FBC2X2OR

FiberRunner ® 2x2 Routing System S P E C I F I C AT I O N S H E E T specifications The 2x2 routing system shall be a system of channel, fittings, and brackets designed to segregate, route, and protect fiber optic and high performance copper cabling. Channel and fittings shall be assembled using pre-assembled couplers. A selection of spillout options shall be available that easily attach using the vertical tee. Fittings maintain a minimum 2" bend radius to protect against signal loss due to excessive cable bends. Available system colors shall be yellow, orange, and black. A full complement of brackets shall be available for attaching system components to ladder rack, threaded rod, auxiliary framing, strut, equipment racks and raised floor pedestals. technical information Dimensions are in inches (Dimensions in parentheses are metric). 2.00 (50.8) A = 3.4 in.2 (2195mm2) 2.17 (55.1) Open channel Cable 50% fill capacity: 1.6mm (2" pile up) 2.0mm 3.0mm Fiber Optic Ribbon Interconnect 5.20mm Category 6 6.35mm Category 6A 7.57mm No. of Cables 546 349 155 52 35 24 Material: Rigid PVC (Channel), ABS (Fittings) Flammability: 94V-0 Approvals: UL Listed to 2024A Optical Fiber Cable Routing Assemblies Compliant with the applicable tests in Telcordia GR-63-CORE  Network Equipment Building Systems Level 3 CSI spec form: LP-CSISPEC-FR key features and benefits Fastest installations No bolts need to be tightened and no tools are required when installing the QuikLock ™ Coupler; QuikLock ™ Couplers take less than five seconds to make a mechanically secure connection Easy to maintain Hinged channel cover, hinged door vertical tee and solid fitting covers protect cabling and provide fast and easy access for future cabling moves, adds, and changes System strength Robust system of channel, covers, fittings and other non-metallic system components protect cable from physical damage; system includes full range of directional and spillout fittings Versatility The vertical tee accepts a 3-sided trumpet, transition to corrugated tubing and Panduit ® FiberRunner ® and Fiber-Duct ™ Systems Cable protection A minimum 2" bend radius maintained throughout all fittings prevents excessive bends in fiber optic cabling applications The FiberRunner ® 2x2 Routing System is a system of channel, fittings, and brackets designed to segregate, route, and protect fiber optic and high performance copper cabling. It is suited for data center applications where cable is routed from distribution areas to equipment cabinets or racks. It is used in Telco Central Offices to route fiber optic jumper cables between fiber distribution frames and equipment bays. It can be deployed over the racks or in approved underfloor applications. Channel and fittings are assembled using timesaving Panduit ® QuikLock ™ Couplers. A selection of spillout options is available that easily attach using w w w. p a n d u it.c o m Channel and Cover 2x2 solid hinged channel (6'): 2x2 slotted hinged channel (6'): 2x2 hinged cover (6'): Cable retainer: HS2X2**6NM H2X2**6 HC2**6 WR2H-C Fittings and Spillouts QuikLock ™ Coupler: Horizontal right angle: FBC2X2** FRA2X2** Horizontal tee: FT2X2** 4-way cross: FFWC2X2** End cap: FHDEC2X2** Inside vertical 45°: FIV452X2** Outside vertical 45°: FOV452X2** Inside vertical 90°: FIVRA2X2** Outside vertical 90°: FOVRA2X2** 4x4 Fiber-Duct ™ to 2x2 reducer: FRF42** 4x4 FiberRunner ® to 2x2 reducer: FRRF4FD2** Vertical tee: FVTHD2X2** 3-sided BRC trumpet spillout: FTR2X2** 1-port spillout to 1.5" I.D. corrugated tubing: FIDT2X2** 2x2 hinged duct vertical cable manager kit: FRHD2KT** Hinged channel 1" bend radius control trumpet: TRC2HDBL Mounting Brackets Existing 1/2" thr rod brkt: FTRBE12 Existing 5/8" thr rod brkt: FTRBE58 New 1/2" thr rod brkt: FTRBN12 New 5/8" thr rod brkt: FTRBN58 Underfloor brkt: FUSB Ladder rack brkt: FLRB “L” wall mount brkt: FLB Adjustable “Z” bracket: FZBA1.5X4 Low profile “Z” bracket: FZBLP Two-piece ladder rack brkt 1/2" thr rod: F2PCLB12 Two-piece ladder rack brkt 5/8" thr rod: F2PCLB58 Two-piece framing clip 5/8" thr rod to 9/16" C-channel aux. framing bars: FRAFC58 **Substitute: YL = Yellow, OR = Orange, BL = Black the vertical tee. Fittings maintain a 2" bend radius to protect against signal loss due to excessive cable bends. Available system colors are yellow, orange, and black to differentiate various types of cabling. A full complement of brackets is available to attach system components to support structures found in all applications. The FiberRunner ® 2x2 Routing System is part of the Panduit complete fiber distribution system, which includes the FiberRunner ® 24x4, 12x4, 6x4, and 4x4 Routing Systems, the Fiber-Duct ™ 4x4 and 2x2 Routing Systems, cable management, and racks. FiberRunner ® 2x2 Routing System channel and cover HS2X2**6NM H2X2**6 HC2**6 WR2H-C fittings, split covers, and spillouts FBC2X2** FRA2X2** FT2X2** FFWC2X2** FHDEC2X2** FIV452X2** FOV452X2** FIVRA2X2** FOVRA2X2** FRF42** FRRF4FD2** FVTHD2X2** FTR2X2** FIDT2X2** FRHD2KT** TRC2HDBL FTRBN12 FTRBN58 FUSB FLRB FLB FZBA1.5X4 F2PCLB12 F2PCLB58 FRAFC58 QuikLock™ Mounting Brackets FTRBE12 FTRBE58 FZBLP **Substitute: YL = Yellow, OR = Orange, BL = Black WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2014 Panduit Corp. ALL RIGHTS RESERVED. FRSP19--WW-ENG Replaces WW-FRSP06 11/2014