3.25 x 4.10
17.5 x 15.2
17.5 x 26.9
23.6 x 20.8
32.0 x 28.4
32.0 x 41.1
32.0 x 53.8
32.0 x 79.2
32.0 x 104.1
44.5 x 28.4
44.5 x 41.1
44.5 x 53.8
44.5 x 79.2
57.2 x 28.4
57.2 x 41.1
57.2 x 53.8
57.2 x 79.2
57.2 x 104.1
82.6 x 28.4
82.6 x 53.8
82.6 x 79.2
82.6 x 104.1
3.25
4.25
4.25
4.25
4.25
6.25
82.6 x 129.5
108.0 x 53.8
108.0 x 79.2
C4LG6
108.0 x 104.1
108.0 x 129.5
158.8 x 105.4 C6LG6
> FS.5X1LG6NM
FS.75X.75LG6NM
• nonmetallic, non-flame
propagating CDS
> FS1X1LG6NM
• medium impact resistance
> FS1X1.5LG6NM
• 331 temperature classification
• cover removal without tools
• IP40 degree of protection
Voice &
Data
>
>
>
>
W
>
>
H
>
Tools &
Accessories
>
>
>
Technical
Info
FS1X2LG6NM
FS1X3LG6NM
FS1X4LG6NM
FS1.5X1LG6NM
FS1.5X1.5LG6NM
FS1.5X2LG6NM
FS1.5X3LG6NM
FS2X1LG6NM
FS2X1.5LG6NM
FS2X2LG6NM
FS2X3LG6NM
FS2X4LG6NM
FS3X1LG6NM
FS3X2LG6NM
FS3X3LG6NM
FS3X4LG6NM
Reference
Page(s)
Color Availability
F14
> FS4X2LG6NM
Adhesive Tape
E12, E13
> FS4X3LG6NM
Dimensions
F3
> FS4X4LG6NM
Wirefill Guide
F8
Material
Specifications
F13
Cover
Part
Number
FS3X5LG6NM
> FS4X5LG6NM
> FS6X4LG6NM
x
x
x
x
x
x
5.10
2.12
3.12
4.10
5.10
4.15
C.5LG6
C.75LG6
120
6
120
6
C1LG6
120
6
C1.5LG6
120
120
120
120
120
6
C2LG6
120
120
120
60
60
120
6
120
6
120
6
120
6
C3LG6
120
120
60
60
60
60
60
60
60
60
>SYMBOL indicates parts available with mounting holes. Remove NM from part number.
Part Number shown for LG (Light Gray). For other color availability see Color Selection Guide, page F15.
F15
Index
D8
120
120
120
Length
(ft)
120
120
120
120
60
Tools & Accessories D11, D12,
Section E
Installation Tips
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Order number of feet required, in multiples of 6' or Standard Carton Quantity. Base and cover sold separately.
®
PANDUCT ® Wiring Duct
Overview
Specially Formulated
Lead-Free
Material
Non-Slip Cover
Solid Wall Design
Control
Panel
Flush Cover
Design
Special
Environment
Scoreline at Base
Features
Advantages
Benefits
Solid wall design
Fully encloses the cables providing
maximum protection
Provides a more aesthetically pleasing solution
for applications that do not require frequent
cable breakouts
Flush cover design
Greater capacity than traditional duct designs
Can potentially use a smaller size wiring duct for
same number of wires
Cover sits flush with sidewall
Provides a neat and finished appearance
Base scoreline
Scoreline at base of duct allows sidewall
sections to be removed
Easier to create tee and corner junctions with full
wire carrying capacity
Non-slip cover (co-extruded
non-slip liner inside duct covers)
Will not slide easily when installed on
duct base
Cover stays in place during shipment,
vibration and when in a vertical orientation,
eliminating rework
Specially formulated material
Lead-free
Eliminates health concerns associated with PVC
that contains lead
Provides a smooth burr-free edge when
sidewalls are broken out
Eliminates the need to deburr saving
installation time
Voice &
Data
Tools &
Accessories
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
D9
Wiring Duct Voice & Data
Overview
PANDUCT ® Type G — Wide Slot Wiring Duct
• Wide selection of sizes available in black color to compliment
the look of telecommunications racks and hardware
• Made of rigid PVC
• UL Recognized continuous use temperature: 50°C (122°F)
• UL94 Flammability Rating of V-0
• Provided with mounting holes
• Conforms with NFPA 79-2002 section 14.3.1 requirement for
flame retardant material
Control
Panel
Special
Environment
Part Number
• nonmetallic, non-flame
propagating CDS
• medium impact resistance
• 331 temperature classification
• cover removal without tools
Voice &
Data
W
H
Tools &
Accessories
Technical
Info
Reference
Page(s)
Color Availability
F14
Adhesive Tape
E12, E13
Dimensions
F2
Wirefill Guide
F8
Material
Specifications
F13
Duct Size W x H
In.
mm
G.75X2BL6
G1X1BL6
G1X1.5BL6
G1X2BL6
G1X3BL6
G1X4BL6
G1.5X1.5BL6
G1.5X2BL6
G1.5X3BL6
G1.5X4BL6
G2X1BL6
G2X2BL6
G2X3BL6
G2X4BL6
G2.5X3BL6
G3X2BL6
G3X3BL6
G3X4BL6
G4X2BL6
G4X3BL6
G4X4BL6
.93 x 2.03
1.26 x 1.12
1.26 x 1.62
1.26 x 2.12
1.26 x 3.12
1.26 x 4.10
1.75 x 1.62
1.75 x 2.12
1.75 x 3.12
1.75 x 4.10
2.25 x 1.12
2.25 x 2.12
2.25 x 3.12
2.25 x 4.10
2.75 x 3.12
3.25 x 2.12
3.25 x 3.12
3.25 x 4.10
4.25 x 2.12
4.25 x 3.12
4.25 x 4.10
23.6 x 51.6
32.0 x 28.4
32.0 x 41.1
32.0 x 53.8
32.0 x 79.2
32.0 x 104.1
44.5 x 41.1
44.5 x 53.8
44.5 x 79.2
44.5 x 104.1
57.2 x 28.4
57.2 x 53.8
57.2 x 79.2
57.2 x 104.1
69.9 x 79.2
82.6 x 53.8
82.6 x 79.2
82.6 x 104.1
108.0 x 53.8
108.0 x 79.2
108.0 x 104.1
G4X5BL6
4.25 x 5.10
108.0 x 129.5
Cover
Part
Number
120
120
6
C1BL6
120
120
120
120
60
120
6
C1.5BL6
120
120
120
60
120
6
120
6
120
6
120
6
120
6
C2BL6
C2.5BL6
C3BL6
C4BL6
120
120
60
60
120
120
60
60
60
60
60
60
Part Number shown for BL (Black). For other color availability see Color Selection Guide, page F14.
F15
Index
D10
Length
(ft)
C.75BL6
Tools & Accessories D11, D12,
Section E
Installation Tips
Duct
Cover
Std. Ctn. Std. Ctn.
Qty.
Qty.
Order number of feet required, in multiples of 6' or Standard Carton Quantity. Base and cover sold separately.
®
PANDUCT ® Wiring Duct
Overview
PANDUCT ® Duct Corner Strip with 1" Bend Radius Control
• Creates a strong rigid corner at wiring duct junctions
• Provides bend radius protection for cabling as required in NFPA 79-2002 section
14.1.4.9 and TIA/EIA 568-B and 569-A
• Available in five pre-cut sizes and 6' lengths that can be cut-to-size to meet any size
requirement
• Easy to install two-piece design
• Compatible with all styles of PANDUIT ® Wiring Duct
• Made of PVC material
Part Number
Part Description
For
Duct Height
In.
mm
Control
Panel
Std. Std.
Pkg. Ctn.
Color Qty. Qty.
6 Foot Lengths for use with all Types of PVC Wiring Duct*
CSC1LG6
Cut-to-size 6 foot corner strip with
a 1" bend radius.
CSC1WH6
CSC1BL6
All sizes
(Cut to
duct
height)
All sizes
(Cut to
duct
height)
Light
Gray
6
120
White
Black
6
6
120
120
Special
Environment
Pre-Cut Pieces for use with all Types of PVC Wiring Duct^
CSPC1LG-Q
1" bend radius corner strip pre-cut
for 1" wall height.
1.00
25.4
Light
Gray
25
250
CSPC1.5LG-Q
1" bend radius corner strip
pre-cut for 1.5" wall height
(2.0" Type H Duct).
1.50
38.1
Light
Gray
25
250
CSPC2LG-Q
1" bend radius corner strip pre-cut
for 2" wall height.
2.00
50.8
Light
Gray
25
250
CSPC3LG-Q
1" bend radius corner strip pre-cut
for 3" wall height.
3.00
76.2
Light
Gray
25
250
CSPC4LG-Q
1" bend radius corner strip
pre-cut for 4" wall height
(4.0" Type H Duct).
4.00
101.6
Light
Gray
25
250
Voice &
Data
*Order number of feet required, in multiples of 6' or Standard Package Quantity.
^Order number of pieces required in multiples of Standard Package Quantity.
Pre-cut pieces available in LG (Light Gray) only.
Tools &
Accessories
Bend Radius Control Trumpet
• Provides method to transition cabling from wall mounted hardware to wiring
duct channel
• Provides bend radius protection for cabling as required in NFPA 79-2002 section
14.1.4.9 and TIA/EIA 568-B and 569-A
• Made of ABS material
Part Number
TRC2BL
TRC4BL
TRC2HDBL
Part Description
For
Duct Height
In.
mm
Std. Std.
Pkg. Ctn.
Qty. Qty.
TRC2BL
Bend radius control trumpet for exiting at
the sidewall of 2" wall heights of Type G or
Type FS Wiring Duct channels.
2.00
50.8
1
10
TRC4BL
Bend radius control trumpet for exiting at
the sidewall of 4" wall heights of Type G or
Type FS Wiring Duct channels.
4.00
101.6
1
10
TRC2HDBL
Bend radius control trumpet for exiting at
the sidewall of 2" wall heights of Type H
Hinged Cover Wiring Duct channels.
2.00
50.8
1
10
Technical
Info
Index
Order number of pieces required in multiples of Standard Package Quantity.
Available in BL (Black) only.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
D11
Overview
Wiring Duct Voice & Data
TAK-TY ® Hook & Loop Cable Ties
Control
Panel
•
•
•
•
•
•
Releasable and reusable hundreds of times
No risk of over-tensioning and damaging high performance cabling
No installation tool needed
Operating temperature range: 0 to 220°F
Several styles (HLS, HLM, HLT, and HLC) available to suit a variety of applications
Select styles (HLSP and HLTP) are UL Listed for use in air handling space
applications per NEC Section 300-22 (C) and (D)
Part Number
Part Description
Max. Bundle
Diameter
In.
mm
Min. Loop
Std. Std.
Tensile
Length Pkg. Ctn.
Str.
(In.) Qty. Qty.
(Lbs.)
15' & 75' Rolls — Can be cut to desired length, eliminating waste
Special
Environment
HLS-15R0
15' roll, .75" width,
Standard, Black.
Various
Various
50
180.0
1
10
HLS-75R0
75' roll, .75" width,
Standard, Black.
Various
Various
50
900.0
1
10
40
12.0
10
100
Loop Ties — Slot allows for pre-wrapping of bundles
HLT3I-X0
Loop tie, 12.0" length,
.50" width,
Intermediate, Black.
3.18
81
All styles may be used with ABMT mounts on page D13.
Minimum 2" overlap required to achieve loop tensile rating.
Voice &
Data
ULTRA-CINCH ™ Hook & Loop Ties
Tools &
Accessories
• Innovative product with hooks and loops on the same side to secure a greater range
of bundle diameters, including smaller bundles
• Low profile cinch ring reduces overall bundle size
• Sturdy brass grommet (UGCTC/UGCTE styles) resists pull-out, and allows cable
bundles to be securely fastened to surfaces
• PANDUIT ® recommends flat-head screws for use in grommet applications
Part Number
Cinch tie, 12" length,
.85" width,
Standard, Black.
3.00
76
50
12.0
10
100
UCT5S-X0
Cinch tie, 18" length,
.85" width,
Standard, Black.
5.00
127
50
18.0
10
100
UGCTE3S-X0
Cinch tie w/end
mount grommet,
12" length, .85" width,
Standard, Black.
3.00
76
50
12.0
10
100
UGCTC5S-X0
Cinch tie w/center
mount grommet,
18" length, .85" width,
Standard, Black.
5.00
127
50
18.0
10
100
All styles may be used with ABMT mounts on page D13.
Minimum 2" overlap required to achieve loop tensile rating.
D12
Min. Loop
Std. Std.
Tensile
Length Pkg. Ctn.
Str.
(In.) Qty. Qty.
(Lbs.)
UCT3S-X0
Technical
Info
Index
Part Description
Max. Bundle
Diameter
In.
mm
Order number of pieces required, in multiples of Standard Package Quantity.
®
PANDUCT ® Wiring Duct
Overview
TAK-TAPE ™ Hook & Loop Strips
• Thin and flexible to quickly wrap around bundle
• Adjustable, releasable and reusable
• Large continuous roll you can cut to size with Telco snips, scissors or PANDUIT ®
cutter (included with TTS-35RX0 only)
• Wide (3/4") black strap spreads out bundling forces over large area
Part Number
Part Description
Control
Panel
Min. Loop
Std. Std.
Tensile
Length Pkg. Ctn.
Str.
(ft)
Qty. Qty.
(Lbs.)
Max. Bundle
Diameter
In.
mm
TTS-20R0
20' roll, .75" width,
Standard, Black,
Reusable case.
Various
Various
40
20
1
10
TTS-35RX0
35' rolls, .75" width,
Standard, Black, 10Pack (shrink-wrapped).
Various
Various
40
35
1
10
Special
Environment
All styles may be used with ABMT mounts shown below
Minimum 2" overlap required to achieve loop tensile rating
Voice &
Data
TAK-TY ® Hook & Loop Cable Tie Mounts
• Used with PANDUIT ® cable ties for a complete wire routing solution
• Adhesive backing allows routing of wires and cables where mounting holes
cannot be drilled
• Tear tab provides fast and easy liner removal to speed installation
• For indoor use
Tools &
Accessories
Color
Height
In.
mm
Length
In.
mm
Width
In.
mm
Max. Static
Load
Mounting
g
Lbs. Method
Used
With
Cable
Ties
Std.
Pkg.
Qty.
Part Number
Material
ABMT-A-C
Nylon 6.6 Natural
.34
8.4
1.10
28.7
1.10
28.6
174
.38
Rubber TAK-TY ® Hook & 100
Adhesive Loop Cable Ties
ABMT-A-C20
Nylon 6.6
.34
8.4
1.10
28.7
1.10
28.6
174
.38
Rubber TAK-TY ® Hook & 100
Adhesive Loop Cable Ties
ABMT-S6-C
Nylon 6.6 Natural
.34
8.4
1.10
28.7
1.10
28.6
—
—
#6 (M3)
Screw
TAK-TY ® Hook & 100
Loop Cable Ties
ABMT-S6-C20
Nylon 6.6
.34
8.4
1.10
28.7
1.10
28.6
—
—
#6 (M3)
Screw
TAK-TY ® Hook & 100
Loop Cable Ties
Black
Black
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
D13
Wiring Duct Voice & Data
Overview
Cable Management Solutions for Network Racks
STANDARD Cable Management Rack System
The Standard in Cable Management
Control
Panel
Features horizontal and vertical cable managers that help organize
and manage cable routing
■
Slotted duct organizes and manages cables for simple moves,
adds and changes
■
Cable pass through holes facilitate routing of cable from front
to rear
■
Patented wire retainers hold cable in place during cable
installation and maintenance
Special
Environment
NETFRAME ® Cable Management Rack System
The Modular Rack Solution
Voice &
Data
Designed to support heavy equipment and network cabling in
telecommunication rooms
■
UL listed for 1500 lbs. load rating to accommodate large
networking equipment
■
Deep vertical channel design provides distribution
cable pathway
■
Multiple vertical cable management options are simple to
install and allow user to configure system to their preferences
Tools &
Accessories
PATCHRUNNER ™ Vertical Cable Management Rack System
Maximum Density Minimum Floor Space
Designed to manage high density cabling while minimizing the area
required for the network layout
Technical
Info
Index
■
Curved cable manager fingers support patch cords as they
transition to vertical pathway, eliminating need for horizontal
cable managers
■
Integral bend radius control on each cable management
finger reduces cable kinks and snags that can harm
network performance
■
Finger spacing aligns with rack spaces simplifying cable routing
■
Slack cable management spools organize patch cord lengths
■
Angled modular patch panel promotes proper bend radius control
For additional information on these and other networking product solutions, request catalog SA-NCCB04.
D14
Wiring Duct Tools and Accessories
Overview
l
Control
Panel
PANDUIT ® offers a selection of PANDUCT ® Tools and Accessories to aid cutting, modifying
and installing wiring duct.
Some of the features and benefits found in PANDUCT ® Tools
and Accessories include:
Special
Environment
Wide selection of hand tools for cutting and
installing wiring duct
Snap-in wire retainers to retain cabling when the cover
is removed, or during cable installation
Divider walls that mount within the duct enabling
multiple channels to be created within a duct channel
Voice &
Data
Corner strips hold corners rigid at tee junctions in
control panel applications
Joining strips to connect two sections of duct and
hold the walls rigid
Mounting clips provide an alternative method to
mount the duct and allow the duct to be more
easily removed
Tools &
Accessories
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
E1
Wiring Duct Accessories for Control Panel Applications
Overview
3
4
Control
Panel
5
2
6
Special
Environment
1
a
Voice &
Data
a For information on the
1 Flexible Wiring Duct
PAGE E4
Tools &
Accessories
Technical
Info
Index
E2
complete line of PANDUCT ®
Wiring Duct see page B1
Flexible one-piece design
routes cabling from the
panel interior over a hinge
to devices on the panel
door surface. Adhesive
backed.
2 Joining Strips
PAGE E8
Attach to sections of duct
to cover the seam and
provide added rigidity to
the channel.
Overview
3 Cable Ties and Mounts
PAGE E11
Control
Panel
Use PANDUIT ® mounts
and cable ties to retain
cable bundles within the
wiring duct channel.
Special
Environment
4 Divider Wall
PAGE E5
Create separate wiring
channels within the wiring
duct base. Available in solid
or slotted wall styles.
5 Wire Retainers
PAGE E6
Install between the duct
fingers to retain cabling
when cover is removed.
Adjustable along finger
length to retain large or
small wire bundles.
6 Corner Strips
Voice &
Data
Tools &
Accessories
Technical
Info
PAGE E8
Create a rigid corner at tee
junctions and right angles.
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
E3
Wiring Duct Tools & Accessories
Overview
PANDUCT ® Type FL — Flexible Wiring Duct
Specifications
• Flexible polypropylene material
• UL Recognized continuous use temperatures up to 65°C (149°F)
• UL94 Flammability Rating of V-2
• Factory applied adhesive tape provided for easy mounting
Control
Panel
Special
Environment
Duct Size WxH
mm
Part Number
W
Features
Advantages
.49 x .49
.98 x .98
1.97 x 1.97
112
70
32
500
Benefits
Flexible
Can be positioned at extreme angles, around
corners and over door hinges
Can be used in applications requiring flexibility
where conventional wiring duct cannot
Fully enclosed
Wrap-around fingers eliminate the need
for a cover
Provides method to retain cables while reducing
number of parts needed to stock
Offset fingers
Allows wires to be fed in easily from the top
and allows wire lead-in from both sides of
the duct
Reduces installation time compared to designs
with overlapping fingers
Tools &
Accessories
Technical
Info
Index
E4
12.5 x 12.5
25.0 x 25.0
50.0 x 50.0
Length
(mm)
Available in LG (RAL 7040 Light Gray) color only.
H
Voice &
Data
FL12X12LG-A
FL25X25LG-A
FL50X50LG-A
In.
Duct
Std. Ctn.
Qty.
Order number of pieces required, in multiples of Standard Carton Quantity.
®
PANDUCT ® Wiring Duct Accessories
Overview
PANDUCT ® Divider Wall
• Wiring duct divider wall can be mounted inside any type of PANDUIT ®
PVC wiring duct to create multiple channels
• Simply install the divider wall base when mounting the duct and snap the
divider wall onto the mounting base accessory (see page E6)
• All versions snap onto DB-C mounting base
• Divider wall heights 2" and greater have a scoreline feature allowing
sections to be removed leaving a smooth edge
• Meets UL508/508A insulation material requirement for barrier
between conductors
Part Number
For Nominal Duct Height (In.)
Std.
Pkg.
Qty.
Control
Panel
Std.
Ctn.
Qty.
Length
(ft)
120
120
120
120
120
6
6
6
6
6
6
6
6
Solid Divider Wall for use with all Types of PVC Wiring Duct
D1H6
D1.5H6
D2H6
D3H6
D4H6
1.00
1.50
2.00
3.00
4.00
6
6
6
6
6
Special
Environment
Slotted Divider Wall for use with all Types of PVC Wiring Duct
SD2H6
SD3H6
SD4H6
Part Number
2.00
3.00
4.00
6
6
6
120
120
120
For Nominal Duct Height (mm)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Length
(M)
2
2
2
40
40
40
2
2
2
Voice &
Data
Metric Solid Divider Wall for use with Type MC Duct
D50H2
D75H2
D100H2
50
75
100
NOTE: Must be used with Mounting Base (DB-C) which is sold separately. Install mounting bases to the duct
channel, locate within 2" of each divider wall end and at least every 12" along the length.
Tools &
Accessories
PANDUCT ® Type TMC Low Smoke/Low Toxicity Solid Divider Wall
• TMC Divider Wall can be mounted inside TMC Wiring Duct to create
multiple channels
• Low smoke, low toxicity and low flammability material
• Simply install the divider wall base when mounting the duct and snap the divider
wall onto mounting base (part No. DB-C)
Part Number
For Nominal Duct Height (mm)
Std.
Pkg.
Qty.
TMC50DW2
TMC75DW2
50
75
2
2
Std.
Ctn.
Qty.
Length
(M)
20
20
2
2
Technical
Info
NOTE: Must be used with Mounting Base (DB-C) which is sold separately. Install mounting bases to the duct
channel, locate within 2" of each divider wall end and at least every 12" along the length.
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
E5
Overview
Wiring Duct Tools & Accessories
PANDUCT ® Mounting Base - Type G, F, FS, D & TMC Wiring Duct
• Installed when mounting duct
• Acts as a shroud around the screw to protect wires from abrasion
Control
Panel
Part Number
DB-C
Part Description
Used with Anchors
PANDUIT ® NR1 or
#8 or #10 screw
Mounting base.
Std. Std.
Pkg. Ctn.
Qty. Qty.
100 1000
12"
Special
Environment
2"
Installing Base —
Install mounting bases to the duct
channel, locate within 2" of each divider wall
end and at least every 12" along the length.
Installing Divider Wall —
Snap the divider wall to the mounting
bases already installed.
PANDUCT ® Type G and Type H Wiring Duct Wire Retainers
• Inserts between fingers of Type G and Type H Wiring Duct to
contain wiring when cover is removed
• Adjustable height
• Made of ABS material
Voice &
Data
For Duct Width
In. (mm)
For Duct Height
In. (mm)
2.00 (50.8)
3.00 (76.2)
4.00 (101.6)
Use with: 3 x 5, 4 x 5 or 6 x 4
2.00 - 4.00 (50.8 - 101.6)
2.00 - 4.00 (50.8 - 101.6)
2.00 - 4.00 (50.8 - 101.6)
Use with: 3 x 5, 4 x 5 or 6 x 4
Part Number
Tools &
Accessories
WR2-C
WR3-C
WR4-C
WR5-C
Std. Std.
Pkg. Ctn.
Qty. Qty.
100
100
100
100
1000
1000
1000
1000
PANDUCT ® Solid Wall Raceway Type FS and Type D Wiring Duct
Wire Retainer
• Mounts onto walls of Type FS Raceway or Type D Wiring Duct with pressure
sensitive adhesive
• One size fits three different duct widths
• Full length is used with 2” wide duct; for small widths, break off segments
at scorelines
• Made of lead-free PVC material
Technical
Info
Part Number
Index
WRS-A-C10
Break off segment
E6
Order number of pieces required, in multiples of Standard Package Quantity.
For Duct Width
In. (mm)
1.00 (25.4)
1.50 (38.1)
2.00 (50.8)
Std. Std.
Pkg. Ctn.
Qty. Qty.
100 1000
®
PANDUCT ® Wiring Duct
Overview
PANDUCT ® Type F, MC & TMC Wiring Duct Wire Retainers/Labeling Device
•
•
•
•
For use with Type F, MC and TMC Duct to contain wiring when cover is removed
FWR-C works with all Type F Duct sizes
FMWR-C works with all Type MC and TMC sizes
Made of rigid PVC material
Control
Panel
In.
mm
Std. Std.
Pkg. Ctn.
Qty. Qty.
1.50 - 4.00
—
—
37 - 100
100 1000
100 1000
For Duct Width
Part Number
FWR-C
FMWR-C
Special
Environment
Wire Retainer —
Snaps onto duct fingers. Full
length for use with 4" wide duct.
For smaller widths, break off
segments at scorelines.
Labeling Outside Duct —
Break off the last segment from wire retainer below (1.5 mark) and snap
onto the back of the remaining segment. Install label & mount between
fingers facing outward.
Voice &
Data
F, MC and TMC Duct Wire Retainers/Labeling Device can be labeled using laser/ink jet computer printable
label C188X030FJJ. For more information on label C188X030FJJ and other PANDUIT ® Identification and
Labeling Solutions, contact PANDUIT ® Customer Service and request the PAN-CODE ® Identification and
Labeling Solutions catalog, SA-101N315C-ID.
Tools &
Accessories
Permanent Marking Pens
• Fast drying permanent ink
• Can be used with write-on labels shown above
PX
Part Number
PFX
Part Description
Std. Std.
Pkg. Ctn.
Qty. Qty.
PX-0
Permanent marking pen, Regular tip, Black ink.
12
144
PX-2
Permanent marking pen, Regular tip, Red ink.
12
144
PFX-0
PFX-2
Permanent marking pen, Fine tip, Black ink.
Permanent marking pen, Fine tip, Red ink.
12
12
144
144
Technical
Info
The TIA/EIA-606-A standard states that all labels shall be mechanically generated. Write-on labels are not
standard compliant.
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
E7
Overview
Wiring Duct Tools & Accessories
PANDUCT ® Duct Corner Strips
• Slides onto duct at corner or tee junctions for smooth, round corners
• Available in five pre-cut sizes and six-foot lengths that can be cut-tosize to meet any size requirement
• Easy to install one-piece design
• Compatible with all styles of PANDUIT ® Wiring Duct
• Made of rigid PVC material
Control
Panel
Part Number
Part Description
For Duct Height
In.
mm
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Light Gray
6
120
6 Foot Lengths for use with all Types of PVC Wiring Duct
Special
Environment
CS1LG6
6 foot length is cut by
user to fit duct height.
Cut-to-size Cut-to-size
Pre-Cut Pieces for use with all Types of PVC Wiring Duct
CSP1LG-Q
CSP1.5LG-Q
CSP2LG-Q
CSP3LG-Q
CSP4LG-Q
Pre-cut pieces are cut
to size.
1.00
25.4
Light Gray
25
250
1.50
2.00
3.00
4.00
38.1
50.8
76.2
101.6
Light
Light
Light
Light
25
25
25
25
250
250
250
250
Gray
Gray
Gray
Gray
Pre-cut pieces available in LG (Light Gray) only.
Voice &
Data
PANDUCT ® Duct Joining Strips
• Slides onto duct to join sections together
• Available in four pre-cut sizes and six-foot lengths that can be
cut-to-size to meet any size requirement
• Easy to install one-piece design
• Compatible with all styles of PANDUIT ® Wiring Duct
• Made of rigid PVC material
Tools &
Accessories
Part Number
Technical
Info
Part Description
For Duct Height
In.
mm
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
6
120
6 Foot Lengths for use with all Types of PVC Wiring Duct
DJS1LG6
DJS1WH6
6 foot length is cut by
user to fit duct height.
Cut to size Cut to size
Light Gray
White
Pre-Cut Pieces for use with all Types of PVC Wiring Duct
DJSP1.5LG-Q
DJSP2LG-Q
DJSP3LG-Q
DJSP4LG-Q
Pre-cut pieces are cut
to size.
Pre-cut pieces available in LG (Light Gray) only.
Index
E8
Order number of pieces required, in multiples of Standard Package Quantity.
1.50
38.1
Light Gray
25
250
2.00
3.00
4.00
50.8
76.2
101.6
Light Gray
Light Gray
Light Gray
25
25
25
250
250
250
®
PANDUCT ® Wiring Duct
Overview
PANDUCT ® Snap-Clip Mounting Bracket — Type G, F, FS, D, MC, NNC &
TMC Wiring Duct
•
•
•
•
•
Part Number
Duct easily snaps into bracket
No mounting holes required in duct
Ensures no metal is inside the duct
Snap-clip spacing is not critical
Simplifies fabrication drawings and panel layout
Screw Required
Control
Panel
For Duct Width
In.
mm
Std. Std.
Pkg. Ctn.
Qty. Qty.
Snap-Clip Mounting Bracket for use with Types G, F, FS & D Duct
S1F-C
S1.5F-C
S2F-C
S3F-C
S4F-C
#8-32
#8-32
#8-32
#8-32
#8-32
x
x
x
x
x
1/4
1/4
1/4
1/4
1/4
(Provided)
(Provided)
(Provided)
(Provided)
(Provided)
1.00
1.50
2.00
3.00
4.00
25.4
38.1
50.8
76.2
101.6
100
100
100
100
100
1000
1000
1000
1000
1000
100
100
100
100
1000
1000
1000
1000
Special
Environment
Snap-Clip Mounting Bracket for use with Types MC, NNC & TMC Duct
SNS25F-C
SNS37F-C
SNS50F-C
SNS62F-C
#8-32
#8-32
#8-32
#8-32
x
x
x
x
1/4
1/4
1/4
1/4
(User
(User
(User
(User
Supplied)
Supplied)
Supplied)
Supplied)
1.00
1.50
2.00
3.00
25.4
38.1
50.8
76.2
Voice &
Data
PANDUCT ® Snap-Clip Mounting Bracket — Type NE Wiring Duct
•
•
•
•
Part Number
SNS.5-C
SNS.75-C
SNS1-C
SNS1.5-C
SNS2-C
SNS3-C
Duct easily snaps into bracket
Ensures no metal is inside the duct
Mounts anywhere along the length of the duct for easy installation
Simplifies fabrication drawings and panel layout
Screw Required
#6-32
#6-32
#8-32
#8-32
#8-32
#8-32
x
x
x
x
x
x
1/4
1/4
1/4
1/4
1/4
1/4
(User
(User
(User
(User
(User
(User
Supplied)
Supplied)
Supplied)
Supplied)
Supplied)
Supplied)
For Duct Width
In.
mm
.50
.75
1.00
1.50
2.00
3.00
12.7
19.1
25.4
38.1
50.8
76.2
Tools &
Accessories
Std. Std.
Pkg. Ctn.
Qty. Qty.
100
100
100
100
100
100
1000
1000
1000
1000
1000
1000
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
E9
Overview
Wiring Duct Tools & Accessories
PANDUCT ® Stud Type Fasteners — For All Duct/Raceway Types
• Secures cover in place during shipping or extreme vibration
• Provides tamper resistance
• Fits into the standard mounting holes available on duct —
NOTE: .200" (5mm) hole must be drilled in the cover to accommodate
the fastener
Control
Panel
Part Number
Special
Environment
Can also be used to mount a smaller
size duct within larger duct to create
a completely separate channel within
a channel
For Duct Height
In.
mm
Std.
Pkg.
Qty.
Part Description
Thread size
F1-C
Corrosion resistant steel
stud with fastener.
10/24 threads
on each end
1.00
25.4
100
F2-C
Corrosion resistant steel
stud with fastener.
10/24 threads
on each end
2.00
50.8
100
F3-C
Corrosion resistant steel
stud with fastener.
10/24 threads
on each end
3.00
76.2
100
F4-C
Corrosion resistant steel
stud with fastener.
10/24 threads
on each end
4.00
101.6
100
Voice &
Data
PAN-TY ® Cable Ties
Tools &
Accessories
Technical
Info
•
•
•
•
Versatile cable ties that can be used in countless applications
One piece construction for consistent performance and reliability
High strength and low thread force
Curved tip makes it easier to pick up from flat surfaces, allows faster initial
threading and speeds installation
• Tie bundle diameters up to 13" (330mm) or join together for
larger diameters
• Material: Natural Nylon 6.6
In.
mm
Maximum
Bundle Diameter
In.
mm
PLT1M-C
PLT2I-C
PLT3I-C
PLT2S-C
4.0
8.0
12.0
8.0
99
203
290
188
.87
2.00
3.00
1.88
22
51
76
48
Miniature
Intermediate
Intermediate
Standard
PLT3S-C
PLT4S-C
12.0
15.0
292
368
3.00
4.00
76
102
Standard
Standard
Length
Part Number
Index
E10
Order number of pieces required, in multiples of Standard Package Quantity.
Cross
Section
Std. Std.
Pkg. Ctn.
Qty. Qty.
100
100
100
100
1000
1000
1000
1000
100 1000
100 1000
®
PANDUCT ® Wiring Duct
Overview
4-Way Adhesive Backed Mounts
•
•
•
•
Superior adhesive for long term reliability
2-up mount configuration speeds liner removal and installation
4-way cable tie entry makes part orientation fast and easy
Adhesive backing allows routing of wires and cables where mounting holes
cannot be drilled
• Used with PANDUIT ® cable ties for a complete wire routing solution
• For indoor use
Used
With
Cable
Ties‡
Std.
Pkg.
Qty.
Material
Color
In.
mm
In.
mm
Max. Static
Width
Load
Adhesive
In.
mm
Lbs.
g
Type
ABMM-A-C
ABS
White
.18
4.6
.75
19.1
.75
19.1
Rubber
.30
136
Adhesive
Backed
M, I
100
ABM2S-A-C
ABS
White
.20
5.1
1.00
25.4
1.00
25.4
Rubber
.50
227
Adhesive
Backed
M, I, S
100
ABM112-A-C
Nylon 6.6
White
.16
4.2
1.12
28.6
1.12
28.6
Rubber
.63
286
Adhesive
Backed
M, I, S
100
Height
Part Number
Length
Mounting
Method
‡ Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy-Standard, LH = Light-Heavy, H = Heavy, HLM = Miniature
TAK-TY ® Hook & Loop Ties.
Control
Panel
Special
Environment
Voice &
Data
Tie Mounts — Mechanically Applied
•
•
•
•
•
Install with a screw or rivet for a strong, secure installation
Available in multiple sizes for a variety of applications
Unique cradle design provides maximum stability for cable bundle
Used with PANDUIT ® cable ties for a complete wire routing solution
For indoor use
Part Number Material Color
Height
In. mm
Length
In. mm
Width
Mounting
In. mm Method
TM2S8-C
Nylon
6.6
Natural .28
7.0
.63 16.1 .43 10.8
#8 (M4)
Screw
TM3S8-C
Nylon
6.6
Natural .38
9.5
.88 22.2 .62 15.8
#8 (M4)
Screw
Tools &
Accessories
Used
With
Cable
Ties‡
Std.
Pkg.
Qty.
M, I, S
100
M, I, S, LH 100
‡ Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard,
LH = Light-Heavy, H = Heavy, HLM = Miniature TAK-TY ® Hook & Loop Ties.
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
E11
Wiring Duct Tools & Accessories
Overview
Tie Anchor Mounts — Screw Applied
•
•
•
•
•
Control
Panel
Special
Environment
Part Number
Material
Color
TA1S8-C
Nylon 6.6 Natural
4-way cable tie entry makes part orientation fast and easy
Install with a screw or rivet for a strong, secure installation
Small overall size allows use where space is limited
Used with PANDUIT ® cable ties for a complete wire routing solution
For indoor use
Height
In.
mm
Length
In.
mm
Width
In.
mm
.20
.38
.75
5.0
9.5
19.1
Hole
Diameter
In.
mm
.170
4.3
Mounting
Method
Used
With
Cable
Ties‡
Std.
Pkg.
Qty.
#8 (M4) Screw
M, I, S
100
‡ Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy-Standard, LH = Light-Heavy, H = Heavy, HLM = Miniature
TAK-TY ® Hook & Loop Ties.
Low Profile Mounts — Screw Applied
•
•
•
•
•
Voice &
Data
Tools &
Accessories
Part Number
Material
LPMS-S8-C
Nylon 6.6 Natural
Color
Install with a screw or rivet for a strong, secure installation
Counter sunk screw hole will not damage the wire bundle
Small overall size allows use where space is limited
Used with PANDUIT ® cable ties for a complete wire routing solution
For indoor use
Height
In.
mm
Length
In.
mm
Width
In.
mm
.12
.75
.50
3.0
19.1
12.7
Hole
Diameter
In.
mm
.180
4.6
Mounting
Method
Used
With
Cable
Ties‡
Std.
Pkg.
Qty.
#8 (M4) Screw
M, I, S
100
‡ Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy-Standard, LH = Light-Heavy, H = Heavy, HLM = Miniature
TAK-TY ® Hook & Loop Ties.
Adhesive Tape for Wiring Duct
•
•
•
•
Recommended installation temperature is 70°F (21°C)
UL Recognized service temperature is 32°F (0°C) to 140°F (60°C)
Optimum recommended dwell time for acrylic adhesive is 8 hours
Recommended tape load is 1/2 lb. per square inch of tape area
Technical
Info
Duct Size
WxH
As a Permanent
Mounting Method:
Eliminates the drilling and
tapping of holes, labor and
time required to install
separate mounting devices.
Index
E12
As a Temporary
Mounting Method:
Holds duct in place to free
installer’s hands to further
secure duct with screws,
rivets, etc.
Tape
Part
Number
.5 x .5 thru 1.5 x 4 P32W2A2-50-7
P32W2A2-50-72
2 x 1 thru 3 x 3 P32W2A2-50-7
P32W2A2-50-72
3 x 4 thru 3 x 5 P32W2A2-75-7
P32W2A2-75-72
4 x 1.5 thru 4 x 3 P32W2A2-50-7
P32W2A2-75-72
4 x 4 thru 6 x 4 P32W2A2-75-7
P32W2A2-75-72
Roll
Length
Yds.
M
7.0
72.0
7.0
72.0
7.0
72.0
7.0
72.0
6.4
65.5
6.4
65.5
6.4
65.5
6.4
65.5
1
1
1
1
1
1
1
1
7.0
72.0
6.4
65.5
1 Roll
1 Roll
Order number of rolls required in multiples of Standard Package Quantity.
Order number of pieces required, in multiples of Standard Package Quantity.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Roll 100 Rolls
Roll
9 Rolls
Roll 100 Rolls
Roll
9 Rolls
Roll 60 Rolls
Roll
7 Rolls
Roll 100 Rolls
Roll
9 Rolls
60 Rolls
7 Rolls
®
PANDUCT ® Wiring Duct
Overview
Adhesive Tape Guide
Selection of Wiring Duct Part Numbers
Available with Factory Applied Adhesive Tape
Control
Panel
G Duct
Light Gray
G Duct
White
G Duct
Black
F Duct
Light Gray
NE Duct
White
G.5X.5LG6-A
G.5X.5WH6-A
—
F.5X.5LG6-A
—
G.5X1LG6-A
G.5X1WH6-A
—
F.5X1LG6-A
—
G.75X.75LG6-A
—
—
F.75X.75LG6-A
—
G.75X1LG6-A
G.75X1WH6-A
—
—
—
G.75X1.5LG6-A
G.75X1.5WH6-A
—
F.75X1.5LG6-A
—
G.75X2LG6-A
G.75X2WH6-A
—
—
—
G1X1LG6-A
G1X1WH6-A
—
F1X1LG6-A
—
G1X1.5LG6-A
G1X1.5WH6-A
—
F1X1.5LG6-A
G1X2LG6-A
G1X2WH6-A
—
F1X2LG6-A
NE1X2WH6-A
G1X3LG6-A
G1X3WH6-A
F1X3LG6-A
—
G1X3BL6-A
—
G1X4LG6-A
G1X4WH6-A
—
F1X4LG6-A
—
G1.5X1LG6-A
G1.5X1WH6-A
—
F1.5X1LG6-A
—
G1.5X1.5LG6-A
G1.5X1.5WH-A
—
F1.5X1.5LG6-A
G1.5X2LG6-A
G1.5X2WH6-A
—
F1.5X2LG6-A
—
G1.5X3LG6-A
G1.5X3WH6-A
—
F1.5X3LG6-A
—
G1.5X4WH6-A
—
F1.5X4LG6-A
—
G2X1LG6-A
G2X1WH6-A
—
F2X1LG6-A
—
G2X1.5LG6-A
G2X1.5WH6-A
—
F2X1.5LG6-A
—
G2X2LG6-A
G2X2WH6-A
G2X3LG6-A
G2X3WH6-A
G2X4LG6-A
G2X4WH6-A
G2X5LG6-A
G2X5WH6-A
—
G2.5X3LG6-A
G2.5X3WH6-A
—
—
G2X4BL6-A
F2X2LG6-A
NE2X2WH6-A
F2X3LG6-A
—
F2X4LG6-A
—
F2X5LG6-A
—
—
G3X1LG6-A
G3X1WH6-A
—
F3X1LG6-A
NE3X1WH6-A
G3X2WH6-A
—
F3X2LG6-A
—
G3X3LG6-A
G3X3WH6-A
F3X3LG6-A
—
G3X4LG6-A
G3X4WH6-A
—
F3X4LG6-A
—
G3X5LG6-A
G3X5WH6-A
—
F3X5LG6-A
G4X1.5LG6-A
G4X1.5WH6-A
—
G4X2LG6-A
G4X2WH6-A
—
F4X2LG6-A
NE4X2WH6-A
G4X3LG6-A
G4X3WH6-A
—
F4X3LG6-A
NE4X3WH6-A
G4X4LG6-A
G4X4WH6-A
F4X4LG6-A
NE4X4WH6-A
—
—
G4X4BL6-A
—
G4X5LG6-A
G4X5WH6-A
—
F4X5LG6-A
*All 3 sizes of Flexible Duct come provided with adhesive: FL12X12LG-A, FL25X25LG-A, FL50X50LG-A
Specifications for
Factory Applied Tape
Tools &
Accessories
—
G3X2LG6-A
G3X3BL6-A
Voice &
Data
NE1.5X2WH6-A
G1.5X4LG6-A
G2X2BL6-A
Special
Environment
Technical
Info
—
Tape
Width
Thickness
mm
Duct Size
WxH
Rows of
Tape
In.
mm
In.
.5 x .5 through 1.5 x 4
2 x 1 through 3 x 3
3 x 4 through 3 x 5
4 x 1.5 through 4 x 3
4 x 4 through 6 x 4
1
2
2
2
2
.50
.50
.75
.50
.75
12.7
12.7
19.1
12.7
19.1
.03
.03
.03
.03
.03
.8
.8
.8
.8
.8
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Index
E13
Wiring Duct Tools
Overview
PANDUCT ® Cutting Tool
• Easily cuts any PANDUCT ® duct and cover
Control
Panel
Part Number
Part Description
Std.
Pkg.
Qty.
DCT
Hand held duct cutting tool.
1
DCT-BLD
Replacement blade kit with blade and nylon insert.
1
DCT-RI
Replacement nylon insert.
5
Always use approved safety goggles when using any tools.
Special
Environment
DCT-BLD
Cut cover as shown,
latch side-up.
Use to cut any PANDUCT ®
Duct or Cover.
Voice &
Data
DCT-RI
PANDUCT ® Duct Finger Cutting Tool
• Easily removes duct fingers in tight places
• For use with all slotted wiring duct
Tools &
Accessories
Part Number
DFCT
Part Description
Hand held duct finger cutting tool.
Always use approved safety goggles when using any tools.
Technical
Info
Index
E14
Order number of pieces required, in multiples of Standard Package Quantity.
Std.
Pkg.
Qty.
1
®
PANDUCT ® Wiring Duct
Overview
PANDUCT ® Notching Tool
• Notches duct sidewalls to bottom scoreline for tee and corner junctions
Part Number
DNT-100
Std.
Pkg.
Qty.
Part Description
Hand held sidewall notching tool.
Control
Panel
1
Always use approved safety goggles when using any tools.
Special
Environment
Step 1 —
Notch wiring duct sidewall at the
desired opening width.
Step 2 —
Snap off notched wiring duct piece
at bottom scoreline.
PANDUCT ® Nylon Rivet Installation Tool
• Installs PANDUIT ® Nylon Rivets (NR1) quickly and easily
Part Number
TNR
Voice &
Data
Std.
Pkg.
Qty.
Part Description
Hand held nylon rivet installation tool.
1
Nylon Rivets
NR1-C
NR1-M
Nylon rivet for use with TNR Rivet Tool.
Nylon rivet for use with TNR Rivet Tool.
100
1000
Always use approved safety goggles when using any tools.
Tools &
Accessories
TNR
Total Thickness of
Panel and Duct
In.
mm
.158 - .187
.188 - .218
.219 - .250
.251 and up
4.0 - 4.7
4.8 - 5.5
5.6 - 6.4
6.5 and up
Panel Hole
Dia. Needed
In.
mm
.18
.19
.20
.21
4.7
4.9
5.2
5.4
Technical
Info
NR1
• Fast, lowest cost
mounting method
• Installs quickly and easily
using PANDUIT ® Rivet
Installation Tool (TNR)
Index
Step 1 —
Insert rivet in tool.
Step 2 —
Position rivet into hole.
Step 3 —
Install rivet with sharp tap.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
E15
Overview
Wiring Duct Tools & Accessories
Notes
Control
Panel
Special
Environment
Voice &
Data
Tools &
Accessories
Technical
Info
Index
E16
Wiring Duct Technical Info
Overview
l
Control
Panel
PANDUIT ® provides detailed technical information to assist in selecting and specifying the
proper Wiring Duct:
Wiring Duct Dimensional Information
Types G & D Wiring Duct . . . . . . . . . . . . . . . . . . . . . .F2
Type F Wiring Duct & Type FS Raceway . . . . . . . . . . .F3
Special
Environment
Types MC & TMC Wiring Duct . . . . . . . . . . . . . . . . . .F4
Type NNC Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . .F5
Type NE Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . .F6
Type H & Type FL Wiring Duct . . . . . . . . . . . . . . . . . .F7
Wirefill Capacity Information
Data &
Voice
Types G, F & FS Wiring Duct . . . . . . . . . . . . . . . . . . .F8
Types MC, NNC & TMC Wiring Duct . . . . . . . . . . . . . .F9
Type H Wiring Duct
. . . . . . . . . . . . . . . . . . . . . . . . . .F9
Type FL Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . .F9
Type NE Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . .F10
Wirefill Formula Explanation . . . . . . . . . . . . . . . . . .F11
Tools &
Accessories
Technical Information
UL94 Vertical Burning Test . . . . . . . . . . . . . . . . . . . .F12
Material Specifications . . . . . . . . . . . . . . . . . . . . . . .F13
Color Selection Guide . . . . . . . . . . . . . . . . . . . . . . .F14
Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F15
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
F1
Wiring Duct Technical Info
Overview
PANDUCT ® Type G & D Wiring Duct Dimensions
>
Control
Panel
>
For .5" high duct.
C
>
F
>
B
T
D
H
>
>
E
A
>
For .75", 1", 1.5", 2", 3", 4" and 5" high duct.
>
C
Special
Environment
F
>
T
B
D
H
A
E
Note: ‘A’ dimension is measured at base.
Note: ‘K’ dimension shown in mounting hole
dimensions below.
>
>
Data &
Voice
.67 +- .06 TYP
[16.94 +- 1.5]
.44 +- .02
[11.2 +- 0.5]
H
>
>
Tools &
Accessories
For 2" duct height = 3 rows of holes
3" duct height = 4 rows of holes
4" duct height = 6 rows of holes
>
Mounting Hole Dimensions
For 0.5", 0.75", 1", and 1.5" wide duct.
.50 TYP
[12.7]
>
.20 TYP
[5.0]
C
L
Technical
Info
4.0 [101.6] TYP
2.0
[50.8]
>
>
For 2.0", 2.5", 3", 4" and 6" wide duct.
K
K
C
L
Index
4.0 [101.6] TYP
2.0
[50.8]
>
>
DUCT SIZE
(W x H)
.5 x .5
(12.7) (12.7)
.5 x 1
(12.7) (25.4)
.5 x 2
(12.7) (50.8)
.5 x 4
(12.7) (101.6)
.75 x .75
(19.1) (19.1)
.75 x 1
(19.1) (25.4)
.75 x 1.5
(19.1) (38.1)
.75 x 2
(19.1) (50.8)
1x1
(25.4) (25.4)
1 x 1.5
(25.4) (38.1)
1x2
(25.4) (50.8)
1x3
(25.4) (76.2)
1x4
(25.4) (101.6)
1.5 x 1
(38.1) (25.4)
1.5 x 1.5
(38.1) (38.1)
1.5 x 2
(38.1) (50.8)
1.5 x 3
(38.1) (76.2)
1.5 x 4
(38.1) (101.6)
2x1
(50.8) (25.4)
2 x 1.5
(50.8) (38.1)
2x2
(50.8) (50.8)
2x3
(50.8) (76.2)
2x4
(50.8) (101.6)
2x5
(50.8) (127.0)
2.5 x 3
(63.5) (76.2)
3x1
(76.2) (25.4)
3x2
(76.2) (50.8)
3x3
(76.2) (76.2)
3x4
(76.2) (101.6)
3x5
(76.2) (127.0)
4 x 1.5
(101.6) (38.1)
4x2
(101.6) (50.8)
4x3
(101.6) (76.2)
4x4
(101.6) (101.6)
4x5
(101.6) (127.0)
6x4
(152.4) (101.6)
A
0.69
(17.5)
0.69
(17.5)
0.69
(17.5)
0.69
(17.5)
0.93
(23.6)
0.93
(23.6)
0.93
(23.6)
0.93
(23.6)
1.26
(32.0)
1.26
(32.0)
1.26
(32.0)
1.26
(32.0)
1.26
(32.0)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.75
(69.9)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
6.25
(158.8)
B
0.60
(15.2)
1.06
(26.9)
2.03
(51.6)
4.10
(104.1)
0.82
(20.8)
1.06
26.9
1.57
(39.9)
2.03
(51.6)
1.12
(28.4)
1.62
(41.1)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
1.12
(28.4)
1.62
(41.1)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
1.12
(28.4)
1.62
(41.1)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
5.10
(129.5)
3.12
(79.2)
1.12
(28.4)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
5.10
(129.5)
1.62
(41.1)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
5.10
(129.5)
4.15
(105.4)
C
0.69
(17.5)
0.69
(17.5)
0.69
(17.5)
0.69
(17.5)
0.94
(23.9)
0.94
(23.9)
0.94
(23.9)
0.94
(23.9)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.75
(69.9)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
6.25
(158.8)
DIMENSIONS — Inches (mm)
D
E
F
H
0.38
0.37
0.80
0.50
(9.5)
(9.3)
(20.3)
(12.7)
0.75
0.31
0.80
1.00
(19.1)
(7.9)
(20.3)
(25.4)
1.63
0.31
0.80
2.00
(41.3)
(7.9)
(20.3)
(50.8)
2.25
0.31
1.00
4.00
(57.2)
(7.9)
(25.4) (101.6)
0.56
0.31
0.80
0.75
(14.3)
(7.9)
(20.3)
(19.1)
0.75
0.31
0.80
1.00
(19.1)
(7.9)
(20.3)
(25.4)
1.20
0.31
0.80
1.50
(30.5)
(7.9)
(20.3)
(38.1)
1.63
0.31
0.80
2.00
(41.3)
(7.9)
(20.3)
(50.8)
0.75
0.31
0.80
1.00
(19.1)
(7.9)
(20.3)
(25.4)
1.20
0.31
0.80
1.50
(30.5)
(7.9)
(20.3)
(38.1)
1.63
0.31
0.80
2.00
(41.3)
(7.9)
(20.3)
(50.8)
2.63
0.31
1.00
3.00
(66.7)
(7.9)
(25.4)
(76.2)
3.63
0.31
1.00
4.00
(92.1)
(7.9)
(25.4) (101.6)
.75
0.31
0.80
1.00
(19.1)
(7.9)
(20.3)
(25.4)
1.20
0.31
0.80
1.50
(30.5)
(7.9)
(20.3)
(38.1)
1.63
0.31
0.80
2.00
(41.3)
(7.9)
(20.3)
(50.8)
2.63
0.31
1.00
3.00
(66.7)
(7.9)
(25.4)
(76.2)
3.63
0.31
1.00
4.00
(92.1)
(7.9)
(25.4) (101.6)
0.75
0.31
0.80
1.00
(19.1)
(7.9)
(20.3)
(25.4)
1.20
0.31
0.80
1.50
(30.5)
(7.9)
(20.3)
(38.1)
1.63
0.31
0.80
2.00
(41.3)
(7.9)
(20.3)
(50.8)
2.63
0.31
1.00
3.00
(66.7)
(7.9)
(25.4)
(76.2)
3.63
0.31
1.00
4.00
(92.1)
(7.9)
(25.4) (101.6)
4.63
0.38
1.33
5.00
(117.5)
(9.5)
(33.9) (127.0)
2.63
0.31
1.00
3.00
(66.7)
(7.9)
(25.4)
(76.2)
0.75
0.31
0.80
1.00
(19.1)
(7.9)
(20.3)
(25.4)
1.63
0.31
0.80
2.00
(41.3)
(7.9)
(20.3)
(50.8)
2.63
0.31
1.00
3.00
(66.7)
(7.9)
(25.4)
(76.2)
3.63
0.31
1.00
4.00
(92.1)
(7.9)
(25.4) (101.6)
4.63
0.38
1.33
5.00
(117.5)
(9.5)
(33.9) (127.0)
1.20
0.31
0.80
1.50
(30.5)
(7.9)
(20.3)
(38.1)
1.63
0.31
0.80
2.00
(41.3)
(7.9)
(20.3)
(50.8)
2.63
0.31
1.00
3.00
(66.7)
(7.9)
(25.4)
(76.2)
3.63
0.31
1.00
4.00
(92.1)
(7.9)
(25.4) (101.6)
4.63
0.38
1.33
5.00
(117.5)
(9.5)
(33.9) (127.0)
3.63
0.31
1.00
4.00
(92.1)
(7.9)
(25.4) (101.6)
> Available for Type G Duct only.
See page F14 for wiring duct color and size availability.
F2
K
ON CENTERLINE
Dimensions are shown for reference only.
>
Contact customer service (see page
footnote) for specific dimensional needs.
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
0.73
(18.4)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.50
(38.1)
1.50
(38.1)
1.50
(38.1)
1.50
(38.1)
1.50
(38.1)
2.50
(63.5)
T
0.05
(1.3)
0.05
(1.3)
0.08
(2.0)
0.10
(2.4)
0.06
(1.4)
0.06
(1.4)
0.07
(1.8)
0.08
(2.0)
0.06
(1.4)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.06
(1.5)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.06
(1.5)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.12
(2.9)
0.10
(2.5)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.12
(2.9)
0.07
(1.8)
0.08
(2.0)
0.10
(2.5)
0.11
(2.7)
0.12
(2.9)
0.11
(2.8)
®
PANDUCT ® Wiring Duct
Overview
PANDUCT ® Type F Wiring Duct & FS Raceway Dimensions
For .5", .75", 1" and 1.5" high duct.
E
C
D
H
B
T
A
F
For 2", 3", 4" and 5" high duct.
C
E
B
D
H
T
A
F
Note: ‘A’ dimension is measured at base.
Note: ‘K’ dimension shown in mounting hole
dimensions below.
Mounting Hole Dimensions
For .5", .75", 1" and 1.5" wide duct.
.50 TYP
[12.7]
.20 TYP
[5.0]
C
L
2.0 TYP
[50.8]
2.0
[50.8]
For 2.0", 2.5", 3", 4" and 6" wide duct.
K
K
2.0 TYP
[50.8]
C
L
>
2.0
[50.8]
Note: For Type FS Raceway, no mounting
holes is the standard condition; if mounting
holes are required, delete NM from the
Part Number.
>
DUCT SIZE
(W x H)
.5 x .5
(12.7) (12.7)
.5 x 1
(12.7) (25.4)
.75 x .75
(19.1) (19.1)
.75 x 1.5
(19.1) (38.1)
1x1
(25.4) (25.4)
1 x 1.5
(25.4) (38.1)
1x2
(25.4) (50.8)
1x3
(25.4) (76.2)
1x4
(25.4) (101.6)
1.5 x 1
(38.1) (25.4)
1.5 x 1.5
(38.1) (38.1)
1.5 x 2
(38.1) (50.8)
1.5 x 3
(38.1) (76.2)
1.5 x 4
(38.1) (101.6)
2x1
(50.8) (25.4)
2 x 1.5
(50.8) (38.1)
2x2
(50.8) (50.8)
2x3
(50.8) (76.2)
2x4
(50.8) (101.6)
2x5
(50.8) (127.0)
3x1
(76.2) (25.4)
3x2
(76.2) (50.8)
3x3
(76.2) (76.2)
3x4
(76.2) (101.6)
3x5
(76.2) (127.0)
4 x 1.5
(101.6) (38.1)
4x2
(101.6) (50.8)
4x3
(101.6) (76.2)
4x4
(101.6) (101.6)
4x5
(101.6) (127.0)
6x4
(152.4) (101.6)
A
0.69
(17.5)
0.69
(17.5)
0.93
(23.6)
0.93
(23.6)
1.26
(32.0)
1.26
(32.0)
1.26
(32.0)
1.26
(32.0)
1.26
(32.0)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
6.25
(158.8)
B
0.60
(15.2)
1.06
(26.9)
0.82
(20.8)
1.57
(39.9)
1.12
(28.4)
1.62
(41.1)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
1.12
(28.4)
1.62
(41.1)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
1.12
(28.4)
1.62
(41.1)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
5.10
(129.5)
1.12
(28.4)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
5.10
(129.5)
1.62
(41.1)
2.12
(53.8)
3.12
(79.2)
4.10
(104.1)
5.10
(129.5)
4.15
(105.4)
C
0.69
(17.5)
0.69
(17.5)
0.94
(23.9)
0.94
(23.9)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
6.25
(158.8)
DIMENSIONS — Inches (mm)
D
E
F
H
0.38
0.20
0.50
0.50
(9.5)
(5.0)
(12.7)
(12.7)
0.75
0.20
0.50
1.00
(19.1)
(5.0)
(12.7)
(25.4)
0.56
0.20
0.50
0.75
(14.3)
(5.0)
(12.7)
(19.1)
1.20
0.20
0.50
1.50
(30.5)
(5.0)
(12.7)
(38.1)
0.75
0.20
0.50
1.00
(19.1)
(5.0)
(12.7)
(25.4)
1.20
0.20
0.50
1.50
(30.5)
(5.0)
(12.7)
(38.1)
1.63
0.20
0.50
2.00
(41.3)
(5.0)
(12.7)
(50.8)
2.63
0.20
0.50
3.00
(66.7)
(5.0)
(12.7)
(76.2)
3.63
0.20
0.50
4.00
(92.1)
(5.0)
(12.7) (101.6)
0.75
0.20
0.50
1.00
(19.1)
(5.0)
(12.7)
(25.4)
1.20
0.20
0.50
1.50
(30.5)
(5.0)
(12.7)
(38.1)
1.63
0.20
0.50
2.00
(41.3)
(5.0)
(12.7)
(50.8)
2.63
0.20
0.50
3.00
(66.7)
(5.0)
(12.7)
(76.2)
3.63
0.20
0.50
4.00
(92.1)
(5.0)
(12.7) (101.6)
0.75
0.20
0.50
1.00
(19.1)
(5.0)
(12.7)
(25.4)
1.20
0.20
0.50
1.50
(30.5)
(5.0)
(12.7)
(38.1)
1.63
0.20
0.50
2.00
(41.3)
(5.0)
(12.7)
(50.8)
2.63
0.20
0.50
3.00
(66.7)
(5.0)
(12.7)
(76.2)
3.63
0.20
0.50
4.00
(92.1)
(5.0)
(12.7) (101.6)
4.63
0.20
0.50
5.00
(117.5)
(5.0)
(12.7) (127.0)
0.75
0.20
0.50
1.00
(19.1)
(5.0)
(12.7)
(25.4)
1.63
0.20
0.50
2.00
(41.3)
(5.0)
(12.7)
(50.8)
2.63
0.20
0.50
3.00
(66.7)
(5.0)
(12.7)
(76.2)
3.63
0.20
0.50
4.00
(92.1)
(5.0)
(12.7) (101.6)
4.63
0.20
0.50
5.00
(117.5)
(5.0)
(12.7) (127.0)
1.50
N/A
N/A
N/A
(38.1)
1.63
0.20
0.50
2.00
(41.3)
(5.0)
(12.7)
(50.8)
2.63
0.20
0.50
3.00
(66.7)
(5.0)
(12.7)
(76.2)
3.63
0.20
0.50
4.00
(92.1)
(5.0)
(12.7) (101.6)
4.63
0.20
0.50
5.00
(117.5)
(5.0)
(12.7) (127.0)
4.00
N/A
N/A
N/A
(101.6)
K
ON CENTERLINE
Dimensions are shown for reference
only. Contact customer service
(see page footnote) for specific
dimensional needs.
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
N/A
1.50
(38.1)
1.50
(38.1)
1.50
(38.1)
1.50
(38.1)
N/A
T
0.05
(1.3)
0.05
(1.3)
0.06
(1.4)
0.07
(1.8)
0.06
(1.4)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.06
(1.5)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.06
(1.5)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.12
(2.9)
0.07
(1.7)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.12
(2.9)
0.07
(1.8)
0.08
(2.0)
0.10
(2.4)
0.11
(2.7)
0.12
(2.9)
0.11
(2.8)
Control
Panel
Special
Environment
Data &
Voice
Tools &
Accessories
Technical
Info
> Available for Type FS Duct only.
See page F14 for wiring duct color and size availability.
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
F3
Wiring Duct Technical Info
Overview
PANDUCT ® Type MC & TMC Wiring Duct Dimensions
Control
Panel
>
For 25mm, 37.5mm and 50mm high duct.
E
C
>
B
D
H
>
T
F
A
>
For 62.5mm, 75mm and 100mm high duct.
C
Special
Environment
>
E
>
B
D
H
T
>
A
Data &
Voice
F
>
Note: ‘A’ dimension is measured at base.
Note: ‘K’ dimension shown in mounting hole
dimensions below.
>
>
Mounting Hole Dimensions
For 25mm, 37.5mm and 50mm width duct.
>
2000 mm
[78.74]
>
14 mm
[0.55]
Tools &
Accessories
8 mm
[0.32]
1950 mm
[76.77]
>
For 75mm and 100mm width duct.
>
2000 mm
[78.74]
50 mm
[1.97]
Technical
Info
6.5 mm
[0.26]
F4
12.5 mm
[0.49]
>
A
B
C
25 x 25
24.6
23.6
24.6
13.6
5.0
12.5
20.5
1.4
(.98) x (.98)
(0.97)
(0.93)
(0.97)
(0.54)
(0.20)
(0.49)
(0.81)
(0.06)
25 x 37.5
24.6
35.8
24.6
24.7
5.0
12.5
33.0
1.4
(.98) x (1.48)
(0.97)
(1.41)
(0.97)
(0.97)
(0.20)
(0.49)
(1.30)
(0.06)
1950 mm
[76.77]
50 mm
[1.97]
25 mm
[0.98]
H
K
T
25 x 50
24.6
47.8
24.6
34.8
5.0
12.5
45.5
1.5
(.98) x (1.97)
(0.97)
(1.88)
(0.97)
(1.37)
(0.20)
(0.49)
(1.79)
(0.06)
25 x 62.5
24.6
59.7
24.6
45.8
5.0
12.5
58.0
1.5
(.98) x (2.46)
(0.97)
(2.35)
(0.97)
(1.80)
(0.20)
(0.49)
(2.28)
(0.06)
25 x 75
24.6
73.2
24.6
57.6
5.0
12.5
70.5
1.7
(.98) x (2.95)
(0.97)
(2.88)
(0.97)
(2.27)
(0.20)
(0.49)
(2.78)
(0.07)
37.5 x 37.5
37.1
35.8
37.1
24.7
5.0
12.5
33.0
(1.48) x (1.48)
(1.46)
(1.41)
(1.46)
(0.97)
(0.20)
(0.49)
(1.30)
37.5 x 50
37.1
47.8
37.1
34.8
5.0
12.5
45.5
(1.48) x (1.97)
(1.46)
(1.88)
(1.46)
(1.37)
(0.20)
(0.49)
(1.79)
37.5 x 62.5
37.1
59.7
37.1
45.8
5.0
12.5
58.0
(1.48) x (2.46)
(1.46)
(2.35)
(1.46)
(1.80)
(0.20)
(0.49)
(2.28)
37.5 x 75
37.1
72.4
37.1
57.6
5.0
12.5
70.5
(1.48) x (2.95)
(1.46)
(2.85)
(1.46)
(2.27)
(0.20)
(0.49)
(2.78)
1.5
(0.06)
1.7
(0.07)
1.7
(0.07)
1.8
(0.07)
50 x 50
49.5
48.0
49.6
34.8
5.0
12.5
45.5
1.7
(1.97) x (1.97)
(1.95)
(1.89)
(1.95)
(1.37)
(0.20)
(0.49)
(1.79)
(0.07)
50 x 75
49.5
72.4
49.6
57.6
5.0
12.5
70.5
1.9
(1.97) x (2.95)
(1.95)
(2.85)
(1.95)
(2.27)
(0.20)
(0.49)
(2.78)
(0.08)
50 x 100
49.5
97.8
49.6
81.0
5.0
12.5
95.5
2.2
(1.97) x (3.94)
(1.95)
(3.85)
(1.95)
(3.19)
(0.20)
(0.49)
(3.76)
(0.09)
62.5 x 37.5
62.0
35.8
62.1
24.7
5.0
12.5
33.0
1.7
(2.46) x (1.48)
(2.44)
(1.41)
(2.44)
(0.97)
(0.20)
(0.49)
(1.30)
(0.07)
62.5 x 62.5
62.0
59.7
62.1
45.8
5.0
12.5
58.0
1.8
(2.46) x (2.46)
(2.44)
(2.35)
(2.44)
(1.80)
(0.20)
(0.49)
(2.28)
(0.07)
75 x 50
74.7
48.0
74.6
34.8
5.0
12.5
45.5
25.0
2.0
(2.95) x (1.97)
(2.94)
(1.89)
(2.94)
(1.37)
(0.20)
(0.49)
(1.79)
(0.98)
(0.08)
75 x 62.5
74.7
59.7
74.6
45.8
5.0
12.5
58.0
25.0
2.0
(2.95) x (2.46)
(2.94)
(2.35)
(2.94)
(1.80)
(0.20)
(0.49)
(2.28)
(0.98)
(0.08)
75 x 75
74.7
73.2
74.6
57.6
5.0
12.5
70.5
25.0
2.2
(2.95) x (2.95)
(2.94)
(2.88)
(2.94)
(2.27)
(0.20)
(0.49)
(2.78)
(0.98)
(0.09)
75 x 100
74.7
97.8
74.6
81.0
5.0
12.5
95.5
25.0
2.3
(2.95) x (3.94)
(2.94)
(3.85)
(2.94)
(3.19)
(0.20)
(0.49)
(3.76)
(0.98)
(0.09)
100 x 50
99.6
48.0
99.6
34.8
5.0
12.5
45.5
25.0
2.0
(3.94) x (1.97)
(3.92)
(1.89)
(3.92)
(1.37)
(0.20)
(0.49)
(1.79)
(0.98)
(0.08)
100 x 62.5
99.6
59.7
99.6
45.8
5.0
12.5
58.0
25.0
2.0
(3.94) x (2.46)
(3.92)
(2.35)
(3.92)
(1.80)
(0.20)
(0.49)
(2.28)
(0.98)
(0.08)
100 x 75
99.6
73.2
99.6
57.6
5.0
12.5
70.5
25.0
2.5
(3.94) x (2.95)
(3.92)
(2.88)
(3.92)
(2.27)
(0.20)
(0.49)
(2.78)
(0.98)
(0.10)
100 x 100
99.6
97.8
99.6
81.0
5.0
12.5
99.5
25.0
2.5
(3.94) x (3.94)
(3.92)
(3.85)
(3.92)
(3.19)
(0.20)
(0.49)
(3.76)
(0.98)
(0.10)
> Available for Type MC Duct only.
4.5 mm
[0.18]
Index
25 mm
[0.98]
DIMENSIONS — mm (Inches)
D
E
F
DUCT SIZE
(W x H)
ON CENTERLINE
Dimensions are shown for reference only.
Contact customer service (see page
footnote) for specific dimensional needs.
®
PANDUCT ® Wiring Duct
Overview
PANDUCT ® Type NNC Wiring Duct Dimensions
Dimensions are shown for reference only.
Contact customer service (see page
footnote) for specific dimensional needs.
For 25mm, 37.5mm and 50mm high duct.
10.0 TYP
[.39]
C
B
D
H
T
A
25.0 TYP
[.98]
For 75mm and 100mm high duct.
C
10.0 TYP
[.39]
B
T
D
H
A
25.0 TYP
[.98]
Mounting Hole Dimensions
For 25mm, 37.5mm and 50mm width duct.
DUCT SIZE
(W x H)
A
B
25 x 25
(.98) x (.98)
25 x 37
(.98) x (1.48)
25 x 50
(.98) x (1.97)
24.6
(0.97)
24.6
(0.97)
24.6
(0.97)
23.6
(0.93)
35.8
(1.41)
47.8
(1.88)
DIMENSIONS – mm (Inches)
C
D
24.6
(0.97)
24.6
(0.97)
24.6
(.97)
13.6
(0.54)
24.6
(0.97)
34.8
(1.37)
H
K
20.3
(0.80)
33.0
(1.30)
45.5
(1.79)
1.5
(0.06)
1.8
(0.07)
2.0
(0.08)
25 x 75
24.6
72.4
24.6
57.6
70.6
2.0
(.98) x (2.95)
(0.97)
(2.85)
(0.97)
(2.27)
(2.78)
(0.08)
37.5 x 37.5
(1.48) x (1.48)
37.5 x 50
(1.48) x (1.97)
37.5 x 75
(1.48) x (2.95)
50 x 50
(1.97) x (1.97)
50 x 75
(1.97) x (2.95)
37.1
(1.46)
37.1
(1.46)
37.1
(1.46)
49.5
(1.95)
49.5
(1.95)
35.8
(1.41)
47.8
(1.88)
72.4
(2.85)
47.8
(1.88)
72.4
(2.85)
37.1
(1.46)
37.1
(1.46)
37.1
(1.46)
49.5
(1.95)
49.5
(1.95)
24.7
(0.97)
34.8
(1.37)
57.6
(2.27)
34.8
(1.37)
57.6
(2.27)
33.0
(1.30)
45.5
(1.79)
70.6
(2.78)
45.5
(1.79)
70.6
(2.78)
1.8
(0.07)
2.0
(0.08)
2.0
(0.08)
2.0
(0.08)
2.0
(0.08)
50 x 100
49.5
97.8
49.5
81.0
95.5
2.3
(1.97) x (3.94)
(1.95)
(3.85)
(1.95)
(3.19)
(3.76)
(0.09)
75 x 75
(2.95) x (2.95)
100 x 50
(3.94) x (1.97)
74.7
(2.94)
99.6
(3.92)
72.4
(2.85)
47.8
(1.88)
74.7
(2.94)
99.6
(3.92)
57.6
(2.27)
34.8
(1.37)
70.6
(2.78)
45.5
(1.79)
2.0
(0.08)
2.0
(0.08)
100 x 75
99.6
72.4
99.6
57.6
70.6
2.0
(3.94) x (2.95)
(3.92)
(2.85)
(3.92)
(2.27)
(2.78)
(0.08)
100 x 100
99.6
97.8
99.6
81.0
95.5
2.3
(3.92) x (3.85)
(3.92)
(3.85)
(3.92)
(3.19)
(3.76)
(0.09)
Control
Panel
Special
Environment
Data &
Voice
2000 mm
[78.74]
14 mm
[0.55]
Tools &
Accessories
8 mm
[0.32]
1950 mm
[76.77]
For 75mm and 100mm width duct.
2000 mm
[78.74]
50 mm
[1.97]
6.5 mm
[0.26]
4.5 mm
[0.18]
25 mm
[0.98]
1950 mm
[76.77]
12.5 mm
[0.49]
50 mm
[1.97]
Technical
Info
25 mm
[0.98]
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
F5
Wiring Duct Technical Info
Overview
PANDUCT ® Type NE Wiring Duct Dimensions
Control
Panel
For .5" high duct.
F
C
D H
B
E
Special
Environment
T
A
For 1", 1.25", 1.5", 1.75", 2", 2.5",
3", 4" and 5" high duct.
F
C
D
H
B
E
T
A
Data &
Voice
Mounting Hole Dimensions
For 0.5", 0.75", 1", and 1.5" wide duct.
.50 TYP
[12.7]
.195 TYP
[5.0]
C
L
Tools &
Accessories
4.0 [101.6] TYP
2.0
[50.8]
For 2.0", 2.5", 3" and 4" wide duct.
K
K
Technical
Info
Index
F6
4.0 [101.6] TYP
2.0
[50.8]
C
L
DUCT SIZE
(W x H)
A
B
C
.5 x .5
(12.7) (12.7)
.5 x 1
(12.7) (25.4)
1x1
(25.4) (25.4)
1 x 1.5
(25.4) (38.1)
1x2
(25.4) (50.8)
1x3
(25.4) (76.2)
1x4
(25.4) (101.6)
1.5 x 1.5
(38.1) (38.1)
1.5 x 2
(38.1) (50.8)
1.5 x 3
(38.1) (76.2)
1.5 x 4
(38.1) (101.6)
2x1
(50.8) (25.4)
2x2
(50.8) (50.8)
2x3
(50.8) (76.2)
2x4
(50.8) (101.6)
2.5 x 3
(63.5) (76.2)
3x1
(76.2) (25.4)
3x2
(76.2) (50.8)
3x3
(76.2) (76.2)
3x4
(76.2) (101.6)
3x5
(76.2) (127.0)
4x2
(101.6) (50.8)
4x3
(101.6) (76.2)
4x4
(101.6) (101.6)
4x5
(101.6) (127.0)
0.63
(16.0)
0.63
(16.0)
1.14
(29.0)
1.14
(29.0)
1.14
(29.0)
1.14
(29.0)
1.14
(29.0)
1.64
(41.7)
1.64
(41.7)
1.64
(41.7)
1.64
(41.7)
2.14
(54.4)
2.14
(54.4)
2.14
(54.4)
2.14
(54.4)
2.64
(67.1)
3.14
(79.8)
3.14
(79.8)
3.14
(79.8)
3.14
(79.8)
3.14
(79.8)
4.14
(105.2)
4.14
(105.2)
4.14
(105.2)
4.14
(105.2)
0.56
(14.2)
1.06
(26.9)
1.06
(26.9)
1.62
(41.1)
2.06
(52.3)
3.06
(77.7)
4.06
(103.1)
1.62
(41.1)
2.06
(52.3)
3.06
(77.7)
4.06
(103.1)
1.06
(26.9)
2.06
(52.3)
3.06
(77.7)
4.06
(103.1)
3.06
(77.7)
1.06
(26.9)
2.06
(52.3)
3.06
(77.7)
4.06
(103.1)
5.06
(128.5)
2.06
(52.3)
3.06
(77.7)
4.06
(103.1)
5.06
(128.5)
0.69
(17.5)
0.69
(17.5)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.25
(31.8)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
1.75
(44.5)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.25
(57.2)
2.75
(69.9)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
3.25
(82.6)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
4.25
(108.0)
DIMENSIONS — Inches (mm)
D
E
F
0.38
(9.7)
0.75
(19.1)
0.75
(19.1)
1.20
(30.5)
1.63
(41.4)
2.63
(66.8)
3.63
(92.2)
1.20
(30.5)
1.63
(41.4)
2.63
(66.8)
3.63
(92.2)
0.75
(19.1)
1.63
(41.4)
2.63
(66.8)
3.63
(92.2)
2.63
(66.8)
.75
(19.1)
1.63
(41.4)
2.63
(66.8)
3.63
(92.2)
4.63
(117.6)
1.63
(41.4)
2.63
(66.8)
3.63
(92.2)
4.63
(117.6)
0.37
(9.4)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.38
(9.7)
0.31
(7.9)
0.31
(7.9)
0.31
(7.9)
0.38
(9.7)
0.80
(20.3)
0.80
(20.3)
0.80
(20.3)
0.80
(20.3)
0.80
(20.3)
1.00
(25.4)
1.00
(25.4)
0.80
(20.3)
0.80
(20.3)
1.00
(25.4)
1.00
(25.4)
0.80
(20.3)
0.80
(20.3)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
0.80
(20.3)
0.80
(20.3)
1.00
(25.4)
1.00
(25.4)
1.33
(33.8)
0.80
(20.3)
1.00
(25.4)
1.00
(25.4)
1.33
(33.8)
H
0.50
(12.7)
1.00
(25.4)
1.00
(25.4)
1.50
(38.1)
2.00
(50.8)
3.00
(76.2)
4.00
(101.6)
1.50
(38.1)
2.00
(50.8)
3.00
(76.2)
4.00
(101.6)
1.00
(25.4)
2.00
(50.8)
3.00
(76.2)
4.00
(101.6)
3.00
(76.2)
1.00
(25.4)
2.00
(50.8)
3.00
(76.2)
4.00
(101.6)
5.00
(127.0)
2.00
(50.8)
3.00
(76.2)
4.00
(101.6)
5.00
(127.0)
K
ON CENTERLINE
Dimensions are shown for reference only.
Contact customer service (see page
footnote) for specific dimensional needs.
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
0.75
(19.1)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.00
(25.4)
1.50
(38.1)
1.50
(38.1)
1.50
(38.1)
1.50
(38.1)
T
0.05
(1.3)
0.06
(1.5)
0.06
(1.5)
0.07
(1.8)
0.07
(1.8)
0.07
(1.8)
0.08
(2.0)
0.07
(1.8)
0.07
(1.8)
0.07
(1.8)
0.08
(2.0)
0.06
(1.5)
0.07
(1.8)
0.07
(1.8)
0.08
(2.0)
0.07
(1.8)
0.06
(1.5)
0.07
(1.7)
0.07
(1.8)
0.08
(2.0)
0.09
(2.3)
0.07
(1.8)
0.07
(1.8)
0.08
(2.0)
0.09
(2.3)
®
PANDUCT ® Wiring Duct
Overview
PANDUCT ® Type H Wiring Duct Dimensions
DUCT SIZE
(W x H)
A
1.5 x 2
1.75
(38.1) x (50.8)
(44.5)
1.5 x 3
1.75
(38.1) x (76.2)
(44.5)
2x2
2.17
(50.8) x (50.8)
(55.1)
2x3
2.17
(50.8) x (76.2)
(55.1)
2x4
2.17
(50.8) x (101.6) (55.1)
3x3
3.25
(76.2) x (76.2)
(82.6)
3x4
3.25
(76.2) x (101.6) (82.6)
4x4
4.25
(101.6) x (101.6) (108.0)
B
1.98
(50.3)
3.06
(77.7)
1.98
(50.3)
3.06
(77.7)
4.1
(104.1)
3.06
(77.7)
4.1
(104.1)
4.1
(104.1)
C
1.88
(47.8)
1.88
(47.8)
2.29
(58.2)
2.29
(58.2)
4.38
(111.3)
3.38
(85.9)
3.38
(85.9)
4.38
(111.3)
DIMENSIONS-Inches (mm)
D
E
F
1.63
0.31
0.80
(41.4)
(7.9)
(20.3)
2.63
0.31
1.00
(66.8)
(7.9)
(25.4)
1.57
0.31
0.80
(39.9)
(7.9)
(20.3)
2.63
0.31
0.50
(66.8)
(7.9)
(12.7)
3.63
0.31
1.00
(92.2)
(7.9)
(25.4)
2.63
0.31
1.00
(66.8)
(7.9)
(25.4)
3.63
0.31
1.00
(92.2)
(7.9)
(25.4)
3.63
0.31
1.00
(92.2)
(7.9)
(25.4)
H
1.92
(48.8)
3.00
(76.2)
1.92
(48.8)
3.00
(76.2)
4.00
(101.6)
3.00
(76.2)
4.00
(101.6)
4.00
(101.6)
K
T
0.08
(2.0)
0.10
(2.5)
0.08
(2.0)
0.10
(2.5)
0.10
(2.7)
0.10
(2.5)
0.11
(2.8)
0.11
(2.8)
On CL
Dimensions are shown for reference only.
Contact customer service (see page
footnote) for specific dimensional needs.
0.50
(12.7)
0.50
(12.7)
0.50
(12.7)
1.00
(25.4)
1.00
(25.4)
1.50
(38.1)
Control
Panel
Special
Environment
100
C
F
For 1.5", 2.0", 3", 4" wide duct.
K
D
H
C
L
K
B
T
4.0 [101.6] TYP
E
Data &
Voice
2.0
[50.8]
A
PANDUCT ® Type FL Wiring Duct Dimensions
Dimensions are shown for reference only.
Dimensions are in mm (in.). Contact
customer service (see page footnote) for
specific dimensional needs.
DUCT SIZE
(W x H)
12
(0.47)
25
(0.98)
50
(1.97)
x
x
x
x
x
x
12
(0.47)
25
(0.98)
50
(1.97)
Tools &
Accessories
Mounting Hole Dimensions
For FL12X12LG-A
25.0 TYP
[.98]
DIMENSIONS-mm (Inches)
A
B
12.5
(0.49)
25.0
(0.98)
50.0
(1.97)
5.0 TYP
[.20]
12.5
(0.49)
25.0
(0.98)
50.0
(1.97)
8.0 TYP
[.31]
12.5
[.49]
A
6.2 TYP
[.25]
Note: Type FL Duct has factory applied adhesive. For 50 x 50
two strips of tape are used; otherwise, only one strip is
centered on the part.
C
L
Technical
Info
4.0 TYP
[.16]
For FL25X25LG-A & FL50X50LG-A
A
12.5 TYP
[.49]
12.5
[.49]
C
L
B
Index
Note: ‘B’ dimension is without adhesive.
25.0 TYP
[.98]
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
F7
Wiring Duct Technical Info
Overview
PANDUCT ® Type D, G, F & FS Wiring Duct — Wirefill Capacity
ELECTRICAL
Control
Panel
Special
Environment
Data &
Voice
Tools &
Accessories
NOMINAL
DUCT SIZE
(W x H)
NOMINAL
inches
AREA in2
.5 x .5
.250
.5 x 1
.500
.5 x 2
1.000
.75 x .75
.563
.75 x 1
.750
.75 x 1.5
1.125
.75 x 2
1.500
1x1
1.000
1 x 1.5
1.500
1x2
2.000
1x3
3.000
1x4
4.000
1.5 x 1
1.500
1.5 x 1.5
2.250
1.5 x 2
3.000
1.5 x 3
4.500
1.5 x 4
6.000
2x1
2.000
2 x 1.5
3.000
2x2
4.000
2x3
6.000
2x4
8.000
2x5
10.000
2.5 x 3
7.500
3x1
3.000
3x2
6.000
3x3
9.000
3x4
12.000
3x5
15.000
4 x 1.5
6.000
4x2
8.000
4x3
12.000
4x4
16.000
4x5
20.000
6x4
24.000
8
AWG
.216
10
AWG
.153
THHN
3
6
12
7
9
14
18
12
18
24
37
49
18
28
37
55
73
24
37
49
73
98
122
92
37
73
110
147
184
73
98
147
196
245
294
THHN
6
12
24
14
18
27
37
24
37
49
73
98
37
55
73
110
146
49
73
98
146
195
244
183
73
146
220
293
366
146
195
293
391
488
586
12
AWG
.122
.158
THHN
10
19
38
22
29
43
58
38
58
77
115
154
58
86
115
173
230
77
115
154
230
307
384
288
115
230
346
461
576
230
307
461
614
768
921
MTW
6
11
23
13
17
26
34
23
34
46
69
92
34
52
69
103
137
46
69
92
137
183
229
172
69
137
206
275
343
137
183
275
366
458
549
.105
THHN
13
26
52
29
39
58
78
52
78
104
155
207
78
117
155
233
311
104
155
207
311
415
518
389
155
311
466
622
777
311
415
622
829
1037
1244
14
AWG
.139
MTW
7
15
30
17
22
33
44
30
44
59
89
118
44
67
89
133
177
59
89
118
177
237
296
222
89
177
266
355
444
177
237
355
473
592
710
.165
MTW
5
10
21
12
16
24
31
21
31
42
63
84
31
47
63
94
126
42
63
84
126
168
210
157
63
126
189
252
315
126
268
252
336
420
504
COMMUNICATION
16
AWG
.096
.125
TFFN
16
31
62
35
47
70
93
62
93
124
186
248
93
140
186
279
372
124
186
248
372
496
620
465
186
372
558
744
930
372
496
744
992
1240
1488
MTW
9
18
37
21
27
41
55
37
55
73
110
146
55
82
110
165
219
73
110
146
219
293
366
274
110
219
329
439
549
319
293
439
585
731
878
18
AWG
.084
.113
TFFN
20
40
81
46
61
91
121
81
121
162
243
324
121
182
243
364
486
162
243
324
486
648
810
607
243
486
729
972
1215
486
648
972
1296
1620
1944
MTW
11
22
45
25
34
50
67
45
67
90
134
179
67
101
134
201
269
90
134
179
269
358
448
336
134
269
403
537
671
269
358
537
716
895
1074
22
AWG
.065
MTW
34
68
135
76
101
152
203
135
203
270
406
541
203
304
406
609
811
270
406
541
811
1082
1352
1014
406
811
1217
1623
2029
811
1082
1623
2164
2705
3246
.217
24
AWG
.250
UTP/CM
CAT 5e
STP/CM
CAT 6
UTP/CM
3
6
12
7
9
14
18
12
18
24
36
49
18
27
36
55
73
24
36
49
73
97
121
91
36
73
109
146
182
73
97
146
194
243
291
2
5
9
5
7
10
14
9
14
18
27
37
14
21
27
41
55
18
27
37
55
73
91
69
27
55
82
110
137
55
73
110
146
183
219
1
2
3
2
2
4
5
3
5
6
10
13
5
7
10
14
19
6
10
13
19
26
32
24
10
19
29
39
48
19
26
39
51
64
77
.422
Not all sizes available for each duct type.
See page F14 for wiring duct color and size availability.
Wirefill is based on 50% cross-sectional area.
Formula used to
calculate fill capacity:
Number of Wires =
Duct W x H
1.75 x (Wire O.D.)2
See page F11 for explanation of wirefill formula.
Technical
Info
Formula to approximate
wiring duct size needed:
1. Determine the number of wires the duct will need to contain.
2. Determine the wire outside diameter (for multiple wires see formula at left.
3. Calculate the necessary wire area using the following formula:
Wire Area = Number of Wires x [1.75 x (Wire O.D.)2]
Wire O.D. for multiple wire types:
Wire
O.D.
Index
=
Σ (Number of Wires x Wire O.D.)
Number of Wires
Example:
15 wires with .165" O.D =
28 wires with .065" O.D. =
16 wires with .125" O.D. =
59
6.295 –: 59 = Wire O.D.
F8
15 x .165
285 x .065
16 x .125
total wires
=
=
=
=
=
2.475
1.820
2.000
6.295
.107
Example: Wire Area = 59 x [1.75 x (.107) 2] = 59 x .020 = 1.182
4. Choose a Duct with W x H equal to or greater than the result from step 3.
Area of Selected Duct >
= Calculated Wire Area
Example: For Duct Size .75" x 1.5" Duct Area = .75 x 1.5 = 1.125 sq. in.
(No good 1.125 < 1.182)
For Duct Size 1.5" x 1" Duct Area = 1.5 x 1 = 1.1500 sq. in.
(Good 1.500 > 1.182)
In the above example 1" x 1.5" duct or larger could also be used.
®
PANDUCT ® Wiring Duct
Overview
PANDUCT ® Type MC, NNC & TMC Wiring Duct — Wirefill Capacity
ELECTRICAL
NOMINAL
DUCT SIZE NOMINAL
AREA
(W x H)
mm2
mm.
25 x 25
625
25 x 37
925
25 x 50
1250
25 x 62
1550
25 x 75
1875
37 x 37
1369
37 x 50
1850
37 x 62
2294
37 x 75
2775
50 x 50
2500
50 x 75
3750
50 x 100
5000
62 x 37
62 x 62
75 x 50
75 x 62
75 x 75
75 x 100
100 x 50
100 x 62
100 x 75
100 x100
2294
3844
3750
4650
5625
7500
5000
6200
7500
10000
8
AWG
.216
10
AWG
.153
12
AWG
.122
.158
.105
14
AWG
.139
.165
COMMUNICATION
16
AWG
.096
.125
18
AWG
.084
.113
22
AWG
.065
.217
24
AWG
.250
.422
UTP/CM
CAT 5e
STP/CM
CAT 6
UTP/CM
12
17
24
29
35
26
35
43
52
47
71
94
9
13
18
22
27
19
26
33
39
35
53
71
3
5
6
8
9
7
9
11
14
12
19
25
43
72
71
87
106
141
94
117
141
188
33
54
53
66
80
106
71
88
106
142
11
19
19
23
28
37
25
31
37
50
THHN
12
18
24
29
36
26
35
44
53
47
71
95
THHN
24
35
47
59
71
52
70
87
105
95
142
189
THHN
37
55
74
92
112
81
110
136
165
149
223
298
MTW
22
33
44
55
67
49
66
81
98
89
133
177
THHN
50
74
100
125
151
110
149
184
223
201
301
402
MTW
29
42
57
71
86
63
85
105
127
115
172
229
MTW
20
30
41
50
61
45
60
75
90
81
122
163
THHN
60
89
120
149
180
132
178
220
267
240
360
481
MTW
35
52
71
88
106
78
105
130
157
142
213
283
THHN
78
116
157
195
235
172
232
288
348
314
471
628
MTW
43
64
87
108
130
95
128
159
193
173
260
347
MTW
131
194
262
325
393
287
388
481
582
524
786
1048
44
73
71
88
107
142
95
118
142
190
87
145
142
176
213
284
189
235
284
378
136
229
223
277
335
446
298
369
446
595
81
136
133
165
200
266
177
220
266
355
184
309
301
374
452
603
402
498
603
803
105
176
172
213
258
344
229
284
344
458
75
125
122
151
183
244
163
202
244
325
220
369
360
447
541
721
481
596
721
961
130
218
213
264
319
425
283
351
425
567
288
483
471
584
706
941
628
778
941
1255
159
267
260
323
390
520
347
430
520
694
481
806
786
975
1179
1572
1048
1300
1572
2096
18 AWG
.084
.113
22
AWG
.065
.217
24 AWG
.250
.422
UTP/CM
CAT 6
UTP/CM
Control
Panel
Special
Environment
Data &
Voice
Not all sizes available for each duct type.
See page F14 for wiring duct color and size availability.
Wirefill is based on 50% cross-sectional area.
PANDUCT ® Type H Wiring Duct — Wirefill Capacity
ELECTRICAL
10
AWG
.153
NOMINAL
8 AWG
DUCT
NOMINAL .216
SIZE
AREA
(W X H)
THHN THHN
in2
inches
12 AWG
.122
.158
.105
14 AWG
.139
.165
NETWORK CABLES
16 AWG
.096
.125
THHN
MTW
THHN
MTW
MTW
THHN
MTW
THHN
MTW
MTW
UTP/CM
CAT 5e
1.5 X 2
3.000
34
69
108
64
147
83
59
175
103
229
126
383
34
25
9
1.5 X 3
4.500
52
103
163
97
220
125
89
263
155
344
190
575
51
38
13
2X2
4.000
46
92
145
86
196
111
79
234
138
306
169
511
45
34
12
2X3
6.000
69
138
217
129
294
167
119
351
207
459
253
767
68
51
18
2X4
8.000
92
184
290
173
392
223
158
469
276
612
338
1023
91
69
24
3X3
9.000
104
207
326
194
441
251
178
527
311
689
380
1151
103
77
27
3X4
12.000
139
277
435
259
588
335
238
703
415
919
507
1535
137
103
36
4X4
16.000
185
369
581
346
784
447
317
938
553
1225
677
2047
183
138
48
Tools &
Accessories
Technical
Info
Wirefill is based on 50% cross-sectional area.
PANDUCT ® Type FL Wiring Duct — Wirefill Capacity
ELECTRICAL
10 AWG 12 AWG
NOMINAL
.153
.122
DUCT SIZE NOMINAL
AREA
(W x H)
2
THHN THHN
mm
mm
144
3
5
25 x 25
625
12
19
50 x 50
2500
43
67
12 x 12
Index
Wirefill is based on 50% cross-sectional area.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
F9
Wiring Duct Technical Info
Overview
PANDUCT ® Type NE Wiring Duct — Wirefill Capacity
ELECTRICAL
Control
Panel
Special
Environment
Data &
Voice
NOMINAL
DUCT SIZE
(W x H)
NOMINAL
inches
AREA in2
.5 x .5
.250
.5 x 1
.500
1x1
1.000
1 x 1.5
1.500
1x2
2.000
1x3
3.000
1x4
4.000
1.5 x 1.5
2.250
1.5 x 2
3.000
1.5 x 3
4.500
1.5 x 4
6.000
2x1
2.000
2x2
4.000
2x3
6.000
2x4
8.000
2.5 x 3
7.500
3x1
3.000
3x2
6.000
3x3
9.000
3x4
12.000
3x5
15.000
4x2
8.000
4x3
12.000
4x4
16.000
4x5
20.000
8
AWG
.216
THHN
3
5
11
16
21
32
43
24
32
48
64
21
43
64
86
80
32
64
96
129
161
86
129
171
214
10
AWG
.153
THHN
5
11
21
32
43
64
85
48
64
96
128
43
85
128
171
160
64
128
192
256
320
171
256
342
427
12
AWG
.122
.158
THHN
8
17
34
50
67
101
134
76
101
151
202
67
134
202
269
252
101
202
302
403
504
269
403
537
672
MTW
5
10
20
30
40
60
80
45
60
90
120
40
80
120
160
150
60
120
180
240
300
160
240
320
401
.105
THHN
11
23
45
68
91
136
181
102
136
204
272
91
181
272
363
340
136
272
408
544
680
363
544
726
907
14
AWG
.139
MTW
6
13
26
39
52
78
104
58
78
116
155
52
104
155
207
194
78
155
233
311
388
207
311
414
518
.165
MTW
5
9
18
28
37
55
73
41
55
83
110
37
73
110
147
138
55
110
165
220
275
147
220
294
367
COMMUNICATION
16
AWG
.096
.125
TFFN
14
27
54
81
109
163
217
122
163
244
326
109
217
326
434
407
163
326
488
651
814
434
651
868
1085
MTW
8
16
32
48
64
96
128
72
96
144
192
64
128
192
256
240
96
192
288
384
480
256
384
512
640
18
AWG
.084
.113
TFFN
18
35
71
106
142
213
283
159
213
319
425
142
283
425
567
531
213
425
638
850
1063
567
850
1134
1417
MTW
10
20
39
59
78
117
157
88
117
176
235
78
157
235
313
294
117
235
352
470
587
313
470
627
783
22
AWG
.065
MTW
30
59
118
178
237
355
473
266
355
533
710
237
473
710
947
888
355
710
1065
1420
1775
947
1420
1893
2367
.217
24
AWG
.250
.422
UTP/CM
CAT 5e
STP/CM
CAT 6
UTP/CM
3
5
11
16
21
32
42
24
32
48
64
21
42
64
85
80
32
64
96
127
159
85
127
170
212
2
4
8
12
16
24
32
18
24
36
48
16
32
48
64
60
24
48
72
96
120
64
96
128
160
1
1
3
4
6
8
11
6
8
13
17
6
11
17
22
21
8
17
25
34
42
22
34
45
56
Wirefill is based on 50% cross-sectional area.
Formula used to
calculate fill capacity:
Tools &
Accessories
1. Determine the number of wires the duct will need to contain.
2. Determine the wire outside diameter (for multiple wires see formula at left.
3. Calculate the necessary wire area using the following formula:
Wire Area = Number of Wires x [2 x (Wire O.D.)2]
Wire O.D. for multiple wire types:
Wire
O.D.
=
Σ (Number of Wires x Wire O.D.)
Number of Wires
Example:
15 wires with .165" O.D = 15 x .165
28 wires with .065" O.D. = 285 x .065
16 wires with .125" O.D. = 16 x .125
59 total wires
6.295 –: 59 = Wire O.D.
Index
F10
Duct W x H
2.00 x (Wire O.D.)2
See page F11 for explanation of wirefill formula.
Formula to approximate
wiring duct size needed:
Technical
Info
Number of Wires =
=
=
=
=
=
2.475
1.820
2.000
6.295
.107
Example: Wire Area = 59 x [2 x (.107) 2] = 59 x .020 = 1.357
4. Choose a Duct with W x H equal to or greater than the result from step 3.
Area of Selected Duct >
= Calculated Wire Area
Example: For Duct Size .75" x 1.5" Duct Area = .75 x 1.5 = 1.125 sq. in.
(No good 1.125 < 1.1357
For Duct Size 1.5" x 1" Duct Area = 1.5 x 1 = 1.1500 sq. in.
(Good 1.500 > 1.357)
In the above example 1" x 1.5" duct or larger could also be used.
®
PANDUCT ® Wiring Duct
Overview
Wirefill Formula
(Flush cover duct Types G, F, FS, D, H, MC, NNC, & TMC)
General Formula
PANDUIT ® Wiring Duct wirefills are calculated using the following general formula:
Control
Panel
Why use a 50% Wirefill?
As specified in NFPA79-2002 section 14.5.2, Percentage Fills of Raceways (Ducts), a 50% wirefill is given as
the maximum wirefill capacity in all PANDUIT ® Wiring Ducts. This helps ensure general safe wiring practices
are followed. In actual practice, a 50% wirefill is the maximum amount of wiring the duct can hold given the
additional airspace created between cables by non-uniform cable shapes, cable interlacing and cable
packing factors.
Special
Environment
What is the Usable Duct Area?
The usable area we define as the calculation of internal area that can be occupied by wires or cables.
Calculation of Internal Area
Air Space Allotment
In our wirefill formula an
adjustment is made to the
channel internal area to
account for “unusable” air
space that will be present
between cables when placed
in the channel. Our formula
assumes a uniform close
packed or high-density cable
arrangement (see diagram).1
Since we use the outer
channel dimensions in
our calculation we
make an adjustment in
our formula for the
thickness of material
and for design elements
that extend inside
the channel.
Considering these factors the usable duct area is equal to an average of 90% of the nominal area, or
(W x H) x .90.
Voice &
Data
Tools &
Accessories
Wire Area
The wire area formula is converted to allow calculation using the cable diameter:
Technical
Info
Formula Derivation
Inserting the elements from above into the
general formula results in the following:
Simplifying this formula results in the formula
used for wire fill calculation2:
NOTE: When calculating wirefill capacity using the above formula, variables W, H, and D must be expressed in
same units (i.e. mm or inches).
1
2
Index
This calculation does not account for additional airspace created between cables by non-uniform cable shapes, cable interlacing and cable packing factors.
The resulting formula is used for all PANDUIT ® Flush Cover Ducts, this excludes Type NE duct which has a different profile design that results in a
divisor of 2.0 x D 2 (rather than 1.75 x D 2 as shown here) to be used in the wirefill calculation formula.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
F11
Overview
Wiring Duct Technical Info
PANDUCT ® Wiring Duct and Raceway — UL94 Vertical Burn Test*
Flammability
Control
Panel
This test method
measures the comparative
burning characteristics of
solid plastic materials.
Materials Classed V-0 Shall:
• After flame for each sample does not exceed 10 seconds following the
removal of each flame application
• Total afterflame time for a set of five samples following both flame
application is not greater than 50 seconds
• Afterflame plus afterglow time for each sample does not exceed 30
seconds following the second flame application
• The sample does not exhibit afterflame or afterglow up to the
holding clamp
Special
Environment
• The cotton indicator below the sample does not ignite from flaming
particles or droplets from the test sample
UL Vertical
Burning Test
Voice &
Data
Tools &
Accessories
Technical
Info
Test samples measure
125mm by the 13mm by
the minimum thickness of
the end product. Tests
are conducted utilizing
unaged samples (as
manufactured) and aged
samples (7 days
@70°C/158°F). A
standard test flame is
applied for two 10
second applications to
the unsupported end of
avertically clamped
sample. The after-flame
is recorded following the
first flame application.
Both after-flame and
afterglow times are
recorded following the
second flame application.
Also observed and
documented are, if the
sample drips flaming
particles that ignite the
cotton layer below.
Materials Classed V-1 Shall:
• Not have any specimens which burn with flaming combustion for more
than 30 seconds after either application of the test flame
• Not have a total flaming combustion time exceeding 250 seconds for
each set of five specimens
• Not have any specimens with glowing combustion, which persists for
more than 60 seconds after the second removal of the test flame
• Not have any specimens which burn with flaming or glowing
combustion up to the holding clamp
• Not have any specimens which drip flaming particles that ignite the
cotton indicator below the test specimen
Materials Classed V-2 Shall:
• Not have any specimens which burn with flaming combustion for more
than 30 seconds after either application of the test flame
• Not have a total flaming combustion time exceeding 250 seconds
each set of five specimens
• Not have any specimens with glowing combustion which persists for more
than 60 seconds after the second removal of the test flame
• Not have any specimens which burn with flaming or glowing combustion
up to the holding clamp
• Be permitted to have specimens which drip flaming particles which ignite
the cotton indicator below the test specimen
Index
* The flammability rating determined from this method does not indicate its performance in
end-user applications.
F12
Wiring Duct Technical Info
Overview
PANDUCT ® Wiring Duct and Raceway — Color and Size Selection
Control
Panel
Special
Environment
Voice &
Data
Tools &
Accessories
Technical
Info
Duct Size
WxH
(inches)
.5 x .5
.5 x 1
.5 x 2
.5 x 4
.75 x .75
.75 x 1
.75 x 1.5
.75 x 2
1x1
1 x 1.5
1x2
1 x 2.5
1x3
1x4
1.5 x 1
1.5 x 1.5
1.5 x 2
1.5 x 2.5
1.5 x 3
1.5 x 4
2x1
2 x 1.5
2x2
2x3
2x4
2x5
2.5 x 1.5
2.5 x 2.5
2.5 x 3
3x1
3x2
3 x 2.5
3x3
3x4
3x5
4 x 1.5
4x2
4 x 2.5
4x3
4x4
4x5
6x4
LG
Light Gray
G
G
G
G
G
G
G
G
G
G
G
F FS
F FS
F FS
F FS
F
D
NNC25X25mm
NNC25X37mm
NNC25X50mm
G
G
G
G
G
F
F
F
F
F
FS D
D
FS
FS
FS D H
NNC25X75mm
G
G
G
G
G
G
G
G
F
F
F
F
F
F
F
F
FS D
D
FS
FS
FS D
FS D
D
F FS
F
H
H
H
H
NNC37X37mm
NNC37X50mm
DG
Dark
Gray
WH
White
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
NNC37X75mm
G
G
G
G
NNC50X50mm G
NNC50X75mm G
NNC50X100mm G
G
F
F
BL
Black
IB
Intrinsic
Blue*
BR
Beige
IG
International
Gray
NE
NE
F FS
F
F FS
F
F
F
F FS
F FS
F
F
F
F
F
F
F
F
G
G
G
G
D
G
G
D
D
G
G
D H
NE
NE
NE
NNC25X25mm
NNC25X37mm
NNC25X50mm
G
G
G
D NE
D NE
NNC25X75mm
G
H
NNC37X37mm
NNC37X50mm
G
H
NNC37X75mm
H
H
H
G
NNC50X50mm G FS G FS D H
NNC50X75mm G
G
D H
NNC50X100mm G
G
D H
G
NE
NE
D NE
D NE
FS
NE
FS
FS D NE
FS D NE
D NE
G
G
G
G
G
G
TMC25X37mm
G
TMC37X37mm
MC37X37mm
MC37X50mm
MC37X62mm
MC37X75mm
TMC50X50mm
MC50X50mm
MC50X75mm
MC50X100mm
D H
D
G
G
MC25X25mm
MC25X37mm
MC25X50mm
MC25X62mm
MC25X75mm
MC62X37mm
MC62X62mm
G
G
G
D
F FS
F FS D
G
G
G
G
G
G
G
G
F FS D H
F FS D H
F FS
FS
F FS D
G
G
G
G
NNC100X50mm G
F FS D NE
F FS D NE
F FS
NE
G
G
G
G
F FS D
NNC100X75mm G
F FS D H NNC100X100mm G
F FS
G
FS
G
F FS
NE
F FS D NE
F
NE
NNC75X75mm
F FS
F FS
F FS
NE
NE
NE
NE
G
G
H
H
G FS
NNC75X5mm
G FS G FS D H
G
G
D H
G
G
G
NNC100X50mm
G
D
NNC100X75mm G
G
H NNC100X100mm G FS G FS D H
G
G
G
TMC75X50mm
G
G
G
TMC75X75mm
MC75X50mm
MC75X62mm
MC75X75mm
MC75X100mm
TMC100X50mm MC100X50mm
MC100X62mm
TMC100X75mm MC100X75mm
MC100X100mm
*Intrinsic Blue Color — IB
Intrinsic Blue wiring duct is made from the same PVC material as our standard PVC duct. Intrinsic Blue is an internationally
recognized standard blue color that identifies the wiring duct as “incapable of releasing sufficient electrical or thermal
energy under normal or abnormal conditions to cause ignition of a specific hazardous atmospheric mixture in its most easily
ignited concentrations.”
*ISA-RD12.6 (Instrument Society of America)
Index
F14
Wiring Duct Technical Info
Overview
PANDUCT ® Wiring Duct and Raceway — Color and Size Selection
Control
Panel
Special
Environment
Voice &
Data
Tools &
Accessories
Technical
Info
Duct Size
WxH
(inches)
.5 x .5
.5 x 1
.5 x 2
.5 x 4
.75 x .75
.75 x 1
.75 x 1.5
.75 x 2
1x1
1 x 1.5
1x2
1 x 2.5
1x3
1x4
1.5 x 1
1.5 x 1.5
1.5 x 2
1.5 x 2.5
1.5 x 3
1.5 x 4
2x1
2 x 1.5
2x2
2x3
2x4
2x5
2.5 x 1.5
2.5 x 2.5
2.5 x 3
3x1
3x2
3 x 2.5
3x3
3x4
3x5
4 x 1.5
4x2
4 x 2.5
4x3
4x4
4x5
6x4
LG
Light Gray
G
G
G
G
G
G
G
G
G
G
G
F FS
F FS
F FS
F FS
F
D
NNC25X25mm
NNC25X37mm
NNC25X50mm
G
G
G
G
G
F
F
F
F
F
FS D
D
FS
FS
FS D H
NNC25X75mm
G
G
G
G
G
G
G
G
F
F
F
F
F
F
F
F
FS D
D
FS
FS
FS D
FS D
D
F FS
F
H
H
H
H
NNC37X37mm
NNC37X50mm
DG
Dark
Gray
WH
White
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
NNC37X75mm
G
G
G
G
NNC50X50mm G
NNC50X75mm G
NNC50X100mm G
G
F
F
BL
Black
IB
Intrinsic
Blue*
BR
Beige
IG
International
Gray
NE
NE
F FS
F
F FS
F
F
F
F FS
F FS
F
F
F
F
F
F
F
F
NE
NE
NE
NNC25X25mm
NNC25X37mm
NNC25X50mm
G
G
G
D NE
D NE
NNC25X75mm
G
NNC37X37mm
NNC37X50mm
G
NE
NE
D NE
D NE
FS
NE
FS
FS D NE
FS D NE
D NE
H
NNC37X75mm
H
H
H
G
G
G
G
G
G
D
G
G
D
D
G
G
D H
G
G
G
G
TMC25X37mm
G
TMC37X37mm
MC37X37mm
MC37X50mm
MC37X62mm
MC37X75mm
TMC50X50mm
MC50X50mm
MC50X75mm
MC50X100mm
D H
D
G
NNC50X50mm G FS G FS D H
NNC50X75mm G
G
D H
NNC50X100mm G
G
D H
G
G
G
MC25X25mm
MC25X37mm
MC25X50mm
MC25X62mm
MC25X75mm
MC62X37mm
MC62X62mm
G
G
G
D
F FS
F FS D
G
G
G
G
G
G
G
G
F FS D H
F FS D H
F FS
FS
F FS D
G
G
G
G
NNC100X50mm G
F FS D NE
F FS D NE
F FS
NE
G
G
G
G
F FS D
NNC100X75mm G
F FS D H NNC100X100mm G
F FS
G
FS
G
F FS
NE
F FS D NE
F
NE
NNC75X75mm
F FS
F FS
F FS
NE
NE
NE
NE
G
G
H
H
G FS
NNC75X5mm
G FS G FS D H
G
G
D H
G
G
G
NNC100X50mm
G
D
NNC100X75mm G
G
H NNC100X100mm G FS G FS D H
G
G
G
TMC75X50mm
G
G
MC75X50mm
MC75X62mm
TMC75X75mm MC75X75mm
MC75X100mm
TMC100X50mm MC100X50mm
MC100X62mm
TMC100X75mm MC100X75mm
MC100X100mm
*Intrinsic Blue Color — IB
Intrinsic Blue wiring duct is made from the same PVC material as our standard PVC duct. Intrinsic Blue is an internationally
recognized standard blue color that identifies the wiring duct as “incapable of releasing sufficient electrical or thermal
energy under normal or abnormal conditions to cause ignition of a specific hazardous atmospheric mixture in its most easily
ignited concentrations.”
*ISA-RD12.6 (Instrument Society of America)
Index
F14
®
PANDUCT ® Wiring Duct
Overview
Installation Tips:
Application of Latex Paint on PANDUCT ® Wiring Duct
The following is recommended to properly prepare the surface of the
wiring duct/raceway and covers for the best adhesion of latex paint:
1. Clean surface with mild soap and water solution or mineral spirits
with a clean lint free towel. Allow to dry.
Control
Panel
2. Using a sanding pad (such as synthetic stripping pad or medium/fine
steel wool), slightly roughen the surface to be painted.
3. Apply a coat of all-purpose 100% Acrylic primer and allow to dry.
4. Apply the desired topcoat of latex paint and allow to dry.
5. Install the wiring duct/raceway and covers.
Cutting Wiring Duct and Cover
Special
Environment
For small quantities, use the DCT Duct Cutting Tool on page E14. For larger quantities use a miter cutting
saw blade for clean burr-free cuts. Recommended Blade: Carbide 80T or 100T; .90" thickness, .125 kerf.
Recommended Precaution when Using Type NNC and NE Wiring Duct
Cleaning solvents and cutting fluids that contain any of the following chemical agents should not come in
contact with Type NNC or Type NE wiring duct. These chemicals are known to cause stress cracking in the
halogen free PPO material.
• Hydrocarbons
Voice &
Data
• Phenols
• Ketones
• Amines
• Ethers
• Organic, Inorganic and Oxidizing Acids
• Petrol
Note: PANDUIT ® assumes no liability for the accuracy or completeness of this list.
Tools &
Accessories
Assured Quality
To assure optimum quality, PANDUIT ® products are designed and manufactured to meet applicable
international, UL and customer standards:
The International Standards Organization (ISO) establishes worldwide standards for
products and services in recognition of increasing globalization of markets. ISO
program sets up the requirements for quality assurance systems of these worldwide
standards. PANDUIT ® is registered to ISO 9001, the most comprehensive model in
the standard, meant for companies who design, manufacture, install and service the
products they sell. Registration has been awarded by Underwriters Laboratories
(Certificate No. A2269) after extensive audit of QA systems employed at PANDUIT ®.
ISO 14001 is a voluntary standard for Environmental Management Systems
established by the International Standards Organization. The international standard
provides a benchmark for continual improvement in environmental performance.
Business partners can be confident that PANDUIT ® manufacturing facilities around
the globe are engaged in an on-going process to maximize value while minimizing
impact on global natural resources.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Technical
Info
Index
F15
Overview
Wiring Duct Technical Info
Agency Approvals
File No. E147128
Control
Panel
File No. 016446, 210335
All PANDUIT ® wiring duct is recognized by Underwriters Laboratory as meeting the
requirements set forth in UL Standard 1565 “Positioning Devices.” Underwriters
Laboratory is an independent, not-for-profit organization that investigates, tests and
certifies thousands of products and materials for electrical safety.
The Canadian Standards Association as meeting the applicable requirements in CSA
Standard C22.2 No. 18.5 certifies all PANDUIT ® wiring duct. The Canadian Standard
Association is a not-for-profit association serving business, industry, government and
consumers in Canada and the global marketplace.
Most PANDUIT ® wiring duct carries the CE (Conformite European) Marking indicating
it meets the essential requirements of all relevant European Directives.
Special
Environment
Standards
PANDUIT ® Wiring Duct Compliant with National Fire Protection Agency 79-2002
Voice &
Data
PANDUIT ® has completed material testing with compliant results per IEC 60332-1 test method (Tests on
Electric Cables Under Fire Conditions). Results show PANDUIT ® wiring ducts are manufactured with
flame-retardant materials (as defined). This testing was required in order to comply with stricter requirements
included in the NFPA-79-2002 Electrical Standard for Industrial Machinery. Section 14.3.1 in the standard
states that “Nonmetallic ducts shall be permitted [inside enclosures] only when they are made with a flameretardant material.” Flame-retardant material is defined in the standard by the IEC 60332-1 test method.
As specified in NFPA79-2002 section 14.5.1.4, PANDUIT ® Wiring Duct publishes a maximum percentage wire
fill for common wire types equal to 50 percent of the interior cross-sectional area of the duct.
PANDUIT ® bend radius control accessories can be mounted at right angle and tee junctions created using
wiring duct in order to maintain cable bend radius control as is specified in NFPA79-2002 section 14.1.4.9.
Tools &
Accessories
PANDUIT ® PVC Divider Wall Compliant with UL508/UL508A Standards for Industrial Equipment/
Industrial Control Panels
Separation of circuits is required under certain installation practices within a control panel. As required in
UL508/UL508A a factory-installed conductor shall be separated from a conductor used in a different circuit when
the conductors are not insulated for the maximum voltage of either circuit. In an installation where separation
utilizing the method of air spacing is not appropriate, an insulating barrier (such as wiring duct with divider wall)
is allowed. The barrier shall be manufactured from an insulating material exhibiting minimum properties
described in UL508, section 15. These properties include High Current Arc Resistance to Ignition (HAI), Hot
Wire Ignition (HWI), Comparative Tracking Index (CTI), electrical Relative Thermal Index (RTI) and flame class.
PANDUIT ® PVC divider wall material is compliant with UL508, section 15.
Technical
Info
PANDUIT ® Wiring Duct Compliant with DIN 43 659
This European standard specifies dimensions for slotted trunkings that will be used in electrical switchgear
assemblies and that conform to the corresponding requirements in DIN VDE 0660 Part 506. The dimensions
specified within the standard include:
• The channel mounting hole pattern
• The distance from first to last like size mounting hole
• Mounting hole slot dimensions
• Minimum overall product length
• Mounting hole pitch and location
PANDUIT ® Type MC, TMC, and NNC wiring duct conform to this standard.
Index
F16
®
PANDUCT ® Wiring Duct
Overview
PANDUCT ® Wiring Duct
Alphanumeric Part Number Index
Page
Number
Part Number
ABM112-A-C
ABM2S-A-C .
ABMM-A-C . .
ABMT-A-C . . .
ABMT-A-C20 .
ABMT-S6-C . .
ABMT-S6-C20
C.5LG6 . . . . .
C.75BL6 . . . .
C.75LG6 . . . .
C1.5BL6 . . . .
C1.5LG6 . . . .
C100IG2 . . . .
C1BL6 . . . . .
C1LG6 . . . . .
C2.5BL6 . . . .
C2.5LG6 . . . .
C25IG2 . . . . .
C2BL6 . . . . .
C2LG6 . . . . .
C37IG2 . . . . .
C3BL6 . . . . .
C3LG6 . . . . .
C4BL6 . . . . .
C4LG6 . . . . .
C50IG2 . . . . .
C62IG2 . . . . .
C6LG6 . . . . .
C75IG2 . . . . .
CS1BL6 . . . .
CS1LG6 . . . .
CS1WH6 . . .
CSC1BL6 . . .
CSC1LG6 . . .
CSC1WH6 . .
CSP1.5LG-Q
CSP1LG-Q . .
CSP2LG-Q . .
CSP3LG-Q . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
C
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . .E11
. . . . . . . .E11
. . . . . . . .E11
. . . . . . . .D13
. . . . . . . .D13
. . . . . . . .D13
. . . . . . . .D13
. . . .B4,B6,D8
. . . . . . . .D10
. . . .B4,B6,D8
. . . . . . . .D10
.B4,B6,B8,D8
. . . . . . . .B10
. . . . . . . .D10
.B4,B6,B8,D8
. . . . . . . .D10
. . . . . .B4,B8
. . . . . . . .B10
. . . . . . . .D10
.B4,B6,B8,D8
. . . . . . . .B10
. . . . . . . .D10
.B4,B6,B8,D8
. . . . . . . .D10
.B4,B6,B8,D8
. . . . . . . .B10
. . . . . . . .B10
. . . . . .B4,D8
. . . . . . . .B10
. . . . . . . . .E8
. . . . . . . . .E8
. . . . . . . . .E8
. . . . . . . .D11
. . . . . . . .D11
. . . . . . . .D11
. . . . . . . . .E8
. . . . . . . . .E8
. . . . . . . . .E8
. . . . . . . . .E8
Page
Number
Part Number
CSP4LG-Q . . .
CSPC1.5LG-Q
CSPC1LG-Q . .
CSPC2LG-Q . .
CSPC3LG-Q . .
CSPC4LG-Q . .
D1.5H6 . . . . .
D1.5X2LG6 . .
D1.5X3LG6 . .
D1.5X4LG6 . .
D1H6 . . . . . .
D1X2LG6 . . .
D1X3LG6 . . .
D1X4LG6 . . .
D2.5X3LG6 . .
D2H6 . . . . . .
D2X2LG6 . . .
D2X3LG6 . . .
D2X4LG6 . . .
D3H6 . . . . . .
D3X2LG6 . . .
D3X3LG6 . . .
D3X4LG6 . . .
D4H6 . . . . . .
D4X2LG6 . . .
D4X3LG6 . . .
D4X4LG6 . . .
D50H2 . . . . .
D75H2 . . . . .
D100H2 . . . .
DB-C . . . . . .
DCT . . . . . . .
DCT-BLD . . .
DCT-RI . . . . .
DFCT . . . . . .
DJS1LG6 . . .
DJS1WH6 . . .
DJSP1.5LG-Q
DJSP2LG-Q .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
D
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Control
Panel
. . . . . . . . .E8
. . . . . . . .D11
. . . . . . . .D11
. . . . . . . .D11
. . . . . . . .D11
. . . . . . . .D11
Special
Environment
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . .E5
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .E5
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .E5
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .E5
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .E5
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .B8
. . . . . . . . .E5
. . . . . . . . .E5
. . . . . . . . .E5
. . . . . . . . .E6
. . . . . . . .E13
. . . . . . . .E13
. . . . . . . .E13
. . . . . . . .E13
. . . . . . . . .E8
. . . . . . . . .E8
. . . . . . . . .E8
. . . . . . . . .E8
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Data &
Voice
Tools &
Accessories
Technical
Info
Index
G1
Overview
Wiring Duct Index
Page
Number
Part Number
Control
Panel
Special
Environment
Voice &
Data
Tools &
Accessories
Technical
Info
Index
G2
DJSP3LG-Q . . . . . . . . . . . . . . . . . . . . . . .E8
DJSP4LG-Q . . . . . . . . . . . . . . . . . . . . . . .E8
DNT-100 . . . . . . . . . . . . . . . . . . . . . . . . .E14
F.5X.5LG6 . . . .
F.5X1LG6 . . . .
F.75X.75LG6 . .
F.75X1.5LG6 . .
F1-C . . . . . . . .
F1.5X1.5LG6 .
F1.5X1LG6 . . .
F1.5X2LG6 . . .
F1.5X3LG6 . . .
F1.5X4LG6 . . .
F1X1.5LG6 . . .
F1X1LG6 . . . .
F1X2LG6 . . . .
F1X3LG6 . . . .
F1X4LG6 . . . .
F2-C . . . . . . . .
F2X1.5LG6 . . .
F2X1LG6 . . . .
F2X2LG6 . . . .
F2X3LG6 . . . .
F2X4LG6 . . . .
F2X5LG6 . . . .
F3-C . . . . . . . .
F3X1LG6 . . . .
F3X2LG6 . . . .
F3X3LG6 . . . .
F3X4LG6 . . . .
F3X5LG6 . . . .
F4-C . . . . . . . .
F4X2LG6 . . . .
F4X3LG6 . . . .
F4X4LG6 . . . .
F4X5LG6 . . . .
FL12X12LG-A .
FL25X25LG-A .
FL50X50LG-A .
FMWR-C . . . .
FS.5X.5LG6NM
FS.5X1LG6NM
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
F
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . .E10
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . .E10
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . .E10
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . .E10
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .B6
. . . . . . . . .E4
. . . . . . . . .E4
. . . . . . . . .E4
. . . . . . . . .E7
. . . . . . . . .D8
. . . . . . . . .D8
Page
Number
Part Number
FS.75X.75LG6NM
FS1.5X1.5LG6NM
FS1.5X1LG6NM .
FS1.5X2LG6NM .
FS1.5X3LG6NM .
FS1X1.5LG6NM .
FS1X1LG6NM . .
FS1X2LG6NM . .
FS1X3LG6NM . .
FS1X4LG6NM . .
FS2X1.5LG6NM .
FS2X1LG6NM . .
FS2X2LG6NM . .
FS2X3LG6NM . .
FS2X4LG6NM . .
FS3X1LG6NM . .
FS3X2LG6NM . .
FS3X3LG6NM . .
FS3X4LG6NM . .
FS3X5LG6NM . .
FS4X2LG6NM . .
FS4X3LG6NM . .
FS4X4LG6NM . .
FS4X5LG6NM . .
FS6X4LG6NM . .
FWR-C . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .D8
. . . . . . . . .E7
G.5X.5LG6 . .
G.5X1LG6 . .
G.5X2LG6 . .
G.5X4LG6 . .
G.75X.75LG6
G.75X1.5LG6
G.75X1LG6 . .
G.75X2BL6 . .
G.75X2LG6 . .
G1.5X1.5BL6
G1.5X1.5LG6
G1.5X1LG6 . .
G1.5X2BL6 . .
G1.5X2LG6 . .
G1.5X3BL6 . .
G1.5X3LG6 . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
G
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
®
PANDUCT ® Wiring Duct
Overview
Page
Number
Part Number
G1.5X4BL6
G1.5X4LG6
G1X1.5BL6
G1X1.5LG6
G1X1BL6 .
G1X1LG6 .
G1X2BL6 .
G1X2LG6 .
G1X3BL6 .
G1X3LG6 .
G1X4BL6 .
G1X4LG6 .
G2.5X3BL6
G2.5X3LG6
G2X1.5LG6
G2X1BL6 .
G2X1LG6 .
G2X2BL6 .
G2X2LG6 .
G2X3BL6 .
G2X3LG6 .
G2X4BL6 .
G2X4LG6 .
G2X5LG6 .
G3X1LG6 .
G3X2BL6 .
G3X2LG6 .
G3X3BL6 .
G3X3LG6 .
G3X4BL6 .
G3X4LG6 .
G3X5LG6 .
G4X1.5LG6
G4X2BL6 .
G4X2LG6 .
G4X3BL6 .
G4X3LG6 .
G4X4BL6 .
G4X4LG6 .
G4X5BL6 .
G4X5LG6 .
G6X4LG6 .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . .D10
. . . . . . . . .B4
. . . . . . . . .B4
Page
Number
Part Number
H
H1.5X2BL6 . . . . . . . . . . . . . . . . . . . . . . . .D6
H1.5X2LG6 . . . . . . . . . . . . . . . . . . . . . . .B12
H1.5X3BL6 . . . . . . . . . . . . . . . . . . . . . . . .D6
H1.5X3LG6 . . . . . . . . . . . . . . . . . . . . . . .B12
H2X2BL6 . . . . . . . . . . . . . . . . . . . . . . . . .D6
H2X2LG6 . . . . . . . . . . . . . . . . . . . . . . . .B12
H2X3BL6 . . . . . . . . . . . . . . . . . . . . . . . . .D6
H2X3LG6 . . . . . . . . . . . . . . . . . . . . . . . .B12
H2X4BL6 . . . . . . . . . . . . . . . . . . . . . . . . .D6
H2X4LG6 . . . . . . . . . . . . . . . . . . . . . . . .B12
H3X3BL6 . . . . . . . . . . . . . . . . . . . . . . . . .D6
H3X3LG6 . . . . . . . . . . . . . . . . . . . . . . . .B12
H3X4BL6 . . . . . . . . . . . . . . . . . . . . . . . . .D6
H3X4LG6 . . . . . . . . . . . . . . . . . . . . . . . .B12
H4X4BL6 . . . . . . . . . . . . . . . . . . . . . . . . .D6
H4X4LG6 . . . . . . . . . . . . . . . . . . . . . . . .B12
HC1.5BL6 . . . . . . . . . . . . . . . . . . . . . . . . .D6
HC1.5LG6 . . . . . . . . . . . . . . . . . . . . . . . .B12
HC2BL6 . . . . . . . . . . . . . . . . . . . . . . . . . .D6
HC2LG6 . . . . . . . . . . . . . . . . . . . . . . . . .B12
HC3BL6 . . . . . . . . . . . . . . . . . . . . . . . . . .D6
HC3LG6 . . . . . . . . . . . . . . . . . . . . . . . . .B12
HC4BL6 . . . . . . . . . . . . . . . . . . . . . . . . . .D6
HC4LG6 . . . . . . . . . . . . . . . . . . . . . . . . .B12
HLS-15R0 . . . . . . . . . . . . . . . . . . . . . . . .D12
HLS-75R0 . . . . . . . . . . . . . . . . . . . . . . . .D12
HLT3I-X0 . . . . . . . . . . . . . . . . . . . . . . . . .D12
Control
Panel
Special
Environment
Data &
Voice
Tools &
Accessories
L
LPMS-S8-C . . . . . . . . . . . . . . . . . . . . . .E12
MC100X100IG2
MC100X50IG2 .
MC100X62IG2 .
MC100X75IG2 .
MC25X25IG2 . .
MC25X37IG2 . .
MC25X50IG2 . .
MC25X62IG2 . .
MC25X75IG2 . .
MC37X37IG2 . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
M
...
...
...
...
...
...
...
...
...
...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.B10
.B10
.B10
.B10
.B10
.B10
.B10
.B10
.B10
.B10
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Technical
Info
Index
G3
Overview
Wiring Duct Index
Page
Number
Part Number
Control
Panel
Special
Environment
Voice &
Data
Tools &
Accessories
Technical
Info
Index
G4
MC37X50IG2 .
MC37X62IG2 .
MC37X75IG2 .
MC50X100IG2
MC50X50IG2 .
MC50X75IG2 .
MC62X37IG2 .
MC62X62IG2 .
MC75X100IG2
MC75X50IG2 .
MC75X62IG2 .
MC75X75IG2 .
.
.
.
.
.
.
.
.
.
.
.
.
NC.5WH6 . . . . .
NC1.5WH6 . . . .
NC1WH6 . . . . .
NC2.5WH6 . . . .
NC2WH6 . . . . .
NC3WH6 . . . . .
NC4WH6 . . . . .
NE.5X.5WH6 . .
NE.5X1WH6 . . .
NE1.5X1.5WH6
NE1.5X2WH6 . .
NE1.5X3WH6 . .
NE1.5X4WH6 . .
NE1X1.5WH6 . .
NE1X1WH6 . . .
NE1X2WH6 . . .
NE1X3WH6 . . .
NE1X4WH6 . . .
NE2.5X3WH6 . .
NE2X1WH6 . . .
NE2X2WH6 . . .
NE2X3WH6 . . .
NE2X4WH6 . . .
NE3X1WH6 . . .
NE3X2WH6 . . .
NE3X3WH6 . . .
NE3X4WH6 . . .
NE3X5WH6 . . .
NE4X2WH6 . . .
NE4X3WH6 . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.B10
.B10
.B10
.B10
.B10
.B10
.B10
.B10
.B10
.B10
.B10
.B10
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
N
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
.C6
Page
Number
Part Number
NE4X4WH6 . . . .
NE4X5WH6 . . . .
NNC25X25LG2 . .
NNC25X37LG2 . .
NNC25X50LG2 . .
NNC25X75LG2 . .
NNC37X37LG2 . .
NNC37X50LG2 . .
NNC37X75LG2 . .
NNC50X50LG2 . .
NNC50X75LG2 . .
NNC50X100LG2 .
NNC75X75LG2 . .
NNC100X50LG2 .
NNC100X75LG2 .
NNC100X100LG2
NR1-C . . . . . . . .
NR1-M . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . .C6
. . . . . . . . .C6
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . . .C4
. . . . . . . .E14
. . . . . . . .E14
PFX-0 . . .
PFX-2 . . .
PLT1M-C
PLT2I-C .
PLT2S-C .
PLT3I-C .
PLT3S-C .
PLT4S-C .
PWT50 . .
PWT75 . .
PX-0 . . . .
PX-2 . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
P
..
..
..
..
..
..
..
..
..
..
..
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . .E7
. . . . . . . . .E7
. . . . . . . .E10
. . . . . . . .E10
. . . . . . . .E10
. . . . . . . .E10
. . . . . . . .E10
. . . . . . . .E10
. . . . . . . . .E4
. . . . . . . . .E4
. . . . . . . . .E7
. . . . . . . . .E7
.
.
.
.
.
.
.
.
.
.
S
...
...
...
...
...
...
...
...
...
...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
S1.5F-C .
S1F-C . . .
S2F-C . . .
S3F-C . . .
S4F-C . . .
SD2H6 . .
SD3H6 . .
SD4H6 . .
SNS.5-C .
SNS.75-C
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.E9
.E9
.E9
.E9
.E9
.E5
.E5
.E5
.E9
.E9
®
PANDUCT ® Wiring Duct
Overview
Page
Number
Part Number
SNS1-C .
SNS1.5-C
SNS2-C .
SNS3-C .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.E9
.E9
.E9
.E9
TA1S8-C . . . . . .
TC100BR2 . . . .
TC25BR2 . . . . .
TC37BR2 . . . . .
TC50BR2 . . . . .
TC75BR2 . . . . .
TM2S8-C . . . . .
TM3S8-C . . . . .
TMC100X50BR2
TMC100X75BR2
TMC25X37BR2 .
TMC37X37BR2 .
TMC50DW2 . . .
TMC50X50BR2 .
TMC75DW2 . . .
TMC75X50BR2 .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
T
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . .E12
. . . . . . . . .C8
. . . . . . . . .C8
. . . . . . . . .C8
. . . . . . . . .C8
. . . . . . . . .C8
. . . . . . . .E11
. . . . . . . .E11
. . . . . . . . .C8
. . . . . . . . .C8
. . . . . . . . .C8
. . . . . . . . .C8
. . . . . .C8,E5
. . . . . . . . .C8
. . . . . .C8,E5
. . . . . . . . .C8
Page
Number
Part Number
TMC75X75BR2
TNR . . . . . . . .
TRC2BL . . . . .
TRC2HDBL . . .
TRC4BL . . . . .
TTS-20R0 . . . .
TTS-35RX0 . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.D12
.D12
.D12
.D12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
UCT3S-X0 . .
UCT5S-X0 . .
UGCTC5S-X0
UGCTE3S-X0
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
U
...
...
...
...
WR2-C . . . .
WR3-C . . . .
WR4-C . . . .
WR5-C . . . .
WRS-A-C10
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
W
...
...
...
...
...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . .C8
. . . . . . . .E14
. . . . . . . .D11
. . . . . . . .D11
. . . . . . . .D11
. . . . . . . .D13
. . . . . . . .D13
Control
Panel
Special
Environment
.E6
.E6
.E6
.E6
.E6
Data &
Voice
Tools &
Accessories
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
G5
PANDUIT ® is a global leader in wiring and communication products,
delivering end-to-end solutions in support of
demanding electrical and networking requirements.
PANDUIT ® Catalogs
Cable Ties
Power Connectors
SA-CTCB03
SA101N15C-NL
!PAN-TY ® Cable Ties
!CONTOUR-TY ™ Cable Ties
!Copper Compression Lugs
!Copper Mechanical Connectors
!PAN-TY Clamp Ties
!DURA-TY ™ Cable Ties
!Copper Compression Splices
!Split Bolt Connectors
!PAN-TY ® Push Mount Ties
!BELT-TY ™ In-Line Cable Ties
!High Voltage Lugs and Splices
!Aluminum Mechanical Connectors
!PAN-TY ® Marker Ties
!TAK-TY
!Compression Taps
®
!DOME-TOP Barb Ty Cable Ties
®
!DOME-TOP ® Barb Ty Clamp Ties
!DOME-TOP Barb Ty Marker Ties
®
Hook & Loop Cable Ties
!STA-STRAP ® Cable Ties
!Cable Tie Installation Tools
!Custom Hot Stamping
®
- Dual Rated Connectors
!Aluminum Compression Lugs
!Grounding Connectors
!Aluminum Compression Splices
!Crimping Tools and Dies
!Compression Connector
Accessories
Wiring Accessories/Abrasion Protection
Stainless Steel Products
SA-CTCB03
SA-SSCB06
!Adhesive Backed Cable Tie
Mounts
!Screw Applied Cable Tie Mounts
!Flat Cable Mounts
!Fixed Diameter Clamps
!Harness Board Accessories
!Spiral Wrap
!PAN-STEEL ® Stainless Steel
!PAN-STEEL® System Accessories
!Braided Expandable Sleeving
Cable Ties
!PAN-STEEL ® Stainless Steel
Strapping
!Installation Tools
!PAN-STEEL® System Permanent
!Corrugated Loom Tubing and
Fittings
!Heat Shrink Tubing
!Non-Shrink PVC Tubing
!PAN-WRAP ™ Split Harness Wrap
Identification
Identification Products
Surface Raceway
SA-101N315C-ID
SA-SRCB02
!Hand-Held Printers
!Lockout/Tagout Products
!Office Furniture Raceway
!Desktop Printers
!Voltage Markers
!Cove Raceway
!Labeling Software
!Warning Labels
!PAN-WAY TG-70 Surface Raceway
!Computer Printable Labels
!Safety Signs and Tags
!PAN-WAY ® T-70 & Twin-70
!Letters and Numbers
Surface Raceway
!PAN-WAY ® T-45 Surface Raceway
!ULTIMATE ID ™ Network Labeling
System
!Wire Markers
!Faceplates, Surface Mount Outlet
Boxes & Labeling Administration
®
!PAN-WAY ® LD Profile Surface
Raceway
!PAN-WAY ® T130 Surface Raceway
!PAN-POLE ™ Outlet Poles
Terminals
Network Connectivity
SA-TM03CB02A
SA-NCCB04
!PAN-TERM ® Terminals
!Terminal Kits
!Modules
!Racks & Cable Management
!Ferrule End Sleeves
!Ferrule End Sleeve Kits
!ULTIMATE ID ™ System
!Grounding and Bonding
!PAN-TERM ® Disconnects
!REEL SMART ™ Terminal Products
!Work Area
!Fiber Routing
!PAN-TERM ® Splices
!Terminal Installation Tools
!Zone Cabling
!Surface Raceway
!Patch Panels, Copper Patch
!Labeling & Administration
Cords & Punchdowns
!Fiber Connectors, Enclosures &
Patch Cords
!Cable Ties & Accessories
!PAN-TERM ® Wire Joints
G6
!Grommet Edging
工商网监
湘ICP备2023018690号
