F85-32-C

2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. WIRE STRIP LENGTH WIRE RANGE PANDUIT PART # AWG * F73-5 * F73-7 * F74-5 * F74-7 24 +1/32 -0 [+0,8 -0] 2 [mm ] [0,25] 24-22 [0,34] + F75-6 B + F75-8 9/32 [7,0] 7/32 [5,0] 9/32 [7,0] 22-20 [0,50] F76-6 F76-8 18 F76-10 [0,75] B, K, M [7,0] 0.20 B, K, M [7,0] 0.24 [6,0] 5/16 [8,0] B, K, M [10,0] 0.47 [12,0] 0.24 [6,0] 0.28 [7,0] B, K, M 9/32 [7,0] F78-8 5/16 [8,0] 0.47 [12,0] 0.28 [7,0] 0.31 [8,0] 0.39 13/32 [10,0] 15/32 [12,0] [1,50] F78-15 19/32 [15,0] F78-18 23/32 [18,0] [10,0] B, K, M 25/32 [20,0] F78-20 0.31 [8,0] 0.39 [10,0] 15/32 [12,0] F78-7 [8,0] 0.39 0.47 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 [20,0] [1,1] 0.04 [1,1] 0.05 [1,2] 0.05 [1,2] 0.05 [1,3] 0.05 [1,3] 0.05 [1,3] 0.06 [1,5] 0.06 [1,5] 0.06 [1,5] 0.06 [1,5] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.08 [1,0] 0.31 B, K, M 13/32 [10,0] 16 [15,0] 0.28 0.04 0.03 [0,8] 0.03 [0,8] 0.04 [0,9] 0.04 [0,9] 0.04 1/4 [6,0] 5/16 [8,0] F78-10 0.20 [15,0] 0.28 [1,0] 0.05 [1,2] 0.05 [1,2] 0.05 [1,2] 0.05 [1,2] 0.06 [1,4] 0.06 [1,4] 0.06 [1,4] 0.06 [1,4] 0.06 [1,4] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 0.07 [1,7] 9/32 [7,0] F77-12 (REF.) 0.24 [6,0] F77-7 F77-10 (REF.) [10,0] 1/4 [6,0] [1,00] OD-1 13/32 [10,0] F77-6 - ID-1 0.04 15/32 [12,0] F78-12 L [1,0] F76-12 F77-8 CLASS 0.31 13/32 [10,0] WIRE RANGE INSTALLATION TOOLS/DIES [8,0] 0.39 5/16 [8,0] in. [mm] WIRE 1/4 [6,0] + F75-10 A 7/32 [5,0] DIMENSIONS 0.04 [2,0] 0.08 [2,0] 0.08 [2,0] 0.08 [2,0] 0.08 [2,0] 0.08 [2,0] 0.08 [2,0] PANDUIT PART # OD-2 AWG [mm 0.07 [1,7] 0.07 [1,7] 0.07 [1,8] 0.07 [1,8] 0.08 [2,1] 0.08 [2,1] 0.08 [2,1] 0.09 CT-1002 CT-1123 #CT-2523CH 2 ] 9/32 [7,0] F80-8 5/16 [8,0] F80-10 13/32 [10,0] 14 [2,50] 15/32 [12,0] F80-15 19/32 [15,0] F80-18 23/32 [18,0] F81-12 12 F81-15 CT-1002 CT-1003 CT-1090 0.10 [2,5] ^^CD-090 0.10 [2,5] CT-1123 CT-1160 CT-1170 0.10 [2,5] 0.10 0.11 [2,8] 0.11 [2,8] 0.11 [2,8] 15/32 [12,0] 19/32 [15,0] F81-18 23/32 [18,0] F81-20 25/32 [20,0] F82-10 13/32 [10,0] F82-15 10 [6,00] 19/32 [15,0] F82-18 23/32 [18,0] F82-20 25/32 [20,0] G, I, K, M [2,8] 0.11 [2,8] * NOT UL LISTED, UL486 SCOPE IS 20 - 1/0 AWG ONLY + UL LISTED WITH 20 AWG ONLY ++ TOOL/PART COMBINATION IS NOT UL LISTED ^ TOOL/PART COMBINATION IS NOT UL LISTED WITH CLASS I WIRE ^^ DIES USED WITH CT-2300 TOOL # CRIMP HEAD USED WITH CT-2500 TOOL 0.13 [3,4] 0.10 0.13 [2,5] [3,4] 0.10 0.13 [2,5] [3,4] 0.10 0.13 [2,5] [3,4] 0.10 0.13 [2,5] [3,4] 0.10 0.13 [2,5] [3,4] 0.13 0.16 [2,8] [3,2] [4,0] 0.11 0.13 0.16 [10,0] [2,8] [3,2] [4,0] 0.47 0.11 0.13 0.16 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 [2,8] [3,2] [4,0] 0.11 0.13 0.16 [2,8] [3,2] [4,0] 0.11 0.13 0.16 [20,0] 0.39 [2,8] [3,2] [4,0] 0.14 0.15 0.19 [10,0] [3,5] [3,9] [4,7] 0.47 0.14 0.15 0.19 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 [3,5] [3,9] [4,7] 0.14 0.15 0.19 [3,5] [3,9] [4,7] 0.14 0.15 0.19 [3,5] [3,9] [4,7] 0.14 0.15 0.19 [20,0] [3,5] [3,9] [4,7] 0.47 0.18 0.19 [4,9] 0.23 [5,8] 0.11 0.13 0.16 [2,8] [3,2] [4,0] [4,5] F83-15 19/32 [15,0] 0.59 [15,0] 0.18 0.19 [4,5] [4,9] 0.71 [18,0] 0.18 0.19 [4,5] [4,9] 0.18 0.19 [4,5] [4,9] 8 [10,0] 23/32 [18,0] G, H, I, K, M F83-20 [2,8] 0.11 0.47 [12,0] 0.59 [15,0] 0.71 [18,0] 0.79 0.10 [2,5] [12,0] [2,8] 0.11 0.13 [3,4] 15/32 [12,0] F83-18 0.11 0.10 [2,5] F83-12 0.11 F83-25 OD-2 0.09 [20,0] 0.35 [9,0] 0.39 G, K, M (REF.) [2,2] 0.09 [2,2] 0.09 [2,2] 0.09 [2,2] 0.09 [2,2] 0.09 [2,2] 0.09 [2,2] [10,0] K, M OD-1 0.28 0.31 G, ID-1 (REF.) [7,0] [8,0] 0.39 15/32 [12,0] F82-12 #CT-2523CH [2,5] [4,00] INSTALLATION TOOLS/DIES L 13/32 [10,0] F81-10 in. [mm] CLASS 11/32 [8,0] F81-9 0.10 DIMENSIONS WIRE 25/32 [20,0] F80-20 [2,5] +1/32 -0 [+0,8 -0] F80-7 F80-12 [2,3] 0.09 [2,3] 0.09 [2,3] 0.09 [2,3] WIRE STRIP LENGTH 25/32 [20,0] 0.79 [20,0] 31/32 [25,0] 0.98 [25,0] 0.18 0.19 [4,5] [4,9] CT-1002 CT-1003 CT-1090 B ^^CD-090 CT-1123 CT-1160 CT-1170 #CT-2523CH CT-1002 ++CT-1003 CT-1090 ^^CD-090 CT-1123 CT-1160 CT-1170 #CT-2523CH ++CT-1003 ++CT-1004 ^CT-1090 ^^CD-090 0.23 [5,8] 0.23 [5,8] CT-1104 CT-1123 CT-1160 CT-1170 0.23 [5,8] #CT-2504CH #CT-2523CH 0.23 [5,8] LISTED E472545 A CERTIFIED LR31212 TITLE L FERRULES - BARE, NO SLEEVE SHEET 1 OF 2 0D-1 REF. CUSTOMER DRAWING ITEM REVISION NAME OD-2 N41670BA/22 NOTES: 1. USED FOR: DATASET FILE NAME ID-1 REF. N41670BA_DC/22 MATERIAL: UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] A. UL LISTED WITH STRANDED COPPER WIRE 20 - 1/0 AWG ONLY B. 302 F [150 C] MAX. OPERATING TEMPERATURE 2. MATERIAL: A. STAMPING: COPPER, TIN PLATED 3. SEE www.panduit.com FOR PACKAGE QUANTITIES 4. DIMENSIONS IN BRACKETS ARE METRIC EQUIVALENT 5. FOR TOLERANCING REFER TO DIN 46228 PART 1 22 3.16.18 JHNU BJPU 21 8.28.17 JHNU TMR JADE REVISED WIRE RANGE FOR F94-40: 400 RGB [203] WAS 500 [240] ADDED CD-920 DIES TO F87, F88, F90, F91, F92, F93, F94 FERRULES A41670 .X .XXX .XX ANGLES DRAWING NUMBER: THIRD ANGLE PROJECTION A41670 DRAWN BY REV 2 DATE BY CHK APR DESCRIPTION SEE NOTES ECN JKD 1 DATE CHK 2/10/99 SKB A41670 SIZE SCALE N.T.S. SHT 1 OF 2 B 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. WIRE RANGE PANDUIT PART # AWG [mm 2 ] +1/32 -0 [+0,8 -0] DIMENSIONS in. [mm] WIRE INSTALLATION PANDUIT CLASS TOOLS PART # L 0.47 ID-1 OD-1 (REF.) (REF.) OD-2 AWG 2 [mm ] +1/32 -0 [+0,8 -0] DIMENSIONS in. [mm] INSTALLATION TOOLS/DIES WIRE CLASS L ID-1 OD-1 (REF.) (REF.) [12,0] 0.23 [5,8] 0.24 [6,2] 0.30 [7,5] F87-18 23/32 [18,0] 0.71 [18,0] 0.41 [10,3] [10,9] F84-15 19/32 [15,0] 0.59 [15,0] 0.23 [5,8] 0.24 [6,2] 0.30 [7,5] F87-22 7/8 [22,0] 0.87 [22,0] 0.41 [10,3] [10,9] 0.71 [18,0] 0.23 [5,8] 0.24 [6,2] 0.30 [7,5] 0.23 [5,8] 0.24 [6,2] 0.30 [7,5] 23/32 [18,0] G, H, I, K, M [16,0] 1-1/0 ++CT-1004 [50] G, H, DLO, I, K, M OD-2 0.43 15/32 [12,0] 6 0.51 [13,0] 0.43 0.51 [13,0] 0.43 F87-25 31/32 [25,0] 0.98 [25,0] 0.41 [10,3] [10,9] F87-32 1 1/4 [32,0] 1.26 [32,0] 0.41 [10,3] [10,9] 0.51 [13,0] * F89-25 31/32 [25,0] 0.98 [25,0] [12,5] 0.52 [13,3] 0.59 [15,0] 1.26 0.49 0.59 [15,0] CT-1104 0.43 F84-20 25/32 [20,0] F84-25 31/32 [25,0] 0.98 [25,0] 0.23 [5,8] 0.24 [6,2] 0.30 [7,5] 1.26 0.23 [5,8] 0.24 [6,2] 0.30 [7,5] * F89-32 1 1/4 [32,0] [32,0] [12,5] 0.52 [13,3] 0.30 [7,7] 0.37 [9,5] * F90-25 31/32 [25,0] 0.98 [25,0] 0.57 [14,5] 0.60 [15,3] 0.67 [17,0] 0.30 [7,7] 0.37 [9,5] * F90-30 1.18 0.57 [14,5] 0.60 [15,3] 0.67 [17,0] 0.30 [7,7] 0.37 [9,5] 0.57 [14,5] 0.60 [15,3] 0.67 [17,0] 0.30 [7,7] 0.37 [9,5] 0.65 [16,5] 0.69 [17,5] 0.75 [19.0] 0.37 [9,5] * F91-40 1 19/32 [40,0] [40.0] 0.65 [16,5] 0.69 [17,5] 0.75 [19.0] 0.43 * F92-32 1 1/4 [32,0] 1.26 0.73 0.77 [11,0] [32,0] [18,5] [19,5] 0.83 [21.0] 1.50 0.73 [18,5] 0.77 [19,5] 0.83 [21.0] 0.79 [20,0] 0.83 [21,2] 0.93 [23,5] 0.79 [20,0] 0.83 [21,2] 0.93 [23,5] 0.90 [22,8] 0.94 [24,0] 1.02 F84-32 1-1/4 [32,0] [32,0] F85-12 15/32 [12,0] 0.47 0.29 [12,0] [7,3] F85-15 19/32 [15,0] 0.59 [15,0] 0.29 [7,3] 23/32 [18,0] G, H, I, K, M 0.71 [18,0] [7,3] 31/32 [25,0] 0.98 [25,0] [7,3] 1.26 0.29 4 [25] F85-25 0.29 0.29 F85-32 1 1/4 [32,0] [32,0] [7,3] 0.30 [7,7] F86-18 23/32 [18,0] 0.71 [18,0] 0.33 [8,3] 0.34 [8,7] 25/32 [20,0] F86-20 2 F86-25 F86-32 [35] G, H, I, K, M 31/32 [25,0] 1 1/4 [32,0] 0.79 [20,0] 0.33 [8,3] 0.34 [8,7] [11,0] 0.98 [25,0] 0.33 [8,3] 0.34 [8,7] [11,0] 1.26 [32,0] 0.33 [8,3] 0.34 [8,7] #CT-2504CH 2/0 CT-1005 [95] H, DLO, I, K, M 1 3/16 [30,0] H, DLO, I, K, M [30,0] 1.26 * F90-32 1 1/4 [32,0] [32,0] * F91-32 1 1/4 [32,0] [32,0] 4/0-250 [120] 300 0.43 0.43 3/0 [70] 1.26 H, DLO, I, K, M 1.57 H, DLO, I, K, M [150] * F92-38 1 1/2 [38,0] [38,0] * F93-32 1 1/4 [32,0] [32,0] CT-1005 350 0.43 * F93-40 [11,0] * NOT UL LISTED, UL486F SCOPE IS 20 - 1/0 AWG ONLY ++ TOOL/PART COMBINATION IS NOT UL LISTED * F94-40 1.26 H, DLO, I, K, M [185] 1.57 1 19/32 [40,0] 400 [203] 1 19/32 [40,0] 0.49 [40.0] 1.57 H, DLO, I, K, M [40.0] CT-1006 CD-2001-F87 @CD-920-F87 ** 0.51 [13,0] 0.79 [20,0] F85-18 ** WIRE STRIP LENGTH WIRE RANGE F84-12 F84-18 B WIRE STRIP LENGTH B ** CD-2001-F89 @CD-920-F89 ** CD-2001-F90 @CD-920-F90 ** CD-2001-F91 @CD-920-F91 ** CD-2001-F92 @CD-920-F92 ** CD-2001-F93 @CD-920-F93 ** CD-2001-F94 @CD-920-F94 [25,8] DIES USED WITH CT-3001 OR CT-3001/E TOOL # CRIMP HEAD USED WITH CT-2500 TOOL A @ DIES USED WTIH CT-3001/ST, CT-3001/CCP SERIES TOOLS AND CT-930LPCH CRIMP HEAD AND CT-902HP 5K PUMP CRIMPS WITH 1 AWG F87-18 FERRULES USING CD-2001-F87 OR CD-920-F87 DIES REQUIRE DOUBLE 180 CRIMP L A 0D-1 REF. TITLE ID-1 REF. FERRULES - BARE, NO SLEEVE SHEET 2 OF 2 OD-2 CUSTOMER DRAWING NOTES: ITEM REVISION NAME 1. USED FOR: DATASET FILE NAME N41670BA/22 N41670BA_DC/22 A. UL LISTED WITH STRANDED COPPER WIRE 20 - 1/0 AWG ONLY B. 302 F [150 C] MAX. OPERATING TEMPERATURE MATERIAL: UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] 2. MATERIAL: A. STAMPING: COPPER, TIN PLATED 3. SEE www.panduit.com FOR PACKAGE QUANTITIES 4. DIMENSIONS IN BRACKETS ARE METRIC EQUIVALENT 5. FOR TOLERANCING REFER TO DIN 46228 PART 1 LISTED E472545 .X .XXX .XX ANGLES CERTIFIED LR31212 DRAWING NUMBER: THIRD ANGLE PROJECTION DRAWN BY JKD 2 SEE NOTES 1 DATE CHK 2/10/99 SKB A41670 SIZE SCALE N.T.S. SHT 2 OF 2 B