DPF18-250FIMB-D

ELECTRICAL SOLUTIONS A. System Overview Heat Shrink Disconnects, Fully Insulated – Funnel Entry B1. Cable Ties Type DNH • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Fully insulated design provides protection from electrical shorts • Heat shrink sleeving forms a protective barrier to provide environmentally sealed terminations ideal for high moisture applications Part Number DNH18-250FIM-Q H L DNH18-250FIB-Q DNH14-250FIM-Q W DNH14-250FIB-Q DNH10-250FI-E • Heat shrink sleeving provides additional level of strain relief for the wire • Minimum continuous operating temperature -65°F (-55°C) • Maximum continuous operation temperature 230°F (110°C) • Shrink temperature 300°F (150°C) • Rated up to 600 V Wire Range Color Code 22 – 18 AWG Red Max. Figure Dimensions (In.) Ins. (In.) L W H 0.133 1.50 0.41 0.31 Type Male 0.132 1.44 0.35 0.22 Female 0.158 1.50 0.41 0.31 Male 0.156 1.44 0.35 0.22 Female 12 – 10 Yellow 0.230 AWG 1.44 0.35 0.27 Female 16 – 14 AWG Blue Tab Size (In.) B3. Stainless Steel Ties Recommended Std. Std. Installation Pkg. Ctn. Tool Qty. Qty. 25 125 25 0.250 x 0.032 B2. Cable Accessories CT-310 125 25 125 25 125 20 100 For crimping tool information, see page D1.85. C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Female Disconnect, Nylon Barrel Insulated – Funnel Entry D1. Terminals Type DNF • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications • Internal barrel serrations assure good wire contact and maximum tensile strength Part Number DNF18-110-C • Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection • UL Flammability UL 94V-2/HB, maximum insulation temperature 194°F (90°C) • UL and CSA rated up to 300 V per UL 310 Max. Figure Dimensions (In.) Wire Color Ins Range Code (In.) L W H 0.100 0.69 0.15 0.08 DNF18-111-C CT-1525‡, CT-2500‡ 0.69 0.15 0.07 0.110 x 0.020 0.137 0.76 0.23 0.10 0.187 x 0.032 100 500 0.137 0.76 0.23 0.10 0.187 x 0.020 100 500 0.137 0.76 0.25 0.12 100 500 DNF18-206-C 0.137 0.76 0.25 0.12 100 500 DNF18-250-C 0.138 0.81 0.29 0.12 0.205/0.187 x 0.032 0.205/0.187 x 0.020 0.250 x 0.032 100 500 DNF14-110-C* 0.162 0.75 0.15 0.08 0.110 x 0.032 100 500 DNF14-111-C* 0.162 0.75 0.15 0.07 0.110 x 0.020 100 500 DNF14-187-C 0.162 0.76 0.23 0.10 0.187 x 0.032 100 500 DNF14-188-C 0.162 0.76 0.23 0.10 0.187 x 0.020 100 500 0.162 0.76 0.25 0.12 100 500 DNF14-206-C 0.162 0.76 0.25 0.12 100 500 DNF14-250-C 0.162 0.83 0.29 0.12 0.205/0.187 x 0.032 0.205/0.187 x 0.020 0.250 x 0.032 100 500 DNF18-188-C DNF18-205-C 22 – 18 AWG Red H W Recommended Std. Std. Installation Pkg. Ctn. Tool Qty.** Qty. 100 500 CT-600-A‡, 0.100 DNF18-187-C L Tab Size (In.) 0.110 x 0.032 DNF14-205-C 16 – 14 AWG Blue CT-600-A‡, CT-1550, CT-1551, CT-2500 CT-1525, CT-2500 CT-600-A‡, CT-1550, CT-1551, CT-2500 100 500 *Not UL Listed or CSA Certified. **Bulk packaging may be available, contact Panduit Customer Service for additional information. ‡UL and CSA approved tooling/product combinations. For crimping tool information, see pages D1.84, D1.86, and D1.88. For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index