F6F10-10M3Y

LC OptiCam ® Pre-Polished Fiber Optic Connectors SPECIFICATION SHEET specifications LC small form factor (SFF) pre-polished connectors with rear pivot latch shall be TIA/EIA-604 FOCIS-10 compatible and contain a factory-terminated fiber, eliminating field polishing and adhesive. LC pre-polished connectors shall have an average insertion loss of 0.3dB per mated pair for multimode and singlemode fiber. LC pre-polished connectors shall captivate fiber and buffer in one action allowing for up to two re-terminations with no degradation in performance. technical information Standards requirements: TIA/EIA-604 FOCIS-10 compatible; exceeds TIA/EIA-568-B.3 requirements Fiber compatibility: 62.5/125µm OM1, 50/125µm OM2, 10Gig ™ 50/125µm laser optimized OM3/OM4 and 9/125µm OS1/OS2 Fiber cable type: 900µm tight-buffered cable only Fiber cable size: 1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots Ferrule type: Zirconia ceramic with a pre-polished fiber stub Insertion loss: Ceramic: 0.3dB average (multimode and singlemode) Return loss: Ceramic: >20dB (multimode), >26dB (10Gig multimode), >50dB (singlemode) ™ LC OptiCam Connectors ® Factory pre-polished fiber stub endface Eliminates inconsistent and time-consuming field polishing to deliver required optical performance; reduces termination time (less than half the time of field polish connectors) and the number of installation tools required Dual cam design with fiber and buffer clamps Secures both the fiber and the buffer during the camming step to facilitate consistent termination results; reduces the termination time compared to conventional termination methods Allows up to two re-terminations to achieve optimum termination results; reduces the number of rejected connectors and terminations to provide yield rates approaching 100% for lower installed costs Translucent housing assembly Facilitates inspection of the fiber termination quality; results in rapid installations, improved termination yields, and lower installed costs Non-optical disconnect Maintains data transmission under tensile loads for jacketed cable Mechanical cable retention Consistently provides higher than industry standard cable retention; requires no adhesive, speeding installation Provide the highest durability for repeated matings OptiCam ® Termination Tool Universal termination tool Secures both fiber and buffer in one action for all OptiCam ® Connectors with connector specific cradles (included); ensures fast, consistent, and optimal terminations Integrated visual Offers visual indication of proper termination after the cam step termination indicator (VTI) has been completed; virtually eliminates operator error to deliver a lower installed cost applications LC fiber optic connectors are widely used in fiber optic backbone and horizontal applications for high-speed data transmission. Typical applications for LC OptiCam ® Connectors include maintenance or emergency restoration of fiber networks and retrofit/initial install in both behind-the-wall (BTW) and in the permanent side of panelized interconnect and cross-connect. w w w. p a n d u i t . c o m OptiCam ® 1.6/2.0mm Boots 10Gig™ multimode (aqua): FMCBT2AQ-X* Multimode (black): FMCBT2BL-X Singlemode (blue): FSCBT2BU-X OptiCam ® 3.0mm Boots 10Gig™multimode (aqua): FMCBT3AQ-X* Multimode (black): FMCBT3BL-X Singlemode (blue): FSCBT3BU-X *X = Bag of 10 Boots; 100 per carton. key features and benefits Zirconia ceramic ferrules LC OptiCam ® Pre-Polished Connectors with Zirconia Ceramic Ferrules 10Gig ™ 50/125µm (laser optimized) simplex: FLCSMCXAQY▲ ™ 10Gig 50/125µm (laser optimized) duplex: FLCDMCXAQY 50/125µm simplex: FLCSMC5BLY▲ 50/125µm duplex: FLCDMC5BLY 62.5/125µm simplex: FLCSMC6BLY▲ 62.5/125µm duplex: FLCDMC6BLY 9/125µm simplex: FLCSSCBUY▲ 9/125µm duplex: FLCDSCBUY LC OptiCam Connectors eliminate the need for end face polishing and adhesive providing easier, faster installation, especially in remote areas and confined spaces. The hand-held OptiCam ® Termination Tool gives installers the flexibility to terminate in very close proximity to the application without having to switch tools or find benchtop space. ® OptiCam ® Termination Tooling OptiCam ® Termination Kit: FCAMKIT OptiCam ® Conversion Kit (upgrades Opti-Crimp ® Kit to also terminate OptiCam ® Connectors): FPPKIT-CVY Field Polish Kit Upgrade (upgrades Field Polish Kit to also terminate OptiCam ® Connectors): FIELDKITUPG LC cradles (2 per pkg.): FLCC LC Fiber Optic Adapters 10Gig™ multimode: FADJLCAQ-L* Multimode: FADJLCEI-L Singlemode: FADJLCZBU-L *L = Bag of 50 adapters; 100 per carton. Mini-Com ® LC Adapter Modules 10Gig™ multimode: CMDJAQLC** Multimode: CMDJEILC** Singlemode: CMDJLCZBU **Substitute for module color: EI = Electric Ivory, BU = Blue, BL = Black, IW = Off White, AW = Arctic White Opticom ® LC Fiber Adapter Panels 6 duplex MM adapters: FAP6WEIDLC 6 duplex SM adapters: FAP6WBUDLCZ 12 duplex MM adapters: FAP12WEIDLC 12 simplex SM adapters: FAP12WBULCZ Opti-Core ® LC Patch Cords Duplex LC to LC: F^E10-10M‡Y Simplex LC to LC: F^F10-10M‡Y Duplex SC to LC: F^E3-10M‡Y Simplex SC to LC: F^F3-10M‡Y LC Lock-in Duplex Clip LC lock-in duplex clip: FLCCLIW-X ▲ Add -C to simplex connector part numbers for bulk packs of 100 connectors. ^Substitute for fiber type: 6 = 62.5/125µm OM1, 5 = 50/125µm OM2, X = 10Gig™ 50/125µm OM3/OM4 or 9 = 9/125µm OS1/OS2. ‡Substitute for length in meters: 1, 2, 3, 5 or 10. Contact Customer Service for other available lengths. LC OptiCam ® Pre-Polished Fiber Optic Connectors performance information Description Test Parameter Result Qualification test suite (TIA/EIA-568-B.3 requirements) Complete testing protocol per TIA/EIA-568-B.3 using TIA/EIA FOTPs that include mechanical, environmental, and optical test sequences Exceeds TIA/EIA-568-B.3 requirements Connector intermatability Dimensional and material compliance to TIA/EIA standards All connectors are FOCIS compatible with TIA/EIA-604-10 Repeated mating 500 mate/unmate cycles Max. insertion loss: 0.75dB Min. return loss: 20dB Exceeds TIA/EIA-568-B.3 test requirements: