DMNF6-63M-L

ELECTRICAL SOLUTIONS A. System Overview Piggyback Metric Disconnect, Vinyl Barrel Insulated B1. Cable Ties Type DMV-P • Combination of female disconnect and male tab allows versatility in points of connection • Multiple connection points allow additional circuits to be added to existing equipment without expensive rework • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications • Maximum insulation temperature 194°F (90°C) • Rated up to 600 V Part Number DMV1-63P-LY Wire Range (mm2) 0.5 – 1.0 Color Code Red Max. Ins. (mm) 3.30 DMV2-63P-L 1.5 – 2.5 Blue 4.06 Figure Dimensions (mm) L 22.4 W 7.4 Tab Size (mm) 6.3 x 0.8 22.4 7.4 6.3 x 0.8 Recommended Installation Tool CT-1551 Std. Pkg. Qty. 50 Std. Ctn. Qty. 500 50 500 L For crimping tool information, see page D1.84. B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct W C2. Surface Raceway Male Metric Disconnect, Fully Insulated Nylon – Funnel Entry C3. Abrasion Protection Type DMNF-FIM • Male tab couples with (all 6.3mm x 0.8mm) female disconnects • Fully insulated design provides protection from electrical shorts • Male tab can be inserted and removed from the female disconnect without the use of tools for lower installed cost • Internal barrel serrations assure good wire contact and maximum tensile strength • Maximum insulation temperature 221°F (105°C) • Rated up to 600 V Figure Dimensions (mm) Part Number DMNF1-63FIM-L Wire Range (mm2) 0.5 – 1.0 Color Code Red Max. Ins. (mm) 3.38 L 22.9 W 10.3 H 7.03 Tab Recommended Std. Size Installation Pkg. (mm) Tool Qty. 6.3 x 0.8 50 DMNF2-63FIM-L 1.5 – 2.5 Blue 4.01 22.9 10.4 7.05 6.3 x 0.8 CT-1525, CT-2500 50 Std. Ctn. Qty. 500 500 H L C4. Cable Management D1. Terminals D2. Power Connectors For crimping tool information, see pages D1.84 and D1.88. W D3. Grounding Connectors E1. Labeling Systems Male Metric Disconnect, Nylon Barrel Insulated – Funnel Entry Type DMNF-M • Male tab couples with (all 6.3mm x 0.8mm) female disconnects • Male tab can be inserted and removed from the female disconnect without the use of tools for lower installed cost • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications L • Internal barrel serrations assure good wire contact and maximum tensile strength • Maximum insulation temperature 221°F (105°C) • Rated up to 600 V Color Code Red Max. Ins. (mm) 3.96 Figure DImensions (mm) Part Number DMNF1-63M-C Wire Range (mm2) 0.5 – 1.0 L 22.7 Tab Size (mm) 6.3 x 0.8 DMNF2-63M-C 1.5 – 2.5 Blue 4.83 23.6 6.3 x 0.8 DMNF6-63M-L 4.0 – 6.0 Yellow 6.20 23.6 6.3 x 0.8 Recommended Installation Tool CT-1551 Std. Pkg. Qty. 100 Std. Ctn. Qty. 500 100 500 50 250 For crimping tool information, see page D1.84. E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) D1.59