DNF18-110FIB-3K

ELECTRICAL SOLUTIONS A. System Overview Disco-Lok ™ Female Disconnects, Nylon Fully Insulated – Funnel Entry Type DNG-FL • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Unique locking mechanism design allows for low insertion forces (mating) and positive lock for high vibration applications where a secure connection is mandatory • Fully insulated design provides protection from electrical shorts • Flared barrel extension integrated into stamping to provide insulation grip for double crimp requirements • Insulation housing moves back and forth to engage and disengage locking mechanism for repeated use • Specialty tool required to install this disconnect (CT-1014) • Mates with DNF-FIMB family • UL Flammability UL 94V-2/HB, maximum insulation temperature 221°F (105°C) • Rated up to 300 V B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties H L C1. Wiring Duct W Part Number DNG18-250FL-3K DNG14-250FL-3K Wire Range 22 – 18 AWG 16 – 14 AWG Figure Dimensions (In.) Color Code Red Max. Ins. (In.) 0.126 L 0.97 W 0.36 H 0.24 Blue 0.150 0.97 0.36 0.25 Tab Size In. 0.250 x 0.032 0.250 x 0.032 mm 6.3 x 0.8 CA9 Series Crimp Die CD9-14A CA-800/EZ Series Crimp Die CD-800-14 Pieces Per Reel 3000 6.3 x 0.8 CD9-14A CD-800-14 3000 C2. Surface Raceway C3. Abrasion Protection For applicator information, see page D1.143. C4. Cable Management Female Disconnects, Nylon Fully Insulated – Funnel Entry Type DNF-FIB • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Fully insulated design provides protection from electrical shorts • Disconnects available in common industry tab sizes • Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection • UL Flammability UL 94V-2/HB, maximum insulation temperature 221°F (105°C) • UL and CSA rated up to 600 V per UL 310 D2. Power Connectors D3. Grounding Connectors H L D1. Terminals W Wire Range Part Number DNF18-110FIB-3K DNF18-111FIB-3K DNF18-112FIB-3K* DNF18-187FIB-3K 22 – 18 AWG DNF18-188FIB-3K DNF18-205FIB-3K DNF18-206FIB-3K DNF18-250FIB-3K** DNF14-187FIB-3K DNF14-188FIB-3K 16 – 14 DNF14-205FIB-3K AWG DNF14-206FIB-3K DNF14-250FIB-3K DNF10-250FIB-2K 12 – 10 AWG DNF10250FIBC-2K‡ Color Code Red Red Natural Red Red Red Red Red Blue Yellow Max. Ins. (In.) 0.120 0.120 0.120 0.136 0.136 0.136 0.136 0.136 0.160 0.160 0.160 0.160 0.160 0.220 0.220 Figure Dimensions (In.) L W H 0.71 0.19 0.15 0.71 0.19 0.15 0.71 0.19 0.15 0.78 0.29 0.16 0.78 0.29 0.16 0.78 0.31 0.22 0.78 0.31 0.22 0.84 0.35 0.22 0.78 0.29 0.18 0.78 0.29 0.18 0.78 0.31 0.22 0.78 0.31 0.22 0.84 0.35 0.22 0.96 0.35 0.23 0.96 0.35 0.23 Tab Size In. 0.110 x 0.032 0.110 x 0.020 0.110 x 0.010 0.187 x 0.032 0.187 x 0.020 0.187/0.205 x 0.032 0.187/0.205 x 0.020 0.250 x 0.032 0.187 x 0.032 0.187 x 0.020 0.187/0.205 x 0.032 0.187/0.205 x 0.020 0.250 x 0.032 0.250 x 0.032 0.250 x 0.032 mm 2.8 x 0.8 2.8 x 0.5 2.8 x 0.3 4.8 x 0.8 4.8 x 0.5 4.8/5.2 x 0.8 4.8/5.2 x 0.5 6.3 x 0.8 4.8 x 0.8 4.8 x 0.5 4.8/5.2 x 0.8 4.8/5.2 x 0.5 6.3 x 0.8 6.3 x 0.8 6.4 x 0.8 CA9 Series Crimp Die CD9-7A CD9-7A CD9-7A CD9-4A CD9-4A CD9-4A CD9-4A CD9-4A CD9-5A CD9-5A CD9-5A CD9-5A CD9-5A CD9-13B CD9-13B CA-800/EZ Series Crimp Die CD-800-7 CD-800-7 CD-800-7 CD-800-4 CD-800-4 CD-800-4 CD-800-4 CD-800-4 CD-800-5 CD-800-5 CD-800-5 CD-800-5 CD-800-5 CD-800-13 CD-800-13 Pieces Per Reel 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 2000 2000 *UL/CSA standards do not exist for 0.110" x 0.010" receptacles. **UL with 17 AWG wire. ‡Compressor tab disconnect to fit 0.250" tabs with a post style support. For applicator information, see page D1.143. For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index