ERT3M-C20

ELECTRICAL SOLUTIONS A. System Overview HLW Marker Hook and Loop Wrap Ties • Safe choice for network cable bundling • Re-usable multiple times; use where frequent moves, adds, and changes are anticipated Part Number HLWM1.5S-X0 HLWM3S-X0 • Black tie contains a white rectangular "write-on" area where users can write a message using Panduit permanent marking pens on page B2.28 • Minimum 2" overlap required to achieve loop tensile rating Max. Bundle Diameter Length In. In. (mm) (mm) 1.5 6.0 (38) (152) 3.2 (81) 12.0 (305) Width In. (mm) 0.790 (20.1) Thickness In. (mm) 0.17 (4.3) Marker Write-on Area In. (mm) 2.5 x 0.50 63.5 x 12.7 0.790 (20.1) 0.17 (4.3) 2.5 x 0.50 63.5 x 12.7 B1. Cable Ties B2. Cable Accessories Min. Loop Tensile Strength Lbs. (N) 50 (222) 50 (222) Std. Pkg. Qty. 10 Std. Ctn. Qty. 100 10 100 B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Elastomeric Cable Ties – ERT • Elastic material provides a flexible tie body that safely contours around cable bundle to prevent over-tensioning of data cables to maintain network integrity • UL 94V-0 material provides greater flame resistance and meets stringent telecommunication flammability requirements (i.e. NEBS GR-63-CORE) • Greater resistance to damage caused by ultraviolet light – indoor or outdoor use • Soft material has no sharp edges to protect the installer and cable bundle for improved jobsite safety and reliability Part Number ERT2M-C20 • The high coefficient of friction material provides a tight grip and prevents lateral movement along cable bundle, minimizing overall installation time and potential re-work • Releasable design allows release and re-use to accommodate frequent moves, adds, and changes to support evolving equipment and cabling needs • Halogen-free, non-toxic and environmentally safe material will not release toxic or corrosive gases upon combustion • Locking head design; the tapered tip tail threads into locking head to speed productivity; industry-accepted, intuitive tie design Min. Loop Head Head Std. Std. Tensile Length Width Thickness Height Width Strength Pkg. Ctn. Color In. (mm) In. (mm) In. (mm) In. (mm) In. (mm) Lbs. (N) Qty. Qty. Black 8.5 100 1000 (216) ERT3M-C20 Black ERT4.5M-C20 Black 11.0 (279) 16.0 (406) 0.500 (12.70) 0.090 (2.29) .323 (8.20) .841 (21.36) 18 (80) 100 1000 100 1000 D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)