FCF4X4LG

2x2 and 4x4 Fiber-Duct™ Routing System S p e c i f i c a t i o n S H EET specifications The 2x2 and 4x4 routing systems shall be used to route, segregate, and protect fiber optic and communication cabling. The solid wall routing systems should be UL Listed as an optical fiber channel for general purpose use. They shall be compliant with UL 2024A and NEC articles 770 and 800 when installed per instructions. The slotted wall channel and cover shall be UL Recognized. A full complement of fittings with a 2" minimum bend radius, snap-on covers, and mounting brackets shall be available. Channel and fittings shall be manufactured from impact-resistant and flame retardant (V-0) materials. Channel shall have non-slip snap-on covers that can be easily removed to allow access for moves, adds, and changes. Channel and fittings finish shall be pure color, resist scratches, dents, and not peel or corrode. Available system colors shall be yellow, orange, black, and light gray. A full complement of brackets shall be available for attaching system components to ladder rack, threaded rod, auxiliary framing, equipment racks, and raise floor pedestals. technical information 2.25" (57.1mm) 4.25" (107.9mm) 4.10" (104.1mm) 2.25" (57.1mm) A = 4.0 in.2 (2580mm2) Dimensions are in inches (Dimensions in parentheses are metric). Open channel 50% fill capacity (2" pile up): 2x2 Fiber-Duct™ System Fiber Optic Ribbon Interconnect Augmented Open channel 50% fill capacity (4" pile up): 4x4 Fiber-Duct™ System Fiber Optic Ribbon Interconnect Augmented Cable 1.6mm 2.0mm 3.0mm 5.20mm Category 6, 6.1mm Category 6, 7.6mm No. of Cables 562 359 160 53 39 25 1.6mm 2.0mm 3.0mm 5.20mm Category 6, 6.1mm Category 6, 7.6mm 2343 1499 666 221 161 103 Material: Rigid PVC (channel), ABS (fittings) Flammability: 94V-0 Approvals: UL Listed to 2024A Optical Fiber Cable Routing Assemblies UL Recognized (File No. E147128) slotted wall CSA Certified (File No. 016446 0 000) slotted wall CSI spec form: LP-CSISPEC-FD-1 key features and benefits Large capacity 2"x 2" and 4" x 4" sizes Ideal for routing, segregating, and protecting large amounts of fiber cabling; provides a more secure installation for fiber or high performance copper cabling Minimum 2" bend radius control fittings Bend radius control in fittings helps prevent excessive bends in fiber optic and high performance copper cabling Snap-on covers Covers snap on or off channel and fittings to enclose or gain access to system; fully encloses the channel to provide protection per UL 2024A; provides quick and easy access for moves, adds, and changes Mates to Panduit cable management rack panels Provides methods to mate system to equipment mounted on standard EIA 19" or 23" equipment racks and vertical cable managers applications The Fiber-Duct™ 2x2 and 4x4 Routing Systems are comprised of channel, fittings, and brackets designed to segregate, route, and protect fiber optic cable and copper cabling. It is suited for data center applications where cable is routed from distribution areas to equipment cabinets or racks. It is used in Telco Central Offices to route fiber optic jumper cables between fiber distribution frames and equipment bays. It can be deployed over the racks or in approved under floor applications. Fittings maintain a minimum 2" bend radius to w w w. pa n d u it.c o m protect against signal loss due to excessive cable bends. Available system colors are yellow, orange, black, and light gray to differentiate various types of cabling. A full complement of brackets is available to attach system components to support structures found in all applications. The Fiber-Duct™ 2x2 and 4x4 Routing Systems are part of the Panduit complete fiber distribution system, which includes the FiberRunner ® 24x4, 12x4, 6x4, 4x4, and 2x2 Routing Systems, cable management, and racks. Channel and Cover 2x2 solid wall channel (6'): 4x4 solid wall channel (6'): 2x2 slotted wall channel (6'): 4x4 slotted wall channel (6'): 2x2 cover (6'): 4x4 cover (6'): Fittings and Spillouts 2x2 coupler: 4x4 coupler: 2x2 horizontal right angle: 4x4 horizontal right angle: 2x2 horizontal tee: 4x4 horizontal tee: 2x2 4-way cross: 4x4 4-way cross: 2x2 end cap: 4x4 end cap: 2x2 inside vertical 45°: 4x4 inside vertical 45°: 2x2 outside vertical 45°: 4x4 outside vertical 45°: 2x2 inside vertical right angle: 4x4 inside vertical right angle: 2x2 outside vertical right angle: 4x4 outside vertical right angle: 4x4 to 2x2 Fiber-Duct ™ Reducer: 2x2 bend radius control trumpet: 4x4 bend radius control trumpet: 4x4 innerduct transition: 4x4 adapter to TE 4x4 FiberGuide*: 4x4 adapter to various 4x4 systems: 2x2 plastic snap rivet: 4x4 plastic snap rivet: Plastic bolts and wing nuts: Plastic bolts and hex nuts: 2x2 vertical tee: 4x4 vertical tee: 1-port spillout to 1.5" I.D. corrugated tubing: 2-port spillout to 1.5" I.D. corrugated tubing: 3-sided vertical tee trumpet spillout: 3-sided BRC trumpet spillout for 2x2 exit: Mounting Brackets Existing 1/2" thr rod brkt: Existing 5/8" thr rod brkt: New 1/2" thr rod brkt: New 5/8" thr rod brkt: Under-floor brkt: Ladder rack brkt: "L" wall mount brkt: Adjustable "Z" bracket: Low profile "Z" bracket: EIA/TIA threaded rod mounting bracket: Two-piece ladder rack 1/2" thr rod: Two-piece ladder rack 5/8" thr rod: Two-piece framing clip 5/8" hr rod to 9/16" C-channel aux. framing bars: S2X2**6NM S4X4**6NM E2X2**6 E4X4**6 C2**6 C4**6 FCF2X2** FCF4X4** FRA2X2** FRA4X4** FT2X2** FT4X4** FFWC2X2** FFWC4X4** FEC2X2** FEC4X4** FIV452X2** FIV454X4** FOV452X2** FOV454X4** FIVRA2X2** FIVRA4X4** FOVRA2X2** FOVRA4X4** FRF42** TRC2BL TRC4BL FITF4X4B FADC4X4 FTDNS4X4** NR2WH NR4BL F14PWN F14PN FVTHD2X2** FVT4X4** FIDT2X2** FIDT4X4BL FTR4X4** FTR2X2** FTRBE12 FTRBE58 FTRBN12 FTRBN58 FUSB FLRB FLB FZBA1.5X4 FZBLP FEIAB58 F2PCLB12 F2PCLB58 FRAFC58 *TE 4x4 FiberGuide Management Systems is a registered trademark of TE Connectivity. **Substitute:YL = Yellow, OR = Orange, BL = Black, and LG = Light Gray. 2x2 and 4x4 Fiber-Duct™ Routing System Channel and Cover S2X2**6NM S4X4**6NM E2X2**6 E4X4**6 C2**6 C4**6 Fittings and Spillouts FCF2X2** FCF4X4** FOVRA2X2** FOVRA4X4** F14PWN FRA2X2** FRA4X4** FT2X2** FT4X4** FRF42** F14PN FFWC2X2** FFWC4X4** TRC2BL TRC4BL FVTHD2X2** FVT4X4* FEC2X2** FEC4X4** FITF4X4B FIV452X2** FIV454X4** FADC4X4 FIDT2X2** FIDT4X4BL FLB FZBA1.5X4 FOV452X2** FOV454X4** FTDNS4X4** FTR4X4** FIVRA2X2** FIVRA4X4** NR2WH NR4BL FTR2X2** Mounting Brackets FTRBE12 FTRBE58 FEIAB58 FTRBN12 FTRBN58 FUSB FLRB FZBLP FRAFC58 F2PCLB12 F2PCLB58 **Substitute: YL = Yellow, OR = Orange, BL = Black, and LG = Light Gray. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2014 Panduit Corp. All rights reserved. FRSP14--WW-ENG Replaces WW-FRSP07 1/2014