DNFR18-205FIB-L

ELECTRICAL SOLUTIONS A. System Overview Female Disconnect, Non-Insulated – Metal Sleeve B1. Cable Ties Type D • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Sleeved barrel helps to facilitate high mechanical and electrical performance when crimping • Barrel of terminal internally beveled to provide quick and easy wire insertion Part Number D18-187-C D18-188-C Wire Range 22 – 18 AWG D18-250-C ▲ D14-187-C ▲ D14-188-C ▲ D14-250-C H L D10-250-L W 16 – 14 AWG 12 – 10 AWG • Internal barrel serrations assure good wire contact and maximum tensile strength • Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection • Maximum recommended operating temperature 302°F (150°C) • UL and CSA rated up to 2000 V per UL 310 Figure Dimensions (In.) L 0.58 W 0.23 H 0.10 Tab Size (In,) 0.187 x 0.032 0.58 0.23 0.10 0.187 x 0.020 0.66 0.30 0.12 0.250 x 0.032 0.58 0.23 0.10 0.187 x 0.032 0.58 0.23 0.10 0.187 x 0.020 0.66 0.30 0.12 0.250 x 0.032 0.72 0.30 0.12 0.250 x 0.032 Recommended Installation Tool CT-100A‡, CT-200‡, CT-1570‡, CT-2500‡ CT-100A, CT-200, CT-600-A, CT-1570, CT-2500 CT-600-A‡, CT1570‡, CT-1701‡, CT-2500‡ Std. Pkg. Qty.** 100 Std. Ctn. Qty. 500 100 500 100 500 100 500 100 500 100 500 50 500 B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management **Bulk packaging may be available, contact Panduit Customer Service for additional information. ‡UL and CSA approved tooling/product combinations. For crimping tool information, see pages D1.83, D1.84, D1.86 and D1.88. UL Recognized only. ▲ D1. Terminals D2. Power Connectors Right Angle Female Disconnect, Nylon Fully Insulated – Funnel Entry D3. Grounding Connectors Type DNFR-FIB • Right angle design for use in limited space applications • Fully insulated design provides protection from electrical shorts • Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection Part Number DNFR18-205FIB-L DNFR18-206FIB-L D H • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • UL Flammability UL 94V-2/HB, maximum insulation temperature 221°F (105°C) • UL and CSA rated up to 600 V per UL 310 Wire Color Range Code 22 –18 AWG Red Figure Dimensions Max. Tab Recommended Std. (In.) Ins. Size Installation Pkg. (In.) (In.) Tool Qty.** L W H D 0.178 0.58 0.37 0.21 0.60 0.205/0.187 50 x 0.032 Std. Ctn. Qty. 250 0.178 0.58 0.37 0.21 0.60 0.205/0.187 x 0.020 50 250 50 250 50 250 50 250 50 250 DNFR18-250FIB-L 0.178 0.58 0.37 0.21 0.60 DNFR14-205FIB-L 0.178 0.58 0.37 0.21 0.60 0.205/0.187 x 0.032 DNFR14-206FIB-L 16 – 14 AWG DNFR14-250FIB-L Blue 0.178 0.58 0.37 0.21 0.60 0.205/0.187 x 0.020 0.178 0.58 0.37 0.21 0.60 CT-300-1 0.250 x 0.032 CT-300-1 0.250 x 0.032 W L **Bulk packaging may be available, contact Panduit Customer Service for additional information. For crimping tool information, see page D1.85. E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)