EMA-X

ELECTRICAL SOLUTIONS A. System Overview Epoxy Applied Mounts • Provide a fast, strong, economical method to secure wire/cable to most surfaces • Eliminate the need to drill holes B1. Cable Ties .98 (24.9) B2. Cable Accessories .98 (24.9) .26 (6.6) Part Number EMS-A-C EMS-A-C0 Used with Cable Ties‡ M, I, S B3. Stainless Steel Ties Material Nylon 6.6 Color Natural Environment Indoors Weather Resistant Nylon 6.6 Black Outdoors Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. EMA epoxy 100 1000 C2. Surface Raceway ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, and S = Standard. Epoxy Applied Swivel Mount • Swivels 360° to assure proper orientation with harness • Four inspection holes to check adhesive coverage C3. Abrasion Protection • For indoor use only C4. Cable Management 1.13 (28.6) 1.13 (28.6) .50 (12.7) D1. Terminals .75 (19.0) .35 (8.9) Used with Cable Ties‡ M, I, S, SGM, SGI Part Number ASMS-A-X Std. Pkg. Qty. 10 Mounting Method EMA Epoxy Std. Ctn. Qty. 100 ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard, SGM = Super-Grip ® Miniature, and SGI = Super-Grip ® Intermediate. • EMA Epoxy supplied in convenient two-compartment mixer cup with a mixer stick for each cup • Each cup contains adhesive for three EMS or ASMS mounts • Epoxy hardens in approximately five minutes Used with Cable Ties‡ • After full 24 hour cure time, bonding strength will exceed 50 lbs. on a clean, grease-free surface • Not recommended for use on polyethylene and polypropylene surfaces Environment Epoxy Mixer EMS Cable Cups Sticks Mounts Ties Std. Pkg. Qty. Std. Ctn. Qty. Epoxy Adhesive Only EMA-X — Indoors/Outdoors 10 10 — — 10 — 1 1 3 — 10 — Epoxy Mounting Kit with EMS Mounts EMSK3-1-X0 M, I, S Indoors/Outdoors Epoxy Mounting Kit with EMS Mounts and Cable Ties EMSK3-1-3-0 EMSK12-4-12-X0 D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems Epoxy Applied Cable Tie Mount Kits Part Number C1. Wiring Duct M, I, S Indoors/Outdoors 1 1 3 3 1 10 Indoors/Outdoors 4 4 12 12 10 10 ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, and S = Standard. For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index B2.9