DNH10-250FI-E

2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. NOTES: L (BEFORE SHRINKING) 1. FOR USE WITH STRANDED COPPER WIRE ONLY (SEE TABLE FOR WIRE RANGE) A .005 (.13) MIN TERMINAL WIRE STOP 2. MATERIAL: A. TERMINAL - CDA 260 BRASS, TIN PLATED B. HOUSING - TYPE 66 NYLON C. INSULATOR - HEAT SHRINKABLE POLYOLEFIN WITH HOT MELT SEALANT 3. MINIMUM SHRINK TEMPERATURE: 250 F (120 C) H 4. ALL DIMENSIONS SHOWN ARE NOMINAL. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS. B 5. PART NUMBER DNH10-250FI IS CONSTRUCTED WITH A BRASS SLEEVE IN WIRE CRIMP AREA. W 6. INSTALLATION TOOL: CT-310 PANDUIT WIRE CRIMP AREA FUNNEL WIRE (NOTE 5) ENTRY MAX. WIRE INSUL. DIA B 7. PKG. QTY. : STD. PKG. -Q=25 -E=20 BULK PKG. -D=500 -T=200 HOUSING 8. Maximum continous operating temperature 230 F (110 C) HEAT SHRINKABLE INSULATOR 9. Minimum continous operating temperature -65 F (-55 C) PART NUMBER TAB SIZE DIMENSIONS WIRE MAX. HOUSING RANGE INSUL. COLOR AWG DIA A W H L STRIP LENGTH DNH18-250FIB -Q -D .250 X .032 (6.3 X 0.8) 22-18 RED .132 (3.35) .84 (21.3) .35 (8.9) .22 (5.5) 1.44 (36.6) 9/32 (7.1) DNH14-250FIB -Q -D .250 X .032 (6.3 X 0.8) 16-14 BLUE .156 (3.96) .84 (21.3) .35 (8.9) .22 (5.5) 1.44 (36.6) 9/32 (7.1) DNH10-250FI -E -T .250 X .032 (6.3 X 0.8) 12-10 YELLOW .230 (5.84) .96 (24.4) .35 (8.9) .27 (6.9) 1.44 (36.6) 3/8 (9.5) TITLE HEAT SHRINK FULLY INSULATED A A FEMALE DISCONNECTS CUSTOMER DRAWING ITEM REVISION NAME N41458BA/07 DATASET FILE NAME N41458BA_DC/07A MATERIAL: UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] .X D10100DA/15 .XX .1 [2.54] .01 [.25] .XXX ANGLES SEE NOTES .005 [.127] 5 DRAWING NUMBER: 07 04-25-13 JBN RTFI RTFI UPDATED DRAWING BORDER & TITLE BLOCK THIRD ANGLE PROJECTION A41458 DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN DRL DATE CHK - A41458 SIZE SCALE - NONE 1 SHT 1 OF 1 A