F9E10-10M12Y

LC Fiber Optic Connectors ® SPECIFICATION SHEET specifications LC small form factor (SFF) field polish connectors with rear pivot latch are TIA/EIA-604 FOCIS-10 compatible. LC simplex and duplex connectors are field terminable. The fibers shall terminate in 1.25mm ceramic ferrules with non-optical disconnect functionality and an average insertion loss of .1dB per mated pair for multimode and singlemode fiber. technical information Standards requirements: TIA/EIA-604 FOCIS-10 compatible; exceeds TIA/EIA-568-B.3 requirements Fiber compatibility: 62.5/125µm OM1, 50/125µm OM2, 10GIG ™ 50/125µm laser optimized OM3 and 9/125µm OS1 Fiber cable type: 900µm tight-buffered cable recommended Fiber cable size: 1.6mm – 2.0mm jacketed cable Ferrule type: Zirconia ceramic ferrule Insertion loss: .1dB average (multimode and singlemode) Return loss: >20dB (multimode), >40dB (singlemode) key features and benefits Rear pivot latch design, robust construction Longer beam reduces deflection during mating and unmating to reduce latch fatigue, leading to longer cycle life Anti-snag latch Low profile latch resists cable snagging Wide “positive grip” thumb latch Multi-grooved, full body width thumb latch improves grip for better control during matings/unmatings; promotes fast, easy MACs (moves, adds, changes) in high-density applications Audible “click” upon successful mating Provides user with a definitive signal of successful connector mating Field installable duplex clip with integrated polarity markers Allows fast, easy field polarity changes without tools; quick identification of polarity One connector body design for both simplex and duplex applications A single connector design is used for both simplex and duplex patch cords and inside the wall applications to simplify installation Protective cap locks onto connector latch with audible “click” Protective cap automatically locks onto connector latch, completely covering connector end; prevents ferrule end face damage by providing protection from contamination and impact Anaerobic adhesive field installation Simplifies and reduces installation time by 50% compared to heat cured epoxy terminations; curing oven/time not required Rugged body construction Stable performance under side loads for improved reliability Independent free-floating ferrules Ensures physical fiber contact for consistent low return loss, unlike unitary multi-fiber ferrule connectors 1.25mm ceramic ferrules Provide the highest durability for repeated matings applications PANDUIT LC Fiber Optic Connectors provide a rugged solution for high-density telecommunication rooms, LANs, public networks and fiber-to-the-desk applications. LC simplex and duplex connectors are used for equipment cross-connects or interconnects in backbone, horizontal and work *MTP is a registered trademark of US Conec Ltd. w w w. p a n d u i t . c o m area applications for high-speed data transmissions. The high-density design and 1.25mm ferrules double the port density (compared to SC connectors) to reduce space requirements on racks, enclosures, panels and faceplates. LC Simplex Fiber Optic Connectors for 900µm Buffered Fiber and 1.6mm – 2.0mm Jacketed Cable FLCSMEI Multimode: Singlemode: FLCSSBU LC Duplex Fiber Optic Connectors for 1.6mm – 2.0mm Jacketed Cable Multimode: FLCDMEI Singlemode: FLCDSBU LC Duplex Fiber Optic Connectors for 900µm Buffered Fiber Multimode: FLCDM900EI Singlemode: FLCDS900BU LC Sr./Jr. SFF Fiber Optic Adapters Duplex MM: FADJLCEI-L Duplex 10GIG™: FADJLCAQ-L Duplex 10GIG™(zirc.): FADJLCZAQ-L Simplex 10GIG™(zirc.): FASJLCZAQ-L Duplex SM (zirc.): FADJLCZBU-L Simplex SM (zirc.): FASJLCZBU-L L = Bag of 50 adapters; 100 per carton. For Sr./Sr., replace J in part number with S. MINI-COM ® Sr./Jr. LC Adapter Modules Duplex MM: CMDJLC** Duplex 10GIG™: CMDJAQLCBL ™ Duplex 10GIG (zirc.): CMDJAQLCZBL Duplex SM (zirc.): CMDJLCZ** For Sr./Sr., replace J in part number with S. OPTICOM ® LC Fiber Adapter Panels 6 duplex 10GIG™: FAP6WAQDLCZ 6 duplex MM: FAP6WEIDLC 6 duplex SM (zirc.): FAP6WBUDLCZ 12 duplex MM: FAP12WEIDLC 12 simplex SM (zirc.): FAP12WBULCZ OPTICOM ® QUICKNET ™ Pre-Terminated MTP* Cassettes 6 LC to MTP* (12f): FC^-12-10 12 LC to 2 MTP* (24f): FC^-24-10 OPTI-CORE ® Fiber Optic Patch Cords Duplex LC to LC: F^E10-10M‡ Simplex LC to LC: F^F10-10M‡ Simplex LC to pigtail: F^B10-NM‡ LC Termination Tooling 110V termination kit: FLPKIT 230V termination kit: FLPKIT-W Refurbishment kit: FLPKIT-RFB HD Connector Removal Tool For LC and SC: HDCRT **Substitute for module color: EI = Electric Ivory BU = Blue IG = International Gray WH = White TG = Technical Gray BL = Black AW = Arctic White IW = Off White EW = European White ^Substitute for fiber type: X (OM3 – 10GIG ™ 50/125µm), 5 (OM2 – 50/125µm), 6 (OM1 – 62.5/125µm) or 9 (OS1 – 9/125µm). ‡Substitute for length in meters: 1, 2, 3, 5 or 10 for patch cords, and 1, 2 or 3 for pigtails; singlemode patch cords are also available in 12, 15, 25 or 30 meter lengths. Contact Customer Service for other available lengths. LC Fiber Optic Connectors performance information Description Test Parameter Result Qualification test suite (TIA/EIA-568-B.3 requirements) Complete testing protocol per TIA/EIA-568-B.3 using TIA/EIA FOTPs that include mechanical, environmental and optical test sequences Compliant; exceeds TIA/EIA-568-B.3 requirements Connector intermatability Dimensional and material compliance to TIA/EIA standards All connectors are FOCIS compatible with TIA/EIA-604-10 selection information Connector Type Part Number Cable Type FLCSMEI Simplex 900µm buffered fiber and 1.6mm – 2.0mm jacketed cable FLCDMEI Duplex 1.6mm – 2.0mm jacketed cable FLCDM900EI Duplex 900µm buffered fiber FLCSSBU Simplex 900µm buffered fiber and 1.6mm – 2.0mm jacketed cable FLCDSBU Duplex 1.6mm – 2.0mm jacketed cable FLCDS900BU Duplex 900µm buffered fiber Fiber Ferrule Housing Color Boot Color Average Insertion Loss* Return Loss Multimode Zirconia Ceramic Electric Ivory Electric Ivory .1dB >20 Singlemode Zirconia Ceramic Blue Blue .1dB >40 *All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171. LC Simplex Connectors LC Duplex Connectors For 900µm Fiber and 1.6mm – 2.0mm Jacketed Cable For 900µm Fiber or 1.6mm – 2.0mm Jacketed Cable .25 [6.35] 1.60 [40.6] 1.60 [40.6] FLCDM900EI, FLCDS900BU 2.20 [56.0] .25 [6.35] 2.20 [56.0] FLCSMEI, FLCSSBU FLCDMEI, FLCDSBU Dimensions are in inches [Dimensions in brackets are in millimeters]. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6379.6700 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.3767.7011 PANDUIT LATIN AMERICA Jalisco, Mexico cs-la@panduit.com Phone: 52.333.666.2501 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800-777-3300 and reference FBSP13 ©2005 PANDUIT Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. WW-FBSP13 Replaces SA-FBSP07 10/2005